- 24 Jun, 2020 40 commits
-
-
Nikolay Aleksandrov authored
This patch adds the ability to notify about activity of any entries (static, permanent or ext_learn). EVPN multihoming peers need it to properly and efficiently handle mac sync (peer active/locally active). We add a new NFEA_ACTIVITY_NOTIFY attribute which is used to dump the current activity state and to control if static entries should be monitored at all. We use 2 bits - one to activate fdb entry tracking (disabled by default) and the second to denote that an entry is inactive. We need the second bit in order to avoid multiple notifications of inactivity. Obviously this makes no difference for dynamic entries since at the time of inactivity they get deleted, while the tracked non-dynamic entries get the inactive bit set and get a notification. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Add an attribute to NDA which will contain all future fdb-specific attributes in order to avoid polluting the NDA namespace with e.g. bridge or vxlan specific attributes. The attribute is called NDA_FDB_EXT_ATTRS and the structure would look like: [NDA_FDB_EXT_ATTRS] = { [NFEA_xxx] } Signed-off-by: -
Nikolay Aleksandrov authored
We can just pass ndm as an argument instead of its fields separately. Signed-off-by:
-
David S. Miller authored
Antoine Tenart says: ==================== net: phy: mscc: PHC and timestamping support This series aims at adding support for PHC and timestamping operations in the MSCC PHY driver, for the VSC858x and VSC8575. Those PHYs are capable of timestamping in 1-step and 2-step for both L2 and L4 traffic. As of this series, only IPv4 support was implemented when using L4 mode. This is because of an hardware limitation which prevents us for supporting both IPv4 and IPv6 at the same time. Implementing support for IPv6 should be quite easy (I do have the modifications needed for the hardware configuration) but I did not see a way to retrieve this information in hwtstamp(). What would you suggest? Those PHYs are distributed in hardware packages containing multiple times the PHY. The VSC8584 for example is composed of 4 PHYs. With hardware packages, parts of the logic is usually common and one of the PHY has to be used for some parts of the initialization. Following this logic, the 1588 blocks of those PHYs are shared between two PHYs and accessing the registers has to be done using the "base" PHY of the group. This is handled thanks to helpers in the PTP code (and locks). We also need the MDIO bus lock while performing a single read or write to the 1588 registers as the read/write are composed of multiple MDIO transactions (and we don't want other threads updating the page). To get and set the PHC time, a GPIO has to be used and changes are only retrieved or committed when on a rising edge. The same GPIO is shared by all PHYs, so the granularity of the lock protecting it has to be different from the ones protecting the 1588 registers (the VSC8584 PHY has 2 1588 blocks, and a single load/save pin). Patch 1 extends the recently added helpers to share information between PHYs of the same hardware package; to allow having part of the probe to be shared (in addition to the already supported init part). This will be used when adding support for PHC/TS to initialize locks. Patches 2 and 3 are mostly cosmetic. Patch 4 takes into account the 1588 block in the MACsec initialization, to allow having both the MACsec and 1588 blocks initialized on a running system. Patches 5 and 6 add support for PHC and timestamping operations in the MSCC driver. An initialization of the 1588 block (plus all the registers definition; and helpers) is added first; and then comes a patch to implement the PHC and timestamping API. Patches 7 and 8 add the required hardware description for device trees, to be able to use the load/save GPIO pin on the PCB120 board. To use this on a PCB120 board, two other series are needed and have already been sent upstream (one is merged). There are no dependency between all those series. Since v3: - Fixed a SKB leak. - Removed ts_lock from the init, as TS and PHC operations aren't registered at this time. - Refectored the ts_base_addr/phy intialization. - Cleaned up the ingr/egr latencies definitons. - Fixed a comment about locking and the shared GPIO. - A few cosmetic fixes. Since v2: - Removed explicit inlines from .c files. - Fixed three warnings. Since v1: - Removed checks in rxtstamp/txtstamp as skb cannot be NULL here. - Reworked get_ptp_header_rx/get_ptp_header. - Reworked the locking logic between the PHC and timestamping operations. - Fixed a compilation issue on x86 reported by Jakub. ==================== Signed-off-by: -
