1. 14 Feb, 2015 5 commits
    • Josef Bacik's avatar
      Btrfs: don't set and clear delalloc for O_DIRECT writes · 3266789f
      Josef Bacik authored
      We do this to get the space accounting, but this is just needless churn on the
      io_tree, so just drop setting/clearing delalloc and just drop the reserved data
      space when we have a successfull allocation.  Thanks,
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Reviewed-by: default avatarLiu Bo <bo.li.liu@oracle.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      3266789f
    • Josef Bacik's avatar
      Btrfs: only adjust outstanding_extents when we do a short write · 3e05bde8
      Josef Bacik authored
      We have this weird dance where we always inc outstanding_extents when we do a
      O_DIRECT write, even if we allocate the entire range.  To get around this we
      also drop the metadata space if we successfully write.  This is an unnecessary
      dance, we only need to jack up outstanding_extents if we don't satisfy the
      entire range request in get_blocks_direct, otherwise we are good using our
      original reservation.  So drop the unconditional inc and the drop of the
      metadata space that we have for the unconditional inc.  Thanks,
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Reviewed-by: default avatarLiu Bo <bo.li.liu@oracle.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      3e05bde8
    • Zhao Lei's avatar
      btrfs: Fix out-of-space bug · 13212b54
      Zhao Lei authored
      Btrfs will report NO_SPACE when we create and remove files for several times,
      and we can't write to filesystem until mount it again.
      
      Steps to reproduce:
       1: Create a single-dev btrfs fs with default option
       2: Write a file into it to take up most fs space
       3: Delete above file
       4: Wait about 100s to let chunk removed
       5: goto 2
      
      Script is like following:
       #!/bin/bash
      
       # Recommend 1.2G space, too large disk will make test slow
       DEV="/dev/sda16"
       MNT="/mnt/tmp"
      
       dev_size="$(lsblk -bn -o SIZE "$DEV")" || exit 2
       file_size_m=$((dev_size * 75 / 100 / 1024 / 1024))
      
       echo "Loop write ${file_size_m}M file on $((dev_size / 1024 / 1024))M dev"
      
       for ((i = 0; i < 10; i++)); do umount "$MNT" 2>/dev/null; done
       echo "mkfs $DEV"
       mkfs.btrfs -f "$DEV" >/dev/null || exit 2
       echo "mount $DEV $MNT"
       mount "$DEV" "$MNT" || exit 2
      
       for ((loop_i = 0; loop_i < 20; loop_i++)); do
           echo
           echo "loop $loop_i"
      
           echo "dd file..."
           cmd=(dd if=/dev/zero of="$MNT"/file0 bs=1M count="$file_size_m")
           "${cmd[@]}" 2>/dev/null || {
               # NO_SPACE error triggered
               echo "dd failed: ${cmd[*]}"
               exit 1
           }
      
           echo "rm file..."
           rm -f "$MNT"/file0 || exit 2
      
           for ((i = 0; i < 10; i++)); do
               df "$MNT" | tail -1
               sleep 10
           done
       done
      
      Reason:
       It is triggered by commit: 47ab2a6c
       which is used to remove empty block groups automatically, but the
       reason is not in that patch. Code before works well because btrfs
       don't need to create and delete chunks so many times with high
       complexity.
       Above bug is caused by many reason, any of them can trigger it.
      
      Reason1:
       When we remove some continuous chunks but leave other chunks after,
       these disk space should be used by chunk-recreating, but in current
       code, only first create will successed.
       Fixed by Forrest Liu <forrestl@synology.com> in:
       Btrfs: fix find_free_dev_extent() malfunction in case device tree has hole
      
      Reason2:
       contains_pending_extent() return wrong value in calculation.
       Fixed by Forrest Liu <forrestl@synology.com> in:
       Btrfs: fix find_free_dev_extent() malfunction in case device tree has hole
      
      Reason3:
       btrfs_check_data_free_space() try to commit transaction and retry
       allocating chunk when the first allocating failed, but space_info->full
       is set in first allocating, and prevent second allocating in retry.
       Fixed in this patch by clear space_info->full in commit transaction.
      
       Tested for severial times by above script.
      
      Changelog v3->v4:
       use light weight int instead of atomic_t to record have_remove_bgs in
       transaction, suggested by:
       Josef Bacik <jbacik@fb.com>
      
      Changelog v2->v3:
       v2 fixed the bug by adding more commit-transaction, but we
       only need to reclaim space when we are really have no space for
       new chunk, noticed by:
       Filipe David Manana <fdmanana@gmail.com>
      
       Actually, our code already have this type of commit-and-retry,
       we only need to make it working with removed-bgs.
       v3 fixed the bug with above way.
      
      Changelog v1->v2:
       v1 will introduce a new bug when delete and create chunk in same disk
       space in same transaction, noticed by:
       Filipe David Manana <fdmanana@gmail.com>
       V2 fix this bug by commit transaction after remove block grops.
      Reported-by: default avatarTsutomu Itoh <t-itoh@jp.fujitsu.com>
      Suggested-by: default avatarFilipe David Manana <fdmanana@gmail.com>
      Suggested-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarZhao Lei <zhaolei@cn.fujitsu.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      13212b54
    • Filipe Manana's avatar
      Btrfs: scrub, fix sleep in atomic context · f55985f4
      Filipe Manana authored
      My previous patch "Btrfs: fix scrub race leading to use-after-free"
      introduced the possibility to sleep in an atomic context, which happens
      when the scrub_lock mutex is held at the time scrub_pending_bio_dec()
      is called - this function can be called under an atomic context.
      Chris ran into this in a debug kernel which gave the following trace:
      
