- 01 Feb, 2024 36 commits
-
-
Matthieu Baerts (NGI0) authored
Since the "Fixes" commit mentioned below, "userspace pm" subtests of mptcp_join selftests introduced in v6.5 are launching the whole transfer in the background, do the required checks, then wait for the end of transfer. There is no need to wait longer, especially because the checks at the end of the transfer are ignored (which is fine). This saves quite a few seconds in slow environments. Note that old versions will need commit bdbef0a6 ("selftests: mptcp: add mptcp_lib_kill_wait") as well to get 'mptcp_lib_kill_wait()' helper. Fixes: 4369c198 ("selftests: mptcp: test userspace pm out of transfer") Cc: stable@vger.kernel.org # 6.5.x: bdbef0a6: selftests: mptcp: add mptcp_lib_kill_wait Cc: stable@vger.kernel.org # 6.5.x Reviewed-and-tested-by:
Geliang Tang <geliang@kernel.org> Signed-off-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-8-4c1c11e571ff@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Matthieu Baerts (NGI0) authored
If a CI executes the same selftest multiple times with different options, all results from the same subtests will have the same title, which confuse the CI. With the same title printed in TAP, the tests are considered as the same ones. Now, it is possible to override this prefix by using MPTCP_LIB_KSFT_TEST env var, and have a different title. While at it, use 'basename' to remove the suffix as well instead of using an extra 'sed'. Fixes: c4192967 ("selftests: mptcp: lib: format subtests results in TAP") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts (NGI0) authored
When running the simult_flow selftest in slow environments -- e.g. QEmu without KVM support --, the results can be unstable. This selftest checks if the aggregated bandwidth is (almost) fully used as expected. To help improving the stability while still keeping the same validation in place, the BW and the delay are reduced to lower the pressure on the CPU. Fixes: 1a418cb8 ("mptcp: simult flow self-tests") Fixes: 219d0499 ("mptcp: push pending frames when subflow has free space") Cc: stable@vger.kernel.org Suggested-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Matthieu Baerts (NGI0) authored
On very slow environments -- e.g. when QEmu is used without KVM --, mptcp_join.sh selftest can take a bit more than 20 minutes. Bump the default timeout by 50% as it seems normal to take that long on some environments. When a debug kernel config is used, this selftest will take even longer, but that's certainly not a common test env to consider for the timeout. The Fixes tag that has been picked here is there simply to help having this patch backported to older stable versions. It is difficult to point to the exact commit that made some env reaching the timeout from time to time. Fixes: d17b968b ("selftests: mptcp: increase timeout to 20 minutes") Cc: stable@vger.kernel.org Acked-by:
-
Matthieu Baerts (NGI0) authored
Since the commit mentioned below, 'mptcp_join' selftests is using IPTables to add rules to the Mangle table, only in IPv4. This KConfig is usually enabled by default in many defconfig, but we recently noticed that some CI were running our selftests without them enabled. Fixes: b6e074e1 ("selftests: mptcp: add infinite map testcase") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
Since the commit mentioned below, 'mptcp_join' selftests is using IPTables to add rules to the Filter table for IPv6. It is then required to have IP6_NF_FILTER KConfig. This KConfig is usually enabled by default in many defconfig, but we recently noticed that some CI were running our selftests without them enabled. Fixes: 523514ed ("selftests: mptcp: add ADD_ADDR IPv6 test cases") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
Since the commit mentioned below, 'mptcp_join' selftests is using IPTables to add rules to the Filter table. It is then required to have IP_NF_FILTER KConfig. This KConfig is usually enabled by default in many defconfig, but we recently noticed that some CI were running our selftests without them enabled. Fixes: 8d014eaa ("selftests: mptcp: add ADD_ADDR timeout test case") Cc: stable@vger.kernel.org Reviewed-by:
