- 11 Feb, 2015 21 commits
-
-
Michal Hocko authored
commit f5e03a49 upstream. It has been reported that 965GM might trigger VM_BUG_ON_PAGE(!lrucare && PageLRU(oldpage), oldpage) in mem_cgroup_migrate when shmem wants to replace a swap cache page because of shmem_should_replace_page (the page is allocated from an inappropriate zone). shmem_replace_page expects that the oldpage is not on LRU list and calls mem_cgroup_migrate without lrucare. This is obviously incorrect because swapcache pages might be on the LRU list (e.g. swapin readahead page). Fix this by enabling lrucare for the migration in shmem_replace_page. Also clarify that lrucare should be used even if one of the pages might be on LRU list. The BUG_ON will trigger only when CONFIG_DEBUG_VM is enabled but even without that the migration code might leave the old page on an inappropriate memcg' LRU which is not that critical because the page would get removed with its last reference but it is still confusing. Fixes: 0a31bc97 ("mm: memcontrol: rewrite uncharge API") Signed-off-by:
Michal Hocko <mhocko@suse.cz> Reported-by:
Chris Wilson <chris@chris-wilson.co.uk> Reported-by:
Dave Airlie <airlied@gmail.com> Acked-by:
Hugh Dickins <hughd@google.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
karl beldan authored
commit 150ae0e9 upstream. The carry from the 64->32bits folding was dropped, e.g with: saddr=0xFFFFFFFF daddr=0xFF0000FF len=0xFFFF proto=0 sum=1, csum_tcpudp_nofold returned 0 instead of 1. Signed-off-by:
Karl Beldan <karl.beldan@rivierawaves.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mike Frysinger <vapier@gentoo.org> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Shiraz Hashim authored
commit 23aaed66 upstream. walk_page_range() silently skips vma having VM_PFNMAP set, which leads to undesirable behaviour at client end (who called walk_page_range). Userspace applications get the wrong data, so the effect is like just confusing users (if the applications just display the data) or sometimes killing the processes (if the applications do something with misunderstanding virtual addresses due to the wrong data.) For example for pagemap_read, when no callbacks are called against VM_PFNMAP vma, pagemap_read may prepare pagemap data for next virtual address range at wrong index. Eventually userspace may get wrong pagemap data for a task. Corresponding to a VM_PFNMAP marked vma region, kernel may report mappings from subsequent vma regions. User space in turn may account more pages (than really are) to the task. In my case I was using procmem, procrack (Android utility) which uses pagemap interface to account RSS pages of a task. Due to this bug it was giving a wrong picture for vmas (with VM_PFNMAP set). Fixes: a9ff785e ("mm/pagewalk.c: walk_page_range should avoid VM_PFNMAP areas") Signed-off-by:
Shiraz Hashim <shashim@codeaurora.org> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
NeilBrown authored
commit b1b02fe9 upstream. If a non-page-aligned write is destined for a device which is missing/faulty, we can deadlock. As the target device is missing, a read-modify-write cycle is not possible. As the write is not for a full-page, a recontruct-write cycle is not possible. This should be handled by logic in fetch_block() which notices there is a non-R5_OVERWRITE write to a missing device, and so loads all blocks. However since commit 67f45548, that code requires STRIPE_PREREAD_ACTIVE before it will active, and those circumstances never set STRIPE_PREREAD_ACTIVE. So: in handle_stripe_dirtying, if neither rmw or rcw was possible, set STRIPE_DELAYED, which will cause STRIPE_PREREAD_ACTIVE be set after a suitable delay. Fixes: 67f45548Reported-by:
Mikulas Patocka <mpatocka@redhat.com> Tested-by:
Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Sachin Prabhu authored
