- 08 Dec, 2016 9 commits
-
-
Tyrel Datwyler authored
Add each vscsi host adatper to a new global list_head named ibmvscsi_head. There is no functional change. This is meant primarily as a convience for locating adapters from within the debugger or crash utility. [mkp: fixed typo] Signed-off-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Subhash Jadavani authored
ufs_qcom_print_hw_debug_reg_all() function is having a bug where it might incorrectly modify undesired bits in UFS_CFG1 register, this change fixes it. Reviewed-by:
Venkat Gopalakrishnan <venkatg@codeaurora.org> Signed-off-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
-
Subhash Jadavani authored
The maximum value PA_SaveConfigTime is 250 (10us) but this is not enough for some vendors. Gear switch from PWM to HS may fail even with this max. PA_SaveConfigTime. Gear switch can be issued by host controller as an error recovery and any software delay will not help on this case so we need to increase PA_SaveConfigTime to >32us as per vendor recommendation. This change adds a quirk to increase the PA_SaveConfigTime parameter. Reviewed-by:
-
Yaniv Gardi authored
In case UFS driver is probed before the phy driver does, the UFS driver should return a PROBE_DEFER code. Signed-off-by:
Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by:
-
Yaniv Gardi authored
The UFS HCI v2.1 includes a few additional registers. This change updates the HCI register, the UFS version register content and the Interrupt Status register. Signed-off-by:
-
Finn Thain authored
Automatically probe the board irq when no irq parameter is provided, to simulate PnP. The old default behaviour was to disable the irq. Update driver documentation accordingly and add some printk messages to make this behaviour visible. Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Tested-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
-
Finn Thain authored
When IRQ_AUTO is used, the interrupt for HP C2502 cards gets disabled. Fix this by programming the card for a suitable free irq. The code for the free irq search comes from ALSA. Also allow IRQ 9 to work (it aliases to IRQ 2 on the card), as per Ondrej Zary's patch. Suggested-by:
-
Ondrej Zary authored
Use standard probe_irq_on() and probe_irq_off() functions instead of own implementation. This prevents warning messages like this in the kernel log: genirq: Flags mismatch irq 1. 00000000 (NCR-probe) vs. 00000080 (i8042) Move the IRQ trigger code from NCR5380 to g_NCR5380 where it is used. Also clear interrupt flag before and after the probe. Signed-off-by:
-
Ondrej Zary authored
Write and read back mode register to check that a chip is really there. If no card is present, reads result in 0xff. Signed-off-by:
-
- 07 Dec, 2016 4 commits
-
-
Christoph Hellwig authored
And simplify the MSI-X logic in general - just request the two vectors directly instead of going through an indirection table. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Nilesh Javali <nilesh.javali@cavium.com> Signed-off-by:
-
John Garry authored
In the hip06 and hip07 SoCs, the interrupt lines from the SAS controllers are connected to mbigen hw module [1]. The mbigen module is probed with module_init, and, as such, is not guaranteed to probe before the SAS driver. So we need to support deferred probe. We check for probe deferral in the hw layer probe, so we not probe into the main layer and allocate shost, memories, etc., to later learn that we need to defer the probe. [1] ./Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt Signed-off-by:
John Garry <john.garry@huawei.com> Reviewed-by:
Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by:
-
Hannes Reinecke authored
[mkp: fixed bad indentation] Signed-off-by:
Hannes Reinecke <hare@suse.com> Acked-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
-
Xose Vazquez Perez authored
NetApp did confirm this is not required. Cc: Martin George <Martin.George@netapp.com> Cc: Robert Stankey <Robert.Stankey@netapp.com> Cc: Steven Schremmer <Steven.Schremmer@netapp.com> Cc: Sean Stewart <Sean.Stewart@netapp.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christophe Varoqui <christophe.varoqui@opensvc.com> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Cc: device-mapper development <dm-devel@redhat.com> Signed-off-by:
Xose Vazquez Perez <xose.vazquez@gmail.com> Reviewed-by:
Sean Stewart <sean.stewart@netapp.com> Signed-off-by:
-
- 05 Dec, 2016 6 commits
-
-
Pan Bian authored
