This patch removes the no longer used EXPORT_SYMBOL(inet_listen_wlock).
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch removes the unused EXPORT_SYMBOL_GPL(__inet_hash_connect).
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the ingress qdisc members of struct net_device from the transmit
cache line to the receive cache line to avoid cache line ping-pong.
These members are only used on the receive path.
Signed-off-by: Neil Turton <nturton@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a race in Linux kernel file net/core/dev.c, function dev_close.
The function calls function dev_deactivate, which calls function
dev_watchdog_down that deletes the watchdog timer. However, after that, a
driver can call netif_carrier_ok, which calls function
__netdev_watchdog_up that can add the watchdog timer again. Function
unregister_netdevice calls function dev_shutdown that traps the bug
!timer_pending(&dev->watchdog_timer). Moving dev_deactivate after
netif_running() has been cleared prevents function netif_carrier_on
from calling __netdev_watchdog_up and adding the watchdog timer again.
Signed-off-by: Matti Linnanvuori <mattilinnanvuori@yahoo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Al Viro spotted a bogus use of u64 on the input sequence number which
is big-endian.  This patch fixes it by giving the input sequence number
its own member in the xfrm_skb_cb structure.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

In do_setlink() a single notification is sent at the end of the
function if any modification occured. If the address has been changed,
another notification is sent.

Both of them is required because originally only the NETDEV_CHANGEADDR
notification was sent and although device state change implies address
change, some programs may expect the original notification. It remains
for compatibity.

If set_operstate() is called from do_setlink(), it doesn't send a
notification, only if it is called from rtnl_create_link() as earlier.
Signed-off-by: Laszlo Attila Toth <panther@balabit.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

This one is called from under this config only, so move
it in the same place.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some code declares variables on the stack, but uses them
under #ifdef CONFIG_IPV6, so thay become unused when ipv6
is off. Fortunately, they are used in a switch's case
branches, so the fix is rather simple.

Is it OK from coding style POV to add braces inside "cases",
or should I better avoid such style and rework the patch?
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The audit_log_start() will expand into an empty do { } while (0)
construction and the audit_ctx becomes unused.

The solution: push current->audit_context into audit_log_start()
directly, since it is not required in any other place in the 
calling function.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The genl_unregister_family() calls the genl_unregister_mc_groups(), 
which takes and releases the genl_lock and then locks and releases
this lock itself.

Relax this behavior, all the more so the genl_unregister_mc_groups() 
is called from genl_unregister_family() only.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, if the call to netlbl_domhsh_search succeeds the
return result will still be NULL.

Fix that, by returning the found entry (if any).
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch removes unused declaration of dflt_rt_lookup() method in
include/net/ndisc.h
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix comment for skb_pull_rcsum
Signed-off-by: Urs Thuermann <urs@isnogud.escape.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is a long-standing bug in the IPsec IPv6 code that breaks
when we emit a IPsec tunnel-mode datagram packet.  The problem
is that the code the emits the packet assumes the IPv6 stack
will fragment it later, but the IPv6 stack assumes that whoever
is emitting the packet is going to pre-fragment the packet.

In the long term we need to fix both sides, e.g., to get the
datagram code to pre-fragment as well as to get the IPv6 stack
to fragment locally generated tunnel-mode packet.

For now this patch does the second part which should make it
work for the IPsec host case.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Frank Blaschka provided the bug report and the initial suggested fix
for this bug.  He also validated this version of this fix.

The problem is that the access to neigh->arp_queue is inconsistent, we
grab references when dropping the lock lock to call
neigh->ops->solicit() but this does not prevent other threads of
control from trying to send out that packet at the same time causing
corruptions because both code paths believe they have exclusive access
to the skb.

The best option seems to be to hold the write lock on neigh->lock
during the ->solicit() call.  I looked at all of the ndisc_ops
implementations and this seems workable.  The only case that needs
special care is the IPV4 ARP implementation of arp_solicit().  It
wants to take neigh->lock as a reader to protect the header entry in
neigh->ha during the emission of the soliciation.  We can simply
remove the read lock calls to take care of that since holding the lock
as a writer at the caller providers a superset of the protection
afforded by the existing read locking.