Quentin Schulz authored
This patch adds a description of the load/save GPIN pin, used in the VSC8584 PHY for timestamping operations. The related pinctrl description is also added. Signed-off-by:
Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by:
-
Antoine Tenart authored
A new optional property can be used to reference the load/save GPIO, used for PTP hardware clock (PHC) operations. This patch documents it in the binding documentation. Signed-off-by:
-
Antoine Tenart authored
This patch adds support for PHC and timestamping operations for the MSCC PHY. PTP 1-step and 2-step modes are supported, over Ethernet and UDP. To get and set the PHC time, a GPIO has to be used and changes are only retrieved or committed when on a rising edge. The same GPIO is shared by all PHYs, so the granularity of the lock protecting it has to be different from the ones protecting the 1588 registers (the VSC8584 PHY has 2 1588 blocks, and a single load/save pin). Co-developed-by:
-
Quentin Schulz authored
This patch adds the first parts of the 1588 support in the MSCC PHY, with registers definition and the 1588 block initialization. Those PHYs are distributed in hardware packages containing multiple times the PHY. The VSC8584 for example is composed of 4 PHYs. With hardware packages, parts of the logic is usually common and one of the PHY has to be used for some parts of the initialization. Following this logic, the 1588 blocks of those PHYs are shared between two PHYs and accessing the registers has to be done using the "base" PHY of the group. This is handled thanks to helpers in the PTP code (and locks). We also need the MDIO bus lock while performing a single read or write to the 1588 registers as the read/write are composed of multiple MDIO transactions (and we don't want other threads updating the page). Co-developed-by:
-
Antoine Tenart authored
This patch takes in account the use of the 1588 block in the MACsec initialization, as a conditional configuration has to be done (when the 1588 block is used). Signed-off-by:
-
Quentin Schulz authored
This patch adds a define for the 0x8000 magic value used to perform enable/disable actions on the "token ring clock". The patch is only cosmetic. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Antoine Tenart authored
All headers in the MSCC PHY driver have been copied and pasted from the original mscc.c file. However the information is not necessarily correct, as in the MACsec support. Fix this. Signed-off-by:
-
Antoine Tenart authored
Shared PHYs (PHYs in the same hardware package) may have shared registers and their drivers would usually need to share information. There is currently a way to have a shared (part of the) init, by using phy_package_init_once(). This patch extends the logic to share parts of the probe to allow sharing the initialization of locks or resources retrieval. Signed-off-by:
-
David S. Miller authored
Rahul Lakkireddy says: ==================== cxgb4: fix more warnings reported by sparse Patch 1 ensures all callers take on-chip memory lock when flashing PHY firmware to fix lock context imbalance warnings. Patch 2 moves all static arrays in header file to respective C file in device dump collection path. ==================== Signed-off-by: -
Rahul Lakkireddy authored
Move all arrays related to device dump in header file to C file. Also, move the function that shares the arrays to the same C file. Fixes following warnings reported by make W=1 in several places: cudbg_entity.h:513:18: warning: 't6_hma_ireg_array' defined but not used [-Wunused-const-variable=] 513 | static const u32 t6_hma_ireg_array[][IREG_NUM_ELEM] = { Fixes: a7975a2f ("cxgb4: collect register dump") Fixes: 17b332f4 ("cxgb4: add support to read serial flash") Signed-off-by:Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
