- 29 Jul, 2009 6 commits
-
-
Zhenyu Wang authored
This adds embedded DisplayPort support on next mobile chip which aims to replace origin LVDS port. VBT's driver feature block has been used to determine the type of current internal panel for eDP or LVDS. Currently no panel fitting support for eDP and backlight control would be added in future. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
-
Zhenyu Wang authored
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
-
Zhenyu Wang authored
We should use current channel 'status' bits to clear DP aux channel's done and error bits, instead of using the channel setting bits, that will set send/busy bit again to initiate new transaction. This also includes also some minor cleanup. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
-
Zhenyu Wang authored
During pipe DPMS off, instead of busy waiting pipe off, insert delays during wait and don't loop after enough tries which matches spec requirement. Also try to match DPMS on path by disable FDI TX PLL in DPMS off. Disable PF by writing PF_WIN_SZ which really trigger the update. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
-
Zhenyu Wang authored
This does VGA disable like DDX driver. SR01 bit 5 should be set before VGA plane disable through control register, otherwise we might get random crash and lockups. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
-
Zhao Yakui authored
Now the DVO timing in LVDS data entry is obtained by using the following step: a. get the entry size for every LVDS panel data b. Get the LVDS fp entry for the preferred panel type c. get the DVO timing by using entry->dvo_timing In our driver the entry->dvo_timing is related with the size of lvds_fp_timing. For example: the size is 46. But it seems that the size of lvds_fp_timing varies on the differnt platform. In such case we will get the incorrect DVO timing entry because of the incorrect DVO offset in LVDS panel data entry. This also removes a hack on new IGDNG to get proper DVO timing. Calculate the DVO timing offset in LVDS data entry to get the DVO timing a. get the DVO timing offset in the LVDS fp data entry by using the pointer definition in LVDS data ptr b. get the LVDS data entry c. get the DVO timing by adding the DVO timing offset to data entry https://bugs.freedesktop.org/show_bug.cgi?id=22787Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Tested-by: Zhenyu Wang <zhenyuw@linux.intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
-
- 23 Jul, 2009 1 commit
-
-
ling.ma@intel.com authored
According to investigations from windows team ,hw team, and our test results on all 4x platofrms available (gm45, g45b, q45, g45a, g45c, g41a, and g41), we find currently Hot plug live status and Hot plug interrupt detection are not reliable, sometime the results from the two approaches are contradicts. So we chose edid detection for hdmi output. Signed-off-by: Ma Ling <ling.ma@intel.com> Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
-
- 16 Jul, 2009 2 commits
-
-
Jesse Barnes authored
If no planes are enabled, the self-refresh calculation may end up doing a divide by zero. This patch should prevent that by making sure at least one of the CRTCs had a valid hdisplay value. Reported-by: Eric Anholt <eric@anholt.net> Tested-by: Eric Anholt <eric@anholt.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
-
Jesse Barnes authored
If you're pushing a plane hard (i.e. you need most or all of the FIFO entries just to cover your frame refresh latency), the watermark level may end up being negative. So fix up the signed vs. unsigned math in the calculation function to handle this correctly, giving all available FIFO entries to such a configuration. Reported-by: Eric Anholt <eric@anholt.net> Tested-by: Eric Anholt <eric@anholt.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
-
- 14 Jul, 2009 1 commit
-
-
Jesse Barnes authored
I discovered several bugs in the FIFO code that was recently applied. Some of them fell into the "how did this ever work" category, since in some cases we were using the wrong FIFO size values, and the calculations ended up being way off. This patch fixes all the bugs I found, and works well on my GM45, 915GM and 855GM test machines; but as usual with these sorts of patches broader testing is definitely requested (in particular this patch affects 830, 845 and 865 for which I don't have test hardware). Overall, the patch clarifies the watermark calculation function by adding some comments and debug info, and making the variable names a bit clearer. The "get FIFO size" portion of the code has also been corrected, so we should be able to properly detect the FIFO allocations for each pipe, for use in the watermark calculation. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