-
Paolo Abeni authored
When the MPTCP PM detects that a subflow is stale, all the packet scheduler must re-inject all the mptcp-level unacked data. To avoid acquiring unneeded locks, it first try to check if any unacked data is present at all in the RTX queue, but such check is currently broken, as it uses TCP-specific helper on an MPTCP socket. Funnily enough fuzzers and static checkers are happy, as the accessed memory still belongs to the mptcp_sock struct, and even from a functional perspective the recovery completed successfully, as the short-cut test always failed. A recent unrelated TCP change - commit d5fed5ad ("tcp: reorganize tcp_sock fast path variables") - exposed the issue, as the tcp field reorganization makes the mptcp code always skip the re-inection. Fix the issue dropping the bogus call: we are on a slow path, the early optimization proved once again to be evil. Fixes: 1e1d9d6f ("mptcp: handle pending data on closed subflow") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/468Signed-off-by:
Mat Martineau <martineau@kernel.org> Signed-off-by:
-
Paolo Abeni authored
The rtnetlink tests require additional options currently off by default. Fixes: 2766a111 ("selftests: rtnetlink: add ipsec offload API test") Fixes: 5e596ee1 ("selftests: add xfrm state-policy-monitor to rtnetlink.sh") Signed-off-by:
-
Jakub Kicinski authored
amt test uses the TTL iptables module: ip netns exec "${RELAY}" iptables -t mangle -I PREROUTING \ -d 239.0.0.1 -j TTL --ttl-set 2 Fixes: c08e8bae ("selftests: add amt interface selftest script") Link: https://lore.kernel.org/r/20240131165605.4051645-1-kuba@kernel.orgSigned-off-by: -
Jakub Kicinski authored
Benjamin Poirier says: ==================== selftests: net: More small fixes Some small fixes for net selftests which follow from these recent commits: dd2d40ac ("selftests: bonding: Add more missing config options") 49078c1b ("selftests: forwarding: Remove executable bits from lib.sh") ==================== Link: https://lore.kernel.org/r/20240131140848.360618-1-bpoirier@nvidia.comSigned-off-by:
-
Benjamin Poirier authored
Some scripts are not tests themselves; they contain utility functions used by other tests. According to Documentation/dev-tools/kselftest.rst, such files should be listed in TEST_FILES. Currently they are incorrectly listed in TEST_PROGS_EXTENDED so rename the variable. Fixes: c085dbfb ("selftests/net/forwarding: define libs as TEST_PROGS_EXTENDED") Suggested-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
Benjamin Poirier <bpoirier@nvidia.com> Link: https://lore.kernel.org/r/20240131140848.360618-6-bpoirier@nvidia.comSigned-off-by:
-
Benjamin Poirier authored
Some scripts are not tests themselves; they contain utility functions used by other tests. According to Documentation/dev-tools/kselftest.rst, such files should be listed in TEST_FILES. Move those utility scripts to TEST_FILES. Fixes: 1751eb42 ("selftests: net: use TEST_PROGS_EXTENDED") Fixes: 25ae948b ("selftests/net: add lib.sh") Fixes: b99ac184 ("kselftests/net: add missed setup_loopback.sh/setup_veth.sh to Makefile") Fixes: f5173fe3 ("selftests: net: included needed helper in the install targets") Suggested-by:
-
Benjamin Poirier authored
setup_loopback.sh and net_helper.sh are meant to be sourced from other scripts, not executed directly. Therefore, remove the executable bits from those files' permissions. This change is similar to commit 49078c1b ("selftests: forwarding: Remove executable bits from lib.sh") Fixes: 7d157501 ("selftests/net: GRO coalesce test") Fixes: 3bdd9fd2 ("selftests/net: synchronize udpgro tests' tx and rx connection") Suggested-by:
-
Benjamin Poirier authored