      [ 1928.950319] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:621
      [ 1928.967334] in_atomic(): 1, irqs_disabled(): 0, pid: 149670, name: fsstress
      [ 1928.981324] INFO: lockdep is turned off.
      [ 1928.989244] CPU: 24 PID: 149670 Comm: fsstress Tainted: G        W     3.19.0-rc7-mason+ #41
      [ 1929.006418] Hardware name: ZTSYSTEMS Echo Ridge T4  /A9DRPF-10D, BIOS 1.07 05/10/2012
      [ 1929.022207]  ffffffff81a22cf8 ffff881076e03b78 ffffffff816b8dd9 ffff881076e03b78
      [ 1929.037267]  ffff880d8e828710 ffff881076e03ba8 ffffffff810856c4 ffff881076e03bc8
      [ 1929.052315]  0000000000000000 000000000000026d ffffffff81a22cf8 ffff881076e03bd8
      [ 1929.067381] Call Trace:
      [ 1929.072344]  <IRQ>  [<ffffffff816b8dd9>] dump_stack+0x4f/0x6e
      [ 1929.083968]  [<ffffffff810856c4>] ___might_sleep+0x174/0x230
      [ 1929.095352]  [<ffffffff810857d2>] __might_sleep+0x52/0x90
      [ 1929.106223]  [<ffffffff816bb68f>] mutex_lock_nested+0x2f/0x3b0
      [ 1929.117951]  [<ffffffff810ab37d>] ? trace_hardirqs_on+0xd/0x10
      [ 1929.129708]  [<ffffffffa05dc838>] scrub_pending_bio_dec+0x38/0x70 [btrfs]
      [ 1929.143370]  [<ffffffffa05dd0e0>] scrub_parity_bio_endio+0x50/0x70 [btrfs]
      [ 1929.157191]  [<ffffffff812fa603>] bio_endio+0x53/0xa0
      [ 1929.167382]  [<ffffffffa05f96bc>] rbio_orig_end_io+0x7c/0xa0 [btrfs]
      [ 1929.180161]  [<ffffffffa05f97ba>] raid_write_parity_end_io+0x5a/0x80 [btrfs]
      [ 1929.194318]  [<ffffffff812fa603>] bio_endio+0x53/0xa0
      [ 1929.204496]  [<ffffffff8130401b>] blk_update_request+0x1eb/0x450
      [ 1929.216569]  [<ffffffff81096e58>] ? trigger_load_balance+0x78/0x500
      [ 1929.229176]  [<ffffffff8144c74d>] scsi_end_request+0x3d/0x1f0
      [ 1929.240740]  [<ffffffff8144ccac>] scsi_io_completion+0xac/0x5b0
      [ 1929.252654]  [<ffffffff81441c50>] scsi_finish_command+0xf0/0x150
      [ 1929.264725]  [<ffffffff8144d317>] scsi_softirq_done+0x147/0x170
      [ 1929.276635]  [<ffffffff8130ace6>] blk_done_softirq+0x86/0xa0
      [ 1929.288014]  [<ffffffff8105d92e>] __do_softirq+0xde/0x600
      [ 1929.298885]  [<ffffffff8105df6d>] irq_exit+0xbd/0xd0
      (...)
      
      Fix this by using a reference count on the scrub context structure
      instead of locking the scrub_lock mutex.
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      f55985f4
    • Filipe Manana's avatar
      Btrfs: fix scheduler warning when syncing log · 575849ec
      Filipe Manana authored
      We try to lock a mutex while the current task state is not TASK_RUNNING,
      which results in the following warning when CONFIG_DEBUG_LOCK_ALLOC=y:
      
      [30736.772501] ------------[ cut here ]------------
      [30736.774545] WARNING: CPU: 9 PID: 19972 at kernel/sched/core.c:7300 __might_sleep+0x8b/0xa8()
      [30736.783453] do not call blocking ops when !TASK_RUNNING; state=2 set at [<ffffffff8107499b>] prepare_to_wait+0x43/0x89
      [30736.786261] Modules linked in: dm_flakey dm_mod crc32c_generic btrfs xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop parport_pc psmouse parport pcspkr microcode serio_raw evdev processor thermal_sys i2c_piix4 i2c_core button ext4 crc16 jbd2 mbcache sg sr_mod cdrom sd_mod ata_generic virtio_scsi floppy ata_piix libata virtio_pci virtio_ring e1000 virtio scsi_mod
      [30736.794323] CPU: 9 PID: 19972 Comm: fsstress Not tainted 3.19.0-rc7-btrfs-next-5+ #1
      [30736.795821] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
      [30736.798788]  0000000000000009 ffff88042743fbd8 ffffffff814248ed ffff88043d32f2d8
      [30736.800504]  ffff88042743fc28 ffff88042743fc18 ffffffff81045338 0000000000000001
      [30736.802131]  ffffffff81064514 ffffffff817c52d1 000000000000026d 0000000000000000
      [30736.803676] Call Trace:
      [30736.804256]  [<ffffffff814248ed>] dump_stack+0x4c/0x65
      [30736.805245]  [<ffffffff81045338>] warn_slowpath_common+0xa1/0xbb
      [30736.806360]  [<ffffffff81064514>] ? __might_sleep+0x8b/0xa8
      [30736.807391]  [<ffffffff81045398>] warn_slowpath_fmt+0x46/0x48
      [30736.808511]  [<ffffffff8107499b>] ? prepare_to_wait+0x43/0x89
      [30736.809620]  [<ffffffff8107499b>] ? prepare_to_wait+0x43/0x89
      [30736.810691]  [<ffffffff81064514>] __might_sleep+0x8b/0xa8
      [30736.811703]  [<ffffffff81426eaf>] mutex_lock_nested+0x2f/0x3a0
      [30736.812889]  [<ffffffff8107bfa1>] ? trace_hardirqs_on_caller+0x18f/0x1ab
      [30736.814138]  [<ffffffff8107bfca>] ? trace_hardirqs_on+0xd/0xf
      [30736.819878]  [<ffffffffa038cfff>] wait_for_writer.isra.12+0x91/0xaa [btrfs]
      [30736.821260]  [<ffffffff810748bd>] ? signal_pending_state+0x31/0x31
      [30736.822410]  [<ffffffffa0391f0a>] btrfs_sync_log+0x160/0x947 [btrfs]
      [30736.823574]  [<ffffffff8107bfa1>] ? trace_hardirqs_on_caller+0x18f/0x1ab
      [30736.824847]  [<ffffffff8107bfca>] ? trace_hardirqs_on+0xd/0xf
      [30736.825972]  [<ffffffffa036e555>] btrfs_sync_file+0x2b0/0x319 [btrfs]
      [30736.827684]  [<ffffffff8117901a>] vfs_fsync_range+0x21/0x23
      [30736.828932]  [<ffffffff81179038>] vfs_fsync+0x1c/0x1e
      [30736.829917]  [<ffffffff8117928b>] do_fsync+0x34/0x4e
      [30736.830862]  [<ffffffff811794b3>] SyS_fsync+0x10/0x14
      [30736.831819]  [<ffffffff8142a512>] system_call_fastpath+0x12/0x17
      [30736.832982] ---[ end trace c0b57df60d32ae5c ]---
      
      Fix this my acquiring the mutex after calling finish_wait(), which sets the
      task's state to TASK_RUNNING.
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      Reviewed-by: default avatarLiu Bo <bo.li.liu@oracle.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      575849ec
  2. 03 Feb, 2015 13 commits
    • Satoru Takeuchi's avatar
      Btrfs: Remove unnecessary placeholder in btrfs_err_code · eb710b15
      Satoru Takeuchi authored
      "notused" is not necessary. Set 1 to the first entry is enough.
      