The rest of the ->solicit() implementations don't care whether the
neigh is locked or not.
Signed-off-by: David S. Miller <davem@davemloft.net>

Arjan:

  With the help of kerneloops.org I've spotted a nice little interaction
  between the TTY layer and the bluetooth code, however the tty layer is not
  something I'm all too familiar with so I rather ask than brute-force fix the
  code incorrectly.

  The raw details are at:
  http://www.kerneloops.org/search.php?search=uart_flush_buffer

  What happens is that, on closing the bluetooth tty, the tty layer goes
  into the release_dev() function, which first does a bunch of stuff, then
  sets the file->private_data to NULL, does some more stuff and then calls the
  ldisc close function.  Which in this case, is hci_uart_tty_close().

  Now, hci_uart_tty_close() calls hci_uart_close() which clears some
  internal bit, and then calls hci_uart_flush()...  which calls back to the
  tty layers' uart_flush_buffer() function.  (in drivers/bluetooth/hci_tty.c
  around line 194) Which then WARN_ON()'s because that's not allowed/supposed
  to be called this late in the shutdown of the port....

  Should the bluetooth driver even call this flush function at all??

David:

  This seems to be what happens: Hci_uart_close() flushes using
  hci_uart_flush().  Subsequently, in hci_dev_do_close(), (one step in
  hci_unregister_dev()), hci_uart_flush() is called again.  The comment in
  uart_flush_buffer(), relating to the WARN_ON(), indicates you can't flush
  after the port is closed; which sounds reasonable.  I think hci_uart_close()
  should set hdev->flush to NULL before returning.  Hci_dev_do_close() does
  check for this.  The code path is rather involved and I'm not entirely clear
  of all steps, but I think that's what should be done.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch changes current use of: init_timer(), add_timer()
and del_timer() to setup_timer() with mod_timer(), which
should be safer anyway.
Reported-by: Jann Traschewski <jann@gmx.de>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to one of Jann's OOPS reports it looks like
BUG_ON(timer_pending(timer)) triggers during add_timer()
in ax25_start_t1timer(). This patch changes current use
of: init_timer(), add_timer() and del_timer() to
setup_timer() with mod_timer(), which should be safer
anyway.
Reported-by: Jann Traschewski <jann@gmx.de>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

> =================================
> [ INFO: inconsistent lock state ]
> 2.6.24-dg8ngn-p02 #1
> ---------------------------------
> inconsistent {softirq-on-W} -> {in-softirq-R} usage.
> linuxnet/3046 [HC0[0]:SC1[2]:HE1:SE0] takes:
>  (ax25_route_lock){--.+}, at: [<f8a0cfb7>] ax25_get_route+0x18/0xb7 [ax25]
> {softirq-on-W} state was registered at:
...

This lockdep report shows that ax25_route_lock is taken for reading in
softirq context, and for writing in process context with BHs enabled.
So, to make this safe, all write_locks in ax25_route.c are changed to
_bh versions.

Reported-by: Jann Traschewski <jann@gmx.de>,
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This lockdep warning:

> =======================================================
> [ INFO: possible circular locking dependency detected ]
> 2.6.24 #3
> -------------------------------------------------------
> swapper/0 is trying to acquire lock:
>  (ax25_list_lock){-+..}, at: [<f91dd3b1>] ax25_destroy_socket+0x171/0x1f0 [ax25]
>
> but task is already holding lock:
>  (slock-AF_AX25){-+..}, at: [<f91dbabc>] ax25_std_heartbeat_expiry+0x1c/0xe0 [ax25]
>
> which lock already depends on the new lock.
...

shows that ax25_list_lock and slock-AF_AX25 are taken in different
order: ax25_info_show() takes slock (bh_lock_sock(ax25->sk)) while
ax25_list_lock is held, so reversely to other functions. To fix this
the sock lock should be moved to ax25_info_start(), and there would
be still problem with breaking ax25_list_lock (it seems this "proper"
order isn't optimal yet). But, since it's only for reading proc info
it seems this is not necessary (e.g.  ax25_send_to_raw() does similar
reading without this lock too).

