Yoshihiro Shimoda says:

====================
net: renesas: rswitch: Improve perfromance of TX/RX

This patch series is based on net-next.git / main branch [1]. This patch
series can improve perfromance of TX in a specific condition. The previous code
used "global rate limiter" feature so that this is possible to cause
performance down if we use multiple ports at the same time. To resolve this
issue, use "hardware pause" features of GWCA and COMA. Note that this is not
related to the ethernet PAUSE frames.

< UDP TX by iperf3 >
 before: about 450Mbps on both tsn0 and tsn1
 after:  about 950Mbps on both tsn0 and tsn1

Also, this patch series can improve performance of RX by using
napi_gro_receive().

< TCP RX by iperf >
 before: about 670Mbps on tsn0
 after:  about 840Mbps on tsn0

[1]
The commit e06bd5e3 ("Merge branch 'followup-fixes-for-the-dwmac-and-altera-lynx-conversion'")

Changes from v3:
https://lore.kernel.org/all/20230607015641.1724057-1-yoshihiro.shimoda.uh@renesas.com/
 - Rebased on the latest net-next.git / main branch.
 - Added Reviewed-by in the patch 2/2. (Maciej, thanks!)
 - Fix typos in the commit description in the patch 2/2.

Changes from v2:
https://lore.kernel.org/all/20230606085558.1708766-1-yoshihiro.shimoda.uh@renesas.com/
 - Rebased on the latest net-next.git / main branch.
 - Added Reviewed-by in the patch 1/2. (Maciej, thanks!)
 - Revise the commit description in the patch 2/2.
 - Add definition to remove magic hardcoded numbers in the patch 2/2.

Changes from v1:
https://lore.kernel.org/all/20230529080840.1156458-1-yoshihiro.shimoda.uh@renesas.com/
 - Rebased on the latest net-next.git / main branch.
 - Use "hardware pause" feature instead of "per-queue limiter" feature.
 - Drop refactaring for "per-queue limiter".
 - Drop dt-bindings update because "hardware pause" doesn't need additional
   clock information.
 - Use napi_gro_receive() to improve RX performance.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Since this driver used the "global rate limiter" feature of GWCA,
the TX performance of each port was reduced when multiple ports
transmitted frames simultaneously. To improve performance, remove
the use of the "global rate limiter" feature and use "hardware pause"
features of the following:
 - "per priority pause" of GWCA
 - "global pause" of COMA

Note that these features are not related to the ethernet PAUSE frame.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This hardware can receive multiple frames so that using
napi_gro_receive() instead of netif_receive_skb() gets good
performance of RX.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Edward Cree says:

====================
sfc: TC encap actions offload

This series adds support for offloading TC tunnel_key set actions to the
 EF100 driver, supporting VxLAN and GENEVE tunnels over IPv4 or IPv6.
====================

Link: https://lore.kernel.org/r/cover.1686240142.git.ecree.xilinx@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Support constructing VxLAN and GENEVE headers, on either IPv4 or IPv6,
 using the neighbouring information obtained in encap->neigh to
 populate the Ethernet header.
Note that the ef100 hardware does not insert UDP checksums when
 performing encap, so for IPv6 the remote endpoint will need to be
 configured with udp6zerocsumrx or equivalent.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

For each neighbour we're interested in, create a struct efx_neigh_binder
 object which has a list of all the encap_actions using it.  When we
 receive a neighbouring update (through the netevent notifier), find the
 corresponding efx_neigh_binder and update all its users.
Since the actual generation of encap headers is still only a stub, the
 resulting rules still get left on fallback actions.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Besides the raw header data, also pass the tunnel type, so that the
 hardware knows it needs to update the IP Total Length and UDP Length
 fields (and corresponding checksums) for each packet.
Also, populate the ENCAP_HEADER_ID field in efx_mae_alloc_action_set()
 with the fw_id returned from efx_mae_allocate_encap_md().
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

efx_mae_update_rule() changes the action-set-list attached to an MAE
 flow rule in the Action Rule Table.
We will use this when neighbouring updates change encap actions.
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Create software objects to manage the metadata for encap actions that
 can be attached to TC rules.  However, since we don't yet have the
 neighbouring information (needed to generate the Ethernet header),
 all rules with encap actions are marked as "unready" and thus insert
 the fallback action into hardware rather than actually offloading the
 encapsulation action.
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When offloading a TC encap action, the action information for the
 hardware might not be "ready": if there's currently no neighbour entry
 available for the destination address, we can't construct the Ethernet
 header to prepend to the packet.  In this case, we still offload the
 flow rule, but with its action-set-list ID pointing at a "fallback"
 action which simply delivers the packet to its default destination (as
 though no flow rule had matched), thus allowing software TC to handle
 it.  Later, when we receive a neighbouring update that allows us to
 construct the encap header, the rule will become "ready" and we will
 update its action-set-list ID in hardware to point at the actual
 offloaded actions.
This patch sets up these fallback ASLs, but does not yet use them.
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Move declarations into include/net/gso.h and code into net/core/gso.c
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230608191738.3947077-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Matthieu Baerts says:

====================
mptcp: unify PM interfaces

These patches from Geliang better isolate the two MPTCP path-managers by
avoiding calling userspace PM functions from the in-kernel PM. Instead,
new functions declared in pm.c directly dispatch to the right PM.

