`max77857_remgap_config` is not modified and can be declared as const to
move its data to a read-only section.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20240704-regulator-const-regmap-v1-2-bce0ddef63ea@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

`da9121_1ch_regmap_config` and `da9121_2ch_regmap_config` are not
modified and can be declared as const to move their data to a
read-only section.

The pointer that references those structs has been converted to const
accordingly.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20240704-regulator-const-regmap-v1-1-bce0ddef63ea@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

TPS65132 is powered by its VIN supply, document it.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/ZoWxnEY944ht2EWf@standask-GA-A55M-S2HPSigned-off-by: Mark Brown <broonie@kernel.org>

Fix example to also conform to rules specified in the separate
not-included gpadc binding.

Fixes: 62e4f339 ("dt-bindings: regulator: twl-regulator: convert to yaml")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reported-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240612134039.1089839-1-andreas@kemnade.infoSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Biju Das <biju.das.jz@bp.renesas.com>:

As per RZ/G2L HW manual, VBUS enable can be controlled by the VBOUT bit of
the VBUS Control Register(VBENCTL) register in the USBPHY Control. But
this IP is in the Reset block.

Reset driver exposes this register as regmap and instantiate the USB VBUS
regulator device. Consumers(phy device) can use regulator APIs to control
VBUS as controlling is done in the atomic context using a new API which
is added for the purpose.

As per the RZ/G2L HW manual, VBUSEN can be controlled by the VBOUT
bit of the VBUS Control Register. This register is mapped in the reset
framework. The reset driver expose this register as regmap and instantiates
this driver. The consumer will use the regulator API to control the VBOUT
bit as the control need to be done in the atomic context.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20240616105402.45211-5-biju.das.jz@bp.renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add a helper function that allow regulator consumers to allow low-level
HW access, in order to enable/disable regulator in atomic context.

The use-case for RZ/G2L SoC is to enable VBUS selection register based
on vbus detection that happens in interrupt context.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20240616105402.45211-4-biju.das.jz@bp.renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

The Dynamic Voltage and Frequency Scaling Resource Collector Regulators
are controlled with votes to the DVFSRC hardware.

This adds support for the regulators found in MT6873, MT8183, MT8192
and MT8195 SoCs.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20240610085735.147134-2-angelogioacchino.delregno@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

The previous driver never worked, and never got even compiled because
it was missing the DVFSRC driver entirely, including needed neaders.

This is a full (or nearly full) refactoring of the MediaTek DVFSRC
controlled Regulators driver, retaining support for the MT6873, MT8183
and MT8192 SoC, and adding MT8195.

As part of the refactoring, this driver is now probed using its own
devicetree compatible, as this is a child of the main DVFSRC driver
and gets probed as a subnode of that.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20240610085735.147134-7-angelogioacchino.delregno@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

This driver never worked, and never got even compiled, because it was
missing the DVFSRC driver entirely, including headers it relies on!

In preparation of a full refactoring of this driver, remove it.

The Makefile and Kconfig entries are retained, as those are reused
as-is for the refactored code.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20240610085735.147134-6-angelogioacchino.delregno@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

Trying to use userspace-consumer when the required supplies have not yet
been probed will throw an error message on deferral:
reg-userspace-consumer output-led-power: Failed to get supplies: -517

So, lets simply use dev_err_probe() instead of dev_err() to not print
errors in case when driver probe is being deferred.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Link: https://patch.msgid.link/20240623140947.1252376-1-robimarko@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Pull i2c fixes from Wolfram Sang:
 "The core gains placeholders for recently added functions when
  CONFIG_I2C is not defined as well documentation fixes to start using
  inclusive terminology.

  The drivers get paths in DT bindings fixed as well as proper interrupt
  handling for the ocores driver"

* tag 'i2c-for-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  docs: i2c: summary: be clearer with 'controller/target' and 'adapter/client' pairs
  docs: i2c: summary: document 'local' and 'remote' targets
  docs: i2c: summary: document use of inclusive language
  docs: i2c: summary: update speed mode description
  docs: i2c: summary: update I2C specification link
  docs: i2c: summary: start sentences consistently.
  i2c: Add nop fwnode operations
  i2c: ocores: set IACK bit after core is enabled
  dt-bindings: i2c: google,cros-ec-i2c-tunnel: correct path to i2c-controller schema
  dt-bindings: i2c: atmel,at91sam: correct path to i2c-controller schema

Pull smb client fixes from Steve French:
 "Five smb3 client fixes

   - three nets/fiolios cifs fixes

   - fix typo in module parameters description

   - fix incorrect swap warning"

* tag '6.10-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Move the 'pid' from the subreq to the req
  cifs: Only pick a channel once per read request
  cifs: Defer read completion
  cifs: fix typo in module parameter enable_gcm_256
  cifs: drop the incorrect assertion in cifs_swap_rw()

Pull memblock fix from Mike Rapoport:
 "Fix fragility in checks for unset node ID.