So, this patch removes sock lock to avoid deadlock possibility; there
is also used sock_i_ino() function, which reads sk_socket under proper
read lock. Additionally printf format of this i_ino is changed to %lu.
Reported-by: Bernard Pidoux F6BVP <f6bvp@free.fr>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use key/offset caching to change /proc/net/route (use by iputils route)
from O(n^2) to O(n). This improves performance from 30sec with 160,000
routes to 1sec.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This fixes possible problems when trie_firstleaf() returns NULL
to trie_leafindex().
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Various RFCs have all sorts of things to say about the CS field of the
DSCP value.  In particular they try to make the distinction between
values that should be used by "user applications" and things like
routing daemons.

This seems to have influenced the CAP_NET_ADMIN check which exists for
IP_TOS socket option settings, but in fact it has an off-by-one error
so it wasn't allowing CS5 which is meant for "user applications" as
well.

Further adding to the inconsistency and brokenness here, IPV6 does not
validate the DSCP values specified for the IPV6_TCLASS socket option.

The real actual uses of these TOS values are system specific in the
final analysis, and these RFC recommendations are just that, "a
recommendation".  In fact the standards very purposefully use
"SHOULD" and "SHOULD NOT" when describing how these values can be
used.

In the final analysis the only clean way to provide consistency here
is to remove the CAP_NET_ADMIN check.  The alternatives just don't
work out:

1) If we add the CAP_NET_ADMIN check to ipv6, this can break existing
   setups.

2) If we just fix the off-by-one error in the class comparison in
   IPV4, certain DSCP values can be used in IPV6 but not IPV4 by
   default.  So people will just ask for a sysctl asking to
   override that.

I checked several other freely available kernel trees and they
do not make any privilege checks in this area like we do.  For
the BSD stacks, this goes back all the way to Stevens Volume 2
and beyond.
Signed-off-by: David S. Miller <davem@davemloft.net>

Even if we don't want to register the WMI driver, we should initialize
the wmi_blocks list to be empty, since we don't want the wmi helper
functions to oops just because that basic list has not even been set up.

With this, "find_guid()" will happily return "not found" rather than
oopsing all over the place, and the callers will then just automatically
return false or AE_NOT_FOUND as appropriate.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The makefile magic for installing the 32-bit vdso images on disk had a
little error.  A single-line change would fix that bug, but this does a
little more to reduce the error-prone duplication of this bit of
makefile variable magic.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Kosaki Motohito noted that "numactl --interleave=all ..." failed in the
presence of memoryless nodes.  This patch attempts to fix that problem.

Some background:

numactl --interleave=all calls set_mempolicy(2) with a fully populated
[out to MAXNUMNODES] nodemask.  set_mempolicy() [in do_set_mempolicy()]
calls contextualize_policy() which requires that the nodemask be a
subset of the current task's mems_allowed; else EINVAL will be returned.

A task's mems_allowed will always be a subset of node_states[N_HIGH_MEMORY]
i.e., nodes with memory.  So, a fully populated nodemask will be
declared invalid if it includes memoryless nodes.

  NOTE:  the same thing will occur when running in a cpuset
         with restricted mem_allowed--for the same reason:
         node mask contains dis-allowed nodes.

mbind(2), on the other hand, just masks off any nodes in the nodemask
that are not included in the caller's mems_allowed.

In each case [mbind() and set_mempolicy()], mpol_check_policy() will
complain [again, resulting in EINVAL] if the nodemask contains any
memoryless nodes.  This is somewhat redundant as mpol_new() will remove
memoryless nodes for interleave policy, as will bind_zonelist()--called
by mpol_new() for BIND policy.

Proposed fix:

1) modify contextualize_policy logic to:
   a) remember whether the incoming node mask is empty.
   b) if not, restrict the nodemask to allowed nodes, as is
      currently done in-line for mbind().  This guarantees
      that the resulting mask includes only nodes with memory.

