- 13 Jun, 2016 14 commits
-
-
Imre Deak authored
Rename these remaining function prefixes to better align with the corresponding SKL functions. No functional change. Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com>
-
Imre Deak authored
So far we configured a static lane latency optimization during driver loading/resuming. The specification changed at one point and now this configuration depends on the lane count, so move the configuration to modeset time accordingly. It's not clear when this lane configuration takes effect. The specification only requires that the programming is done before enabling the port. On CHV OTOH the lanes start to power up already right after enabling the PLL. To be safe preserve the current order and set things up already before enabling the PLL. v2: (Ander) - Simplify the optimization mask calculation. - Use the correct pipe_config always during the calculation instead of the bogus intel_crtc->config. CC: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95476Signed-off-by:
-
Imre Deak authored
So far we depended on the HW to dynamically power down unused PHYs and so we enabled them manually once during driver loading/resuming. There are indications however that we can achieve better power savings by manual powering toggling. So make the PHY enabling/disabling to happen on-demand whenever we need either the corresponding AUX or port functionality. CHV does this already by enabling the PHY along the corresponding PHY common lane power wells there, do the same on BXT by adding virtual power wells for the same purpose. Also sanity check the common lane power down ack signal from the PHY. Do this only when the PHY is enabled, since it's not clear at what point the HW power/clock gates things. While at it rename broxton_ prefix to bxt_ in related function names to better align with the SKL code. Signed-off-by:
-
Imre Deak authored
These helpers will be needed by the next patch, so factor them out. No functional change. v2: - Move the refcount==0 WARN to the new put helper. (Ville) CC: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Imre Deak authored
A follow-up patch moves the PHY enabling to the power well code where enabling/disabling the PHYs will happen independently. Because of this waiting for the GRC calibration in PHY1 asynchronously would need some additional logic. Instead of adding that let's keep things simple for now and wait synchronously. My measurements showed that the calibration takes ~4ms. Signed-off-by:
-
Gerd Hoffmann authored
Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465821536-21312-1-git-send-email-kraxel@redhat.com
-
Dan Carpenter authored
It seems pretty clear that bitwise OR was intended here and not logical OR. Fixes: 6fc29133 ('drm/i915/gen9: Add WaDisableSkipCaching') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com>
-
Lukas Wunner authored
Calling drm_framebuffer_unregister_private() in intel_fbdev_destroy() is superfluous because the framebuffer will subsequently be unregistered by drm_framebuffer_free() when unreferenced in drm_framebuffer_remove(). The call is a leftover, when it was introduced by commit 36206361 ("drm: revamp framebuffer cleanup interfaces"), struct intel_framebuffer was still embedded in struct intel_fbdev rather than being a pointer as it is today, and drm_framebuffer_remove() wasn't used yet. As a bonus, the ID of the framebuffer is no longer 0 in the debug log: Before: [ 39.680874] [drm:drm_mode_object_unreference] OBJ ID: 0 (3) [ 39.680878] [drm:drm_mode_object_unreference] OBJ ID: 0 (2) [ 39.680884] [drm:drm_mode_object_unreference] OBJ ID: 0 (1) After: [ 102.504649] [drm:drm_mode_object_unreference] OBJ ID: 45 (3) [ 102.504651] [drm:drm_mode_object_unreference] OBJ ID: 45 (2) [ 102.504654] [drm:drm_mode_object_unreference] OBJ ID: 45 (1) Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/5031860caad67faa0f1be5965331ef048a311a01.1465383212.git.lukas@wunner.de
-
Tim Gore authored
This patch enables a workaround for a mid thread preemption issue where a hardware timing problem can prevent the context restore from happening, leading to a hang. v2: move to gen9_init_workarounds (Arun) v3: move to start of gen9_init_workarounds (Arun) Signed-off-by:
Tim Gore <tim.gore@intel.com> Reviewed-by:
Arun Siluvery <arun.siluvery@linux.intel.com> Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465816501-25557-1-git-send-email-tim.gore@intel.com
-
Ankitprasad Sharma authored