      Signed-off-by: Takeuchi Satoru <takeuchi_satoru@jp.fujitsu.com
      Cc: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
      Reviewed-by: default avatarDavid Sterba <dsterba@suse.cz>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      eb710b15
    • Gui Hecheng's avatar
      btrfs: cleanup init for list in free-space-cache · b76808fc
      Gui Hecheng authored
      o removed an unecessary INIT_LIST_HEAD after LIST_HEAD
      
      o merge a declare & INIT_LIST_HEAD pair into one LIST_HEAD
      Signed-off-by: default avatarGui Hecheng <guihc.fnst@cn.fujitsu.com>
      Reviewed-by: default avatarDavid Sterba <dsterba@suse.cz>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      b76808fc
    • Shaohua Li's avatar
      btrfs: delete chunk allocation attemp when setting block group ro · 2f081088
      Shaohua Li authored
      Below test will fail currently:
            mkfs.ext4 -F /dev/sda
            btrfs-convert /dev/sda
            mount /dev/sda /mnt
            btrfs device add -f /dev/sdb /mnt
            btrfs balance start -v -dconvert=raid1 -mconvert=raid1 /mnt
      
      The reason is there are some block groups with usage 0, but the whole
      disk hasn't free space to allocate new chunk, so we even can't set such
      block group readonly. This patch deletes the chunk allocation when
      setting block group ro. For META, we already have reserve. But for
      SYSTEM, we don't have, so the check_system_chunk is still required.
      Signed-off-by: default avatarShaohua Li <shli@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      2f081088
    • Naohiro Aota's avatar
      btrfs: clear bio reference after submit_one_bio() · 289454ad
      Naohiro Aota authored
      After submit_one_bio(), `bio' can go away. However submit_extent_page()
      leave `bio' referable if submit_one_bio() failed (e.g. -ENOMEM on OOM).
      It will cause invalid paging request when submit_extent_page() is called
      next time.
      
      I reproduced ENOMEM case with the following script (need
      CONFIG_FAIL_PAGE_ALLOC, and CONFIG_FAULT_INJECTION_DEBUG_FS).
      
        #!/bin/bash
      
        dmesgout=dmesg.txt
        start=100000
        end=300000
        step=1000
      
        # btrfs options
        device=/dev/vdb1
        directory=/mnt/btrfs
      
        # fault-injection options
        percent=100
        times=3
      
        mkdir -p $directory || exit 1
        mount -o compress $device $directory || exit 1
      
        rm -f $directory/file || exit 1
        dd if=/dev/zero of=$directory/file bs=1M count=512 || exit 1
      
        for interval in `seq $start $step $end`; do
                dmesg -C
                echo 1 > /proc/sys/vm/drop_caches
                sync
                export FAILCMD_TYPE=fail_page_alloc
                ./failcmd.sh -p $percent -t $times -i $interval \
                        --ignore-gfp-highmem=N --ignore-gfp-wait=N --min-order=0 \
                        -- \
                        cat $directory/file > /dev/null
                dmesg > ${dmesgout}
                if grep -q BUG: ${dmesgout}; then
                        cat ${dmesgout}
                        exit 1
                fi
        done
      
        umount $directory
        exit 0
      Signed-off-by: default avatarNaohiro Aota <naota@elisp.net>
      Tested-by: default avatarSatoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      289454ad
    • Filipe Manana's avatar
      Btrfs: fix scrub race leading to use-after-free · de554a4f
      Filipe Manana authored
      While running a scrub on a kernel with CONFIG_DEBUG_PAGEALLOC=y, I got
      the following trace:
      
      [68127.807663] BUG: unable to handle kernel paging request at ffff8803f8947a50
      [68127.807663] IP: [<ffffffff8107da31>] do_raw_spin_lock+0x94/0x122
      [68127.807663] PGD 3003067 PUD 43e1f5067 PMD 43e030067 PTE 80000003f8947060
      [68127.807663] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
      [68127.807663] Modules linked in: dm_flakey dm_mod crc32c_generic btrfs xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop parport_pc processor parpo
      [68127.807663] CPU: 2 PID: 3081 Comm: kworker/u8:5 Not tainted 3.18.0-rc6-btrfs-next-3+ #4
      [68127.807663] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
      [68127.807663] Workqueue: btrfs-btrfs-scrub btrfs_scrub_helper [btrfs]
      [68127.807663] task: ffff880101fc5250 ti: ffff8803f097c000 task.ti: ffff8803f097c000
      [68127.807663] RIP: 0010:[<ffffffff8107da31>]  [<ffffffff8107da31>] do_raw_spin_lock+0x94/0x122
      [68127.807663] RSP: 0018:ffff8803f097fbb8  EFLAGS: 00010093
      [68127.807663] RAX: 0000000028dd386c RBX: ffff8803f8947a50 RCX: 0000000028dd3854
      [68127.807663] RDX: 0000000000000018 RSI: 0000000000000002 RDI: 0000000000000001
      [68127.807663] RBP: ffff8803f097fbd8 R08: 0000000000000004 R09: 0000000000000001
      [68127.807663] R10: ffff880102620980 R11: ffff8801f3e8c900 R12: 000000000001d390
      [68127.807663] R13: 00000000cabd13c8 R14: ffff8803f8947800 R15: ffff88037c574f00
      [68127.807663] FS:  0000000000000000(0000) GS:ffff88043dd00000(0000) knlGS:0000000000000000
      [68127.807663] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
      [68127.807663] CR2: ffff8803f8947a50 CR3: 00000000b6481000 CR4: 00000000000006e0
      [68127.807663] Stack:
      [68127.807663]  ffffffff823942a8 ffff8803f8947a50 ffff8802a3416f80 0000000000000000
      [68127.807663]  ffff8803f097fc18 ffffffff8141e7c0 ffffffff81072948 000000000034f314
      [68127.807663]  ffff8803f097fc08 0000000000000292 ffff8803f097fc48 ffff8803f8947a50
      [68127.807663] Call Trace:
      [68127.807663]  [<ffffffff8141e7c0>] _raw_spin_lock_irqsave+0x4b/0x55
      [68127.807663]  [<ffffffff81072948>] ? __wake_up+0x22/0x4b
      [68127.807663]  [<ffffffff81072948>] __wake_up+0x22/0x4b
      [68127.807663]  [<ffffffffa0392327>] scrub_pending_bio_dec+0x32/0x36 [btrfs]
      [68127.807663]  [<ffffffffa0395e70>] scrub_bio_end_io_worker+0x5a3/0x5c9 [btrfs]
      [68127.807663]  [<ffffffff810e0c7c>] ? time_hardirqs_off+0x15/0x28
      [68127.807663]  [<ffffffff81078106>] ? trace_hardirqs_off_caller+0x4c/0xb9
      [68127.807663]  [<ffffffffa0372a7c>] normal_work_helper+0xf1/0x238 [btrfs]
      [68127.807663]  [<ffffffffa0372d3d>] btrfs_scrub_helper+0x12/0x14 [btrfs]
      [68127.807663]  [<ffffffff810582d2>] process_one_work+0x1e4/0x3b6
      [68127.807663]  [<ffffffff81078180>] ? trace_hardirqs_off+0xd/0xf
      [68127.807663]  [<ffffffff81058dc9>] worker_thread+0x1fb/0x2a8
      [68127.807663]  [<ffffffff81058bce>] ? rescuer_thread+0x219/0x219
      [68127.807663]  [<ffffffff8105cd75>] kthread+0xdb/0xe3
      [68127.807663]  [<ffffffff8105cc9a>] ? __kthread_parkme+0x67/0x67
      [68127.807663]  [<ffffffff8141f1ec>] ret_from_fork+0x7c/0xb0
      [68127.807663]  [<ffffffff8105cc9a>] ? __kthread_parkme+0x67/0x67
      [68127.807663] Code: 39 c2 75 14 8d 8a 00 00 01 00 89 d0 f0 0f b1 0b 39 d0 0f 84 81 00 00 00 4c 69 2d 27 86 99 00 fa 00 00 00 45 31 e4 4d 39 ec 74 2b <8b> 13 89 d0 c1 e8 10 66 39 c2 75
      [68127.807663] RIP  [<ffffffff8107da31>] do_raw_spin_lock+0x94/0x122
      [68127.807663]  RSP <ffff8803f097fbb8>
      [68127.807663] CR2: ffff8803f8947a50
      [68127.807663] ---[ end trace d7045aac00a66cd8 ]---
      