-
Rahul Lakkireddy authored
Access to on-chip memory for flashing PHY firmware must always be synchronized. So, ensure the callers take on-chip memory lock. Also fixes following sparse warning: sge.c:1641:26: warning: context imbalance in 't4_load_phy_fw' - different lock contexts for basic block Fixes: 01b69614 ("cxgb4: Add PHY firmware support for T420-BT cards") Fixes: 4ee339e1 ("cxgb4: add support to flash PHY image") Signed-off-by:
-
tannerlove authored
Run rxtimestamp as part of TEST_PROGS. Analogous to other tests, add new rxtimestamp.sh wrapper script, so that the test runs isolated from background traffic in a private network namespace. Also ignore failures of test case #6 by default. This case verifies that a receive timestamp is not reported if timestamp reporting is enabled for a socket, but generation is disabled. Receive timestamp generation has to be enabled globally, as no associated socket is known yet. A background process that enables rx timestamp generation therefore causes a false positive. Ntpd is one example that does. Add a "--strict" option to cause failure in the event that any test case fails, including test #6. This is useful for environments that are known to not have such background processes. Tested: make -C tools/testing/selftests TARGETS="net" run_tests Signed-off-by:
Tanner Love <tannerlove@google.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Mika Westerberg authored
ThunderboltIP protocol currently has two flags from which we only support and set match frags ID. The first flag is reserved for full E2E flow control. Add a comment that clarifies them. Suggested-by:
Yehezkel Bernat <yehezkelshb@gmail.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
-
David S. Miller authored
Calvin Johnson says: ==================== ACPI support for xgmac_mdio drivers. This patch series provides ACPI support for xgmac_mdio driver. Changes in v3: - handle case MDIOBUS_NO_CAP Changes in v2: - Reserve "0" to mean that no mdiobus capabilities have been declared. - bus->id: change to appropriate printk format specifier - clean up xgmac_acpi_match - clariy platform_get_resource() usage with comments ==================== Signed-off-by: -
Jeremy Linton authored
Since we know the xgmac hardware always has a c45 compliant bus, let's try scanning for c22 capable PHYs first. If we fail to find any, then it will fall back to c45 automatically. Signed-off-by:
Jeremy Linton <jeremy.linton@arm.com> Signed-off-by:
Calvin Johnson <calvin.johnson@oss.nxp.com> Signed-off-by:
-
Calvin Johnson authored
Add ACPI support for xgmac MDIO bus registration while maintaining the existing DT support. The function mdiobus_register() inside of_mdiobus_register(), brings up all the PHYs on the mdio bus and attach them to the bus. Signed-off-by:
-
Jeremy Linton authored
The mdiobus_scan logic is currently hardcoded to only work with c22 devices. This works fairly well in most cases, but its possible that a c45 device doesn't respond despite being a standard phy. If the parent hardware is capable, it makes sense to scan for c22 devices before falling back to c45. As we want this to reflect the capabilities of the STA, lets add a field to the mii_bus structure to represent the capability. That way devices can opt into the extended scanning. Existing users should continue to default to c22 only scanning as long as they are zero'ing the structure before use. Signed-off-by:
-
David S. Miller authored
Vaibhav Gupta says: ==================== ethernet: dec: tulip: use generic power management Linux Kernel Mentee: Remove Legacy Power Management. The purpose of this patch series is to remove legacy power management callbacks and invocation of PCI helper functions, from tulip ethernet drivers. With legacy PM, drivers themselves are responsible for handling the device's power states. And they do this with the help of PCI helper functions like pci_enable/disable_device(), pci_set/restore_state(), pci_set_powr_state(), etc. which is not recommended. In generic PM, all the required tasks are handled by PCI core and drivers need to perform device-specific operations only. All patches are compile-tested only. ==================== Signed-off-by: -