  Use numa_valid_node() function to verify that nid is a valid node
  ID instead of inconsistent comparisons with either NUMA_NO_NODE or
  MAX_NUMNODES"

* tag 'fixes-2024-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock: use numa_valid_node() helper to check for invalid node ID

Pull MIPS fixes from Thomas Bogendoerfer:

 - fix lseek in o32 compat mode

 - fix for microMIPS MT ASE helpers

* tag 'mips-fixes_6.10_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  mips: fix compat_sys_lseek syscall
  MIPS: mipsmtregs: Fix target register for MFTC0

Pull x86 fixes from Borislav Petkov:

 - An ARM-relevant fix to not free default RMIDs of a resource control
   group

 - A randconfig build fix for the VMware virtual GPU driver

* tag 'x86_urgent_for_v6.10_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/resctrl: Don't try to free nonexistent RMIDs
  drm/vmwgfx: Fix missing HYPERVISOR_GUEST dependency

Pull powerpc fixes from Michael Ellerman:

 - Prevent use-after-free in 64-bit KVM VFIO

 - Add generated Power8 crypto asm to .gitignore

Thanks to Al Viro and Nathan Lynch.

* tag 'powerpc-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  KVM: PPC: Book3S HV: Prevent UAF in kvm_spapr_tce_attach_iommu_group()
  powerpc/crypto: Add generated P8 asm to .gitignore

Merge tag 'i2c-host-fixes-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

This pull request fixes the paths of the dt-schema to their
complete locations for the ChromeOS EC tunnel driver and the
Atmel at91sam drivers.

Additionally, the OpenCores driver receives a fix for an issue
that dates back to version 2.6.18. Specifically, the interrupts
need to be acknowledged (clearing all pending interrupts) after
enabling the core.

There are fixes for kselftest with clang that really help my CI.

Pull rust fix from Miguel Ojeda:

 - Avoid unused import warning in 'rusttest'.

* tag 'rust-fixes-6.10' of https://github.com/Rust-for-Linux/linux:
  rust: avoid unused import warning in `rusttest`

Merge tag 'regulator-fix-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A few driver specific fixes for incorrect device descriptions, plus a
  fix for a missing symbol export which causes build failures for some
  newly added drivers in other trees"

* tag 'regulator-fix-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: axp20x: AXP717: fix LDO supply rails and off-by-ones
  regulator: bd71815: fix ramp values
  regulator: core: Fix modpost error "regulator_get_regmap" undefined
  regulator: tps6594-regulator: Fix the number of irqs for TPS65224 and TPS6594

Pull spi fixes from Mark Brown:
 "A number of fixes that have built up for SPI, a bunch of driver
  specific ones including an unfortunate revert of an optimisation for
  the i.MX driver which was causing issues with some configurations,
  plus a couple of core fixes for the rarely used octal mode and for a
  bad interaction between multi-CS support and target mode"

* tag 'spi-fix-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spi-imx: imx51: revert burst length calculation back to bits_per_word
  spi: Fix SPI slave probe failure
  spi: Fix OCTAL mode support
  spi: stm32: qspi: Clamp stm32_qspi_get_mode() output to CCR_BUSWIDTH_4
  spi: stm32: qspi: Fix dual flash mode sanity test in stm32_qspi_setup()
  spi: cs42l43: Drop cs35l56 SPI speed down to 11MHz
  spi: cs42l43: Correct SPI root clock speed

Pull nfsd fixes from Chuck Lever:

 - Fix crashes triggered by administrative operations on the server

* tag 'nfsd-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  NFSD: grab nfsd_mutex in nfsd_nl_rpc_status_get_dumpit()
  nfsd: fix oops when reading pool_stats before server is started

Pull xfs fix from Chandan Babu:

 - Fix assertion failure due to a race between unlink and cluster buffer
   instantiation.

* tag 'xfs-6.10-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix unlink vs cluster buffer instantiation race

Pull bcachefs fixes from Kent Overstreet:
 "Lots of (mostly boring) fixes for syzbot bugs and rare(r) CI bugs.

  The LRU_TIME_BITS fix was slightly more involved; we only have 48 bits
  for the LRU position (we would prefer 64), so wraparound is possible
  for the cached data LRUs on a filesystem that has done sufficient
  (petabytes) reads; this is now handled.