      This is due to a race that can happen in a very tiny time window and is
      illustrated by the following sequence diagram:
      
               CPU 1                                                     CPU 2
      
                                                                      btrfs_scrub_dev()
      scrub_bio_end_io_worker()
         scrub_pending_bio_dec()
             atomic_dec(&sctx->bios_in_flight)
                                                                         wait sctx->bios_in_flight == 0
                                                                         wait sctx->workers_pending == 0
                                                                         mutex_lock(&fs_info->scrub_lock)
                                                                         (...)
                                                                         mutex_lock(&fs_info->scrub_lock)
                                                                         scrub_free_ctx(sctx)
                                                                            kfree(sctx)
             wake_up(&sctx->list_wait)
                __wake_up()
                    spin_lock_irqsave(&sctx->list_wait->lock, flags)
      
      Another variation of this scenario that results in the same use-after-free
      issue is:
      
               CPU 1                                                     CPU 2
      
                                                                      btrfs_scrub_dev()
                                                                         wait sctx->bios_in_flight == 0
      scrub_bio_end_io_worker()
         scrub_pending_bio_dec()
             __wake_up(&sctx->list_wait)
                spin_lock_irqsave(&sctx->list_wait->lock, flags)
                default_wake_function()
                    wake up task at CPU 2
                                                                         wait sctx->workers_pending == 0
                                                                         mutex_lock(&fs_info->scrub_lock)
                                                                         (...)
                                                                         mutex_lock(&fs_info->scrub_lock)
                                                                         scrub_free_ctx(sctx)
                                                                            kfree(sctx)
                spin_unlock_irqrestore(&sctx->list_wait->lock, flags)
      
      Fix this by holding the scrub lock while doing the wakeup.
      
      This isn't a recent regression, the issue as been around since the scrub
      feature was added (2011, commit a2de733c).
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      de554a4f
    • Filipe Manana's avatar
      Btrfs: add missing cleanup on sysfs init failure · 001a648d
      Filipe Manana authored
      If we failed during initialization of sysfs, we weren't unregistering the
      top level btrfs sysfs entry nor the debugfs stuff.
      Not unregistering the top level sysfs entry makes future attempts to reload
      the btrfs module impossible and the following is reported in dmesg:
      
      [ 2246.451296] WARNING: CPU: 3 PID: 10999 at fs/sysfs/dir.c:486 sysfs_warn_dup+0x91/0xb0()
      [ 2246.451298] sysfs: cannot create duplicate filename '/fs/btrfs'
      [ 2246.451298] Modules linked in: btrfs(+) raid6_pq xor bnep rfcomm bluetooth binfmt_misc nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc parport_pc parport psmouse serio_raw pcspkr evbug i2c_piix4 e1000 floppy [last unloaded: btrfs]
      [ 2246.451310] CPU: 3 PID: 10999 Comm: modprobe Tainted: G        W    3.13.0-fdm-btrfs-next-24+ #7
      [ 2246.451311] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
      [ 2246.451312]  0000000000000009 ffff8800d353fa08 ffffffff816f1da6 0000000000000410
      [ 2246.451314]  ffff8800d353fa58 ffff8800d353fa48 ffffffff8104a32c ffff88020821a290
      [ 2246.451316]  ffff88020821a290 ffff88020821a290 ffff8802148f0000 ffff8800d353fb80
      [ 2246.451318] Call Trace:
      [ 2246.451322]  [<ffffffff816f1da6>] dump_stack+0x4e/0x68
      [ 2246.451324]  [<ffffffff8104a32c>] warn_slowpath_common+0x8c/0xc0
      [ 2246.451325]  [<ffffffff8104a416>] warn_slowpath_fmt+0x46/0x50
      [ 2246.451328]  [<ffffffff81367dc5>] ? strlcat+0x65/0x90
      (....)
      