Variable ret is reset in the loop, and its value will be 0 during the second and after repeat of the loop. If pci_alloc_consistent() returns a NULL pointer then, it will leaves with return value 0. 0 means no error, which is contrary to the fact. This patches fixes the bug, explicitly assigning "-ENOMEM" to return variable ret on the path that the call to pci_alloc_consistent() fails. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188951Signed-off-by:
Pan Bian <bianpan2016@163.com> Reviewed-by:
Jitendra Bhivare <Jitendra.bhivare@broadcom.com> Signed-off-by:
-
Pan Bian authored
Variable ret is reset in the loop, and its value will be 0 during the second and after repeat of the loop. If pci_alloc_consistent() returns a NULL pointer then, it will leaves with return value 0. 0 means no error, which is contrary to the fact. This patches fixes the bug, explicitly assigning "-ENOMEM" to return variable ret on the path that the call to pci_alloc_consistent() fails. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188941Signed-off-by:
-
Hannes Reinecke authored
Older SmartArray controllers (eg SmartArray 64xx) do not support the extended REPORT PHYS command, so fallback to use the legacy version here. Signed-off-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
-
Bart Van Assche authored
This patch avoids that sparse complains about RCU pointer dereferences. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Cc: Hannes Reinecke <hare@suse.de> Cc: tang.junhui <tang.junhui@zte.com.cn> Reviewed-by:
-
Rasmus Villemoes authored
Passing one instead of 8 or 16 arguments reduces the size of the generated code somewhat: add/remove: 2/3 grow/shrink: 1/4 up/down: 1772/-2137 (-365) There's one more candidate, unique_id_show, but that uses %02X, and I'm not sure it would be ok to start using lowercase there, so I've left it alone for now. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by:
-
Xiaofei Tan authored
This patch addresses 4 problems in the module probe/remove: - When hisi_sas_shost_alloc() fails after we alloc shost memory, we should free shost memory before the function returns. - When hisi_sas_probe() fails after we alloc the HBA memories, we should also free the HBA memories. - We should free shost memory at the end of hisi_sas_remove(). - sha->core.shost is set twice, so remove extra set. Signed-off-by:
Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by:
Quentin Lambert <lambert.quentin@gmail.com> Signed-off-by:
-
- 01 Dec, 2016 13 commits
-
-
Christoph Hellwig authored
Signed-off-by:
Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
LSIs must be ack'ed with an MMIO otherwise they remain asserted forever. This is controlled by the "clear_isr" flag. While we set that flag properly when deciding initially whether to use LSIs or MSIs, we fail to set it if we first chose MSIs, the test fails, then fallback to LSIs. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Dan Carpenter authored
We recently introduced a kfree() in the caller for this function. That's where, logically, you would think the kfree() should be. Unfortunately the code was just ugly and not buggy so the static checker warning was a false postive and introduced a double free. I've removed the old kfree() and left the new one. Fixes: 021e2927 ("scsi: dpt_i2o: Add a missing call to kfree") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Matthew R. Ochs authored
Currently, when sending a SCSI command, the pointer is stored in a reserved field of the AFU command descriptor for retrieval once the SCSI command has completed. In order to support new descriptor formats that make use of the reserved field, the pointer is migrated to outside the descriptor where it can still be found during completion processing. Signed-off-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Acked-by:
Uma Krishnan <ukrishn@linux.vnet.ibm.com> Signed-off-by:
-
Matthew R. Ochs authored
As staging for supporting hardware with a different queuing mechanism, move the send_cmd() and context_reset() routines to function pointers that are configured when the AFU is initialized. In addition, rename the existing routines to better reflect the queue model they support. Signed-off-by:
-
Matthew R. Ochs authored
The queuecommand routine is disorganized where it populates the private command and also contains some logic/statements that are not needed given that cxlflash devices do not (and likely never will) support scatter-gather. Restructure the code to remove the unnecessary logic and create an organized flow: handle state -> DMA map -> populate command -> send command Signed-off-by:
-
Matthew R. Ochs authored