  One notable user reported bugfix, where we were forgetting to
  correctly set the bucket data type, which should have been
  BCH_DATA_need_gc_gens instead of BCH_DATA_free; this was causing us to
  go emergency read-only on a filesystem that had seen heavy enough use
  to see bucket gen wraparoud.

  We're now starting to fix simple (safe) errors without requiring user
  intervention - i.e. a small incremental step towards full self
  healing.

  This is currently limited to just certain allocation information
  counters, and the error is still logged in the superblock; see that
  patch for more information. ("bcachefs: Fix safe errors by default")"

* tag 'bcachefs-2024-06-22' of https://evilpiepirate.org/git/bcachefs: (22 commits)
  bcachefs: Move the ei_flags setting to after initialization
  bcachefs: Fix a UAF after write_super()
  bcachefs: Use bch2_print_string_as_lines for long err
  bcachefs: Fix I_NEW warning in race path in bch2_inode_insert()
  bcachefs: Replace bare EEXIST with private error codes
  bcachefs: Fix missing alloc_data_type_set()
  closures: Change BUG_ON() to WARN_ON()
  bcachefs: fix alignment of VMA for memory mapped files on THP
  bcachefs: Fix safe errors by default
  bcachefs: Fix bch2_trans_put()
  bcachefs: set_worker_desc() for delete_dead_snapshots
  bcachefs: Fix bch2_sb_downgrade_update()
  bcachefs: Handle cached data LRU wraparound
  bcachefs: Guard against overflowing LRU_TIME_BITS
  bcachefs: delete_dead_snapshots() doesn't need to go RW
  bcachefs: Fix early init error path in journal code
  bcachefs: Check for invalid btree IDs
  bcachefs: Fix btree ID bitmasks
  bcachefs: Fix shift overflow in read_one_super()
  bcachefs: Fix a locking bug in the do_discard_fast() path
  ...

Pull ata fix from Niklas Cassel:

 - We currently enable DIPM (device initiated power management) in the
   device (using a SET FEATURES call to the device), regardless if the
   HBA supports any LPM states or not. It seems counter intuitive, and
   potentially dangerous to enable a device side feature, when the HBA
   does not have the corresponding support. Thus, make sure that we do
   not enable DIPM if the HBA does not support any LPM states.

* tag 'ata-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
  ata: ahci: Do not enable LPM if no LPM states are supported by the HBA

Merge tag 'pwm/for-6.10-rc5-fixes-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux

Pull pwm fixes from Uwe Kleine-König:
 "Three fixes for the pwm-stm32 driver.

  The first patch prevents an integer wrap-around for small periods. In
  the second patch the calculation of the prescaler is fixed which
  resulted in values for the ARR register that don't fit into the
  corresponding register bit field. The last commit improves an error
  message that was wrongly copied from another error path"

* tag 'pwm/for-6.10-rc5-fixes-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
  pwm: stm32: Fix error message to not describe the previous error path
  pwm: stm32: Fix calculation of prescaler
  pwm: stm32: Refuse too small period requests

Pull SoC fixes from Arnd Bergmann:
 "There are seven oneline patches that each address a distinct problem
  on the NXP i.MX platform, mostly the popular i.MX8M variant.

  The only other two fixes are for error handling on the psci firmware
  driver and SD card support on the milkv duo riscv board"

* tag 'arm-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  firmware: psci: Fix return value from psci_system_suspend()
  riscv: dts: sophgo: disable write-protection for milkv duo
  arm64: dts: imx8qm-mek: fix gpio number for reg_usdhc2_vmmc
  arm64: dts: freescale: imx8mm-verdin: enable hysteresis on slow input pin
  arm64: dts: imx93-11x11-evk: Remove the 'no-sdio' property
  arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix BT shutdown GPIO
  arm: dts: imx53-qsb-hdmi: Disable panel instead of deleting node
  arm64: dts: imx8mp: Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM
  arm64: dts: freescale: imx8mm-verdin: Fix GPU speed

Merge tag 'loongarch-fixes-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Some hw breakpoint fixes, an objtool build warnging fix, and a trivial
  cleanup"

* tag 'loongarch-fixes-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: KVM: Remove an unneeded semicolon
  LoongArch: Fix multiple hardware watchpoint issues
  LoongArch: Trigger user-space watchpoints correctly
  LoongArch: Fix watchpoint setting error
  LoongArch: Only allow OBJTOOL & ORC unwinder if toolchain supports -mthin-add-sub

Pull kvm fixes from Paolo Bonzini:
 "ARM:

   - Fix dangling references to a redistributor region if the vgic was
     prematurely destroyed.

   - Properly mark FFA buffers as released, ensuring that both parties
     can make forward progress.

  x86:

   - Allow getting/setting MSRs for SEV-ES guests, if they're using the
     pre-6.9 KVM_SEV_ES_INIT API.