commit ca7df8e0 upstream. Commit c11f1df5 requires writers to wait for any pending oplock break handler to complete before proceeding to write. This is done by waiting on bit CIFS_INODE_PENDING_OPLOCK_BREAK in cifsFileInfo->flags. This bit is cleared by the oplock break handler job queued on the workqueue once it has completed handling the oplock break allowing writers to proceed with writing to the file. While testing, it was noticed that the filehandle could be closed while there is a pending oplock break which results in the oplock break handler on the cifsiod workqueue being cancelled before it has had a chance to execute and clear the CIFS_INODE_PENDING_OPLOCK_BREAK bit. Any subsequent attempt to write to this file hangs waiting for the CIFS_INODE_PENDING_OPLOCK_BREAK bit to be cleared. We fix this by ensuring that we also clear the bit CIFS_INODE_PENDING_OPLOCK_BREAK when we remove the oplock break handler from the workqueue. The bug was found by Red Hat QA while testing using ltp's fsstress command. Signed-off-by:
Sachin Prabhu <sprabhu@redhat.com> Acked-by:
Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by:
Jeff Layton <jlayton@samba.org> Signed-off-by:
Steve French <steve.french@primarydata.com> Signed-off-by:
-
Will Deacon authored
commit 8e648066 upstream. Commit e1a5848e ("ARM: 7924/1: mm: don't bother with reserved ttbr0 when running with LPAE") removed the use of the reserved TTBR0 value for LPAE systems, since the ASID is held in the TTBR and can be updated atomicly with the pgd of the next mm. Unfortunately, this patch forgot to update flush_context, which deliberately avoids marking the local active ASID as allocated, since we used to switch via ASID zero and didn't need to allocate the ASID of the previous mm. The side-effect of this is that we can allocate the same ASID to the next mm and, between flushing the local TLB and updating TTBR0, we can perform speculative TLB fills for userspace nG mappings using the page table of the previous mm. The consequence of this is that the next mm can erroneously hit some mappings of the previous mm. Note that this was made significantly harder to hit by a391263c ("ARM: 8203/1: mm: try to re-use old ASID assignments following a rollover") but is still theoretically possible. This patch fixes the problem by removing the code from flush_context that forces the allocated ASID to zero for the local CPU. Many thanks to the Broadcom guys for tracking this one down. Fixes: e1a5848e ("ARM: 7924/1: mm: don't bother with reserved ttbr0 when running with LPAE") Reported-by:
Raymond Ngun <rngun@broadcom.com> Tested-by:
Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
James Hogan authored
commit d76e9b9f upstream. Commit 842dfc11 ("MIPS: Fix build with binutils 2.24.51+") in v3.18 enabled -msoft-float and sprinkled ".set hardfloat" where necessary to use FP instructions. However it missed enable_restore_fp_context() which since v3.17 does a ctc1 with inline assembly, causing the following assembler errors on Mentor's 2014.05 toolchain: {standard input}: Assembler messages: {standard input}:2913: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ctc1 $2,$31' scripts/Makefile.build:257: recipe for target 'arch/mips/kernel/traps.o' failed Fix that to use the new write_32bit_cp1_register() macro so that ".set hardfloat" is automatically added when -msoft-float is in use. Fixes 842dfc11 ("MIPS: Fix build with binutils 2.24.51+") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9173/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
James Hogan authored
commit 5e32033e upstream. Add a write_32bit_cp1_register() macro to compliment the read_32bit_cp1_register() macro. This is to abstract whether .set hardfloat needs to be used based on GAS_HAS_SET_HARDFLOAT. The implementation of _read_32bit_cp1_register() .sets mips1 due to failure of gas v2.19 to assemble cfc1 for Octeon (see commit 25c30003 ("MIPS: Override assembler target architecture for octeon.")). I haven't copied this over to _write_32bit_cp1_register() as I'm uncertain whether it applies to ctc1 too, or whether anybody cares about that version of binutils any longer. Signed-off-by:
-
Hemmo Nieminen authored
commit c7754e75 upstream. As printk() invocation can cause e.g. a TLB miss, printk() cannot be called before the exception handlers have been properly initialized. This can happen e.g. when netconsole has been loaded as a kernel module and the TLB table has been cleared when a CPU was offline. Call cpu_report() in start_secondary() only after the exception handlers have been initialized to fix this. Without the patch the kernel will randomly either lockup or crash after a CPU is onlined and the console driver is a module. Signed-off-by:
Hemmo Nieminen <hemmo.nieminen@iki.fi> Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8953/Signed-off-by:
-
Aaro Koskinen authored
commit 63a87fe0 upstream. octeon_cpu_disable() will unconditionally enable interrupts when called. We can assume that the routine is always called with interrupts disabled, so just delete the incorrect local_irq_disable/enable(). The patch fixes the following crash when offlining a CPU: [ 93.818785] ------------[ cut here ]------------ [ 93.823421] WARNING: CPU: 1 PID: 10 at kernel/smp.c:231 flush_smp_call_function_queue+0x1c4/0x1d0() [ 93.836215] Modules linked in: [ 93.839287] CPU: 1 PID: 10 Comm: migration/1 Not tainted 3.19.0-rc4-octeon-los_b5f0 #1 [ 93.847212] Stack : 0000000000000001 ffffffff81b2cf90 0000000000000004 ffffffff81630000 0000000000000000 0000000000000000 0000000000000000 000000000000004a 0000000000000006 ffffffff8117e550 0000000000000000 0000000000000000 ffffffff81b30000 ffffffff81b26808 8000000032c77748 ffffffff81627e07 ffffffff81595ec8 ffffffff81b26808 000000000000000a 0000000000000001 0000000000000001 0000000000000003 0000000010008ce1 ffffffff815030c8 8000000032cbbb38 ffffffff8113d42c 0000000010008ce1 ffffffff8117f36c 8000000032c77300 8000000032cbba50 0000000000000001 ffffffff81503984 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ffffffff81121668 0000000000000000 0000000000000000 ... [ 93.912819] Call Trace: [ 93.915273] [<ffffffff81121668>] show_stack+0x68/0x80 [ 93.920335] [<ffffffff81503984>] dump_stack+0x6c/0x90 [ 93.925395] [<ffffffff8113d58c>] warn_slowpath_common+0x94/0xd8 [ 93.931324] [<ffffffff811a402c>] flush_smp_call_function_queue+0x1c4/0x1d0 [ 93.938208] [<ffffffff811a4128>] hotplug_cfd+0xf0/0x108 [ 93.943444] [<ffffffff8115bacc>] notifier_call_chain+0x5c/0xb8 [ 93.949286] [<ffffffff8113d704>] cpu_notify+0x24/0x60 [ 93.954348] [<ffffffff81501738>] take_cpu_down+0x38/0x58 [ 93.959670] [<ffffffff811b343c>] multi_cpu_stop+0x154/0x180 [ 93.965250] [<ffffffff811b3768>] cpu_stopper_thread+0xd8/0x160 [ 93.971093] [<ffffffff8115ea4c>] smpboot_thread_fn+0x1ec/0x1f8 [ 93.976936] [<ffffffff8115ab04>] kthread+0xd4/0xf0 [ 93.981735] [<ffffffff8111c4f0>] ret_from_kernel_thread+0x14/0x1c [ 93.987835] [ 93.989326] ---[ end trace c9e3815ee655bda9 ]--- [ 93.993951] Kernel bug detected[#1]: [ 93.997533] CPU: 1 PID: 10 Comm: migration/1 Tainted: G W 3.19.0-rc4-octeon-los_b5f0 #1 [ 94.006591] task: 8000000032c77300 ti: 8000000032cb8000 task.ti: 8000000032cb8000 [ 94.014081] $ 0 : 0000000000000000 0000000010000ce1 0000000000000001 ffffffff81620000 [ 94.022146] $ 4 : 8000000002c72ac0 0000000000000000 00000000000001a7 ffffffff813b06f0 [ 94.030210] $ 8 : ffffffff813b20d8 0000000000000000 0000000000000000 ffffffff81630000 [ 94.038275] $12 : 0000000000000087 0000000000000000 0000000000000086 0000000000000000 [ 94.046339] $16 : ffffffff81623168 0000000000000001 0000000000000000 0000000000000008 [ 94.054405] $20 : 0000000000000001 0000000000000001 0000000000000001 0000000000000003 [ 94.062470] $24 : 0000000000000038 ffffffff813b7f10 [ 94.070536] $28 : 8000000032cb8000 8000000032cbbc20 0000000010008ce1 ffffffff811bcaf4 [ 94.078601] Hi : 0000000000f188e8 [ 94.082179] Lo : d4fdf3b646c09d55 [ 94.085760] epc : ffffffff811bc9d0 irq_work_run_list+0x8/0xf8 [ 94.091686] Tainted: G W [ 94.095613] ra : ffffffff811bcaf4 irq_work_run+0x34/0x60 [ 94.101192] Status: 10000ce3 KX SX UX KERNEL EXL IE [ 94.106235] Cause : 40808034 [ 94.109119] PrId : 000d9301 (Cavium Octeon II) [ 94.113653] Modules linked in: [ 94.116721] Process migration/1 (pid: 10, threadinfo=8000000032cb8000, task=8000000032c77300, tls=0000000000000000) [ 94.127168] Stack : 8000000002c74c80 ffffffff811a4128 0000000000000001 ffffffff81635720 fffffffffffffff2 ffffffff8115bacc 80000000320fbce0 80000000320fbca4 80000000320fbc80 0000000000000002 0000000000000004 ffffffff8113d704 80000000320fbce0 ffffffff81501738 0000000000000003 ffffffff811b343c 8000000002c72aa0 8000000002c72aa8 ffffffff8159cae8 ffffffff8159caa0 ffffffff81650000 80000000320fbbf0 80000000320fbc80 ffffffff811b32e8 0000000000000000 ffffffff811b3768 ffffffff81622b80 ffffffff815148a8 8000000032c77300 8000000002c73e80 ffffffff815148a8 8000000032c77300 ffffffff81622b80 ffffffff815148a8 8000000032c77300 ffffffff81503f48 ffffffff8115ea0c ffffffff81620000 0000000000000000 ffffffff81174d64 ... [ 94.192771] Call Trace: [ 