The send_tmf() routine includes some copy/paste cruft that can be removed as well as the setting of an AFU command-specific while holding the tmf_slock. While not a bug, it is out of place and should be shifted down alongside the other command initialization statements for clarity. Signed-off-by:
-
Matthew R. Ochs authored
The original design of the cxlflash driver required AFU commands to convey state information across multiple threads. The IOASA "host use" byte was used to track if a command was done, errored, or timed out. A per-command spin lock was used to serialize access to this byte. As this is no longer required with the introduction of completions and various refactoring over time, the spin lock, state tracking, and associated code can be removed. To support the simplification, the wait_resp() routine is refactored to return a success or failure. Additionally, as the simplification to the AFU internal command routine, explicit assignments of AFU command fields to zero are removed as the memory is zeroed upon allocation. Signed-off-by:
-
Matthew R. Ochs authored
With the removal of the static private command pool, the ability to 'complete' outstanding commands was lost. While not an issue for the commands originating outside the driver, internal AFU commands are synchronous and therefore have a timeout associated with them. To avoid a stale memory access, the tear down sequence needs to ensure that there are not any active commands before proceeding. As these internal AFU commands are rare events, the simplest way to accomplish this is detecting the activity and waiting for it to timeout. Signed-off-by:
-
Matthew R. Ochs authored
Clean up and remove the remaining private command pool infrastructure that is no longer required. Signed-off-by:
-
Matthew R. Ochs authored
Instead of using a private pool of AFU commands, use cmd_size to prime the private pool of SCSI commands such that they are allocated with a size large enough to contain an aligned AFU command. Use scsi_cmd_priv() to derive the aligned/zeroed private command on queuecommand and TMF paths. Remove cmd_checkout() as it is no longer required. The remaining AFU private command infrastructure will be removed in a cleanup commit. Signed-off-by:
-
Matthew R. Ochs authored
As staging for the removal of the AFU command pool, remove the reliance upon the pool for the internal AFU sync command. Instead of obtaining an AFU command from the pool, dynamically allocate memory with the appropriate alignment requirements. Since the AFU sync service is only executed from the process environment, blocking is acceptable. Signed-off-by:
-
Matthew R. Ochs authored
The cxlflash driver originally required a per-command 4K buffer that hosted data passed to the AFU. When the routines that initiate AFU and internal SCSI commands were refactored to use scsi_execute(), the need for this buffer became obsolete. As it is no longer necessary, the buffer is removed. Signed-off-by:
-
- 30 Nov, 2016 7 commits
-
-
Souptick Joarder authored
In lpfc_new_scsi_buf_s3() and lpfc_new_scsi_buf_s4() pci_pool_alloc followed by memset will be replaced by pci_pool_zalloc() Signed-off-by:
Souptick joarder <jrdr.linux@gmail.com> Reviewed-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
-
Cathy Avery authored
On a 32 bit kernel sizeof(void *) is not 64 bits as hv_mpb_array requires. Also the buffer needs to be cleared or the upper bytes will contain junk. Suggested-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Cathy Avery <cavery@redhat.com> Reviewed-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Quentin Lambert authored
Most error branches following the call to dst_neigh_lookup contain a call to neigh_release. This patch add these calls where they are missing. This issue was found with Hector. Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
-
Uma Krishnan authored
During test, a command room violation interrupt is occasionally seen for the master context when the CXL flash devices are stressed. After studying the code, there could be gaps in the way command room value is being cached in cxlflash. When the cached command room is zero the thread attempting to send becomes burdened with updating the cached value with the actual value from the AFU. Today, this is handled with an atomic set operation of the raw value read. Following the atomic update, the thread proceeds to send. This behavior is incorrect on two counts: - The update fails to take into account the current thread and its consumption of one of the hardware commands. - The update does not take into account other threads also atomically updating. Per design, a worker thread updates the cached value when a send thread times out. By not protecting the update with a lock, the cached value can be incorrectly clobbered. To correct these issues, the update of the cached command room has been simplified and also protected using a spin lock which is held until the MMIO is complete. This ensures the command room is properly consumed by the same thread. Update of cached value also takes into account the current thread consuming a hardware command. Signed-off-by: -