Vaibhav Gupta authored
With the support of generic PM callbacks, drivers no longer need to use legacy .suspend() and .resume() in which they had to maintain PCI states changes and device's power state themselves. Legacy PM involves usage of PCI helper functions like pci_enable_wake() which is no longer recommended. Compile-tested only. Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by:
-
Vaibhav Gupta authored
With the support of generic PM callbacks, drivers no longer need to use legacy .suspend() and .resume() in which they had to maintain PCI states changes and device's power state themselves. Earlier, .suspend() and .resume() were invoking pci_disable_device() and pci_enable_device() respectively to manage the device's power state. driver also invoked pci_save/restore_state() and pci_set_power_sitate(). With generic PM, it is no longer needed. The driver is expected to just implement driver-specific operations and leave power transitions to PCI core. Compile-tested only. Signed-off-by:
-
Vaibhav Gupta authored
With the support of generic PM callbacks, drivers no longer need to use legacy .suspend() and .resume() in which they had to maintain PCI states changes and device's power state themselves. Earlier, .suspend() and .resume() were invoking pci_disable_device() and pci_enable_device() respectively to manage the device's power state. With generic PM, it is no longer needed. The driver is expected to just implement driver-specific operations and leave power transitions to PCI core. Compile-tested only. Signed-off-by:
-
Vaibhav Gupta authored
With stable support of generic PM callbacks, drivers no longer need to use legacy .suspend() and .resume() in which they had to maintain PCI states changes and device's power state themselves. Earlier, .resume() was invoking pci_enable_device(). Drivers should not call PCI legacy helper functions, hence, it was removed. This should not change the behavior of the device as this function is called by PCI core if somehow pm_ops is not able to bind with the driver, else, required tasks are managed by the core itself. Compile-tested only. Signed-off-by:
-
Vaibhav Gupta authored
With legacy PM hooks, it was the responsibility of a driver to manage PCI states and also the device's power state. The generic approach is to let the PCI core handle the work. The legacy suspend() and resume() were making use of pci_read/write_config_dword() to enable/disable wol. Driver editing configuration registers of a device is not recommended. Thus replace them all with device_wakeup_enable/disable(). Compile-tested only. Signed-off-by:
-
David S. Miller authored
Vaibhav Gupta says: ==================== ethernet: amd: Convert to generic power management Linux Kernel Mentee: Remove Legacy Power Management. The purpose of this patch series is to remove legacy power management callbacks from amd ethernet drivers. The callbacks performing suspend() and resume() operations are still calling pci_save_state(), pci_set_power_state(), etc. and handling the power management themselves, which is not recommended. The conversion requires the removal of the those function calls and change the callback definition accordingly and make use of dev_pm_ops structure. All patches are compile-tested only. ==================== Signed-off-by: -
Vaibhav Gupta authored
Use dev_pm_ops structure to call generic suspend() and resume() callbacks. Drivers should avoid saving device register and/or change power states using PCI helper functions. With the generic approach, all these are handled by PCI core. Compile-tested only. Signed-off-by:
-
Vaibhav Gupta authored
Drivers should not save device registers and/or change the power state of the device. As per the generic PM approach, these are handled by PCI core. The driver should support dev_pm_ops callbacks and bind them to pci_driver. Compile-tested only. Signed-off-by:
-
Vaibhav Gupta authored