94.195222] [<ffffffff811bc9d0>] irq_work_run_list+0x8/0xf8 [ 94.200802] [<ffffffff811bcaf4>] irq_work_run+0x34/0x60 [ 94.206036] [<ffffffff811a4128>] hotplug_cfd+0xf0/0x108 [ 94.211269] [<ffffffff8115bacc>] notifier_call_chain+0x5c/0xb8 [ 94.217111] [<ffffffff8113d704>] cpu_notify+0x24/0x60 [ 94.222171] [<ffffffff81501738>] take_cpu_down+0x38/0x58 [ 94.227491] [<ffffffff811b343c>] multi_cpu_stop+0x154/0x180 [ 94.233072] [<ffffffff811b3768>] cpu_stopper_thread+0xd8/0x160 [ 94.238914] [<ffffffff8115ea4c>] smpboot_thread_fn+0x1ec/0x1f8 [ 94.244757] [<ffffffff8115ab04>] kthread+0xd4/0xf0 [ 94.249555] [<ffffffff8111c4f0>] ret_from_kernel_thread+0x14/0x1c [ 94.255654] [ 94.257146] Code: a2423c40 40026000 30420001 <00020336> dc820000 10400037 00000000 0000010f 0000010f [ 94.267183] ---[ end trace c9e3815ee655bdaa ]--- [ 94.271804] Fatal exception: panic in 5 seconds Reported-by:
David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8952/Signed-off-by:
-
Felix Fietkau authored
commit a3e6c1ef upstream. If the irq_chip does not define .irq_disable, any call to disable_irq will defer disabling the IRQ until it fires while marked as disabled. This assumes that the handler function checks for this condition, which handle_percpu_irq does not. In this case, calling disable_irq leads to an IRQ storm, if the interrupt fires while disabled. This optimization is only useful when disabling the IRQ is slow, which is not true for the MIPS CPU IRQ. Disable this optimization by implementing .irq_disable and .irq_enable Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8949/Signed-off-by:
-
David Daney authored
commit 9ead8632 upstream. The following commits: 5890f70f (MIPS: Use dedicated exception handler if CPU supports RI/XI exceptions) 6575b1d4 (MIPS: kernel: cpu-probe: Detect unique RI/XI exceptions) break the kernel for *all* existing MIPS CPUs that implement the CP0_PageGrain[IEC] bit. They cause the TLB exception handlers to be generated without the legacy execute-inhibit handling, but never set the CP0_PageGrain[IEC] bit to activate the use of dedicated exception vectors for execute-inhibit exceptions. The result is that upon detection of an execute-inhibit violation, we loop forever in the TLB exception handlers instead of sending SIGSEGV to the task. If we are generating TLB exception handlers expecting separate vectors, we must also enable the CP0_PageGrain[IEC] feature. The bug was introduced in kernel version 3.17. Signed-off-by:
-
Brian King authored
commit 3a9794d3 upstream. The following patch fixes an issue observed with 4k sector disks where the max_hw_sectors attribute was getting set too large in sd_revalidate_disk. Since sdkp->max_xfer_blocks is in units of SCSI logical blocks and queue_max_hw_sectors is in units of 512 byte blocks, on a 4k sector disk, every time we went through sd_revalidate_disk, we were taking the current value of queue_max_hw_sectors and increasing it by a factor of 8. Fix this by only shifting sdkp->max_xfer_blocks. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Robin Gong authored
commit a02bb401 upstream. For TKT238285 hardware issue which may cause txfifo store data twice can only be caught on i.mx6dl, we use pio mode instead of DMA mode on i.mx6dl. Fixes: f62caccd (spi: spi-imx: add DMA support) Signed-off-by:
Robin Gong <b38343@freescale.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Bhuvanchandra DV authored
commit 973fbce6 upstream. devm_* API was supposed to be used only in probe function call. Memory is allocated at 'probe' and free automatically at 'remove'. Usage of devm_* functions outside probe sometimes leads to memory leak. Avoid using devm_kzalloc in dspi_setup_transfer and use kzalloc instead. Also add the dspi_cleanup function to free the controller data upon cleanup. Acked-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Signed-off-by:
-
Myron Stowe authored