Uma Krishnan authored
Currently, the context reset routine waits for command room to be available before sending the reset request. Per review of the SISLite specification and clarifications from the CXL Flash AFU designers, this wait is unnecessary. The reset request can be sent anytime regardless of command room, so long as only a single reset request is active at any one point in time. This commit simplifies the reset routine by removing the wait for command room. Additionally it adds a debug trace to help pinpoint hardware errors when a context reset does not complete. Signed-off-by:
-
Uma Krishnan authored
During test, the following crash was observed: [34538.981505] Faulting instruction address: 0xd000000007c9c870 cpu 0x9: Vector: 300 (Data Access) at [c0000007f1e8f590] pc: d000000007c9c870: cxlflash_restore_luntable+0x70/0x1d0 [cxlflash] lr: d000000007c9c84c: cxlflash_restore_luntable+0x4c/0x1d0 [cxlflash] sp: c0000007f1e8f810 msr: 9000000100009033 dar: c00000171d637438 dsisr: 40000000 current = 0xc0000007f1e43f90 paca = 0xc000000007b25100 softe: 0 irq_happened: 0x01 pid = 493, comm = eehd enter ? for help [c0000007f1e8f8a0] d000000007c940b0 init_afu+0xd60/0x1200 [cxlflash] [c0000007f1e8f9a0] d000000007c945a8 cxlflash_pci_slot_reset+0x58/0xe0 [cxlflash] [c0000007f1e8fa20] d00000000715f790 cxl_pci_slot_reset+0x230/0x340 [cxl] [c0000007f1e8fae0] c000000000040dd4 eeh_report_reset+0x144/0x180 [c0000007f1e8fb20] c00000000003f708 eeh_pe_dev_traverse+0x98/0x170 [c0000007f1e8fbb0] c000000000041618 eeh_handle_normal_event+0x328/0x410 [c0000007f1e8fc30] c000000000041db8 eeh_handle_event+0x178/0x330 [c0000007f1e8fce0] c000000000042118 eeh_event_handler+0x1a8/0x1b0 [c0000007f1e8fd80] c00000000011420c kthread+0xec/0x100 [c0000007f1e8fe30] c00000000000a47c ret_from_kernel_thread+0x5c/0xe0 When superpipe mode is disabled for a LUN, the references for the local lun are deleted but the LUN is still identified as being present in the LUN table. This mismatched state can result in the above crash when the LUN table is restored during an error recovery operation. To fix this issue, the local LUN information structure is updated to reflect the LUN is no longer in the LUN table once all references to the LUN are gone. Signed-off-by: -
Uma Krishnan authored
The following Oops is encountered when blk_mq is enabled with the cxlflash driver: [ 2960.817172] Oops: Kernel access of bad area, sig: 11 [#5] [ 2960.817309] NIP __blk_mq_run_hw_queue+0x278/0x4c0 [ 2960.817313] LR __blk_mq_run_hw_queue+0x2bc/0x4c0 [ 2960.817314] Call Trace: [ 2960.817320] __blk_mq_run_hw_queue+0x2bc/0x4c0 (unreliable) [ 2960.817324] blk_mq_run_hw_queue+0xd8/0x100 [ 2960.817329] blk_mq_insert_requests+0x14c/0x1f0 [ 2960.817333] blk_mq_flush_plug_list+0x150/0x190 [ 2960.817338] blk_flush_plug_list+0x11c/0x2b0 [ 2960.817344] blk_finish_plug+0x58/0x80 [ 2960.817348] __do_page_cache_readahead+0x1c0/0x2e0 [ 2960.817352] force_page_cache_readahead+0x68/0xd0 [ 2960.817356] generic_file_read_iter+0x43c/0x6a0 [ 2960.817359] blkdev_read_iter+0x68/0xa0 [ 2960.817361] __vfs_read+0x11c/0x180 [ 2960.817364] vfs_read+0xa4/0x1c0 [ 2960.817366] SyS_read+0x6c/0x110 [ 2960.817369] system_call+0x38/0xb4 The SCSI blk_mq stack assumes that sg_tablesize is always a non-zero value with scsi_mq_setup_tags() allocating tags using sg_tablesize. The cxlflash driver currently uses SG_NONE (0) for the sg_tablesize as the devices it supports are not capable of scatter gather. This mismatch of values results in the Oops above. To resolve this issue, sg_tablesize for cxlflash can simply be set to 1, a value which satisfies the constraints in cxlflash and the lack of support of SG_NONE in SCSI blk_mq. Signed-off-by:
-
- 29 Nov, 2016 1 commit
-
-
subhashj@codeaurora.org authored
We would by default like to run in FAST/SLOW mode instead of FASTAUTO/SLOWAUTO mode for performance reasons. This change sets the default speed mode to FAST/SLOW mode. Reviewed-by:
-
