- 06 May, 2013 40 commits
-
-
Josef Bacik authored
This is just obnoxious. Just print a message, abort the transaction, and return an error. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Josef Bacik authored
We can run the tree logging recovery or the orphan cleanup on mount, so we'll end up looking up a random fs tree in the meantime. So we need to clean this up so we don't leave extent buffers hanging around on the cache. With this patch we no longer leak extent buffers on failure to mount. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Josef Bacik authored
This is the same as the fix from commit Btrfs: fix bad extent logging but for O_DIRECT. I missed this when I fixed the problem originally, we were still using the em for the orig_start and orig_block_len, which would be the merged extent. We need to use the actual extent from the on disk file extent item, which we have to lookup to make sure it's ok to nocow anyway so just pass in some pointers to hold this info. Thanks, Cc: stable@vger.kernel.org Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Josef Bacik authored
We kept leaking extent buffers when mounting a broken file system and it turns out it's because not everybody uses read_tree_block properly. You need to check and make sure the extent_buffer is uptodate before you use it. This patch fixes everybody who calls read_tree_block directly to make sure they check that it is uptodate and free it and return an error if it is not. With this we no longer leak EB's when things go horribly wrong. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Josef Bacik authored
If we fail to load block groups halfway through we can leave extent_state's on the excluded tree. This is because we just lookup the supers and add them to the excluded tree regardless of which block group we are looking at currently. This is a problem because we remove the excluded extents for the range of the block group only, so if we don't ever load a block group for one of the excluded extents we won't ever free it. This fixes the problem by only adding excluded extents if it falls in the block group range we care about. With this patch we're no longer leaking space when we fail to read all of the block groups. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Josef Bacik authored
With a users corrupted fs I was getting weird behavior and panics and it turns out it was because one of his tree blocks had a bogus header level. So add this to the sanity checks in the endio handler for tree blocks. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Josef Bacik authored
This work is done by btrfs_free_path() anyway so there's no need for this duplicate work. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Josef Bacik authored
A user sent me a btrfs-image that was panicing because of some corruption. This is because we pass in a bogus value to btrfs_num_copies, and it panics. Instead just return 1. We only call btrfs_num_copies to see if there are other copies to try and read for things, so if we just return 1 it will make the callers exit out with an appropriate error value. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Josef Bacik authored
Martin Steigerwald reported a BUG_ON() where we were given a bogus bytenr to map. Turns out he is using > PAGESIZE leafsizes. The readahead stuff is called every time we do a completion, but we may not have finished reading in all the pages, so the bytenr we read off the node could be completely bogus. Fix this by only calling the readahead hook once all pages have been read in. Thanks, Reported-by: Martin Steigerwald <Martin@lichtvoll.de> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Josef Bacik authored
Martin Steigerwald reported a BUG_ON() in btrfs_map_block where we didn't find a chunk for a particular block we were trying to map. This happened because the block was bogus. We shouldn't be BUG_ON()'ing in this case, just print a message and return an error. This came from reada_add_block and it appears to deal with an error fine so we should be good there. Thanks, Reported-by: Martin Steigerwald <Martin@lichtvoll.de> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Josef Bacik authored
We need to tag metadata io with REQ_META to avoid priority inversion when using io throttling cqroups. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Josef Bacik authored
So I noticed there is an infinite loop in the slow caching code. If we return 1 when we hit the end of the tree, so we could end up caching the last block group the slow way and suddenly we're looping forever because we just keep re-searching and trying again. Fix this by only doing btrfs_next_leaf() if we don't need_resched(). Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Josef Bacik authored
The locking order for stuff is __sb_start_write ordered_mutex but with sync() we don't do __sb_start_write for some strange reason, which means that our iput in wait_ordered_extents could start a transaction which does the __sb_start_write while we're holding the ordered_mutex. Fix this by using delayed iput in sync. Thanks, Reported-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Wang Shilong authored
