- 08 Jul, 2005 23 commits
-
-
Milton Miller authored
Be thorough in our exit routine, since it says it is there to be so. Unregistering without registering is safe (checked in 2.6.10). Signed-off-by:
Milton Miller <miltonm@bga.com> Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Milton Miller authored
Guard the MAGIC_SYSRQ ^O to be just on the console channel. Make the other channels more transparent. Signed-off-by:
-
Milton Miller authored
Have the hvc console code try to pull characters immediately when receiving an interrupt, and kick the poll thread only if the immediate poll indicates it needed a call back to do more work. Signed-off-by:
-
Milton Miller authored
Use the vterm numbers to match the vio devices being probed with the indices already allocated via the console initcall function hvc_find_vtys. The old code required hvc_find_vtys to "guess" the matching devices the vio subsystem would find and its probe order. Signed-off-by:
-
Milton Miller authored
Milton Miller has done a lot of work to clean up our hvc_console code. One of the important things the following patch series does is separate the VIO layer from the hvc_console code. With the VIO specific code removed any ppc64 platform, or even any architecture, can use hvc_console as a generic polling console. You simply have to supply a get_chars and put_chars method and hvc_console does the rest of the work. You can even use it for an interrupt driven console. This patch: Rearrange the code in drivers/char/hvc_console.c to make future patches smaller. No actual code changes, just ordering of the functions in the file. Signed-off-by:
-
Anton Blanchard authored
We already have a prototype for sys_remap_file_pages (239) so there is no need to reserve it twice. Signed-off-by:
-
Anton Blanchard authored
- Clean up sys32_getpriority comment. - Add ioprio syscalls, and sign extend 32bit versions. Signed-off-by:
-
Anton Blanchard authored
Remove some unnecessary includes, an out of date comment and a prototype for sys_timer_create (which is now in syscalls.h) Signed-off-by:
-
Anton Blanchard authored
- Make ioprio syscalls return long, like set/getpriority syscalls. - Move function prototypes into syscalls.h so we can pick them up in the 32/64bit compat code. Signed-off-by:
Jens Axboe <axboe@suse.de> Signed-off-by:
-
Anton Blanchard authored
Enable the runlatch at the start of each exception. Unfortunately we are out of space in the 0x300 handler, so I added it a bit later. The SPR write is fairly expensive, perhaps we should cache the runlatch state in the paca and avoid the write when possible. We don't need to turn the runlatch off, we do that in the idle loop. Better to take the hit in the idle loop than for each exception exit. Signed-off-by:
-
Anton Blanchard authored
Not all ppc64 CPUs have the CTRL SPR, so we need a cputable feature for it. Signed-off-by:
-
Anton Blanchard authored
Use c99 initialisers in the cputable code. Signed-off-by:
-
Olaf Hering authored
Patch from <amodra@bigpond.net.au>, http://sources.redhat.com/bugzilla/show_bug.cgi?id=1042 /usr/bin/ld: arch/ppc64/kernel/vdso32/vdso32.so: The first section in the PT_DYNAMIC segment is not the .dynamic section Signed-off-by:
Olaf Hering <olh@suse.de> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
This patch adds support for some new PHY models to sungem as used on some recent Apple iMac G5 models. Signed-off-by:
-
Sam Ravnborg authored
Using the syntax: make dir/module.ko kbuild now allows one to build a module including the final link stage. This is usefull when one only wants to compile a single module and thus do not have to wait until a full kernel has finished compiling. Tested by: randy_dunlap <rdunlap@xenotime.net> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
George Anzinger authored
make O=/dir TAGS fails with: MAKE TAGS find: security/selinux/include: No such file or directory find: include: No such file or directory find: include/asm-i386: No such file or directory find: include/asm-generic: No such file or directory The problem is in this line: ifeq ($(KBUILD_OUTPUT),) KBUILD_OUTPUT is not defined (ever) after make reruns itself. This line is used in the TAGS, tags, and cscope makes. Signed-off-by:George Anzinger <george@mvista.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Anton Blanchard authored
We now print statistics when invoking the OOM killer, however this information is not rate limited and you can get into situations where the console is continually spammed. For example, when a task is exiting the OOM killer will simply return (waiting for that task to exit and clear up memory). If the VM continually calls back into the OOM killer we get thousands of copies of show_mem() on the console. Use printk_ratelimit() to quieten it. Signed-off-by:
-
Marcelo Tosatti authored
Remove completly bogus comment from did_some_progress != 0 handling (that same comment is a few lines below on did_some_progress = 0 case, where it belongs). Signed-off-by:
-
Marcelo Tosatti authored
Dump the current allocation order when OOM killing. Signed-off-by:
-
Mark Fasheh authored