The purpose of the test_LAG_cleanup() function is to check that some hardware addresses are removed from underlying devices after they have been unenslaved. The test function simply checks that those addresses are not present at the end. However, if the addresses were never added to begin with due to some error in device setup, the test function currently passes. This is a false positive since in that situation the test did not actually exercise the intended functionality. Add a check that the expected addresses are indeed present after device setup. This makes the test function more robust. I noticed this problem when running the team/dev_addr_lists.sh test on a system without support for dummy and ipv6: tools/testing/selftests/drivers/net/team# ./dev_addr_lists.sh Error: Unknown device type. Error: Unknown device type. This program is not intended to be run as root. RTNETLINK answers: Operation not supported TEST: team cleanup mode lacp [ OK ] Fixes: bbb774d9 ("net: Add tests for bonding and team address list management") Signed-off-by:
-
Benjamin Poirier authored
Similar to commit dd2d40ac ("selftests: bonding: Add more missing config options"), add more networking-specific config options which are needed for team device tests. For testing, I used the minimal config generated by virtme-ng and I added the options in the config file. Afterwards, the team device test passed. Fixes: bbb774d9 ("net: Add tests for bonding and team address list management") Reviewed-by:
-
Souradeep Chakrabarti authored
In commit ac504767 ("hv_netvsc: Disable NAPI before closing the VMBus channel"), napi_disable was getting called for all channels, including all subchannels without confirming if they are enabled or not. This caused hv_netvsc getting hung at napi_disable, when netvsc_probe() has finished running but nvdev->subchan_work has not started yet. netvsc_subchan_work() -> rndis_set_subchannel() has not created the sub-channels and because of that netvsc_sc_open() is not running. netvsc_remove() calls cancel_work_sync(&nvdev->subchan_work), for which netvsc_subchan_work did not run. netif_napi_add() sets the bit NAPI_STATE_SCHED because it ensures NAPI cannot be scheduled. Then netvsc_sc_open() -> napi_enable will clear the NAPIF_STATE_SCHED bit, so it can be scheduled. napi_disable() does the opposite. Now during netvsc_device_remove(), when napi_disable is called for those subchannels, napi_disable gets stuck on infinite msleep. This fix addresses this problem by ensuring that napi_disable() is not getting called for non-enabled NAPI struct. But netif_napi_del() is still necessary for these non-enabled NAPI struct for cleanup purpose. Call trace: [ 654.559417] task:modprobe state:D stack: 0 pid: 2321 ppid: 1091 flags:0x00004002 [ 654.568030] Call Trace: [ 654.571221] <TASK> [ 654.573790] __schedule+0x2d6/0x960 [ 654.577733] schedule+0x69/0xf0 [ 654.581214] schedule_timeout+0x87/0x140 [ 654.585463] ? __bpf_trace_tick_stop+0x20/0x20 [ 654.590291] msleep+0x2d/0x40 [ 654.593625] napi_disable+0x2b/0x80 [ 654.597437] netvsc_device_remove+0x8a/0x1f0 [hv_netvsc] [ 654.603935] rndis_filter_device_remove+0x194/0x1c0 [hv_netvsc] [ 654.611101] ? do_wait_intr+0xb0/0xb0 [ 654.615753] netvsc_remove+0x7c/0x120 [hv_netvsc] [ 654.621675] vmbus_remove+0x27/0x40 [hv_vmbus] Cc: stable@vger.kernel.org Fixes: ac504767 ("hv_netvsc: Disable NAPI before closing the VMBus channel") Signed-off-by:
Souradeep Chakrabarti <schakrabarti@linux.microsoft.com> Reviewed-by:
Dexuan Cui <decui@microsoft.com> Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/1706686551-28510-1-git-send-email-schakrabarti@linux.microsoft.comSigned-off-by:
-
Jan Beulich authored
Invoking the make_tx_response() / push_tx_responses() pair with no lock held would be acceptable only if all such invocations happened from the same context (NAPI instance or dealloc thread). Since this isn't the case, and since the interface "spec" also doesn't demand that multicast operations may only be performed with no in-flight transmits, MCAST_{ADD,DEL} processing also needs to acquire the response lock around the invocations. To prevent similar mistakes going forward, "downgrade" the present functions to private helpers of just the two remaining ones using them directly, with no forward declarations anymore. This involves renaming what so far was make_tx_response(), for the new function of that name to serve the new (wrapper) purpose. While there, - constify the txp parameters, - correct xenvif_idx_release()'s status parameter's type, - rename {,_}make_tx_response()'s status parameters for consistency with xenvif_idx_release()'s. Fixes: 210c34dc ("xen-netback: add support for multicast control") Cc: stable@vger.kernel.org Signed-off-by:Jan Beulich <jbeulich@suse.com> Reviewed-by:
Paul Durrant <paul@xen.org> Link: https://lore.kernel.org/r/980c6c3d-e10e-4459-8565-e8fbde122f00@suse.comSigned-off-by:
-
Breno Leitao authored
The documentation is pointing to the wrong path for the interface. Documentation is pointing to /sys/class/<iface>, instead of /sys/class/net/<iface>. Fix it by adding the `net/` directory before the interface. Fixes: 1a02ef76 ("net: sysfs: add documentation entries for /sys/class/<iface>/queues") Signed-off-by:
Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240131102150.728960-2-leitao@debian.orgSigned-off-by:
-
Geetha sowjanya authored
XDP queues are created/destroyed when a XDP program is attached/detached. In current driver xdp_queues are not getting destroyed on program exit due to incorrect xdp_queue and tot_tx_queue count values. This patch fixes the issue by setting tot_tx_queue and xdp_queue count to correct values. It also fixes xdp.data_hard_start address. Fixes: 06059a1a ("octeontx2-pf: Add XDP support to netdev PF") Signed-off-by:
Geetha sowjanya <gakula@marvell.com> Link: https://lore.kernel.org/r/20240130120610.16673-1-gakula@marvell.comSigned-off-by:
-
Jakub Kicinski authored
Paolo Abeni says: ==================== selftests: net: a few pmtu.sh fixes This series try to address CI failures for the pmtu.sh tests. It does _not_ attempt to enable all the currently skipped cases, to avoid adding more entropy. Tested with: make -C tools/testing/selftests/ TARGETS=net install vng --build --config tools/testing/selftests/net/config vng --run . --user root -- \ ./tools/testing/selftests/kselftest_install/run_kselftest.sh \ -t net:pmtu.sh ==================== Link: https://lore.kernel.org/r/cover.1706635101.git.pabeni@redhat.comSigned-off-by:
-
Paolo Abeni authored
When running the pmtu.sh via the kselftest infra, accessing /dev/stdout gives unexpected results: # dd: failed to open '/dev/stdout': Device or resource busy # TEST: IPv4, bridged vxlan4: PMTU exceptions [FAIL] Let dd use directly the standard output to fix the above: # TEST: IPv4, bridged vxlan4: PMTU exceptions - nexthop objects [ OK ] Fixes: 136a1b43 ("selftests: net: test vxlan pmtu exceptions with tcp") Signed-off-by:
Guillaume Nault <gnault@redhat.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/23d7592c5d77d75cff9b34f15c227f92e911c2ae.1706635101.git.pabeni@redhat.comSigned-off-by:
-
Paolo Abeni authored
The pmtu.sh test tries to detect the tunnel protocols available in the running kernel and properly skip the unsupported cases. In a few more complex setup, such detection is unsuccessful, as the script currently ignores some intermediate error code at setup time. Before: # which: no nettest in (/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin) # TEST: vti6: PMTU exceptions (ESP-in-UDP) [FAIL] # PMTU exception wasn't created after creating tunnel exceeding link layer MTU # ./pmtu.sh: line 931: kill: (7543) - No such process # ./pmtu.sh: line 931: kill: (7544) - No such process After: # xfrm4 not supported # TEST: vti4: PMTU exceptions [SKIP] Fixes: ece1278a ("selftests: net: add ESP-in-UDP PMTU test") Signed-off-by:
-
Paolo Abeni authored
The mentioned test uses a few Kconfig still missing the net config, add them. Before: # Error: Specified qdisc kind is unknown. # Error: Specified qdisc kind is unknown. # Error: Qdisc not classful. # We have an error talking to the kernel # Error: Qdisc not classful. # We have an error talking to the kernel # policy_routing not supported # TEST: ICMPv4 with DSCP and ECN: PMTU exceptions [SKIP] After: # TEST: ICMPv4 with DSCP and ECN: PMTU exceptions [ OK ] Fixes: ec730c3e ("selftest: net: Test IPv4 PMTU exceptions with DSCP and ECN") Signed-off-by:
-
Jakub Kicinski authored