This patch adds support for extending the pread/pwrite functionality for objects not backed by shmem. The access will be made through gtt interface. This will cover objects backed by stolen memory as well as other non-shmem backed objects. v2: Drop locks around slow_user_access, prefault the pages before access (Chris) v3: Rebased to the latest drm-intel-nightly (Ankit) v4: Moved page base & offset calculations outside the copy loop, corrected data types for size and offset variables, corrected if-else braces format (Tvrtko/kerneldocs) v5: Enabled pread/pwrite for all non-shmem backed objects including without tiling restrictions (Ankit) v6: Using pwrite_fast for non-shmem backed objects as well (Chris) v7: Updated commit message, Renamed i915_gem_gtt_read to i915_gem_gtt_copy, added pwrite slow path for non-shmem backed objects (Chris/Tvrtko) v8: Updated v7 commit message, mutex unlock around pwrite slow path for non-shmem backed objects (Tvrtko) v9: Corrected check during pread_ioctl, to avoid shmem_pread being called for non-shmem backed objects (Tvrtko) v10: Moved the write_domain check to needs_clflush and tiling mode check to pwrite_fast (Chris) v11: Use pwrite_fast fallback for all objects (shmem and non-shmem backed), call fast_user_write regardless of pagefault in previous iteration v12: Use page-by-page copy for slow user access too (Chris) v13: Handled EFAULT, Avoid use of WARN_ON, put_fence only if whole obj pinned (Chris) v14: Corrected datatypes/initializations (Tvrtko) Testcase: igt/gem_stolen, igt/gem_pread, igt/gem_pwrite Signed-off-by:
Ankitprasad Sharma <ankitprasad.r.sharma@intel.com> Reviewed-by:
-
Ankitprasad Sharma authored
In pwrite_fast, map an object page by page if obj_ggtt_pin fails. First, we try a nonblocking pin for the whole object (since that is fastest if reused), then failing that we try to grab one page in the mappable aperture. It also allows us to handle objects larger than the mappable aperture (e.g. if we need to pwrite with vGPU restricting the aperture to a measely 8MiB or something like that). v2: Pin pages before starting pwrite, Combined duplicate loops (Chris) v3: Combined loops based on local patch by Chris (Chris) v4: Added i915 wrapper function for drm_mm_insert_node_in_range (Chris) v5: Renamed wrapper function for drm_mm_insert_node_in_range (Chris) v5: Added wrapper for drm_mm_remove_node() (Chris) v6: Added get_pages call before pinning the pages (Tvrtko) Added remove_mappable_node() wrapper for drm_mm_remove_node() (Chris) v7: Added size argument for insert_mappable_node (Tvrtko) v8: Do not put_pages after pwrite, do memset of node in the wrapper function (insert_mappable_node) (Chris) v9: Rebase (Ankit) Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Chris Wilson authored
This utility function is a companion to i915_gem_object_get_page() that uses the same cached iterator for the scatterlist to perform fast sequential lookup of the dma address associated with any page within the object. Signed-off-by:
-
Chris Wilson authored
Introduced a new vm specfic callback insert_page() to program a single pte in ggtt or ppgtt. This allows us to map a single page in to the mappable aperture space. This can be iterated over to access the whole object by using space as meagre as page size. v2: Added low level rpm assertions to insert_page routines (Chris) v3: Added POSTING_READ post register write (Tvrtko) v4: Rebase (Ankit) v5: Removed wmb() and FLUSH_CTL from insert_page, caller to take care of it (Chris) v6: insert_page not working correctly without FLSH_CNTL write, added the write again. Signed-off-by:
-
Dave Gordon authored
If the user doesn't override the default values of the GuC-related kernel parameters, then on a non-GuC-based platform we shouldn't mention that we haven't loaded the GuC firmware. The various messages have been reordered into a least->most severe cascade (none/INFO/INFO/ERROR) for ease of comprehension. Signed-off-by:
Dave Gordon <david.s.gordon@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
- 09 Jun, 2016 1 commit
-
-
Daniel Vetter authored
This reverts commit f165d283. It breaks one of our CI systems. Quoting from Ville: [ 13.100979] [drm:ironlake_init_pch_refclk] has_panel 1 has_lvds 1 has_ck505 0 using_ssc_source 1 [ 13.101413] ------------[ cut here ]------------ [ 13.101429] kernel BUG at drivers/gpu/drm/i915/intel_display.c:8528! "which is the 'BUG_ON(val != final)' at the end of ironlake_init_pch_refclk()." Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lyude <cpaul@redhat.com> Cc: marius.c.vlad@intel.com References: https://www.spinics.net/lists/dri-devel/msg109557.htmlAcked-by:
Lyude <cpaul@redhat.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com>
-
- 08 Jun, 2016 25 commits
-
-
Mika Kuoppala authored
Add this fbc related workaround for all gen9 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Mika Kuoppala authored
Bspec states that we need to set nuke on modify all to prevent screen corruption with fbc on skl and kbl. v2: proper workaround name References: HSD#2227109, HSDES#1404569388 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Mika Kuoppala authored
Set bit 8 in 0x43224 to prevent screen corruption and system hangs on high memory bandwidth conditions. The same wa also suggest setting bit 31 on ARB_CTL. According to another workaround we gain better idle power savings when FBC is enabled. v2: use correct workaround name v3: split out overlapping wa for corruption avoidance (Ville) References: HSD#2137218, HSD#2227171, HSD#2136579, BSID#883 Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Mika Kuoppala authored