commit 06cf35f9 upstream. Some AMD CS553x devices have read-only BARs because of a firmware or hardware defect. There's a workaround in quirk_cs5536_vsa(), but it no longer works after 36e81648 ("PCI: Restore detection of read-only BARs"). Prior to 36e81648, we filled in res->start; afterwards we leave it zeroed out. The quirk only updated the size, so the driver tried to use a region starting at zero, which didn't work. Expand quirk_cs5536_vsa() to read the base addresses from the BARs and hard-code the sizes. On Nix's system BAR 2's read-only value is 0x6200. Prior to 36e81648, we interpret that as a 512-byte BAR based on the lowest-order bit set. Per datasheet sec 5.6.1, that BAR (MFGPT) requires only 64 bytes; use that to avoid clearing any address bits if a platform uses only 64-byte alignment. [bhelgaas: changelog, reduce BAR 2 size to 64] Fixes: 36e81648 ("PCI: Restore detection of read-only BARs") Link: https://bugzilla.kernel.org/show_bug.cgi?id=85991#c4 Link: http://support.amd.com/TechDocs/31506_cs5535_databook.pdf Link: http://support.amd.com/TechDocs/33238G_cs5536_db.pdfReported-and-tested-by:
Nix <nix@esperi.org.uk> Signed-off-by:
Myron Stowe <myron.stowe@redhat.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Charlotte Richardson authored
commit 51ac3d2f upstream. NEC OEMs the same platforms as Stratus does, which have multiple devices on some PCIe buses under downstream ports. Link: https://bugzilla.kernel.org/show_bug.cgi?id=51331 Fixes: 1278998f ("PCI: Work around Stratus ftServer broken PCIe hierarchy (fix DMI check)") Signed-off-by:
Charlotte Richardson <charlotte.richardson@stratus.com> Signed-off-by:
-
Lucas Stach authored
commit 19c5392e upstream. The DesignWare PCIe MSI hardware does not support MSI-X IRQs. Setting those up failed as a side effect of a bug which was fixed by 91f8ae82 ("PCI: designware: Setup and clear exactly one MSI at a time"). Now that this bug is fixed, MSI-X IRQs need to be rejected explicitly; otherwise devices trying to use them may end up with incorrectly working interrupts. Fixes: 91f8ae82 ("PCI: designware: Setup and clear exactly one MSI at a time") Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Sonic Zhang authored
commit b184c388 upstream. Create default gpio base if neither device node nor platform data is defined. Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Reviewed-by:
Alexandre Courbot <acourbot@nvidia.com> Tested-by:
Antonio Fiol <antonio@fiol.es> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Johan Hovold authored
commit 49d2ca84 upstream. Fix memory leak in the gpio sysfs interface due to failure to drop reference to device returned by class_find_device when setting the gpio-line polarity. Fixes: 07697461 ("gpiolib: add support for changing value polarity in sysfs") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 0f303db0 upstream. Fix memory leak in the gpio sysfs interface due to failure to drop reference to device returned by class_find_device when creating a link. Fixes: a4177ee7 ("gpiolib: allow exported GPIO nodes to be named using sysfs links") Signed-off-by:
-
- 06 Feb, 2015 19 commits
-
-
Greg Kroah-Hartman authored
-
Stefano Stabellini authored
commit a4dba130 upstream. Introduce an arch specific function to find out whether a particular dma mapping operation needs to bounce on the swiotlb buffer. On ARM and ARM64, if the page involved is a foreign page and the device is not coherent, we need to bounce because at unmap time we cannot execute any required cache maintenance operations (we don't know how to find the pfn from the mfn). No change of behaviour for x86. Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by:
David Vrabel <david.vrabel@citrix.com> Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Ian Campbell <ian.campbell@citrix.com> Acked-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Catalin Marinas authored
commit d6ad3691 upstream. Commit 0b46b8a7 (clocksource: arch_timer: Fix code to use physical timers when requested) introduces the use of physical counters in the ARM architected timer driver. However, he arm64 kernel uses CNTVCT in VDSO. When booting in EL2, the kernel switches to the physical timers to make things easier for KVM but it continues to use the virtual counter both in user and kernel. While in such scenario CNTVCT == CNTPCT (since CNTVOFF is initialised by the kernel to 0), we want to spot firmware bugs corrupting CNTVOFF early (which would affect CNTVCT). Signed-off-by:
Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 0b46b8a7 ("clocksource: arch_timer: Fix code to use physical timers when requested") Cc: Ian Campbell <ijc@hellion.org.uk> Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
-
Viktor Babrian authored