-
- 13 Jul, 2009 4 commits
-
-
Tormod Volden authored
This motherboard thinks it has an LVDS connected, so without this patch the screen goes blank on the connected VGA monitor. More information (for the non-KMS case) in fd.o bug #18004. Signed-off-by: Tormod Volden <debian.tormod@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net>
-
Keith Packard authored
The 915 and 945 scanout engines can handle frame buffers up to 4096 pixels wide. Pre-9xx hardware has an 8192 byte stride limit, and so we leave the existing 2048 max in place. I'm not sure why we limit the height to the same value; there's no intrinsic hardware limit in the scanout engine. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net>
-
Jesse Barnes authored
This patch refactors the existing error detection and collection code, placing most of it in i915_handle_error(). Additionally, we introduce a work queue for scheduling post-crash tasks such as generating a uevent. Using the uevent facility, userspace should be able to capture a post-mortem dump for diagnostics. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ben Gamari <bgamari.foss@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net>
-
Florian Mickler authored
Vbios will set lvds register correctly based on current algorithm for lingle/dual Channel LVDS when system boot, so we can accept this configuration directly, regardless of LVDS enable status. It fixed freedesktop.org bug #22262 Signed-off-by: Florian Mickler <florian@mickler.org> Signed-off-by: Eric Anholt <eric@anholt.net>
-
- 12 Jul, 2009 5 commits
-
-
git://linux-arm.org/linux-2.6Linus Torvalds authored
* 'kmemleak' of git://linux-arm.org/linux-2.6: kmemleak: Remove alloc_bootmem annotations introduced in the past kmemleak: Add callbacks to the bootmem allocator kmemleak: Allow partial freeing of memory blocks kmemleak: Trace the kmalloc_large* functions in slub kmemleak: Scan objects allocated during a scanning episode kmemleak: Do not acquire scan_mutex in kmemleak_open() kmemleak: Remove the reported leaks number limitation kmemleak: Add more cond_resched() calls in the scanning thread kmemleak: Renice the scanning thread to +10
-
Artem Bityutskiy authored
Fix the following warning: fs/afs/dir.c: In function 'afs_d_revalidate': fs/afs/dir.c:567: warning: 'fid.vnode' may be used uninitialized in this function fs/afs/dir.c:567: warning: 'fid.unique' may be used uninitialized in this function by marking the 'fid' variable as an uninitialized_var. The problem is that gcc doesn't always manage to work out that fid is always set on the path through the function that uses it. Cc: linux-afs@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexey Dobriyan authored
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Julien Tinnes authored
We have found that the current PER_CLEAR_ON_SETID mask on Linux doesn't include neither ADDR_COMPAT_LAYOUT, nor MMAP_PAGE_ZERO. The current mask is READ_IMPLIES_EXEC|ADDR_NO_RANDOMIZE. We believe it is important to add MMAP_PAGE_ZERO, because by using this personality it is possible to have the first page mapped inside a process running as setuid root. This could be used in those scenarios: - Exploiting a NULL pointer dereference issue in a setuid root binary - Bypassing the mmap_min_addr restrictions of the Linux kernel: by running a setuid binary that would drop privileges before giving us control back (for instance by loading a user-supplied library), we could get the first page mapped in a process we control. By further using mremap and mprotect on this mapping, we can then completely bypass the mmap_min_addr restrictions. Less importantly, we believe ADDR_COMPAT_LAYOUT should also be added since on x86 32bits it will in practice disable most of the address space layout randomization (only the stack will remain randomized). Signed-off-by: Julien Tinnes <jt@cr0.org> Signed-off-by: Tavis Ormandy <taviso@sdf.lonestar.org> Cc: stable@kernel.org Acked-by: Christoph Hellwig <hch@infradead.org> Acked-by: Kees Cook <kees@ubuntu.com> Acked-by: Eugene Teo <eugene@redhat.com> [ Shortened lines and fixed whitespace as per Christophs' suggestion ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This causes kernel images that don't run init to completion with certain broken gcc versions. This fixes kernel bugzilla entry: http://bugzilla.kernel.org/show_bug.cgi?id=13012 I suspect the gcc problem is this: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=28230 Fix the problem by using the -fno-strict-overflow flag instead, which not only does not exist in the known-to-be-broken versions of gcc (it was introduced later than fwrapv), but seems to be much less disturbing to gcc too: the difference in the generated code by -fno-strict-overflow are smaller (compared to using neither flag) than when using -fwrapv. Reported-by: Barry K. Nathan <barryn@pobox.com> Pushed-by: Frans Pop <elendil@planet.nl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 11 Jul, 2009 19 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/stagingLinus Torvalds authored
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (abituguru3) DMI probing for AB9, AB9 QuadQT and IX38 QuadGT hwmon: (sht15) Remove unnecessary semicolon hwmon: (max6650) Fix lock imbalance
-
Linus Torvalds authored
This reverts commit 097041e5. Trond had a better fix, which is the parent of this one ("Fix compile error due to congestion_wait() changes") Requested-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Trond Myklebust authored
Move the definition of BLK_RW_ASYNC/BLK_RW_SYNC into linux/backing-dev.h so that it is available to all callers of set/clear_bdi_congested(). This replaces commit 097041e5 ("fuse: Fix build error"), which will be reverted. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alistair John Strachan authored
Switch the AB9, AB9 QuadQT and IX38 QuadGT over from port probing to the preferred DMI probe method. Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Tested-by: dan <dan@deeog.com> Tested-by: Nygel Lyndley <nygel.lyndley@gmail.com> Tested-by: Dmitriy Fedchenko <dmitriy-fedc@yandex.ru> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Joe Perches authored
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jiri Slaby authored
Add omitted update_lock to one switch/case in set_div. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - targa and targa-2ch fix ALSA: hda - fix beep tone calculation for IDT/STAC codecs ALSA: hda - Missing volume controls for Intel HDA (ALC269/EeePC) ALSA: hda - Disable AMD SB600 64bit address support only ALSA: hda - Check widget types while parsing capture source in patch_via.c ALSA: hda - Fix capture source selection in patch_via.c ALSA: hda - Add missing EAPD initialization for VIA codecs ALSA: hda - Clean up VT170x dig-in initialization code ALSA: hda - Fix error path in the sanity check in azx_pcm_open() ALSA: hda - move 8086:fb30 quirk (stac9205) to the proper section ASoC: Fix wm8753 register cache size and initialization ASoC: add locking to mpc5200-psc-ac97 driver ASoC: Fix mpc5200-psc-ac97 to ensure the data ready bit is cleared ASoC: Fix register cache initialisation for WM8753
-
Bartlomiej Zolnierkiewicz authored
commit 5404ac8e ("isofs: cleanup mount option processing") missed conversion of joliet option flag resulting in non-working Joliet support. CC: walt <w41ter@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alan Cox authored
PL2303 has private data shovelling methods that also have no fast path. Fix them to work the same way as the default handler. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alan Cox authored
The sysrq code acquired a kref leak. Fix it by passing the tty separately from the caller (thus effectively using the callers kref which all the callers hold anyway) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alan Cox authored
We can't go around calling all sorts of magic per character functions at full rate 3G data speed. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/ubi-2.6Linus Torvalds authored
* 'linux-next' of git://git.infradead.org/ubi-2.6: UBI: fix compilation warnings UBI: fix NOR flash recovery UBI: nicify image sequence number handling UBI: add image sequence number to EC header UBI: remove bogus debugging checks UBI: add empty eraseblocks verification
-
git://git.infradead.org/ubifs-2.6Linus Torvalds authored
