The boardinfo code is not needed by this driver. Only one board
type is supported.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Only one board type is supported by this driver. Instead of
passing the register offsets for the digital in/out ports in
the boardinfo, define the register map and use that to access
the ports.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The model, in_ports, out_ports, and out_boffs information in the
boardinfo is not used by the driver. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The dev_dbg function trace messages in the contec_do_insn_bits
and contec_di_insn_bits functions are just noise. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro relies on a local variable of a specific name. Remove the
macro and use the comedi_board() helper to get the thisboard pointer.

Move the 'dev->board_name = thisboard->name;' in contec_attach().
The contec_find_pci_dev() function modifies the dev->board_ptr.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These are void functions and they dont need return at the end of the function
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

in qt_tiocmset,

the retval gets assigned if we have a valid serial pointer in the critical section
(between mutex_lock and _unlock) of the code, no need to initialise this variable.

the same retval assignment follows in the qt_tiocmget function also, so remove the
initialisation here too.
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

this return is in the end of the qt_throttle function, so this return
not needed
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

this return is at the end of the void function qt_unthrottle, which is
not needed, and also remove the new line below this.
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Moved version string from MODULE_DESCRIPTION to MODULE_VERSION
Signed-off-by: Jonathan Brett <jonbrett.dev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

- Use dev_err whenever a struct device * is present
- None of the printk calls had levels set, but looked like they should
  probably be dev_err
Signed-off-by: Jonathan Brett <jonbrett.dev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace the IS_ISA_BOARD() and IS_PCI_BOARD() functionlike macros with
inline functions is_isa_board() and is_pci_board().  Also call
is_pci_board() in dio200_find_pci_board() instead of an explicit
comparison operator.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some low-level Comedi drivers no longer support manual configuration of
devices with the COMEDI_DEVCONFIG ioctl (used by the comedi_config
program).  For those drivers, the 'attach_pci' or 'attach_usb' handler
will be set in the struct comedi_driver to configure devices
automatically (via comedi_pci_auto_config() or
comedi_usb_auto_config()).  Their 'attach' handlers are redundant but
the the comedi core module currently requires it to be set.

Make the 'attach' handler optional and issue a warning if something
wants to call it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This define is not used in the driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The boardinfo code is not needed by this driver. Only one board
type is supported.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is only one "boardtype" actually supported by this driver.
The second entry in the boardinfo is a dummy entry that would
result in an unusable device.

Remove the boardinfo fields and just use the open coded values
in the subdevice setup.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The *_bits information in the boardinfo is not used by the driver.
Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The analog output channels on this board only support a single
range, 0-10V unipolar. This range is available as an exported
symbol from the comedi core and "range_unipolar10". Use that
instead of duplicating the range in this driver and remove
the information from the boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert this PCI driver to use the comedi PCI auto config attach
mechanism by adding an attach_pci callback function. Since the
driver does not require any external configuration options, disable
the legacy attach by making the attach simply return -ENOSYS. This
removes the need to walk the pci bus to find the pci_dev and the
need for the pci_dev_put() in the detach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These macros rely on local variables having a specific name. Replace
them with local variables where used. Use the comedi_board() helper
to get the thisboard pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added support for zorder changes through DRM plane properties
Signed-off-by: Andre Renaud <andre@bluewatersys.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use tiled buffers for rotated/reflected scanout, with CRTC and plane
properties as the interface for userspace to configure rotation.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver uses the void *private variable in the comedi_subdevice
to pass the offset needed to read/write the appropriate register to
get/set the channels for the subdevice.

The adl_pci7x3x_do_insn_bits() and adl_pci7x3x_di_insn_bits() functions
were retrieving this offset by casting the s->private value as an
unsigned int. On 64-bit builds this results in a warning:

warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]

Fix these warnings by casting the void * to an unsigned long.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Eliminated remaining calls to strict_stroul() and replaced them with
strict_kstrtou8().
Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add helper macro IS_ISA_BOARD(board) to check if the driver supports ISA
boards and this is an ISA board, and IS_PCI_BOARD(board) to check if the
driver supports PCI boards and this is a PCI board.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When detaching the device in dio200_detach() mirror the bus type checks
performed by dio200_attach().  The existing tests are safe but rely on
dev->iobase being 0 when comedi_to_pci_dev(dev) is NULL.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The IS_ENABLED(CONFIG_COMEDI_AMPLC_DIO200_ISA) and
IS_ENABLED(CONFIG_COMEDI_AMPLC_DIO200_PCI) macro calls are a bit
long-winded.  Define a couple of macros DO_ISA and DO_PCI as
abbreviations for them.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a static checker fix and not something I can test.  The intent
of the code here is to set some bit flags.  For a logical OR the ">> 1"
shift wouldn't make a difference.  So it should be using a bitwise OR.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The patch collapses in the internal zsmalloc_int.h into
the zsmalloc-main.c file.

This is done in preparation for the promotion to mm/ where
separate internal headers are discouraged.
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Nitin Gupta <ngupta@vflare.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If we end up returning -EINVAL from the function we will leak the
memory allocated to 'newstr' which has been allocated but not yet
assigned to anything.
Fix the leak by properly freeing the memory again before we return.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct spelling typo in staging/rtl8192u
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct spelling typo and adjust comment line length.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct spelling typo in staging/rtl8192e.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function ft1000_control have input argument timeout which was not passed
to usb_control_msg instead hardcoded to LARGE_TIMEOUT.
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patchset provides page mapping via the page table.
On some archs, most notably ARM, this method has been
demonstrated to be faster than copying.

The logic controlling the method selection (copy vs page table)
is controlled by the definition of USE_PGTABLE_MAPPING which
is/can be defined for any arch that performs better with page
table mapping.
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Because we use per-cpu mapping areas shared among the
pools/users, we can't allow mapping in interrupt context
because it can corrupt another users mappings.
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firstpage already has precedent and meaning the first page
of a zspage.  In the case of the copy mapping functions,
it is the first of a pair of pages needing to be mapped.

This patch just renames the firstpage argument to "page" to
avoid confusion.
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>