commit 7ffd7b4e upstream. Put controller into init mode in network stop to end pending transmissions. The issue is observed in cases when transmitted frame is not acked. Signed-off-by:
Viktor Babrian <babrian.viktor@renyi.mta.hu> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Andrew Duggan authored
commit 8414947a upstream. If a touchpad reports the F11 data40 register then this indicates that the touchpad reports additional ACM (Accidental Contact Mitigation) data after the F11 data in the HID attention report. These additional bytes shift the position of the F30 button data causing the driver to incorrectly report button state when this functionality is present. This patch accounts for the additional data in the report. Fixes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1398533Signed-off-by:
Andrew Duggan <aduggan@synaptics.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Cc: Joseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by:
-
Stephane Eranian authored
commit 98b008df upstream. This patch fixes a systematic crash in rapl_scale() due to an invalid pointer. The bug was introduced by commit: 89cbc767 ("x86: Replace __get_cpu_var uses") The fix is simple. Just put the parenthesis where it needs to be, i.e., around rapl_pmu. To my surprise, the compiler was not complaining about passing an integer instead of a pointer. Reported-by:
Vince Weaver <vincent.weaver@maine.edu> Tested-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: cl@linux.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20150122203834.GA10228@thinkpadSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Kan Liang authored
commit ef454cae upstream. Intel Airmont supports the same architectural and non-architectural performance monitoring events as Silvermont. Signed-off-by:
Kan Liang <kan.liang@intel.com> Signed-off-by:
-
Greg Thelen authored
commit 0346dadb upstream. Commit e61734c5 ("cgroup: remove cgroup->name") added two extra newlines to memcg oom kill log messages. This makes dmesg hard to read and parse. The issue affects 3.15+. Example: Task in /t <<< extra #1 killed as a result of limit of /t <<< extra #2 memory: usage 102400kB, limit 102400kB, failcnt 274712 Remove the extra newlines from memcg oom kill messages, so the messages look like: Task in /t killed as a result of limit of /t memory: usage 102400kB, limit 102400kB, failcnt 240649 Fixes: e61734c5 ("cgroup: remove cgroup->name") Signed-off-by:
Greg Thelen <gthelen@google.com> Acked-by:
-
Jan Kara authored
commit 14bf61ff upstream. Currently ->get_dqblk() and ->set_dqblk() use struct fs_disk_quota which tracks space limits and usage in 512-byte blocks. However VFS quotas track usage in bytes (as some filesystems require that) and we need to somehow pass this information. Upto now it wasn't a problem because we didn't do any unit conversion (thus VFS quota routines happily stuck number of bytes into d_bcount field of struct fd_disk_quota). Only if you tried to use Q_XGETQUOTA or Q_XSETQLIM for VFS quotas (or Q_GETQUOTA / Q_SETQUOTA for XFS quotas), you got bogus results. Hardly anyone tried this but reportedly some Samba users hit the problem in practice. So when we want interfaces compatible we need to fix this. We bite the bullet and define another quota structure used for passing information from/to ->get_dqblk()/->set_dqblk. It's somewhat sad we have to have more conversion routines in fs/quota/quota.c and another copying of quota structure slows down getting of quota information by about 2% but it seems cleaner than overloading e.g. units of d_bcount to bytes. Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jeremiah Mahler authored
commit 13f3fbe8 upstream. commit 6dda730e Author: Jani Nikula <jani.nikula@intel.com> Date: Tue Jun 24 18:27:40 2014 +0300 drm/i915: respect the VBT minimum backlight brightness introduced a bug which resulted in inconsistent brightness levels on different machines. If a suspended was entered with the screen off some machines would resume with the screen at minimum brightness and others at maximum brightness. The following commands can be used to produce this behavior. xset dpms force off sleep 1 sudo systemctl suspend (resume ...) The root cause of this problem is a comparison which checks to see if the backlight level is zero when the panel is enabled. If it is zero, it is set to the maximum level. Unfortunately, not all machines have a minimum level of zero. On those machines the level is left at the minimum instead of begin set to the maximum. Fix the bug by updating the comparison to check for the minimum backlight level instead of zero. Also, expand the comparison for the possible case when the level is less than the minimum. Fixes: 6dda730e ("respect the VBT minimum backlight brightness") Signed-off-by:
Jeremiah Mahler <jmmahler@gmail.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
David Woodhouse authored
commit f48a0165 upstream. Commit 82460d97 ("drm/i915: Rework ppgtt init to no require an aliasing ppgtt") introduced a regression on Broadwell, triggering the following IOMMU fault at startup: vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem dmar: DRHD: handling fault status reg 2 dmar: DMAR:[DMA Write] Request device [00:02.0] fault addr 880000 DMAR:[fault reason 23] Unknown fbcon: inteldrmfb (fb0) is primary device Further commentary from Daniel: I sugggested this change to David after staring at the offending patch for a while. I have no idea and theory whatsoever why this would upset the gpu less than the other way round. But it seems to work. David promised to chase hw people a bit more to get a more meaningful answer. Wrt the comment that this deletes: I've done some digging and afaict loading context before ppgtt enable was once required before our recent restructuring of the context/ppgtt init code: Before that context sw setup (i.e. allocating the default context) and hw setup was smashed together. Also the setup of the default context was the bit that actually allocated the aliasing ppgtt structures. Which is the reason for the context before ppgtt depency. Or was, since with all the untangling there's no no real depency any more (functional, who knows what the hw is doing), so the comment is just stale. Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Rodrigo Vivi authored
commit 6b96d705 upstream. BDW with PCI-IDs ended in "2" aren't ULT, but HALO. Let's fix it and at least allow VGA to work on this units. v2: forgot ammend and v1 doesn't compile Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87220 Cc: Xion Zhang <xiong.y.zhang@intel.com> Cc: Guo Jinxian <jinxianx.guo@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Bob Paauwe authored
commit af1a7301 upstream. When creating a fence for a tiled object, only fence the area that makes up the actual tiles. The object may be larger than the tiled area and if we allow those extra addresses to be fenced, they'll get converted to addresses beyond where the object is mapped. This opens up the possiblity of writes beyond the end of object. To prevent this, we adjust the size of the fence to only encompass the area that makes up the actual tiles. The extra space is considered un-tiled and now behaves as if it was a linear object. Testcase: igt/gem_tiled_fence_overflow Reported-by:
Dan Hettena <danh@ghs.com> Signed-off-by:
Bob Paauwe <bob.j.paauwe@intel.com> Reviewed-by:
-
Rob Clark authored
commit 2148f18f upstream. VT switch back/forth from console to xserver (for example) has potential to go horribly wrong if a dynamic DP MST connector ends up in the saved modeset that is restored when switching back to fbcon. When removing a dynamic connector, don't forget to clean up the saved state. v1: original v2: null out set->fb if no more connectors to avoid making i915 cranky Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1184968Signed-off-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Mugunthan V N authored
commit 02a54164 upstream. In Dual EMAC, the default VLANs are used to segregate Rx packets between the ports, so adding the same default VLAN to the switch will affect the normal packet transfers. So returning error on addition of dual EMAC default VLANs. Even if EMAC 0 default port VLAN is added to EMAC 1, it will lead to break dual EMAC port separations. Fixes: d9ba8f9e (driver: net: ethernet: cpsw: dual emac interface implementation) Reported-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by:
-
Ashay Jaiswal authored