* 'linux-next' of git://git.infradead.org/ubifs-2.6: UBIFS: fix corruption dump UBIFS: clean up free space checking UBIFS: small amendments in the LEB scanning code UBIFS: dump a little more in case of corruptions MAINTAINERS: update ahunter's e-mail address UBIFS: allow more than one volume to be mounted UBIFS: fix assertion warning UBIFS: minor spelling and grammar fixes UBIFS: fix 64-bit divisions in debug print UBIFS: few spelling fixes UBIFS: set write-buffer timout to 3-5 seconds UBIFS: slightly optimize write-buffer timer usage UBIFS: improve debugging messaged UBIFS: fix integer overflow warning
-
git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] define KTIME_SCALAR for 32-bit s390 [S390] add generic atomic64 support for 31 bit [S390] improve suspend/resume error messages [S390] set SCHED_OMIT_FRAME_POINTER for s390 [S390] add __ucmpdi2() helper function [S390] perf_counter build fix [S390] shutdown actions: save/return rc from init function [S390] dasd: correct debugfeature sense dump [S390] udelay: disable lockdep to avoid false positives [S390] monreader: fix dev_set_drvdata conversion [S390] sclp: fix compile error for !SCLP_CONSOLE
-
git://git.open-osd.org/linux-open-osdLinus Torvalds authored
* 'for-linus' of git://git.open-osd.org/linux-open-osd: osdblk: Adjust queue limits to lower device's limits osdblk: a Linux block device for OSD objects MAINTAINERS: Add osd maintained files (F:) exofs: Avoid using file_fsync() exofs: Remove IBM copyrights exofs: Fix bio leak in error handling path (sync read)
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intelLinus Torvalds authored
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (22 commits) drm/i915: Fix for LVDS VBT change on IGDNG drm/i915: Zap the GTT mapping when transitioning from untiled to tiled. drm/i915: Refactor calls to unmap_mapping_range drm/i915: Avoid saving/restore the modesetting registers twice in KMS mode drm: Disable the unused connectors explicitly when resuming with KMS. drm/i915: Restore the KMS modeset for every activated CRTC drm/i915: Fix harmless warning from patch merged after i2c rework. drm/i915: Disable GEM when a broken video BIOS takes up the whole aperture. drm/i915: Check the LID device to decide whether the LVDS should be initialized drm/i915: Move lock to more reasonable location drm/i915: Add gtt_offset to gem object list debugfs output drm/i915: Remove gtt_bound from drm_i915_gem_object drm/i915: Disable VGA output when doing DRM_MODE_DPMS_OFF. drm/i915: crt fetch EDID by DVI-I converter on G4x platform drm/i915: Don't update display FIFO watermark on IGDNG drm/i915: Adjust DisplayPort clocks to use 96MHz reference drm/i915: Make driver less chatty drm/i915: fix up a raw 64bit divide drm/i915: enable sdvo lvds scaling function. drm/i915: Set SSC frequency for 8xx chips correctly ...
-
Amerigo Wang authored
exception.txt only explains the code on x86, so it's better to move it into Documentation/x86 directory. And also rename it to exception-tables.txt which looks much more reasonable. This patch is on top of the previous one. Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Amerigo Wang authored
Update Documentation/exception.txt. Remove trailing whitespaces in it. Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Larry Finger authored
When building v2.6.31-rc2-344-g69ca06c9, the following build errors are found due to missing includes: CC [M] fs/fuse/dev.o fs/fuse/dev.c: In function ‘request_end’: fs/fuse/dev.c:289: error: ‘BLK_RW_SYNC’ undeclared (first use in this function) ... fs/nfs/write.c: In function ‘nfs_set_page_writeback’: fs/nfs/write.c:207: error: ‘BLK_RW_ASYNC’ undeclared (first use in this function) Signed-off-by: Larry Finger@lwfinger.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 10 Jul, 2009 2 commits
-
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: cfq-iosched: reset oom_cfqq in cfq_set_request() block: fix sg SG_DXFER_TO_FROM_DEV regression block: call blk_scsi_ioctl_init() Fix congestion_wait() sync/async vs read/write confusion
-
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: fix disorder in cp count on error during deleting checkpoints nilfs2: fix lockdep warning between regular file and inode file nilfs2: fix incorrect KERN_CRIT messages in case of write failures nilfs2: fix hang problem of log writer which occurs after write failures nilfs2: remove unlikely directive causing mis-conversion of error code
-