Brett Creeley says: ==================== pds_core: Various fixes This series includes the following changes: There can be many users of the pds_core's adminq. This includes pds_core's uses and any clients that depend on it. When the pds_core device goes through a reset for any reason the adminq is freed and reconfigured. There are some gaps in the current implementation that will cause crashes during reset if any of the previously mentioned users of the adminq attempt to use it after it's been freed. Issues around how resets are handled, specifically regarding the driver's error handlers. Originally these patches were aimed at net-next, but it was requested to push the fixes patches to net. The original patches can be found here: https://lore.kernel.org/netdev/20240126174255.17052-1-brett.creeley@amd.com/ Also, the Reviewed-by tags were left in place from net-next reviews as the patches didn't change. ==================== Link: https://lore.kernel.org/r/20240129234035.69802-1-brett.creeley@amd.comSigned-off-by:
-
Brett Creeley authored
Currently the teardown/setup flow for driver probe/remove is quite a bit different from the reset flows in pdsc_fw_down()/pdsc_fw_up(). One key piece that's missing are the calls to pci_alloc_irq_vectors() and pci_free_irq_vectors(). The pcie reset case is calling pci_free_irq_vectors() on reset_prepare, but not calling the corresponding pci_alloc_irq_vectors() on reset_done. This is causing unexpected/unwanted interrupt behavior due to the adminq interrupt being accidentally put into legacy interrupt mode. Also, the pci_alloc_irq_vectors()/pci_free_irq_vectors() functions are being called directly in probe/remove respectively. Fix this inconsistency by making the following changes: 1. Always call pdsc_dev_init() in pdsc_setup(), which calls pci_alloc_irq_vectors() and get rid of the now unused pds_dev_reinit(). 2. Always free/clear the pdsc->intr_info in pdsc_teardown() since this structure will get re-alloced in pdsc_setup(). 3. Move the calls of pci_free_irq_vectors() to pdsc_teardown() since pci_alloc_irq_vectors() will always be called in pdsc_setup()->pdsc_dev_init() for both the probe/remove and reset flows. 4. Make sure to only create the debugfs "identity" entry when it doesn't already exist, which it will in the reset case because it's already been created in the initial call to pdsc_dev_init(). Fixes: ffa55858 ("pds_core: implement pci reset handlers") Signed-off-by:Brett Creeley <brett.creeley@amd.com> Reviewed-by:
Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240129234035.69802-7-brett.creeley@amd.comSigned-off-by:
-
Brett Creeley authored
During reset the BARs might be accessed when they are unmapped. This can cause unexpected issues, so fix it by clearing the cached BAR values so they are not accessed until they are re-mapped. Also, make sure any places that can access the BARs when they are NULL are prevented. Fixes: 49ce92fb ("pds_core: add FW update feature to devlink") Signed-off-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20240129234035.69802-6-brett.creeley@amd.comSigned-off-by:
-
Brett Creeley authored
There are multiple paths that can result in using the pdsc's adminq. [1] pdsc_adminq_isr and the resulting work from queue_work(), i.e. pdsc_work_thread()->pdsc_process_adminq() [2] pdsc_adminq_post() When the device goes through reset via PCIe reset and/or a fw_down/fw_up cycle due to bad PCIe state or bad device state the adminq is destroyed and recreated. A NULL pointer dereference can happen if [1] or [2] happens after the adminq is already destroyed. In order to fix this, add some further state checks and implement reference counting for adminq uses. Reference counting was used because multiple threads can attempt to access the adminq at the same time via [1] or [2]. Additionally, multiple clients (i.e. pds-vfio-pci) can be using [2] at the same time. The adminq_refcnt is initialized to 1 when the adminq has been allocated and is ready to use. Users/clients of the adminq (i.e. [1] and [2]) will increment the refcnt when they are using the adminq. When the driver goes into a fw_down cycle it will set the PDSC_S_FW_DEAD bit and then wait for the adminq_refcnt to hit 1. Setting the PDSC_S_FW_DEAD before waiting will prevent any further adminq_refcnt increments. Waiting for the adminq_refcnt to hit 1 allows for any current users of the adminq to finish before the driver frees the adminq. Once the adminq_refcnt hits 1 the driver clears the refcnt to signify that the adminq is deleted and cannot be used. On the fw_up cycle the driver will once again initialize the adminq_refcnt to 1 allowing the adminq to be used again. Fixes: 01ba61b5 ("pds_core: Add adminq processing and commands") Signed-off-by: -