In addition to have a clearer code, this also avoids a bit of duplicated
checks.

This is a refactoring, there is no behaviour change intended here.
====================

Link: https://lore.kernel.org/r/20230608-upstream-net-next-20230608-mptcp-unify-pm-interfaces-v1-0-b301717c9ff5@tessares.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This patch unifies the three PM set_flags() interfaces:

mptcp_pm_nl_set_flags() in mptcp/pm_netlink.c for the in-kernel PM and
mptcp_userspace_pm_set_flags() in mptcp/pm_userspace.c for the
userspace PM.

They'll be switched in the common PM infterface mptcp_pm_set_flags() in
mptcp/pm.c based on whether token is NULL or not.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch unifies the three PM get_flags_and_ifindex_by_id() interfaces:

mptcp_pm_nl_get_flags_and_ifindex_by_id() in mptcp/pm_netlink.c for the
in-kernel PM and mptcp_userspace_pm_get_flags_and_ifindex_by_id() in
mptcp/pm_userspace.c for the userspace PM.

They'll be switched in the common PM infterface
mptcp_pm_get_flags_and_ifindex_by_id() in mptcp/pm.c based on whether
mptcp_pm_is_userspace() or not.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch unifies the three PM get_local_id() interfaces:

mptcp_pm_nl_get_local_id() in mptcp/pm_netlink.c for the in-kernel PM and
mptcp_userspace_pm_get_local_id() in mptcp/pm_userspace.c for the
userspace PM.

They'll be switched in the common PM infterface mptcp_pm_get_local_id()
in mptcp/pm.c based on whether mptcp_pm_is_userspace() or not.

Also put together the declarations of these three functions in protocol.h.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Rename local_address() with "mptcp_" prefix and export it in protocol.h.

This function will be re-used in the common PM code (pm.c) in the
following commit.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-next-2023-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.5

The second pull request for v6.5. We have support for three new
Realtek chipsets, all from different generations. Shows how active
Realtek development is right now, even older generations are being
worked on.

Note: We merged wireless into wireless-next to avoid complex conflicts
between the trees.

Major changes:

rtl8xxxu
 - RTL8192FU support

rtw89
 - RTL8851BE support

rtw88
 - RTL8723DS support

ath11k
 - Multiple Basic Service Set Identifier (MBSSID) and Enhanced MBSSID
   Advertisement (EMA) support in AP mode

iwlwifi
 - support for segmented PNVM images and power tables
 - new vendor entries for PPAG (platform antenna gain) feature

cfg80211/mac80211
 - more Multi-Link Operation (MLO) support such as hardware restart
 - fixes for a potential work/mutex deadlock and with it beginnings of
   the previously discussed locking simplifications

* tag 'wireless-next-2023-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (162 commits)
  wifi: rtlwifi: remove misused flag from HAL data
  wifi: rtlwifi: remove unused dualmac control leftovers
  wifi: rtlwifi: remove unused timer and related code
  wifi: rsi: Do not set MMC_PM_KEEP_POWER in shutdown
  wifi: rsi: Do not configure WoWlan in shutdown hook if not enabled
  wifi: brcmfmac: Detect corner error case earlier with log
  wifi: rtw89: 8852c: update RF radio A/B parameters to R63
  wifi: rtw89: 8852c: update TX power tables to R63 with 6 GHz power type (3 of 3)
  wifi: rtw89: 8852c: update TX power tables to R63 with 6 GHz power type (2 of 3)
  wifi: rtw89: 8852c: update TX power tables to R63 with 6 GHz power type (1 of 3)
  wifi: rtw89: process regulatory for 6 GHz power type
  wifi: rtw89: regd: update regulatory map to R64-R40
  wifi: rtw89: regd: judge 6 GHz according to chip and BIOS
  wifi: rtw89: refine clearing supported bands to check 2/5 GHz first
  wifi: rtw89: 8851b: configure CRASH_TRIGGER feature for 8851B
  wifi: rtw89: set TX power without precondition during setting channel
  wifi: rtw89: debug: txpwr table access only valid page according to chip
  wifi: rtw89: 8851b: enable hw_scan support
  wifi: cfg80211: move scan done work to wiphy work
  wifi: cfg80211: move sched scan stop to wiphy work
  ...
====================