      This fixes the following change:
      
          btrfs: add simple debugfs interface
          commit 1bae3098Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      001a648d
    • Filipe Manana's avatar
      Btrfs: fix race between transaction commit and empty block group removal · d4b450cd
      Filipe Manana authored
      Committing a transaction can race with automatic removal of empty block
      groups (cleaner kthread), leading to a BUG_ON() in the transaction
      commit code while running btrfs_finish_extent_commit(). The following
      sequence diagram shows how it can happen:
      
                 CPU 1                                       CPU 2
      
      btrfs_commit_transaction()
        fs_info->running_transaction = NULL
        btrfs_finish_extent_commit()
          find_first_extent_bit()
            -> found range for block group X
               in fs_info->freed_extents[]
      
                                                     btrfs_delete_unused_bgs()
                                                       -> found block group X
      
                                                       Removed block group X's range
                                                       from fs_info->freed_extents[]
      
                                                       btrfs_remove_chunk()
                                                          btrfs_remove_block_group(bg X)
      
          unpin_extent_range(bg X range)
             btrfs_lookup_block_group(bg X)
                -> returns NULL
                  -> BUG_ON()
      
      The trace that results from the BUG_ON() is:
      
      [48665.187808] ------------[ cut here ]------------
      [48665.188032] kernel BUG at fs/btrfs/extent-tree.c:5675!
      [48665.188032] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC
      [48665.188032] Modules linked in: dm_flakey dm_mod crc32c_generic btrfs xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop parport_pc evdev microcode
      [48665.197388] CPU: 2 PID: 31211 Comm: kworker/u32:16 Tainted: G        W      3.19.0-rc5-btrfs-next-4+ #1
      [48665.197388] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
      [48665.197388] Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs]
      [48665.197388] task: ffff880222011810 ti: ffff8801b56a4000 task.ti: ffff8801b56a4000
      [48665.197388] RIP: 0010:[<ffffffffa0350d05>]  [<ffffffffa0350d05>] unpin_extent_range+0x6a/0x1ba [btrfs]
      [48665.197388] RSP: 0018:ffff8801b56a7b88  EFLAGS: 00010246
      [48665.197388] RAX: 0000000000000000 RBX: ffff8802143a6000 RCX: ffff8802220120c8
      [48665.197388] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff8800a3c140b0
      [48665.197388] RBP: ffff8801b56a7bd8 R08: 0000000000000003 R09: 0000000000000000
      [48665.197388] R10: 0000000000000000 R11: 000000000000bbac R12: 0000000012e8e000
      [48665.197388] R13: ffff8800a3c14000 R14: 0000000000000000 R15: 0000000000000000
      [48665.197388] FS:  0000000000000000(0000) GS:ffff88023ec40000(0000) knlGS:0000000000000000
      [48665.197388] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
      [48665.197388] CR2: 00007f065e42f270 CR3: 0000000206f70000 CR4: 00000000000006e0
      [48665.197388] Stack:
      [48665.197388]  ffff8801b56a7bd8 0000000012ea0000 01ff8800a3c14138 0000000012e9ffff
      [48665.197388]  ffff880141df3dd8 ffff8802143a6000 ffff8800a3c14138 ffff880141df3df0
      [48665.197388]  ffff880141df3dd8 0000000000000000 ffff8801b56a7c08 ffffffffa0354227
      [48665.197388] Call Trace:
      [48665.197388]  [<ffffffffa0354227>] btrfs_finish_extent_commit+0xb0/0xd9 [btrfs]
      [48665.197388]  [<ffffffffa0366b4b>] btrfs_commit_transaction+0x791/0x92c [btrfs]
      [48665.197388]  [<ffffffffa0352432>] flush_space+0x43d/0x452 [btrfs]
      [48665.197388]  [<ffffffff814295c3>] ? _raw_spin_unlock+0x28/0x33
      [48665.197388]  [<ffffffffa035255f>] btrfs_async_reclaim_metadata_space+0x118/0x164 [btrfs]
      [48665.197388]  [<ffffffff81059917>] ? process_one_work+0x14b/0x3ab
      [48665.197388]  [<ffffffff810599ac>] process_one_work+0x1e0/0x3ab
      [48665.197388]  [<ffffffff81079fa9>] ? trace_hardirqs_off+0xd/0xf
      [48665.197388]  [<ffffffff8105a55b>] worker_thread+0x210/0x2d0
      [48665.197388]  [<ffffffff8105a34b>] ? rescuer_thread+0x2c3/0x2c3
      [48665.197388]  [<ffffffff8105e5c0>] kthread+0xef/0xf7
      [48665.197388]  [<ffffffff81429682>] ? _raw_spin_unlock_irq+0x2d/0x39
      [48665.197388]  [<ffffffff8105e4d1>] ? __kthread_parkme+0xad/0xad
      [48665.197388]  [<ffffffff81429dec>] ret_from_fork+0x7c/0xb0
      [48665.197388]  [<ffffffff8105e4d1>] ? __kthread_parkme+0xad/0xad
      [48665.197388] Code: 85 f6 74 14 49 8b 06 49 03 46 09 49 39 c4 72 1d 4c 89 f7 e8 83 ec ff ff 4c 89 e6 4c 89 ef e8 1e f1 ff ff 48 85 c0 49 89 c6 75 02 <0f> 0b 49 8b 1e 49 03 5e 09 48 8b
      [48665.197388] RIP  [<ffffffffa0350d05>] unpin_extent_range+0x6a/0x1ba [btrfs]
      [48665.197388]  RSP <ffff8801b56a7b88>
      [48665.272246] ---[ end trace b9c6ab9957521376 ]---
      
      Fix this by ensuring that unpining the block group's range in
      btrfs_finish_extent_commit() is done in a synchronized fashion
      with removing the block group's range from freed_extents[]
      in btrfs_delete_unused_bgs()
      
      This race got introduced with the change:
      
          Btrfs: remove empty block groups automatically
          commit 47ab2a6cSigned-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      d4b450cd
    • David Sterba's avatar
      btrfs: add more checks to btrfs_read_sys_array · e3540eab
      David Sterba authored
      Verify that the sys_array has enough bytes to read the next item.
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.cz>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      e3540eab
    • David Sterba's avatar
      btrfs: cleanup, rename a few variables in btrfs_read_sys_array · 1ffb22cf
      David Sterba authored
      There's a pointer to buffer, integer offset and offset passed as
      pointer, try to find matching names for them.
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.cz>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      1ffb22cf
    • David Sterba's avatar
      btrfs: add checks for sys_chunk_array sizes · ce7fca5f
      David Sterba authored
      Verify that possible minimum and maximum size is set, validity of
      contents is checked in btrfs_read_sys_array.
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.cz>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      ce7fca5f
    • David Sterba's avatar
      btrfs: more superblock checks, lower bounds on devices and sectorsize/nodesize · 75d6ad38
      David Sterba authored
      I received a few crafted images from Jiri, all got through the recently
      added superblock checks. The lower bounds checks for num_devices and
      sector/node -sizes were missing and caused a crash during mount.
      