Remove legacy PM callbacks and use generic operations. With legacy code, drivers were responsible for handling PCI PM operations like pci_save_state(). In generic code, all these are handled by PCI core. The generic suspend() and resume() are called at the same point the legacy ones were called. Thus, it does not affect the normal functioning of the driver. Compile-tested only. Signed-off-by:
-
Gaurav Singh authored
dev cannot be NULL here since its already being accessed before. Remove the redundant null check. Signed-off-by:
Gaurav Singh <gaurav1086@gmail.com> Signed-off-by:
-
Gaurav Singh authored
skb cannot be NULL here since its already being accessed before: sock_net(skb->sk). Remove the redundant null check. Signed-off-by:
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. Also, remove unnecessary function ipv6_rpl_srh_alloc_size() and replace kzalloc() with kcalloc(), which has a 2-factor argument form for multiplication. This code was detected with the help of Coccinelle and, audited and fixed manually. Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Gaurav Singh authored
dev cannot be NULL here since its already being accessed before. Remove the redundant null check. Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== net: address some sparse warnings This series adds missing declarations and move others to address W=1 C=1 warnings in tcp and udp. ==================== Signed-off-by: -
Eric Dumazet authored
This removes following warnings : CC net/ipv4/udp_offload.o net/ipv4/udp_offload.c:504:17: warning: no previous prototype for 'udp4_gro_receive' [-Wmissing-prototypes] 504 | struct sk_buff *udp4_gro_receive(struct list_head *head, struct sk_buff *skb) | ^~~~~~~~~~~~~~~~ net/ipv4/udp_offload.c:584:29: warning: no previous prototype for 'udp4_gro_complete' [-Wmissing-prototypes] 584 | INDIRECT_CALLABLE_SCOPE int udp4_gro_complete(struct sk_buff *skb, int nhoff) | ^~~~~~~~~~~~~~~~~ CHECK net/ipv6/udp_offload.c net/ipv6/udp_offload.c:115:16: warning: symbol 'udp6_gro_receive' was not declared. Should it be static? net/ipv6/udp_offload.c:148:29: warning: symbol 'udp6_gro_complete' was not declared. Should it be static? CC net/ipv6/udp_offload.o net/ipv6/udp_offload.c:115:17: warning: no previous prototype for 'udp6_gro_receive' [-Wmissing-prototypes] 115 | struct sk_buff *udp6_gro_receive(struct list_head *head, struct sk_buff *skb) | ^~~~~~~~~~~~~~~~ net/ipv6/udp_offload.c:148:29: warning: no previous prototype for 'udp6_gro_complete' [-Wmissing-prototypes] 148 | INDIRECT_CALLABLE_SCOPE int udp6_gro_complete(struct sk_buff *skb, int nhoff) | ^~~~~~~~~~~~~~~~~ Signed-off-by:Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
This patch removes following (C=1 W=1) warnings for CONFIG_RETPOLINE=y : net/ipv4/tcp_offload.c:306:16: warning: symbol 'tcp4_gro_receive' was not declared. Should it be static? net/ipv4/tcp_offload.c:306:17: warning: no previous prototype for 'tcp4_gro_receive' [-Wmissing-prototypes] net/ipv4/tcp_offload.c:319:29: warning: symbol 'tcp4_gro_complete' was not declared. Should it be static? net/ipv4/tcp_offload.c:319:29: warning: no previous prototype for 'tcp4_gro_complete' [-Wmissing-prototypes] CHECK net/ipv6/tcpv6_offload.c net/ipv6/tcpv6_offload.c:16:16: warning: symbol 'tcp6_gro_receive' was not declared. Should it be static? net/ipv6/tcpv6_offload.c:29:29: warning: symbol 'tcp6_gro_complete' was not declared. Should it be static? CC net/ipv6/tcpv6_offload.o net/ipv6/tcpv6_offload.c:16:17: warning: no previous prototype for 'tcp6_gro_receive' [-Wmissing-prototypes] 16 | struct sk_buff *tcp6_gro_receive(struct list_head *head, struct sk_buff *skb) | ^~~~~~~~~~~~~~~~ net/ipv6/tcpv6_offload.c:29:29: warning: no previous prototype for 'tcp6_gro_complete' [-Wmissing-prototypes] 29 | INDIRECT_CALLABLE_SCOPE int tcp6_gro_complete(struct sk_buff *skb, int thoff) | ^~~~~~~~~~~~~~~~~ Signed-off-by: -
Eric Dumazet authored
Declare ipv4_specific once, in tcp.h were it belongs. Signed-off-by:
-
Eric Dumazet authored
ipv6_specific should be declared in tcp include files, not mptcp. This removes the following warning : CHECK net/ipv6/tcp_ipv6.c net/ipv6/tcp_ipv6.c:78:42: warning: symbol 'ipv6_specific' was not declared. Should it be static? Signed-off-by:
-