      NOTE:  this is a [benign, IMO] change in behavior for
             set_mempolicy().  Dis-allowed nodes will be
             silently ignored, rather than returning an error.

   c) fold this code into mpol_check_policy(), replace 2 calls to
      contextualize_policy() to call mpol_check_policy() directly
      and remove contextualize_policy().

2) In existing mpol_check_policy() logic, after "contextualization":
   a) MPOL_DEFAULT:  require that in coming mask "was_empty"
   b) MPOL_{BIND|INTERLEAVE}:  require that contextualized nodemask
      contains at least one node.
   c) add a case for MPOL_PREFERRED:  if in coming was not empty
      and resulting mask IS empty, user specified invalid nodes.
      Return EINVAL.
   c) remove the now redundant check for memoryless nodes

3) remove the now redundant masking of policy nodes for interleave
   policy from mpol_new().

4) Now that mpol_check_policy() contextualizes the nodemask, remove
   the in-line nodes_and() from sys_mbind().  I believe that this
   restores mbind() to the behavior before the memoryless-nodes
   patch series.  E.g., we'll no longer treat an invalid nodemask
   with MPOL_PREFERRED as local allocation.

[ Patch history:

  v1 -> v2:
   - Communicate whether or not incoming node mask was empty to
     mpol_check_policy() for better error checking.
   - As suggested by David Rientjes, remove the now unused
     cpuset_nodes_subset_current_mems_allowed() from cpuset.h

  v2 -> v3:
   - As suggested by Kosaki Motohito, fold the "contextualization"
     of policy nodemask into mpol_check_policy().  Looks a little
     cleaner. ]
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Fix build for sim_defconfig

So I spent a while pounding my head against my monitor trying to figure
out the vmsplice() vulnerability - how could a failure to check for
*read* access turn into a root exploit? It turns out that it's a buffer
overflow problem which is made easy by the way get_user_pages() is
coded.

In particular, "len" is a signed int, and it is only checked at the
*end* of a do {} while() loop.  So, if it is passed in as zero, the loop
will execute once and decrement len to -1.  At that point, the loop will
proceed until the next invalid address is found; in the process, it will
likely overflow the pages array passed in to get_user_pages().

I think that, if get_user_pages() has been asked to grab zero pages,
that's what it should do.  Thus this patch; it is, among other things,
enough to block the (already fixed) root exploit and any others which
might be lurking in similar code.  I also think that the number of pages
should be unsigned, but changing the prototype of this function probably
requires some more careful review.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  mlx4_core: Fix build break (missing include)

Matt is already the maintainer of SLOB which is one of the "SLAB" allocators in
the kernel so add him to MAINTAINERS.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  sata_mv: platform driver allocs dma without create
  pata_ninja32: setup changes
  pata_legacy: typo fix
  pata_amd: Note in the module description it handles Nvidia
  sata_mv: fix loop with last port
  libata: ignore deverr on SETXFER if mode is configured
  pata_via: fix SATA cable detection on cx700

This avoids warnings with unreferenced variables in the !NUMA case.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 313abe55 ("mlx4_core: For 64-bit systems, vmap() kernel queue
buffers") caused this to pop up on powerpc allyesconfig, looks like a
missing include file:

    drivers/net/mlx4/alloc.c: In function 'mlx4_buf_alloc':
    drivers/net/mlx4/alloc.c:162: error: implicit declaration of function 'vmap'
    drivers/net/mlx4/alloc.c:162: error: 'VM_MAP' undeclared (first use in this function)
    drivers/net/mlx4/alloc.c:162: error: (Each undeclared identifier is reported only once
    drivers/net/mlx4/alloc.c:162: error: for each function it appears in.)
    drivers/net/mlx4/alloc.c:162: warning: assignment makes pointer from integer without a cast
    drivers/net/mlx4/alloc.c: In function 'mlx4_buf_free':
    drivers/net/mlx4/alloc.c:187: error: implicit declaration of function 'vunmap'
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Commit bdc80787 broke the build
for this config because the sim_defconfig selects CONFIG_HZ=250
but include/asm-ia64/param.h has an ifdef for the simulator to
force HZ to 32.  So we ended up with a kernel/timeconst.h set
for HZ=250 ... which then failed the check for the right HZ
value and died with:

Drop the #ifdef magic from param.h and make force CONFIG_HZ=32
directly for the simulator.
Signed-off-by: Tony Luck <tony.luck@intel.com>

When the sata_mv driver is used as a platform driver,
mv_create_dma_pools() is never called so it fails when trying
to alloc in mv_pool_start().
Signed-off-by: Byron Bradley <byron.bbradley@gmail.com>
Acked-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Forcibly set more of the configuration at init time. This seems to fix at
least one problem reported. We don't know what most of these bits do, but
we do know what windows stuffs there.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

This has confused a few people so fix it
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

commit f351b2d6
        sata_mv: Support SoC controllers

cause panic:

scsi 4:0:0:0: Direct-Access     ATA      HITACHI HDS7225S V44O PQ: 0 ANSI: 5
sd 4:0:0:0: [sde] 488390625 512-byte hardware sectors (250056 MB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sde] 488390625 512-byte hardware sectors (250056 MB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sde:<1>BUG: unable to handle kernel NULL pointer dereference at 000000000000001a
IP: [<ffffffff806262c7>] mv_interrupt+0x21c/0x4cc
PGD 0
Oops: 0000 [1] SMP
CPU 3
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.24-smp-08636-g0afc2edf-dirty #26
RIP: 0010:[<ffffffff806262c7>]  [<ffffffff806262c7>] mv_interrupt+0x21c/0x4cc
RSP: 0000:ffff8102050bbec8  EFLAGS: 00010297
RAX: 0000000000000008 RBX: 0000000000000000 RCX: 0000000000000003
RDX: 0000000000008000 RSI: 0000000000000286 RDI: ffff8102035180e0
RBP: 0000000000000001 R08: 0000000000000003 R09: ffff8102036613e0
R10: 0000000000000002 R11: ffffffff8061474c R12: ffff8102035bf828
R13: 0000000000000008 R14: ffff81020348ece8 R15: ffffc20002cb2000
FS:  0000000000000000(0000) GS:ffff810405025700(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 000000000000001a CR3: 0000000000201000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 0, threadinfo ffff810405094000, task ffff8102050b28c0)
Stack:  000000010000000c 0002040000220400 0000001100000002 ffff81020348eda8
 0000000000000001 ffff8102035f2cc0 0000000000000000 0000000000000000
 0000000000000018 0000000000000000 0000000000000000 ffffffff80269ee8
Call Trace:
 <IRQ>  [<ffffffff80269ee8>] ? handle_IRQ_event+0x25/0x53
 [<ffffffff8026b393>] ? handle_fasteoi_irq+0x90/0xc8
 [<ffffffff802218e2>] ? do_IRQ+0xf1/0x15f
 [<ffffffff8021df24>] ? default_idle+0x0/0x55
 [<ffffffff8021f361>] ? ret_from_intr+0x0/0xa
 <EOI>  [<ffffffff8023010c>] ? lapic_next_event+0x0/0xa
 [<ffffffff8021df55>] ? default_idle+0x31/0x55
 [<ffffffff8021df50>] ? default_idle+0x2c/0x55
 [<ffffffff8021df24>] ? default_idle+0x0/0x55
 [<ffffffff8021e00b>] ? cpu_idle+0x92/0xb8

Code: 41 14 85 c0 89 44 24 14 0f 84 9d 02 00 00 f7 d0 01 d6 41 89 d5 89 41 14 8b 41 14 89 34 24 e9 7e 02 00 00 49 63 c5 49 8b 5c c6 48 <f6> 43 1a 80 4c 8b a3 20 37 00 00 0f 85 62 02 00 00 31 c9 41 83
RIP  [<ffffffff806262c7>] mv_interrupt+0x21c/0x4cc
 RSP <ffff8102050bbec8>
CR2: 000000000000001a
---[ end trace 2583b5f7a5350584 ]---
Kernel panic - not syncing: Aiee, killing interrupt handler!

last_port already include port0 base.
this patch change use last_port directly, and move pp assignment later.
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>