      Tools for symbolic code execution were used to prepare the images
      contents.
      Reported-by: default avatarJiri Slaby <jslaby@suse.cz>
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.cz>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      75d6ad38
    • chandan r's avatar
      Btrfs: Add code to support file creation time · 9cc97d64
      chandan r authored
      This patch adds a new member to the 'struct btrfs_inode' structure to hold
      the file creation time.
      Signed-off-by: default avatarchandan <chandanrmail@gmail.com>
      [refreshed, removed btrfs_inode_otime]
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.cz>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      9cc97d64
    • David Sterba's avatar
      btrfs: kill btrfs_inode_*time helpers · a937b979
      David Sterba authored
      They just opencode taking address of the timespec member.
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.cz>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      a937b979
  3. 22 Jan, 2015 22 commits
    • chandan's avatar
      Btrfs: insert_new_root: Fix lock type of the extent buffer. · 95449a16
      chandan authored
      btrfs_alloc_tree_block() returns an extent buffer on which a blocked lock has
      been taken. Hence assign the appropriate value to path->locks[level].
      Signed-off-by: default avatarChandan Rajendra <chandan@linux.vnet.ibm.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      95449a16
    • Anand Jain's avatar
      Btrfs: fix unused members in struct btrfs_root · 78f55e5e
      Anand Jain authored
      There isn't any real use of following members of struct btrfs_root
      so delete them.
      
      struct kobject root_kobj;
      struct completion kobj_unregister;
      Signed-off-by: default avatarAnand Jain <anand.jain@oracle.com>
      Reviewed-by: default avatarDavid Sterba <dsterba@suse.cz>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      78f55e5e
    • Yang Dongsheng's avatar
      btrfs: qgroup: move WARN_ON() to the correct location. · 0ee13fe2
      Yang Dongsheng authored
      In function qgroup_excl_accounting(), we need to WARN when
      qg->excl is less than what we want to free, same to child
      and parents. But currently, for parent qgroup, the WARN_ON()
      is located after freeing qg->excl. It will WARN out even we
      free it normally.
      
      This patch move this WARN_ON() before freeing qg->excl.
      Signed-off-by: default avatarDongsheng Yang <yangds.fnst@cn.fujitsu.com>
      Reviewed-by: default avatarSatoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      0ee13fe2
    • Liu Bo's avatar
      Btrfs: cleanup unused run_most · 26455d33
      Liu Bo authored
      "run_most" is not used anymore.
      Signed-off-by: default avatarLiu Bo <bo.li.liu@oracle.com>
      Reviewed-by: default avatarSatoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      26455d33
    • Zhao Lei's avatar
      Rename all ref_count to refs in struct · 57019345
      Zhao Lei authored
      refs is better than ref_count to record a struct's ref count.
      Signed-off-by: default avatarZhao Lei <zhaolei@cn.fujitsu.com>
      Suggested-by: default avatarDavid Sterba <dsterba@suse.cz>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      57019345
    • Zhao Lei's avatar
      Btrfs: Introduce BTRFS_BLOCK_GROUP_RAID56_MASK to check raid56 simply · ffe2d203
      Zhao Lei authored
      So we can check raid56 with:
       (map->type & BTRFS_BLOCK_GROUP_RAID56_MASK)
      instead of long:
       (map->type & (BTRFS_BLOCK_GROUP_RAID5 | BTRFS_BLOCK_GROUP_RAID6))
      Signed-off-by: default avatarZhao Lei <zhaolei@cn.fujitsu.com>
      Signed-off-by: default avatarMiao Xie <miaox@cn.fujitsu.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      ffe2d203
    • Zhao Lei's avatar
      Btrfs: Include map_type in raid_bio · 10f11900
      Zhao Lei authored
      Corrent code use many kinds of "clever" way to determine operation
      target's raid type, as:
        raid_map != NULL
        or
        raid_map[MAX_NR] == RAID[56]_Q_STRIPE
      
      To make code easy to maintenance, this patch put raid type into
      bbio, and we can always get raid type from bbio with a "stupid"
      way.
      Signed-off-by: default avatarZhao Lei <zhaolei@cn.fujitsu.com>
      Signed-off-by: default avatarMiao Xie <miaox@cn.fujitsu.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      10f11900
    • Zhao Lei's avatar
      Btrfs: Simplify scrub_setup_recheck_block()'s argument · be50a8dd
      Zhao Lei authored
      scrub_setup_recheck_block() have many arguments but most of them
      can be get from one of them, we can remove them to make code clean.
      Some other cleanup for that function also included in this patch.
      Signed-off-by: default avatarZhao Lei <zhaolei@cn.fujitsu.com>
      Signed-off-by: default avatarMiao Xie <miaox@cn.fujitsu.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      be50a8dd
    • Zhao Lei's avatar
      Btrfs: Combine per-page recover in dev-replace and scrub · b968fed1
      Zhao Lei authored
      The code are similar, combine them to make code clean and easy to maintenance.
      Some lost condition are also completed with benefit of this combination.
      Signed-off-by: default avatarZhao Lei <zhaolei@cn.fujitsu.com>
      Signed-off-by: default avatarMiao Xie <miaox@cn.fujitsu.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      b968fed1
    • Zhao Lei's avatar
      Btrfs: Separate finding-right-mirror and writing-to-target's process in... · 8d6738c1
      Zhao Lei authored
      Btrfs: Separate finding-right-mirror and writing-to-target's process in scrub_handle_errored_block()
      
      In corrent code, code of finding-right-mirror and writing-to-target
      are mixed in logic, if we find a right mirror but failed in writing
      to target, it will treat as "hadn't found right block", and fill the
      target with sblock_bad.
      