Since all the quota configurations are loaded in memory, and we can have ioctl checks before operating in the disk. It is safe to do such things because qgroup_ioctl_lock is held outside. Without these extra checks firstly, it should be ok to do user change for quota operations. For example: if we want to add an existed qgroup, we will do: ->add_qgroup_item() ->add_qgroup_rb() add_qgroup_item() will return -EEXIST to us, however, qgroups are all in memory, why not check them in memory firstly. Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Wang Shilong authored
ulist_add() may return -ENOMEM, fix missing check about return value. Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Stefan Behrens authored
For created snapshots, the full root_item is copied from the source root and afterwards selectively modified. The current code forgets to clear the field received_uuid. The only problem is that it is confusing when you look at it with 'btrfs subv list', since for writable snapshots, the contents of the snapshot can be completely unrelated to the previously received snapshot. The receiver ignores such snapshots anyway because he also checks the field stransid in the root_item and that value used to be reset to zero for all created snapshots. This commit changes two things: - clear the received_uuid field for new writable snapshots. - don't clear the send/receive related information like the stransid for read-only snapshots (which makes them useable as a parent for the automatic selection of parents in the receive code). Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Josef Bacik authored
Dave reported a BUG_ON() that happened in end_page_writeback() after an abort. This happened because we unconditionally call end_page_writeback() in the endio case, which is right. However when we abort the transaction we will call end_page_writeback() on any writeback pages we find, which is wrong. We need to lock the page and wait on page writeback to complete if it is. There is nothing unsafe about this since we are discarding the transaction anyway. Thanks, Reported-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Wang Shilong authored
Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Liu Bo authored
We need such a sanity check for wrong start when we defrag a file, otherwise, even with a wrong start that's larger than file size, we can end up changing not only inode's force compress flag but also FS's incompat flags. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Vincent authored
This fixes the following errors: fs/btrfs/reada.c: In function ‘btrfs_reada_wait’: fs/btrfs/reada.c:958:42: error: invalid operands to binary < (have ‘atomic_t’ and ‘int’) fs/btrfs/reada.c:961:41: error: invalid operands to binary < (have ‘atomic_t’ and ‘int’) Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Chris Mason <chris.mason@fusionio.com> Cc: linux-btrfs@vger.kernel.org Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Tsutomu Itoh authored
Argument 'trans' became unnecessary from setup_inline_extent_backref() that called btrfs_extend_item(). Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Tsutomu Itoh authored
Argument 'trans' is not used in btrfs_extend_item(). Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Tsutomu Itoh authored
If argument 'trans' is unnecessary in the function where fixup_low_keys() is called, 'trans' is deleted. Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Tsutomu Itoh authored
Argument 'trans' is not used in fixup_low_keys(). So, remove it. Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Wang Shilong authored
Step to reproduce: mkfs.btrfs <disk> mount <disk> <mnt> dd if=/dev/zero of=/<mnt>/data bs=1M count=10 sync btrfs quota enable <mnt> btrfs qgroup create 0/5 <mnt> btrfs qgroup limit 5M 0/5 <mnt> rm -f /<mnt>/data sync btrfs qgroup show <mnt> dd if=/dev/zero of=data bs=1M count=1 >From the perspective of users, qgroup's referenced or exclusive is negative,but user can not continue to write data! a workaround way is to cast u64 to s64 when doing qgroup reservation. Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Reviewed-by: Arne Jansen <sensille@gmx.net> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Wang Shilong authored
If out of memory happens, we should return -ENOMEM directly to the caller rather than continue the work. Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Nathaniel Yazdani authored
In the comment describing the sync_writers field of the btrfs_inode struct, "fsyncing" was misspelled "fsycing." Signed-off-by: Nathaniel Yazdani <n1ght.4nd.d4y@gmail.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Wang Shilong authored
Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Jan Schmidt authored
When tree_mod_log_rewind decides to make a copy of the current tree buffer for its modifications, it subsequently freed the buffer before unlocking it. Obviously, those operations are required in reverse order. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Jan Schmidt authored
The tree mod log functions were accessing root->node->... directly, without use of btrfs_root_node() or explicit rcu locking. This could lead to an extent buffer reference being leaked and another reference being freed too early when preemtion was enabled. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Jan Schmidt authored
