- 05 Jul, 2016 8 commits
-
-
Dan Carpenter authored
"max_amsdu_len" isn't set if kstrtouint() fails. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Dan Carpenter authored
We never initialize ampdu_status so it causes a static checker warning when we pass it to iwl_mvm_pass_packet_to_mac80211(). Fortunately, it's never used so we can just remove it. Signed-off-by:
-
Luca Coelho authored
Some transports may sleep when writing to registers, which is done when calling iwl_force_nmi(). So we can't call iwl_force_nmi() in a timer context. To solve that, convert the scan timeout timer to a delayed work. Signed-off-by: -
Sara Sharon authored
Theoretically we may get only one IRQ from OS, in which case we will have only 1 queue even in MSIx mode. This will cause division by zero in the indirection table calculation. We do not need send the command in that case, as there is only one queue so all RX traffic will be directed to it anyway. Bail out early if there is only one queue. Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Signed-off-by:
-
Sara Sharon authored
Currently code calls restock for mq devices during the init function, unlike sq where restock is called after init. This causes an harmless but alarming deadlock warning from lockdep, to fix this - unify the init code. Rename the restock functions while at it. Signed-off-by:
-
Liad Kaufman authored
Support marking queues as inactive upon a timeout expiring, and allow inactive queues to be re-assigned to other RA/TIDs if no other queue is free. This is done by keeping a timestamp of the latest frame TXed for every RA/TID, and then going over the queues currently in use when a new queue is needed, inactivating all those that are inactive. Signed-off-by:
Liad Kaufman <liad.kaufman@intel.com> Signed-off-by:
-
Johannes Berg authored
Instead of explicitly indicating the difference between just DVM and MVM with an mvm_fw boolean change this to fw.type to be more extensible and easier to understand. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
Since the values of this enum are used only internally, we can let the compiler number them. Signed-off-by:
-
- 01 Jul, 2016 13 commits
-
-
Johannes Berg authored
For some reason, the FRAME_RELEASE message handling for the default queue ended up being in the only/default queue for non-RSS devices; fix that and handle FRAME_RELEASE properly on the default queue for RSS devices. Fixes: 585a6fcc ("iwlwifi: mvm: infrastructure for frame-release message") Signed-off-by:
-
Andrei Otcheretianski authored
Add support CSA countdown offloading. When CSA starts, the driver specifies the offsets to the eCSA and CSA IEs in the beacon template command and the fw performs the countdown. The fw notifies the driver when the channel switch flow should be performed. Beacon sent notifications are not used anymore. Signed-off-by:
Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by:
-
Sara Sharon authored
Add a warning in case packet didn't end up in the HW destined queue. Signed-off-by:
-
Sara Sharon authored
We now have 9000 devices that support multiple frames in a single RB. Enable it. Signed-off-by:
-
Sara Sharon authored
For 9000 devices we can have PCIe bus for discrete devices and IOSF bus for integrated devices. PCIe supports maximum transfer size of 128B while IOSF bus supports maximum transfer size of 64B. Configure RB size accordingly. Signed-off-by:
-
Sara Sharon authored
Integrated 9000 devices have a bug with shadow registers value retention. If driver writes RBD registers while MAC is asleep the values are stored in shadow registers to be copied whenever MAC wakes up. However, in 9000 devices a MAC wakeup is not triggered and when the bus powers down due to inactivity the shadow values and dirty bits are lost. Turn on the chicken-bits that cause MAC wakeup for RX-related values as well when the device is in D0. When the device is in low power mode turn the RX wakeup chicken bits off since driver is idle and this W/A is not needed. Remove previous W/A which was ineffective. Signed-off-by:
-
Liad Kaufman authored
Support queue removal in DQA mode in iwl_mvm_rm_sta() also when the device isn't a STA connected to an AP. Signed-off-by:
-
Sara Sharon authored