      Actually, "failed in writing to target" does not mean "source
      block is wrong", this patch separate above two condition in logic,
      and do some cleanup to make code clean.
      Signed-off-by: default avatarZhao Lei <zhaolei@cn.fujitsu.com>
      Signed-off-by: default avatarMiao Xie <miaox@cn.fujitsu.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      8d6738c1
    • Zhao Lei's avatar
      Btrfs: Break loop when reach BTRFS_MAX_MIRRORS in scrub_setup_recheck_block() · dc5f7a3b
      Zhao Lei authored
      Use break instead of useless loop should be more suitable in this
      case.
      Signed-off-by: default avatarZhao Lei <zhaolei@cn.fujitsu.com>
      Signed-off-by: default avatarMiao Xie <miaox@cn.fujitsu.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      dc5f7a3b
    • Zhao Lei's avatar
      7653947f
    • Zhao Lei's avatar
      Btrfs: Cleanup btrfs_bio_counter_inc_blocked() · 09dd7a01
      Zhao Lei authored
      1: Remove no-need DEFINE_WAIT(wait)
      2: Add likely() for BTRFS_FS_STATE_DEV_REPLACING condition
      3: Use while loop instead of goto
      Signed-off-by: default avatarZhao Lei <zhaolei@cn.fujitsu.com>
      Signed-off-by: default avatarMiao Xie <miaox@cn.fujitsu.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      09dd7a01
    • Zhao Lei's avatar
      Btrfs: Remove noneed force_write in scrub_write_block_to_dev_replace · 114ab50d
      Zhao Lei authored
      It is always 1 in this place, because !1 case was already jumped
      out in previous code.
      Signed-off-by: default avatarZhao Lei <zhaolei@cn.fujitsu.com>
      Signed-off-by: default avatarMiao Xie <miaox@cn.fujitsu.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      114ab50d
    • Zhao Lei's avatar
      Btrfs: Fix a jump typo of nodatasum_case to avoid wrong WARN_ON() · b25c94c5
      Zhao Lei authored
      if (sctx->is_dev_replace && !is_metadata && !have_csum) {
          ...
          goto nodatasum_case;
      }
      ...
      nodatasum_case:
          WARN_ON(sctx->is_dev_replace);
      
      In above code, nodatasum_case marker should be moved after
      WARN_ON().
      Signed-off-by: default avatarZhao Lei <zhaolei@cn.fujitsu.com>
      Signed-off-by: default avatarMiao Xie <miaox@cn.fujitsu.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      b25c94c5
    • Zhao Lei's avatar
      Btrfs: add ref_count and free function for btrfs_bio · 6e9606d2
      Zhao Lei authored
      1: ref_count is simple than current RBIO_HOLD_BBIO_MAP_BIT flag
         to keep btrfs_bio's memory in raid56 recovery implement.
      2: free function for bbio will make code clean and flexible, plus
         forced data type checking in compile.
      
      Changelog v1->v2:
       Rename following by David Sterba's suggestion:
       put_btrfs_bio() -> btrfs_put_bio()
       get_btrfs_bio() -> btrfs_get_bio()
       bbio->ref_count -> bbio->refs
      Signed-off-by: default avatarZhao Lei <zhaolei@cn.fujitsu.com>
      Signed-off-by: default avatarMiao Xie <miaox@cn.fujitsu.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      6e9606d2
    • Zhao Lei's avatar
      Btrfs: Make raid_map array be inlined in btrfs_bio structure · 8e5cfb55
      Zhao Lei authored
      It can make code more simple and clear, we need not care about
      free bbio and raid_map together.
      Signed-off-by: default avatarMiao Xie <miaox@cn.fujitsu.com>
      Signed-off-by: default avatarZhao Lei <zhaolei@cn.fujitsu.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      8e5cfb55
    • Zhao Lei's avatar
      Btrfs: sort raid_map before adding tgtdev stripes · cc7539ed
      Zhao Lei authored
      It can avoid complex calculation of real stripes in sort,
      moreover, we can clean up code of sorting tgtdev_map because it
      will be in order initially.
      Signed-off-by: default avatarZhao Lei <zhaolei@cn.fujitsu.com>
      Signed-off-by: default avatarMiao Xie <miaox@cn.fujitsu.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      cc7539ed
    • Zhao Lei's avatar
      Btrfs: fix a out-of-bound access of raid_map · e34c330d
      Zhao Lei authored
      We add the number of stripes on target devices into bbio->num_stripes
      if we are under device replacement, and we just sort the raid_map of
      those stripes that not on the target devices, so if when we need
      real raid_map, we need skip the stripes on the target devices.
      Signed-off-by: default avatarZhao Lei <zhaolei@cn.fujitsu.com>
      Signed-off-by: default avatarMiao Xie <miaox@cn.fujitsu.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      e34c330d
    • Filipe Manana's avatar
      Btrfs: fix fsync log replay for inodes with a mix of regular refs and extrefs · df8d116f
      Filipe Manana authored
      If we have an inode with a large number of hard links, some of which may
      be extrefs, turn a regular ref into an extref, fsync the inode and then
      replay the fsync log (after a crash/reboot), we can endup with an fsync
      log that makes the replay code always fail with -EOVERFLOW when processing
      the inode's references.
      
      This is easy to reproduce with the test case I made for xfstests. Its steps
      are the following:
      
         _scratch_mkfs "-O extref" >> $seqres.full 2>&1
         _init_flakey
         _mount_flakey
      
         # Create a test file with 3001 hard links. This number is large enough to
         # make btrfs start using extrefs at some point even if the fs has the maximum
         # possible leaf/node size (64Kb).
         echo "hello world" > $SCRATCH_MNT/foo
         for i in `seq 1 3000`; do
             ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_`printf "%04d" $i`
         done
      
         # Make sure all metadata and data are durably persisted.
         sync
      
         # Now remove one link, add a new one with a new name, add another new one with
         # the same name as the one we just removed and fsync the inode.
         rm -f $SCRATCH_MNT/foo_link_0001
         ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_3001
         ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_0001
         rm -f $SCRATCH_MNT/foo_link_0002
         ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_3002
         ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_3003
         $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo
      
         # Simulate a crash/power loss. This makes sure the next mount
         # will see an fsync log and will replay that log.
      
         _load_flakey_table $FLAKEY_DROP_WRITES
         _unmount_flakey
      
         _load_flakey_table $FLAKEY_ALLOW_WRITES
         _mount_flakey
      
         # Check that the number of hard links is correct, we are able to remove all
         # the hard links and read the file's data. This is just to verify we don't
         # get stale file handle errors (due to dangling directory index entries that
         # point to inodes that no longer exist).
         echo "Link count: $(stat --format=%h $SCRATCH_MNT/foo)"
         [ -f $SCRATCH_MNT/foo ] || echo "Link foo is missing"
         for ((i = 1; i <= 3003; i++)); do
             name=foo_link_`printf "%04d" $i`
             if [ $i -eq 2 ]; then
                 [ -f $SCRATCH_MNT/$name ] && echo "Link $name found"
             else
                 [ -f $SCRATCH_MNT/$name ] || echo "Link $name is missing"
             fi
         done
         rm -f $SCRATCH_MNT/foo_link_*
         cat $SCRATCH_MNT/foo
         rm -f $SCRATCH_MNT/foo
      
         status=0
         exit
      
      The fix is simply to correct the overflow condition when overwriting a
      reference item because it was wrong, trying to increase the item in the
      fs/subvol tree by an impossible amount. Also ensure that we don't insert
      one normal ref and one ext ref for the same dentry - this happened because
      processing a dir index entry from the parent in the log happened when
      the normal ref item was full, which made the logic insert an extref and
      later when the normal ref had enough room, it would be inserted again
      when processing the ref item from the child inode in the log.
      