Commit d9abbf1c changed tree mod log locking around ROOT_REPLACE operations. When a tree root is split, however, we were logging removal of all elements from the root node before logging removal of half of the elements for the split operation. This leads to a BUG_ON when rewinding. This commit removes the erroneous logging of removal of all elements. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Miao Xie authored
The following case will make the incompat/compat flag of the super block be recovered. Task1 |Task2 flags = btrfs_super_incompat_flags(); | |flags = btrfs_super_incompat_flags(); flags |= new_flag1; | |flags |= new_flag2; btrfs_set_super_incompat_flags(flags); | |btrfs_set_super_incompat_flags(flags); the new_flag1 is recovered. In order to avoid this problem, we introduce a lock named super_lock into the btrfs_fs_info structure. If we want to update incompat/compat flags of the super block, we must hold it. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Miao Xie authored
The new mount option is set after parsing the remount arguments, so it is wrong that checking the autodefrag is close or not at btrfs_remount_prepare(). Fix it. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Wang Shilong authored
Walking backref tree and btrfs quota rely on ulist very much. This patch tries to use rb_tree to speed up search time. The original code always checks whether an element exists before adding a new element, however it costs O(n). I try to add a rb_tree in the ulist,this is only used to speed up search. I also do some measurements with quota enabled. fsstress -p 4 -n 10000 Without this path: real 0m51.058s 2m4.745s 1m28.222s 1m5.137s user 0m0.035s 0m0.041s 0m0.105s 0m0.100s sys 0m12.009s 0m11.246s 0m10.901s 0m10.999s 0m11.287s With this path: real 0m55.295s 0m50.960s 1m2.214s 0m48.273s user 0m0.053s 0m0.095s 0m0.135s 0m0.107s sys 0m7.766s 0m6.013s 0m6.319s 0m6.030s 0m6.532s After applying the patch,the execute time is down by ~42%.(11.287s->6.532s) Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Reviewed-by: Miao Xie <miaox@cn.fujitsu.com> Reviewed-by: Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Stefan Behrens authored
Two new flags are added to allow omitting the stream header and the end command for btrfs send streams. This is used in cases where you send multiple snapshots back-to-back in one stream. This used to be encoded like this (with 2 snapshots in this example): <stream header> + <sequence of commands> + <end cmd> + <stream header> + <sequence of commands> + <end cmd> + EOF The new format (if the two new flags are used) is this one: <stream header> + <sequence of commands> + <sequence of commands> + <end cmd> Note that the currently existing receivers treat <end cmd> only as an indication that a new <stream header> is following. This means, you can just skip the sequence <end cmd> <stream header> without loosing compatibility. As long as an EOF is following, the currently existing receivers handle the new format (if the two new flags are used) exactly as the old one. So what is the benefit of this change? The goal is to be able to use a single stream (one TCP connection) to multiplex a request/response handshake plus Btrfs send streams, all in the same stream. In this case you cannot evaluate an EOF condition as an end of the Btrfs send stream. You need something else, and the <end cmd> is just perfect for this purpose. The summary is: The format change is driven by the need to send several Btrfs send streams over a single TCP connections, with the ability for a repeated request/response handshake in the middle. And this format change does not break any existing tool, it is completely compatible. You could compare the old behaviour of the Btrfs send stream to the one of ftp where you need a seperate request/response channel and newly opened data transfer channels for each file, while the new behaviour is more like http using a single stream for everything. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Wang Shilong authored
__merge_refs() always return 0, it is unnecessary for the caller to check the return value. Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Wang Shilong authored
The only error return value of __add_prelim_ref() is -ENOMEM, just return errors rather than trigger BUG_ON(). Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Wang Shilong authored
Steps to reproduce: mkfs.btrfs <disk> mount <disk> <mnt> btrfs quota enable <mnt> btrfs sub create <mnt>/subv btrfs qgroup limit 10K <mnt>/subv btrfs quota disable <mnt>/subv It is wrong for qgroup to reserve when disabling quota, so just use tree_root to avoid edquot when disabling quota. Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Wang Shilong authored
Step to reproduce: mkfs.btrfs <disk> mount <disk> <mnt> btrfs quota enable <mnt> btrfs qgroup limit 0/1 <mnt> dmesg If the relative qgroup dosen't exist, flag 'BTRFS_QGROUP_STATUS_ FLAG_INCONSISTENT' will be set, and print the noise message. This is wrong, we can just move find_qgroup_rb() before update_qgroup_limit_item().this dosen't change the logic of the function. But it can avoid unnecessary noise message and wrong set of flag. Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Wang Shilong authored
The original code forgot to check 'inherit', we should gurantee that all the qgroups in the struct 'inherit' exist. Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Reviewed-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-