- 23 Jan, 2021 20 commits
-
-
Hannes Reinecke authored
COMMAND_COMPLETE is defined as '0', and it is a SCSI parallel message to boot. So drop the call to set_msg_byte(). Link: https://lore.kernel.org/r/20210113090500.129644-15-hare@suse.deReviewed-by:
Benjamin Block <bblock@linux.ibm.com> Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Hannes Reinecke authored
Use standard SAM status definitions and drop the driver-defined ones. Link: https://lore.kernel.org/r/20210113090500.129644-14-hare@suse.deReviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Hannes Reinecke authored
We don't need to duplicate definitions from the common include files. Link: https://lore.kernel.org/r/20210113090500.129644-13-hare@suse.deReviewed-by:
-
Hannes Reinecke authored
SCp.status is always the SAM-defined status value, not the Linux ones. Fixup the one wrong definition. Link: https://lore.kernel.org/r/20210113090500.129644-12-hare@suse.deReviewed-by:
-
Hannes Reinecke authored
Use midlayer-defined values and drop the non-existing QUEUE_FULL case; we are checking the SCSI messages in the switch statement, and QUEUE_FULL is a SCSI status hence it can never occur here. Link: https://lore.kernel.org/r/20210113090500.129644-11-hare@suse.deReviewed-by:
-
Hannes Reinecke authored
Drop the driver-defined SCSI status codes and use the generic ones instead. Link: https://lore.kernel.org/r/20210113090500.129644-10-hare@suse.deReviewed-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
-
Hannes Reinecke authored
Replace the driver-defined SAM status definitions with the standard mid-layer defined ones. Link: https://lore.kernel.org/r/20210113090500.129644-9-hare@suse.deReviewed-by:
-
Hannes Reinecke authored
Link: https://lore.kernel.org/r/20210113090500.129644-8-hare@suse.deReviewed-by:
-
Hannes Reinecke authored
Link: https://lore.kernel.org/r/20210113090500.129644-7-hare@suse.deSigned-off-by:
-
Hannes Reinecke authored
Link: https://lore.kernel.org/r/20210113090500.129644-6-hare@suse.deSigned-off-by:
-
Hannes Reinecke authored
Link: https://lore.kernel.org/r/20210113090500.129644-5-hare@suse.deSigned-off-by:
-
Hannes Reinecke authored
Link: https://lore.kernel.org/r/20210113090500.129644-4-hare@suse.deSigned-off-by:
-
Hannes Reinecke authored
Link: https://lore.kernel.org/r/20210113090500.129644-3-hare@suse.deSigned-off-by:
-
Hannes Reinecke authored
The gdth driver refers to a SCSI parallel, PCI-only HBA RAID adapter which was manufactured by the now-defunct ICP Vortex company, later acquired by Adaptec and superseded by the aacraid series of controllers. The driver itself would require a major overhaul before any modifications can be attempted, but seeing that it's unlikely to have any users left it should rather be removed completely. Link: https://lore.kernel.org/r/20210113090500.129644-2-hare@suse.deCautiously-Acked-by:
-
Ahmed S. Darwish authored
transport_handle_cdb_direct() uses in_interrupt() to detect if it is safe to sleep. It produces a stack trace and returns with an error which is clearly for debugging. The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. transport_handle_cdb_direct() has a comment saying that it may only be invoked from process context. It invokes transport_generic_new_cmd() which performs GFP_KERNEL memory allocations. in_interrupt() does not detect all the contexts where it is invalid to sleep (for the blocking GFP_KERNEL allocation) as it fails to detect sections with disabled preemption. Replace the in_interrupt() based check with a might_sleep() annotation. Link: https://lore.kernel.org/r/20201220203638.43615-7-bigeasy@linutronix.deSigned-off-by:
Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Sebastian Andrzej Siewior authored
target_submit_cmd_map_sgls() uses in_interrupt() to crash if it returns true. The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. The usage of in_interrupt() is clearly for debugging. might_sleep() is better at this because it also detects other contexts in which it is not allowed to sleep, like preempt-disabled section. Replace BUG_ON(in_interrupt) with might_sleep(). Link: https://lore.kernel.org/r/20201220203638.43615-6-bigeasy@linutronix.deSigned-off-by:
-
Sebastian Andrzej Siewior authored
core_alua_check_nonop_delay() uses in_interrupt() to decide if it is safe to sleep. The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. core_alua_check_nonop_delay() has two callers: - target_submit_cmd_map_sgls() Kernel doc says it that it must be called from process context. Also has a BUG_ON(in_interrupt()). - iscsit_setup_scsi_cmd() Invokes iscsit_add_reject_cmd() which does GFP_KERNEL allocation and target_cmd_init_cdb() which may do GFP_KERNEL allocations. Remove the in_interrupt() check because all callers are from preemptible context. Link: https://lore.kernel.org/r/20201220203638.43615-5-bigeasy@linutronix.deSigned-off-by:
-
Sebastian Andrzej Siewior authored
The return value of iscsit_check_session_usage_count() is only checked if it was not allowed to sleep. If it returns `2' then a timer is prepared. If it returns something else or if it was allowed to sleep then it is ignored. Let iscsit_check_session_usage_count() return true if it needs to arm the timer - otherwise false. This simplifies the code flow of the only caller. Link: https://lore.kernel.org/r/20201220203638.43615-4-bigeasy@linutronix.deSigned-off-by:
-
Sebastian Andrzej Siewior authored
iscsit_check_session_usage_count() uses in_interrupt() to find out if it is safe to invoke wait_for_completion(). The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. There is only one caller of iscsit_check_session_usage_count() which already has an argument indicating if it is safe to sleep. Extend iscsit_check_session_usage_count() by an argument indicating if it may sleep. Link: https://lore.kernel.org/r/20201220203638.43615-3-bigeasy@linutronix.deSigned-off-by:
-
Sebastian Andrzej Siewior authored
iscsit_close_session() uses in_interrupt() to decide if it needs to check the return value of iscsit_check_session_usage_count() if it was not able to sleep. The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. iscsit_close_session() has two callers: - iscsit_handle_time2retain_timeout() A timer_list callback. - iscsit_close_connection() Runs in preemptible context, acquires a mutex. Add an argument to iscsit_close_session() indicating if sleeping is possible. Link: https://lore.kernel.org/r/20201220203638.43615-2-bigeasy@linutronix.deSigned-off-by:
-
- 21 Jan, 2021 17 commits
-
-
Stanley Chu authored
Manipulate clock scaling related stuff only if the host capability supports clock scaling feature to avoid redundant code execution. Link: https://lore.kernel.org/r/20210120150142.5049-4-stanley.chu@mediatek.comReviewed-by:
Can Guo <cang@codeaurora.org> Signed-off-by:
Stanley Chu <stanley.chu@mediatek.com> Signed-off-by:
-
Stanley Chu authored
hba->devfreq is zero-initialized thus it is not required to check its existence in ufshcd_add_lus() function which is invoked during initialization only. Link: https://lore.kernel.org/r/20210120150142.5049-3-stanley.chu@mediatek.comReviewed-by:
-
Stanley Chu authored
Cancelling suspend_work and resume_work is only required while suspending clk-scaling. Move these two invocations into ufshcd_suspend_clkscaling() function. Link: https://lore.kernel.org/r/20210120150142.5049-2-stanley.chu@mediatek.comReviewed-by:
-
Can Guo authored
Commit 73cc291c ("scsi: ufs: Make sure clk scaling happens only when HBA is runtime ACTIVE") is no longer needed since commit 0e9d4ca4 ("scsi: ufs: Protect some contexts from unexpected clock scaling") is a more mature fix to protect UFS LLD stability from clock scaling invoked through sysfs nodes by users. Link: https://lore.kernel.org/r/1611137065-14266-4-git-send-email-cang@codeaurora.orgReviewed-by:
-
Can Guo authored
ufshcd_hba_exit() is always called after ufshcd_exit_clk_scaling() and ufshcd_exit_clk_gating(). Move ufshcd_exit_clk_scaling/gating() to ufshcd_hba_exit(). Meanwhile, add dedicated functions to initialize and remove sysfs nodes of clock scaling/gating to make the code more readable. Overall functionality remains same. Link: https://lore.kernel.org/r/1611137065-14266-3-git-send-email-cang@codeaurora.orgReviewed-by:
-
Can Guo authored
In contexts like suspend, shutdown, and error handling we need to suspend devfreq to make sure these contexts won't be disturbed by clock scaling. However, suspending devfreq is not enough since users can still trigger a clock scaling by manipulating the devfreq sysfs nodes like min/max_freq and governor even after devfreq is suspended. Moreover, mere suspending devfreq cannot synchroinze a clock scaling which has already been invoked through these sysfs nodes. Add one more flag in struct clk_scaling and wrap the entire func ufshcd_devfreq_scale() with the clk_scaling_lock, so that we can use this flag and clk_scaling_lock to control and synchronize clock scaling invoked through devfreq sysfs nodes. Link: https://lore.kernel.org/r/1611137065-14266-2-git-send-email-cang@codeaurora.orgReviewed-by:
-
Bean Huo authored
UFS device-related flags should be grouped in ufs_dev_info. Move wb_enabled and wb_buf_flush_enabled out from struct ufs_hba, group them in struct ufs_dev_info, and align the names of the structure members vertically. Link: https://lore.kernel.org/r/20210119163847.20165-6-huobean@gmail.comReviewed-by:
Bean Huo <beanhuo@micron.com> Signed-off-by:
-
Bean Huo authored