   - Always sync pending posted interrupts to the IRR prior to IOAPIC
     route updates, so that EOIs are intercepted properly if the old
     routing table requested that.

  Generic:

   - Avoid __fls(0)

   - Fix reference leak on hwpoisoned page

   - Fix a race in kvm_vcpu_on_spin() by ensuring loads and stores are
     atomic.

   - Fix bug in __kvm_handle_hva_range() where KVM calls a function
     pointer that was intended to be a marker only (nothing bad happens
     but kind of a mine and also technically undefined behavior)

   - Do not bother accounting allocations that are small and freed
     before getting back to userspace.

  Selftests:

   - Fix compilation for RISC-V.

   - Fix a "shift too big" goof in the KVM_SEV_INIT2 selftest.

   - Compute the max mappable gfn for KVM selftests on x86 using
     GuestMaxPhyAddr from KVM's supported CPUID (if it's available)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: SEV-ES: Fix svm_get_msr()/svm_set_msr() for KVM_SEV_ES_INIT guests
  KVM: Discard zero mask with function kvm_dirty_ring_reset
  virt: guest_memfd: fix reference leak on hwpoisoned page
  kvm: do not account temporary allocations to kmem
  MAINTAINERS: Drop Wanpeng Li as a Reviewer for KVM Paravirt support
  KVM: x86: Always sync PIR to IRR prior to scanning I/O APIC routes
  KVM: Stop processing *all* memslots when "null" mmu_notifier handler is found
  KVM: arm64: FFA: Release hyp rx buffer
  KVM: selftests: Fix RISC-V compilation
  KVM: arm64: Disassociate vcpus from redistributor region on teardown
  KVM: Fix a data race on last_boosted_vcpu in kvm_vcpu_on_spin()
  KVM: selftests: x86: Prioritize getting max_gfn from GuestPhysBits
  KVM: selftests: Fix shift of 32 bit unsigned int more than 32 bits

"Failed to lock the clock" is an appropriate error message for
clk_rate_exclusive_get() failing, but not for the clock running too
fast for the driver's calculations.

Adapt the error message accordingly.

Fixes: d44d6356 ("pwm: stm32: Fix for settings using period > UINT32_MAX")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/285182163211203fc823a65b180761f46e828dcb.1718979150.git.u.kleine-koenig@baylibre.comSigned-off-by: Uwe Kleine-König <ukleinek@kernel.org>

A small prescaler is beneficial, as this improves the resolution of the
duty_cycle configuration. However if the prescaler is too small, the
maximal possible period becomes considerably smaller than the requested
value.

One situation where this goes wrong is the following: With a parent
clock rate of 208877930 Hz and max_arr = 0xffff = 65535, a request for
period = 941243 ns currently results in PSC = 1. The value for ARR is
then calculated to

	ARR = 941243 * 208877930 / (1000000000 * 2) - 1 = 98301

This value is bigger than 65535 however and so doesn't fit into the
respective register field. In this particular case the PWM was
configured for a period of 313733.4806027616 ns (with ARR = 98301 &
0xffff). Even if ARR was configured to its maximal value, only period =
627495.6861167669 ns would be achievable.

Fix the calculation accordingly and adapt the comment to match the new
algorithm.

With the calculation fixed the above case results in PSC = 2 and so an
actual period of 941229.1667195285 ns.

Fixes: 8002fbee ("pwm: stm32: Calculate prescaler with a division instead of a loop")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/b4d96b79917617434a540df45f20cb5de4142f88.1718979150.git.u.kleine-koenig@baylibre.comSigned-off-by: Uwe Kleine-König <ukleinek@kernel.org>

This not only includes rewording, but also where to put which emphasis
on terms in this document.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Because Linux can be a target as well, add terminology to differentiate
between Linux being the target and Linux accessing targets.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

We now have the updated I2C specs and our own Code of Conduct, so we
have all we need to switch over to the inclusive terminology. Define
them here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Fastest I2C mode is 5 MHz. Update the docs and reword the paragraph
slightly.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Luckily, the specs are directly downloadable again, so update the link.
Also update its title to the original name "I²C".
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Change the first paragraphs to contain only one space after the end of
the previous sentence like in the rest of the document.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Pull SCSI fixes from James Bottomley:
 "Two fixes: one in the ufs driver fixing an obvious memory leak and the
  other (with a core flag based update) trying to prevent USB crashes by
  stopping the core from issuing a request for the I/O Hints mode page"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: usb: uas: Do not query the IO Advice Hints Grouping mode page for USB/UAS devices
  scsi: core: Introduce the BLIST_SKIP_IO_HINTS flag
  scsi: ufs: core: Free memory allocated for model before reinit