Link: https://lore.kernel.org/r/87bkhohkbg.fsf@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jakub Kicinski says:

====================
tools: ynl-gen: code gen improvements before ethtool

I was going to post ethtool but I couldn't stand the ugliness
of the if conditions which were previously generated.
So I cleaned that up and improved a number of other things
ethtool will benefit from.
====================

Link: https://lore.kernel.org/r/20230608211200.1247213-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Kernel does not have padding requirements for 64b attrs.
We can ignore pad attrs.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The op_name argument is barely used and identical to op.name
in all cases.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Netlink specs support both events and notifications (former can
define their own message contents). Plug in missing code to
generate types, parsers and include events into notification
tables.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Don't modify the raw dicts (as loaded from YAML) to pretend
that the notify attributes also exist on the ops. This makes
the code easier to follow.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Remove unused notification handlers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Common notification handler was supposed to be a way for the user
to parse the notifications from a socket synchronously.
I don't think we'll end up using it, ynl_ntf_check() works for
all known use cases.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Renegate the code to combine } and else and use tmp variable
to store type.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Reading attr type with mnl_attr_get_type() for each condition
leads to most conditions being longer than 80 chars.
Avoid this by reading the type to a variable on the stack.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Code gen currently prints:

  }
  else if (...

This is really ugly. Fix it by delaying printing of closing
brackets in anticipation of else coming along.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

C keywords need to be avoided when naming things.
Complete the list (ethtool has at least one thing called "auto").
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Remove unnecessary includes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Bots started screaming that we're including stdlib.h twice.
While at it move string.h into a common spot and drop stdio.h
which we don't need.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5464
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5466
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5467Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This reverts commit e7c5433c.

Commit e7c5433c ("tools: ynl: Remove duplicated include
in handshake-user.c") was applied too hastily. It changes
an auto-generated file, and there's already a proper fix
on the list.

Link: https://lore.kernel.org/all/ZIMPLYi%2FxRih+DlC@nanopsycho/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

./tools/net/ynl/generated/handshake-user.c: stdlib.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5464Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
LED brightness support for Broadcom PHYs

This patch series adds support for controlling the LED brightness on
Broadcom PHYs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Broadcom PHYs have two LEDs selector registers which allow us to control
the LED assignment, including how to turn them on/off.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These registers are common to most PHYs and are not specific to the
BCM5482, renamed the constants accordingly, no functional change.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ivan Mikhaylov says:

====================
net/ncsi: refactoring for GMA command

Make one GMA function for all manufacturers, change ndo_set_mac_address
to dev_set_mac_address for notifiying net layer about MAC change which
ndo_set_mac_address doesn't do.

Changes from v1:
	1. delete ftgmac100.txt changes about mac-address-increment
	2. add convert to yaml from ftgmac100.txt
	3. add mac-address-increment option for ethernet-controller.yaml

Changes from v2:
	1. remove DT changes from series, will be done in another one
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Change ndo_set_mac_address to dev_set_mac_address because
dev_set_mac_address provides a way to notify network layer about MAC
change. In other case, services may not aware about MAC change and keep
using old one which set from network adapter driver.

As example, DHCP client from systemd do not update MAC address without
notification from net subsystem which leads to the problem with acquiring
the right address from DHCP server.

Fixes: cb10c7c0 ("net/ncsi: Add NCSI Broadcom OEM command")
Cc: stable@vger.kernel.org # v6.0+ 2f38e84 net/ncsi: make one oem_gma function for all mfr id
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make the one Get Mac Address function for all manufacturers and change
this call in handlers accordingly.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This module has for a long time not been limited to iPhone <= 3GS.
Update description to match the actual state of the driver.

Remove dead link from 2010, instead reference an existing userspace
iOS device pairing implementation as part of libimobiledevice.
Signed-off-by: Foster Snowhill <forst@pen.gy>
Signed-off-by: David S. Miller <davem@davemloft.net>

Recent iOS releases support CDC NCM encapsulation on RX. This mode is
the default on macOS and Windows. In this mode, an iOS device may include
one or more Ethernet frames inside a single URB.

Freshly booted iOS devices start in legacy mode, but are put into
NCM mode by the official Apple driver. When reconnecting such a device
from a macOS/Windows machine to a Linux host, the device stays in
NCM mode, making it unusable with the legacy ipheth driver code.

To correctly support such a device, the driver has to either support
the NCM mode too, or put the device back into legacy mode.

To match the behaviour of the macOS/Windows driver, and since there
is no documented control command to revert to legacy mode, implement
NCM support. The device is attempted to be put into NCM mode by default,
and falls back to legacy mode if the attempt fails.
Signed-off-by: Foster Snowhill <forst@pen.gy>
Tested-by: Georgi Valkov <gvalkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>