      This issue has been present since the introduction of the extrefs feature
      (2012).
      
      A test case for xfstests follows soon. This test only passes if the previous
      patch titled "Btrfs: fix fsync when extend references are added to an inode"
      is applied too.
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      df8d116f
    • Filipe Manana's avatar
      Btrfs: fix fsync when extend references are added to an inode · 2c2c452b
      Filipe Manana authored
      If we added an extended reference to an inode and fsync'ed it, the log
      replay code would make our inode have an incorrect link count, which
      was lower then the expected/correct count.
      This resulted in stale directory index entries after deleting some of
      the hard links, and any access to the dangling directory entries resulted
      in -ESTALE errors because the entries pointed to inode items that don't
      exist anymore.
      
      This is easy to reproduce with the test case I made for xfstests, and
      the bulk of that test is:
      
          _scratch_mkfs "-O extref" >> $seqres.full 2>&1
          _init_flakey
          _mount_flakey
      
          # Create a test file with 3001 hard links. This number is large enough to
          # make btrfs start using extrefs at some point even if the fs has the maximum
          # possible leaf/node size (64Kb).
          echo "hello world" > $SCRATCH_MNT/foo
          for i in `seq 1 3000`; do
              ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_`printf "%04d" $i`
          done
      
          # Make sure all metadata and data are durably persisted.
          sync
      
          # Add one more link to the inode that ends up being a btrfs extref and fsync
          # the inode.
          ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_3001
          $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo
      
          # Simulate a crash/power loss. This makes sure the next mount
          # will see an fsync log and will replay that log.
      
          _load_flakey_table $FLAKEY_DROP_WRITES
          _unmount_flakey
      
          _load_flakey_table $FLAKEY_ALLOW_WRITES
          _mount_flakey
      
          # Now after the fsync log replay btrfs left our inode with a wrong link count N,
          # which was smaller than the correct link count M (N < M).
          # So after removing N hard links, the remaining M - N directory entries were
          # still visible to user space but it was impossible to do anything with them
          # because they pointed to an inode that didn't exist anymore. This resulted in
          # stale file handle errors (-ESTALE) when accessing those dentries for example.
          #
          # So remove all hard links except the first one and then attempt to read the
          # file, to verify we don't get an -ESTALE error when accessing the inodel
          #
          # The btrfs fsck tool also detected the incorrect inode link count and it
          # reported an error message like the following:
          #
          # root 5 inode 257 errors 2001, no inode item, link count wrong
          #   unresolved ref dir 256 index 2978 namelen 13 name foo_link_2976 filetype 1 errors 4, no inode ref
          #
          # The fstests framework automatically calls fsck after a test is run, so we
          # don't need to call fsck explicitly here.
      
          rm -f $SCRATCH_MNT/foo_link_*
          cat $SCRATCH_MNT/foo
      
          status=0
          exit
      
      So make sure an fsync always flushes the delayed inode item, so that the
      fsync log contains it (needed in order to trigger the link count fixup
      code) and fix the extref counting function, which always return -ENOENT
      to its caller (and made it assume there were always 0 extrefs).
      
      This issue has been present since the introduction of the extrefs feature
      (2012).
      
      A test case for xfstests follows soon.
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      2c2c452b
    • Filipe Manana's avatar
      Btrfs: fix directory inconsistency after fsync log replay · d36808e0
      Filipe Manana authored
      If we have an inode (file) with a link count greater than 1, remove
      one of its hard links, fsync the inode, power fail/crash and then
      replay the fsync log on the next mount, we end up getting the parent
      directory's metadata inconsistent - its i_size still reflects the
      deleted hard link and has dangling index entries (with no matching
      inode reference entries). This prevents the directory from ever being
      deletable, as its i_size can never decrease to BTRFS_EMPTY_DIR_SIZE
      even if all of its children inodes are deleted, and the dangling index
      entries can never be removed (as they point to an inode that does not
      exist anymore).
      
      This is easy to reproduce with the following excerpt from the test case
      for xfstests that I just made:
      
          _scratch_mkfs >> $seqres.full 2>&1
      
          _init_flakey
          _mount_flakey
      
          # Create a test file with 2 hard links in the same directory.
          mkdir -p $SCRATCH_MNT/a/b
          echo "hello world" > $SCRATCH_MNT/a/b/foo
          ln $SCRATCH_MNT/a/b/foo $SCRATCH_MNT/a/b/bar
      
          # Make sure all metadata and data are durably persisted.
          sync
      
          # Now remove one of the hard links and fsync the inode.
          rm -f $SCRATCH_MNT/a/b/bar
          $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/a/b/foo
      
          # Simulate a crash/power loss. This makes sure the next mount
          # will see an fsync log and will replay that log.
      
          _load_flakey_table $FLAKEY_DROP_WRITES
          _unmount_flakey
      
          _load_flakey_table $FLAKEY_ALLOW_WRITES
          _mount_flakey
      
          # Remove the last hard link of the file and attempt to remove its parent
          # directory - this failed in btrfs because the fsync log and replay code
          # didn't decrement the parent directory's i_size and left dangling directory
          # index entries - this made the btrfs rmdir implementation always fail with
          # the error -ENOTEMPTY.
          #
          # The dangling directory index entries were visible to user space, but it was
          # impossible to do anything on them (unlink, open, read, write, stat, etc)
          # because the inode they pointed to did not exist anymore.
          #
          # The parent directory's metadata inconsistency (stale index entries) was
          # also detected by btrfs' fsck tool, which is run automatically by the fstests
          # framework when the test finishes. The error message reported by fsck was:
          #
          # root 5 inode 259 errors 2001, no inode item, link count wrong
          #   unresolved ref dir 258 index 3 namelen 3 name bar filetype 1 errors 4, no inode ref
          #
          rm -f $SCRATCH_MNT/a/b/*
          rmdir $SCRATCH_MNT/a/b
          rmdir $SCRATCH_MNT/a
      
      To fix this just make sure that after an unlink, if the inode is fsync'ed,
      he parent inode is fully logged in the fsync log.
      
      A test case for xfstests follows soon.
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      d36808e0