rx_phy notification is no longer sent in devices with multiple rx queues. All the needed data is now set in the metadata - update code accordingly to reflect all the features as in the previous RX path. Signed-off-by:
-
Sara Sharon authored
In multiple RX queues architecture, the RX_PHY notification is no longer useful as it is received in the default queue even for packets that are received on RSS queue, and cannot be accessed without locking. All the needed data is in the new RX packet metadata and firmware will no longer send this notification for 9000 devices. Remove support of it. Signed-off-by:
-
Avraham Stern authored
Ucode capability bit 26 indicates support for UAPSD on P2P interface even with a simultaneous BSS station interface, as long as both interfaces are in the same binding. Change the name of the capability bit to reflect that. Signed-off-by:
Avraham Stern <avraham.stern@intel.com> Signed-off-by:
-
Johannes Berg authored
Somehow we ended up without leading spaces here, fix that. Signed-off-by:
-
Sara Sharon authored
We cannot trust NSSN for AMSDU sub-frames that are not the last. The reason is that NSSN advances on the first sub-frame, and may cause the reorder buffer to advance before all the sub-frames arrive. Example: Reorder buffer contains SN 0 & 2. We receive AMSDU with SN 1 and NSSN for first sub frame 3. The result us that driver releases SN 0,1, 2. When sub-frame 1 arrives - reorder buffer is already ahead and it will be dropped. If the last sub-frame is not on this queue - we will get frame release notification with up to date NSSN. Signed-off-by:
-
Emmanuel Grumbach authored
The new hardware that supports multiple queue also de-aggregates A-MSDUs. This means that we can advertise the maximal size of A-MSDUs regardless of the receive buffer's size. In order to be able to forcefully use a lower A-MSDU size, add a default value for the module parameter. Pre-9000 will have a default of 4K, and 9000 will have 12K. Setting the amsdu_size module parameter to 4K will limit the A-MSDU on 9000 as well. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
- 10 May, 2016 19 commits
-
-
Luca Coelho authored
I'm starting to take a more active role in the iwlwifi driver maintainership. Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: -
Emmanuel Grumbach authored
Small change to make it clear that the default value is false. Signed-off-by:
-
Sara Sharon authored
When initializing RX we grab NIC access for every read and write. This is redundant - we can just grab access once. Signed-off-by:
-
Sara Sharon authored
The RX queues have a shadow register for the write pointer that enables updates without grabbing NIC access. Use them instead of the periphery registers because accessing those is much more expensive. Signed-off-by:
-
Liad Kaufman authored
In non-shared queues, DQA requires re-configuring existing queues to become aggregated rather than allocating a new one. It also requires "un-aggregating" an existing queue when aggregations are turned off. Support this requirement for non-shared queues. Signed-off-by:
-
Johannes Berg authored
Since msleep is based on jiffies, it can sleep for a long time. Use usleep_range() instead to shorten the maximum time. Signed-off-by:
-
Johannes Berg authored
Newer hardware generations will take longer to be accessible again after reset, so we need to wait longer before continuing any flow that did a reset. Rather than make the wait time configurable, simply extend it for all. Since all of these code paths can sleep, use usleep_range() rather than mdelay(). Signed-off-by:
-
Gregory Greenman authored
Devices supporting VHT 160MHz width are supporting also Short GI. Turn on this capability in vht cap. Signed-off-by:
Gregory Greenman <gregory.greenman@intel.com> Signed-off-by:
-
Johannes Berg authored
Since we have a lot of configuration structs (almost 70) saving some memory in each one of them leads to an overall saving of ~2.6KiB of memory. Signed-off-by:
-
Emmanuel Grumbach authored
The commit below added code to dump the content of FIFOs that are present only on dual CPU products (8000 and up). This broke 7265D whose firmware does advertise IWL_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG but doesn't have 2 CPUs. The current code does check the length of the FIFO before dumping them (and the nonexistent FIFO has a 0 length), but we still accessed a register to set the FIFO number and that made the DMA unhappy. The impact was a much longer recovery upon firmware assert. Fixes: 5b086414 ("iwlwifi: mvm: support dumping UMAC internal txfifos") Signed-off-by:
-
Emmanuel Grumbach authored
This Kconfig option allows to load a firmware for debugging with a different name. This mechanism has not been used for a few years now and replacing the firmware file works as well. Kill this Kconfig option and all the code that goes with it. Signed-off-by:
-
Sara Sharon authored
Getting the mvm station out of station id requires dereferencing the station id to get ieee80211_sta, then checking for pointer validity and only then extract mvm station out. Given that there are helpers to do it - use them instead of duplicating the code whenever we need only mvm station. Signed-off-by:
-
Sara Sharon authored
iwl_phy_db_set_section() is get called only from atomic context, the alloc_ctx parameter is not needed. Remove it. Signed-off-by:
-
Sara Sharon authored
Driver is agnostic to the number of the phy_db entries and only serves the firmware as a pipe to move the data from init image to RT image. As the size of the arrays may change (as it does in 9000 device) allocate it dynamically. Firmware sends the largest index first so we can use this to know how much we should allocate. Signed-off-by:
-
Sara Sharon authored
Our device supports only 160 GHz and not 80+80. Fix VHT flag accordingly. Signed-off-by:
-
Sara Sharon authored
Up till now, the reorder buffer uses standard spec based comparison when comparing the buffer status to NSSN. This indeed works for the regular case, since we shouldn't cross the 2048 boundary without getting a frame release notification. However, this is problematic due to packet filtering that may be performed by the FW while we are in d0i3. Theoretically we may filter over 2048 packets, and then the check of the NSSN will get incorrect. Change the comparison to always trust nssn unless it is 64 or less frames behind the head - which might happen due to a timeout. This new comparison is to be used only when comparing reorder buffer head with nssn, and not when comparing the packet SN to nssn or reorder buffer head. Put this in a separate commit as the logic is a bit tricky and stands for its own commit message. Signed-off-by:
-
Haim Dreyfuss authored
CSR registers are always available even when the NIC is not awake, no need to wake up the NIC before accessing them. This has a huge impact when we re-enable an interrupt at the end of the ISR since waking up the NIC can take some time. Signed-off-by:
Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by:
-
Haim Dreyfuss authored
Previous patch had changed firmware name convention for new generation product. The firmware name is now longer than the former convention. Adapt max firmware name length to the new convention. Fixes: e1ba684f ("iwlwifi: 8000: fix MODULE_FIRMWARE input") Signed-off-by:
-
Sara Sharon authored
Currently code allows mvm reference to become negative and only warns in case mvm reference is released while reference counting is 0. However, we better prevent this from happening at all since iwl_mvm_unref() may race against iwl_mvm_unref_all_except() which is called on restart. As a result we might get the same reference unreferenced twice ending with a negative value: An example for an easily reproduced log: [ 2689.909166] iwl_mvm_ref Take mvm reference - type 8 [ 2690.732716] iwl_mvm_unref_all_except Cleanup: remove mvm ref type 8 (1) [ 2690.849708] iwl_mvm_unref Leave mvm reference - type 8 [ 2690.849721] WARNING: ... iwl_mvm_unref+0xb0/0xc0 [iwlmvm]() If there will be yet another another restart iwl_mvm_unref_all_except will run from 0 up to ref count, and since it is unsigned, we will throw the transport ref count completely out of balance: iwl_mvm_unref_all_except[I] -- Cleanup: remove mvm ref type 8 (255) iwl_trans_slv_unref[I] -- rpm counter: 0 iwl_trans_slv_unref[I] -- rpm counter: -1 iwl_trans_slv_unref[I] -- rpm counter: -2 ... iwl_trans_slv_unref[I] -- rpm counter: -253 iwl_trans_slv_unref[I] -- rpm counter: -254 As there is no valid scenario where we can get to a negative reference count - prevent it from happening. Signed-off-by:
-