According to bspec this prevents screen corruption when fbc is used. v2: This workaround has a name, use it (Ville) v3: remove bogus gen check on ilk/vlv wm path (Ville) References: HSD#2135555, HSD#2137270, BSID#562 Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Mika Kuoppala authored
This workaround for bdw and chv, is also needed for kbl A0. References: HSD#1911519, BSID#569 Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-24-git-send-email-mika.kuoppala@intel.com
-
Mika Kuoppala authored
There is ambiguity in the documentation between D0 and E0. Extend this workaround to E0. References: BSID#779 Signed-off-by:
-
Mika Kuoppala authored
Workaround for display underrun issues with Y & Yf Tiling. Set this on all gen9 as stated by bspec. v2: proper workaround name References: HSD#2136383, BSID#857 Signed-off-by:
-
Mika Kuoppala authored
This is needed for all kbl revision. v2: Don't add revid checks to generic gen9 init (Arun) References: HSD#2135593 Signed-off-by:
-
Mika Kuoppala authored
We need to disable clock gating in this unit to work around hardware issue causing possible corruption/hang. v2: name the bit (Ville) v3: leave the fix enabled for 2227050 and set correct bit (Matthew) v4: Split out the skl part in separate commit for easier backport References: HSD#2227156, HSD#2227050 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Signed-off-by:
-
Mika Kuoppala authored
Add this workaround for A0 and B0 revisions References: HSD#2226935 Signed-off-by:
-
Mika Kuoppala authored
This workaround is for fbc working with rc6 on skylake. Bspec states that setting this bit needs to be coordinated with uncore but offers no further details. v2: rebase References: HSD#4712857 Signed-off-by:
-
Mika Kuoppala authored
Make sure that we never enable skip caching on gen9 by accident. References: HSD#2134698 Signed-off-by:
-
Mika Kuoppala authored
Add this workaround for both bxt and kbl up to until rev B0. References: HSD#2136703 Signed-off-by:
-
Mika Kuoppala authored
Bspec states that we need to turn off dynamic credit sharing on kbl revid a0 and b0. This happens by writing bit 28 on 0x4ab8. References: HSD#2225601, HSD#2226938, HSD#2225763 Signed-off-by:
-
Mika Kuoppala authored
According to bspec we need to disable gam unit clock gating on on kbl revids A0 and B0. References: HSD#2226858, HSD#1944358 Signed-off-by:
-
Mika Kuoppala authored
The bspec states that these must be set in CONFIG0 for all gen9. v2: rebase v3: fix spacing (Matthew) References: HSD#2134995 Signed-off-by:
-
Mika Kuoppala authored
Extend the scope of this workaround, already used in skl, to also take effect in kbl. v2: Fix KBL_REVID_E0 (Matthew) References: HSD#2132677 Cc: Matthew Auld <matthew.william.auld@gmail.com> Signed-off-by:
-
Mika Kuoppala authored
According to bspec this workaround helps to reduce lag and improve performance on edp. Documentation suggests this for bdw and all gen9. However evidence shows that this register is missing on gen9 and causing unclaimed mmio access if we access it. So apply to bdw only where the reg exists and can hold its value. v2: drop skl References: HSD#2134579 Signed-off-by:
-
Mika Kuoppala authored
Add this workaround until upto kbl revid B0. References: HSD#1802092 Signed-off-by:
-
Mika Kuoppala authored
Add this workaround for kbl revid A0 only. v2: rebase v3: carve out a non related workaround (Chris) References: HSD#1911714 Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Mika Kuoppala authored
We need this crucial workaround from skl also to all kbl revisions. Lack of it was causing system hangs on skl enabling so this is a must have. v2: Don't add revid checks to gen9 init workarounds (Arun) References: HSD#2126660 Cc: Arun Siluvery <arun.siluvery@linux.intel.com> Signed-off-by:
-
Mika Kuoppala authored
Past evidence with system hangs and hsds tie WaForceEnableNonCoherent and WaDisableHDCInvalidation to WaForceContextSaveRestoreNonCoherent. Documentation states that WaForceContextSaveRestoreNonCoherent would not be needed on skl past E0 but evidence proved otherwise. See commit <510650e8> ("drm/i915/skl: Fix spurious gpu hang with gt3/gt4 revs"). In this scope consider kbl to be skl with a bigger revision than E0 so play it safe and bind these two workarounds to the WaForceContextSaveRestoreNonCoherent, and apply to all gen9. v2: fix comment (Matthew) References: HSD#2134449, HSD#2131413 Signed-off-by:
-
Mika Kuoppala authored
The revision id range for this workaround has changed. So apply it to all revids on all gen9. References: HSD#2134449 Signed-off-by:
-
Mika Kuoppala authored
We need this for kbl a0 boards. Note that this should be also for bxt A0 but we omit that on purpose as bxt A0's are out of fashion already. References: HSD#1912158, HSD#4393097 Signed-off-by:
-
Mika Kuoppala authored
Add REVID macro for kbl to limit wa applicability to particular revision range. Signed-off-by:
-