OCFS2 wants to mark an inode which has been orphaned by another node so that during final iput it takes the correct path through the VFS and can pass through the OCFS2 delete_inode callback. Since i_nlink can get out of date with other nodes, the best way I see to accomplish this is by clearing i_nlink on those inodes at drop_inode time. Other than this small amount of work, nothing different needs to happen, so I think it would be cleanest to be able to just call generic_drop_inode at the end of the OCFS2 drop_inode callback. Signed-off-by:
Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by:
-
Andrew Morton authored
Various stuff missing on alpha: drivers/message/i2o/config-osm.c:35: error: field `fops' has incomplete type drivers/message/i2o/config-osm.c: In function `sysfs_create_fops_file': drivers/message/i2o/config-osm.c:71: error: storage size of `tmp' isn't known drivers/message/i2o/config-osm.c:78: error: dereferencing pointer to incomplete type drivers/message/i2o/config-osm.c:81: error: dereferencing pointer to incomplete type Signed-off-by:
-
Andrew Morton authored
We get sporadic reports of `__iounmap: bad address' coming out. Add a dump_stack() to find the culprit. Try to identify which subsystem is having iounmap() problems. Signed-off-by:
-
Jeff Dike authored
There is absolutely no reason to flush the kernel's VM area during a tlb_flush_mm. This results in a noticable performance increase in the kernel build benchmark. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Cc: Paolo Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
-
- 07 Jul, 2005 5 commits
-
-
Linus Torvalds authored
-
Jack Steiner authored
Disable the tiocx driver on non-SN systems. Signed-off-by:
Jack Steiner <steiner@sgi.com> Signed-off-by:
Tony Luck <tony.luck@intel.com>
-
Linus Torvalds authored
-
Tony Luck authored
Jesse Barnes provided the original version of this patch months ago, but other changes kept conflicting with it, so it got deferred. Greg Edwards dug it out of obscurity just over a week ago, and almost immediately another conflicting patch appeared (Bob Picco's memory-less nodes). I've resolved the conflicts and got it running again. CONFIG_SGI_TIOCX is set to "y" in defconfig, which causes a Tiger to not boot (oops in tiocx_init). But that can be resolved later ... get this in now before it gets stale again. Signed-off-by: -
-
- 06 Jul, 2005 12 commits
-
-
Ivan Kokshaysky authored
There is a slight disagreement between setup-bus.c code and traditional x86 PCI setup wrt which recourses are invalid vs resources that are free for further allocations. In particular, in the setup-bus.c, if we failed to allocate some resource, we nullify "start" and "flags" fields, but *not* the "end" one. But x86 pcibios_enable_resources() does the following check: if (!r->start && r->end) { printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev)); return -EINVAL; which means that the device owning the offending resource cannot be enabled. In particular, this breaks cardbus behind the normal decode p2p bridge - the cardbus code from setup-bus.c requests rather large IO and MEM windows, and if it fails, the socket is completely unavailable. Which is wrong, as the yenta code is capable to allocate smaller windows. Signed-off-by:Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by:
-
bob.picco authored
I reworked how nodes with only CPUs are treated. The patch below seems simpler to me and has eliminated the complicated routine reassign_cpu_only_nodes. There isn't any longer the requirement to modify ACPI NUMA information which was in large part the complexity introduced in reassign_cpu_only_nodes. This patch will produce a different number of nodes. For example, reassign_cpu_only_nodes would reduce two CPUonly nodes and one memory node configuration to one memory+CPUs node configuration. This patch doesn't change the number of nodes which means the user will see three. Two nodes without memory and one node with all the memory. While doing this patch, I noticed that early_nr_phys_cpus_node isn't serving any useful purpose. It is called once in find_pernode_space but the value isn't used to computer pernode space. Signed-off-by:
bob.picco <bob.picco@hp.com> Signed-off-by:
-
Signed-off-by:
Keith Owens <kaos@sgi.com> Signed-off-by:
-
Eddie C. Dost authored
Call ebus_dma_enable() before calling ebus_dma_request(), otherwise ebus_dma_request() returns -EINVAL and enable_dma() calls BUG()... Signed-off-by:David S. Miller <davem@davemloft.net>
-
Eddie C. Dost authored
Signed-off-by: -
Eddie C. Dost authored
Do not cat bucket->irq_info to struct irqaction * directly, but go through struct irq_desc *. Signed-off-by: -
Linus Torvalds authored
-
Eddie C. Dost authored
Signed-off-by: -
Tony Luck authored
-
Keith Owens authored
restore_sigcontext calls ia64_set_local_fpu_owner() which requires that preempt be disabled. Signed-off-by:
-
Prarit Bhargava authored
This patch fixes an issue with the PROM and a kernel running with CONFIG_PREEMPT enabled. When CONFIG_PREEMPT is enabled, the size of a spinlock_t changes -- resulting in the PROM writing to an incorrect location. Signed-off-by:
Prarit Bhargava <prarit@sgi.com> Signed-off-by:
-
Prarit Bhargava authored
This patch is the SGI hotplug driver and additional changes required for the driver. These modifications include changes to the SN io_init.c code for memory management, the inclusion of new SAL calls to enable and disable PCI slots, and a hotplug-style driver. Signed-off-by:
-