d_wb_alloc_units and d_ext_ufs_feature_sup are only used during WB probe. They are used to confirm the condition that "if bWriteBoosterBufferType is set to 01h but dNumSharedWriteBoosterBufferAllocUnits is set to zero, the WriteBooster feature is disabled", and if UFS device supports WB. No need to keep them after probing is complete. Link: https://lore.kernel.org/r/20210119163847.20165-5-huobean@gmail.comReviewed-by:
-
Bean Huo authored
USFHCD supports both WriteBooster "LU dedicated buffer" mode and "shared buffer" mode. Update the comment accordingly in the function ufshcd_wb_probe(). Link: https://lore.kernel.org/r/20210119163847.20165-4-huobean@gmail.comReviewed-by:
-
Bean Huo authored
Adds UFS sysfs documentation for new entry wb_on. [mkp: fix doc formatting] Link: https://lore.kernel.org/r/20210119163847.20165-3-huobean@gmail.comSigned-off-by:
-
Bean Huo authored
Currently UFS WriteBooster driver uses clock scaling up/down to set WB on/off. For the platforms which don't support UFSHCD_CAP_CLK_SCALING, WB will be always on. Provide a sysfs attribute to enable/disable WB during runtime. Write 1/0 to "wb_on" sysfs node to enable/disable UFS WB. Link: https://lore.kernel.org/r/20210119163847.20165-2-huobean@gmail.comReviewed-by:
Avri Altman <avri.altman@wdc.com> Reviewed-by:
-
Kiwoong Kim authored
Exynos needs scatterlist entries aligned to page size because it isn't capable of transferring data contained in one DATA IN operation to seversal areas in memory. Link: https://lore.kernel.org/r/80d7e27d6ec537e650a6bd74897b6c60618efcdc.1611026909.git.kwmad.kim@samsung.comSigned-off-by:
Kiwoong Kim <kwmad.kim@samsung.com> Signed-off-by:
-
Kiwoong Kim authored
Some SoCs require a single scatterlist entry for smaller than page size, i.e. 4KB. When dispatching commands with more than one scatterlist entry under 4KB in size the following behavior is observed: A command to read a block range is dispatched with two scatterlist entries that are named AAA and BBB. After dispatching, the host builds two PRDT entries and during transmission, device sends just one DATA IN because device doesn't care about host DMA. The host then transfers the combined amount of data from start address of the area named AAA. As a consequence, the area that follows AAA in memory would be corrupted. |<------------->| +-------+------------ +-------+ + AAA + (corrupted) ... + BBB + +-------+------------ +-------+ To avoid this we need to enforce page size alignment for sg entries. Link: https://lore.kernel.org/r/56dddef94f60bd9466fd77e69f64bbbd657ed2a1.1611026909.git.kwmad.kim@samsung.comSigned-off-by: -
Bean Huo authored
Once going into while-do loop, intr_status is already true, this if-statement is redundant, remove it. Link: https://lore.kernel.org/r/20210118201233.3043-1-huobean@gmail.comReviewed-by:
-
Colin Ian King authored
There is a spelling mistake in a ibmvfc_dbg debug message. Fix it. Link: https://lore.kernel.org/r/20210118111346.70798-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'pm8001_init_ccb_tag()' GFP_KERNEL can be used because this function already uses this flag a few lines above. While at it, remove "pm80xx: " in a debug message. 'pm8001_dbg()' already adds the driver name in the message. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Link: https://lore.kernel.org/r/20210117132445.562552-1-christophe.jaillet@wanadoo.frAcked-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Colin Ian King authored
A block of code is indented one level too deeply, clean this up. Link: https://lore.kernel.org/r/20210115095824.9170-1-colin.king@canonical.comAcked-by:
-
- 20 Jan, 2021 1 commit
-
-
Martin K. Petersen authored
Pull in the 5.11 SCSI fixes branch to provide an updated baseline for megaraid and hisi_sas. Both drivers received core changes in v5.11-rc3. Signed-off-by:
-
- 15 Jan, 2021 2 commits
-
-
Muneendra Kumar authored
Add support for eh_should_retry_cmd callback in lpfc_template. Link: https://lore.kernel.org/r/1609969748-17684-6-git-send-email-muneendra.kumar@broadcom.comReviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Reviewed-by:
Muneendra Kumar <muneendra.kumar@broadcom.com> Signed-off-by:
-
Muneendra Kumar authored
Add store capability to the rport port_state using sysfs under fc_remote_ports/rport-*/port_state. With this the user can move the port_state from Marginal->Online and Online->Marginal. - Marginal: This interface will set SCMD_NORETRIES_ABORT bit in scmd->state for all the pending I/Os on the SCSI device associated with target port. - Online: This interface will clear SCMD_NORETRIES_ABORT bit in scmd->state for all the pending I/Os on the SCSI device associated with target port. The following interface is provided to set the port state to Marginal and Online respectively: echo "Marginal" >> /sys/class/fc_remote_ports/rport-X\:Y-Z/port_state echo "Online" >> /sys/class/fc_remote_ports/rport-X\:Y-Z/port_state Link: https://lore.kernel.org/r/1609969748-17684-5-git-send-email-muneendra.kumar@broadcom.comReviewed-by:
-