Brett Creeley authored
The initial design for the adminq interrupt was done based on client drivers having their own adminq and adminq interrupt. So, each client driver's adminq isr would use their specific adminqcq for the private data struct. For the time being the design has changed to only use a single adminq for all clients. So, instead use the struct pdsc for the private data to simplify things a bit. This also has the benefit of not dereferencing the adminqcq to access the pdsc struct when the PDSC_S_STOPPING_DRIVER bit is set and the adminqcq has actually been cleared/freed. Fixes: 01ba61b5 ("pds_core: Add adminq processing and commands") Signed-off-by:
-
Brett Creeley authored
There is a small window where pdsc_work_thread() calls pdsc_process_adminq() and pdsc_process_adminq() passes the PDSC_S_STOPPING_DRIVER check and starts to process adminq/notifyq work and then the driver starts a fw_down cycle. This could cause some undefined behavior if the notifyqcq/adminqcq are free'd while pdsc_process_adminq() is running. Use cancel_work_sync() on the adminqcq's work struct to make sure any pending work items are cancelled and any in progress work items are completed. Also, make sure to not call cancel_work_sync() if the work item has not be initialized. Without this, traces will happen in cases where a reset fails and teardown is called again or if reset fails and the driver is removed. Fixes: 01ba61b5 ("pds_core: Add adminq processing and commands") Signed-off-by:
-
Brett Creeley authored
The PCIe reset handlers can run at the same time as the health thread. This can cause the health thread to stomp on the PCIe reset. Fix this by preventing the health thread from running while a PCIe reset is happening. As part of this use timer_shutdown_sync() during reset and remove to make sure the timer doesn't ever get rearmed. Fixes: ffa55858 ("pds_core: implement pci reset handlers") Signed-off-by:
-
Eric Dumazet authored
syzbot reported a lockdep splat [1]. Blamed commit hinted about the possible lockdep violation, and code used unix_state_lock_nested() in an attempt to silence lockdep. It is not sufficient, because unix_state_lock_nested() is already used from unix_state_double_lock(). We need to use a separate subclass. This patch adds a distinct enumeration to make things more explicit. Also use swap() in unix_state_double_lock() as a clean up. v2: add a missing inline keyword to unix_state_lock_nested() [1] WARNING: possible circular locking dependency detected 6.8.0-rc1-syzkaller-00356-g8a696a29 #0 Not tainted syz-executor.1/2542 is trying to acquire lock: ffff88808b5df9e8 (rlock-AF_UNIX){+.+.}-{2:2}, at: skb_queue_tail+0x36/0x120 net/core/skbuff.c:3863 but task is already holding lock: ffff88808b5dfe70 (&u->lock/1){+.+.}-{2:2}, at: unix_dgram_sendmsg+0xfc7/0x2200 net/unix/af_unix.c:2089 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&u->lock/1){+.+.}-{2:2}: lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 _raw_spin_lock_nested+0x31/0x40 kernel/locking/spinlock.c:378 sk_diag_dump_icons net/unix/diag.c:87 [inline] sk_diag_fill+0x6ea/0xfe0 net/unix/diag.c:157 sk_diag_dump net/unix/diag.c:196 [inline] unix_diag_dump+0x3e9/0x630 net/unix/diag.c:220 netlink_dump+0x5c1/0xcd0 net/netlink/af_netlink.c:2264 __netlink_dump_start+0x5d7/0x780 net/netlink/af_netlink.c:2370 netlink_dump_start include/linux/netlink.h:338 [inline] unix_diag_handler_dump+0x1c3/0x8f0 net/unix/diag.c:319 sock_diag_rcv_msg+0xe3/0x400 netlink_rcv_skb+0x1df/0x430 net/netlink/af_netlink.c:2543 sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:280 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x7e6/0x980 net/netlink/af_netlink.c:1367 netlink_sendmsg+0xa37/0xd70 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] sock_write_iter+0x39a/0x520 net/socket.c:1160 call_write_iter include/linux/fs.h:2085 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xa74/0xca0 fs/read_write.c:590 ksys_write+0x1a0/0x2c0 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b -> #0 (rlock-AF_UNIX){+.