commit 83b0302d upstream. The regulator framework maintains a list of consumer regulators for a regulator device and protects it from concurrent access using the regulator device's mutex lock. In the case of regulator_put() the consumer is removed and regulator device's parameters are updated without holding the regulator device's mutex. This would lead to a race condition between the regulator_put() and any function which traverses the consumer list or modifies regulator device's parameters. Fix this race condition by holding the regulator device's mutex in case of regulator_put. Signed-off-by:
Ashay Jaiswal <ashayj@codeaurora.org> Signed-off-by:
-
Andrey Ryabinin authored
commit 45cd15e6 upstream. Array of platform_device_id elements should be terminated with empty element. Fixes: 5bccae6e ("rtc: s5m-rtc: add real-time clock driver for s5m8767") Signed-off-by:
Andrey Ryabinin <a.ryabinin@samsung.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Mika Westerberg authored
commit c957e8f0 upstream. Once the current message is finished, the driver notifies SPI core about this by calling spi_finalize_current_message(). This function queues next message to be transferred. If there are more messages in the queue, it is possible that the driver is asked to transfer the next message at this point. When spi_finalize_current_message() returns the driver clears the drv_data->cur_chip pointer to NULL. The problem is that if the driver already started the next message clearing drv_data->cur_chip will cause NULL pointer dereference which crashes the kernel like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 IP: [<ffffffffa0022bc8>] cs_deassert+0x18/0x70 [spi_pxa2xx_platform] PGD 78bb8067 PUD 37712067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 1 PID: 11 Comm: ksoftirqd/1 Tainted: G O 3.18.0-rc4-mjo #5 Hardware name: Intel Corp. VALLEYVIEW B3 PLATFORM/NOTEBOOK, BIOS MNW2CRB1.X64.0071.R30.1408131301 08/13/2014 task: ffff880077f9f290 ti: ffff88007a820000 task.ti: ffff88007a820000 RIP: 0010:[<ffffffffa0022bc8>] [<ffffffffa0022bc8>] cs_deassert+0x18/0x70 [spi_pxa2xx_platform] RSP: 0018:ffff88007a823d08 EFLAGS: 00010202 RAX: 0000000000000008 RBX: ffff8800379a4430 RCX: 0000000000000026 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff8800379a4430 RBP: ffff88007a823d18 R08: 00000000ffffffff R09: 000000007a9bc65a R10: 000000000000028f R11: 0000000000000005 R12: ffff880070123e98 R13: ffff880070123de8 R14: 0000000000000100 R15: ffffc90004888000 FS: 0000000000000000(0000) GS:ffff880079a80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000048 CR3: 000000007029b000 CR4: 00000000001007e0 Stack: ffff88007a823d58 ffff8800379a4430 ffff88007a823d48 ffffffffa0022c89 0000000000000000 ffff8800379a4430 0000000000000000 0000000000000006 ffff88007a823da8 ffffffffa0023be0 ffff88007a823dd8 ffffffff81076204 Call Trace: [<ffffffffa0022c89>] giveback+0x69/0xa0 [spi_pxa2xx_platform] [<ffffffffa0023be0>] pump_transfers+0x710/0x740 [spi_pxa2xx_platform] [<ffffffff81076204>] ? pick_next_task_fair+0x744/0x830 [<ffffffff81049679>] tasklet_action+0xa9/0xe0 [<ffffffff81049a0e>] __do_softirq+0xee/0x280 [<ffffffff81049bc0>] run_ksoftirqd+0x20/0x40 [<ffffffff810646df>] smpboot_thread_fn+0xff/0x1b0 [<ffffffff810645e0>] ? SyS_setgroups+0x150/0x150 [<ffffffff81060f9d>] kthread+0xcd/0xf0 [<ffffffff81060ed0>] ? kthread_create_on_node+0x180/0x180 [<ffffffff8187a82c>] ret_from_fork+0x7c/0xb0 Fix this by clearing drv_data->cur_chip before we call spi_finalize_current_message(). Reported-by:
Martin Oldfield <m@mjoldfield.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Michel Dänzer authored
commit 5636d2f8 upstream. The GART table BO has to be moved out of VRAM for suspend/resume. Any updates to the GART table during that time were silently dropped without this change. This caused GPU lockups on resume in some cases, see the bug reports referenced below. This might also make GPU reset more robust in some cases, as we no longer rely on the GART table in VRAM being preserved across the GPU lockup/reset. v2: Add logic to radeon_gart_table_vram_pin directly instead of reinstating radeon_gart_restore v3: Move code after assignment of rdev->gart.table_addr so that the GART TLB flush can work as intended, add code comment explaining why we're doing this Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85204 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86267Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