+.}-{2:2}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x1909/0x5ab0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162 skb_queue_tail+0x36/0x120 net/core/skbuff.c:3863 unix_dgram_sendmsg+0x15d9/0x2200 net/unix/af_unix.c:2112 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x592/0x890 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmmsg+0x3b2/0x730 net/socket.c:2724 __do_sys_sendmmsg net/socket.c:2753 [inline] __se_sys_sendmmsg net/socket.c:2750 [inline] __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2750 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&u->lock/1); lock(rlock-AF_UNIX); lock(&u->lock/1); lock(rlock-AF_UNIX); *** DEADLOCK *** 1 lock held by syz-executor.1/2542: #0: ffff88808b5dfe70 (&u->lock/1){+.+.}-{2:2}, at: unix_dgram_sendmsg+0xfc7/0x2200 net/unix/af_unix.c:2089 stack backtrace: CPU: 1 PID: 2542 Comm: syz-executor.1 Not tainted 6.8.0-rc1-syzkaller-00356-g8a696a29 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 check_noncircular+0x366/0x490 kernel/locking/lockdep.c:2187 check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x1909/0x5ab0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162 skb_queue_tail+0x36/0x120 net/core/skbuff.c:3863 unix_dgram_sendmsg+0x15d9/0x2200 net/unix/af_unix.c:2112 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x592/0x890 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmmsg+0x3b2/0x730 net/socket.c:2724 __do_sys_sendmmsg net/socket.c:2753 [inline] __se_sys_sendmmsg net/socket.c:2750 [inline] __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2750 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b RIP: 0033:0x7f26d887cda9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f26d95a60c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00007f26d89abf80 RCX: 00007f26d887cda9 RDX: 000000000000003e RSI: 00000000200bd000 RDI: 0000000000000004 RBP: 00007f26d88c947a R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000008c0 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f26d89abf80 R15: 00007ffcfe081a68 Fixes: 2aac7a2c ("unix_diag: Pending connections IDs NLA") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240130184235.1620738-1-edumazet@google.comSigned-off-by:
-
Jakub Kicinski authored
Dmitry Safonov says: ==================== selftests/net: A couple of typos fixes in key-management/rst tests Two typo fixes, noticed by Mohammad's review. And a fix for an issue that got uncovered. v1: https://lore.kernel.org/r/20240118-tcp-ao-test-key-mgmt-v1-0-3583ca147113@arista.comSigned-off-by:
Dmitry Safonov <dima@arista.com> ==================== Link: https://lore.kernel.org/r/20240130-tcp-ao-test-key-mgmt-v2-0-d190430a6c60@arista.comSigned-off-by:
-
Dmitry Safonov authored
Currently, the test is racy and seems to not pass anymore. In order to rectify it, aim on TCP_TW_RST. Doesn't seem way too good with this sleep() part, but it seems as a reasonable compromise for the test. There is a plan in-line comment on how-to improve it, going to do it on the top, at this moment I want it to run on netdev/patchwork selftests dashboard. It also slightly changes tcp_ao-lib in order to get SO_ERROR propagated to test_client_verify() return value. Fixes: c6df7b23 ("selftests/net: Add TCP-AO RST test") Signed-off-by:
-
Dmitry Safonov authored
As the names of (struct test_key) members didn't reflect whether the key was used for TX or RX, the verification for the counters was done incorrectly for asymmetrical selftests. Rename these with _tx appendix and fix checks in verify_counters(). While at it, as the checks are now correct, introduce skip_counters_checks, which is intended for tests where it's expected that a key that was set with setsockopt(sk, IPPROTO_TCP, TCP_AO_INFO, ...) might had no chance of getting used on the wire. Fixes the following failures, exposed by the previous commit: > not ok 51 server: Check current != rnext keys set before connect(): Counter pkt_good was expected to increase 0 => 0 for key 132:5 > not ok 52 server: Check current != rnext keys set before connect(): Counter pkt_good was not expected to increase 0 => 21 for key 137:10 > > not ok 63 server: Check current flapping back on peer's RnextKey request: Counter pkt_good was expected to increase 0 => 0 for key 132:5 > not ok 64 server: Check current flapping back on peer's RnextKey request: Counter pkt_good was not expected to increase 0 => 40 for key 137:10 Cc: Mohammad Nassiri <mnassiri@ciena.com> Fixes: 3c3ead55 ("selftests/net: Add TCP-AO key-management test") Signed-off-by:
-
Mohammad Nassiri authored
The end_server() function only operates in the server thread and always takes an accept socket instead of a listen socket as its input argument. To align with this, invert the boolean values used when calling verify_counters() within the end_server() function. As a result of this typo, the test didn't correctly check for the non-symmetrical scenario, where i.e. peer-A uses a key <100:200> to send data, but peer-B uses another key <105:205> to send its data. So, in simple words, different keys for TX and RX. Fixes: 3c3ead55 ("selftests/net: Add TCP-AO key-management test") Signed-off-by:
Mohammad Nassiri <mnassiri@ciena.com> Link: https://lore.kernel.org/all/934627c5-eebb-4626-be23-cfb134c01d1a@arista.com/ [amended 'Fixes' tag, added the issue description and carried-over to lkml] Signed-off-by:
-
- 31 Jan, 2024 4 commits
-
-
Andrew Lunn authored
Not all mv88e6xxx device support C45 read/write operations. Those which do not return -EOPNOTSUPP. However, when phylib scans the bus, it considers this fatal, and the probe of the MDIO bus fails, which in term causes the mv88e6xxx probe as a whole to fail. When there is no device on the bus for a given address, the pull up resistor on the data line results in the read returning 0xffff. The phylib core code understands this when scanning for devices on the bus. C45 allows multiple devices to be supported at one address, so phylib will perform a few reads at each address, so although thought not the most efficient solution, it is a way to avoid fatal errors. Make use of this as a minimal fix for stable to fix the probing problems. Follow up patches will rework how C45 operates to make it similar to C22 which considers -ENODEV as a none-fatal, and swap mv88e6xxx to using this. Cc: stable@vger.kernel.org Fixes: 743a19e3 ("net: dsa: mv88e6xxx: Separate C22 and C45 transactions") Reported-by:
Tim Menninger <tmenninger@purestorage.com> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20240129224948.1531452-1-andrew@lunn.chSigned-off-by:
-
Zhipeng Lu authored
When inetdev_valid_mtu fails, cork->opt should be freed if it is allocated in ip_setup_cork. Otherwise there could be a memleak. Fixes: 501a90c9 ("inet: protect against too small mtu values.") Signed-off-by:
Zhipeng Lu <alexious@zju.edu.cn> Reviewed-by:
-
Andrew Halaney authored
Bhupesh's email responds indicating they've changed employers and with no new contact information. Let's drop the line from MAINTAINERS to avoid getting the same response over and over. Signed-off-by:
Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20240129-remove-dwmac-qcom-ethqos-reviewer-v1-1-2645eab61451@redhat.comSigned-off-by:
-
Matthias May authored
l2_tos_ttl_inherit.sh verifies the inheritance of tos and ttl for GRETAP, VXLAN and GENEVE. Before testing it checks if the required module is available and if not skips the tests accordingly. Currently only GRETAP and VXLAN are tested because the GENEVE module is missing. Fixes: b690842d ("selftests/net: test l2 tunnel TOS/TTL inheriting") Signed-off-by:
Matthias May <matthias.may@westermo.com> Link: https://lore.kernel.org/r/20240130101157.196006-1-matthias.may@westermo.comSigned-off-by:
-
