- 08 Oct, 2012 3 commits
-
-
Dmitry Torokhov authored
Do the rename to make the logic more clear and also change it to bool while at it. Reviewed-by:
David Herrmann <dh.herrmann@googlemail.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Reformat structure initializers to match the rest of input handlers Reviewed-by:
-
Dmitry Torokhov authored
Reviewed-by:
-
- 05 Oct, 2012 4 commits
-
-
Thomas Abraham authored
Add calls to clk_prepare and clk_unprepare as required by commom clock framework. Signed-off-by:
Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by:
-
Andy Shevchenko authored
Use %*ph format specifier to print small buffer. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Jason Gerecke authored
Rewrites this function to be easier to read and understand. The new function 'wacom_set_device_mode' now handles the grunt work of assembling the proper feature report, sending it to the device, and ensuring the setting "sticks". Signed-off-by:
Jason Gerecke <killertofu@gmail.com> Tested-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
-
Jason Gerecke authored
The Cintiq 24HD touch cannot use wacom_set_phy_from_res to determine the physical size of the touch sensor since the pen and touch are on separate USB devices. The physical size is, however, provided in the HID descriptor, just scaled to a unit we don't use. This patch introduces the function wacom_fix_phy_from_hid to let us make use of the unit and exponent data provided by HID to set the [xy]_phy variables to an appropriate value. This function relies on a trimmed-down version of hidinput_calc_abs_res from the hid-input.c. Signed-off-by:
-
- 04 Oct, 2012 2 commits
-
-
Jason Gerecke authored
The ability to set the proximity flag should apply to any device that has both pen and touch input. Rather than listing classes of devices known to meet this criteria, simply filter on the quirk defining all such devices. Signed-off-by:
-
Jason Gerecke authored
This changes how the touch packets for Intuos5 and 3rd-gen Bamboo are interpreted, so that proper values for the MAJOR and MINOR axes are reported. Instead of using the amplitude field (data[6]), we use the size field (data[5]) and do some calculation to transform it from a scaled-down area into axis lengths. Note that even though we assume a circular contact, both MAJOR and MINOR are reported since the resolution of the X and Y axes differ. Signed-off-by:
Chris Bagwell <chris@cnpbagwell.com> Acked-by:
-
- 01 Oct, 2012 1 commit
-
-
git://github.com/rydberg/linuxDmitry Torokhov authored
Merge Henrik's updates to multitouch code. Even though Jiri already pulled them in I need to do it too since my changes to evdev using dynamic major would clash with them.
-
- 19 Sep, 2012 21 commits
-
-
Henrik Rydberg authored
Use of the in-kernel tracking code to convert the driver to MT-B. With ten fingers on the pad, the in-kernel tracking adds approximately 25 us to the maximum irqsoff latency. Under normal workloads, however, the tracking has no measurable effect. Tested-by:
Benjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by:
Henrik Rydberg <rydberg@euromail.se>
-
Henrik Rydberg authored
The logical scale is used to produce special finger width values to userspace, but has become an unnecessary restriction for everything else. Also, the bcm5974 trackpads are very accurate and work well without hysteresis. This patch simplifies the driver and device data by removing the logical scale, and by moving the special synaptics code out of the main path. Also add the orientation range, needed in a subsequent patch, to the device configuration. Tested-by:
-
Henrik Rydberg authored
Rename touch properties to match established nomenclature, and define the maximum number of fingers. Tested-by:
-
Henrik Rydberg authored
The early generations with this trackpad used the separate mouse interface to produce button events. With the introduction of the button pads, this information was moved to the trackpad interface, leaving the mouse interface unused. The driver is still setting up both interfaces, which has not caused any problems - until now. It turns out that without the CONFIG_USB_EHCI_TT_NEWSCHED option, the driver may return an ENOSPC upon bt_urb submission, resulting in a failure to open the device. This happens everytime on the MacBookPro Retina (and likely on other mid-2012 models), but earlier MacBook models seem to work fine. This patch skips the bt_urb setup for TYPE2 devices, which arguably should have been done in the first place. Tested-by:
-
Henrik Rydberg authored
Add support for the Flatfrog Multitouch 3200 panel. This panel advertises some fields that it does not use, hence the new quirk. Cc: Pablo Cases <pablo.cases@flatfrog.com> Acked-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Henrik Rydberg authored
Some devices report the number of contacts via the unreliable CONTACTCOUNT usage, rather than using the CONTACTMAX feature. Without this patch, the 3M devices are constrained to the default maximum of ten fingers. Cc: Benjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by:
-
Henrik Rydberg authored
With the input_mt_sync_frame() function in place, there is no longer any need to keep the full touch state in the driver. This patch removes the slot state and replaces the lookup code with the input-mt equivalent. Reviewed-and-tested-by:
-
Henrik Rydberg authored
With the input_configured() callback in place, the setup and frame synchronization can be simplified. The input device initialization is moved to mt_input_configured(), to make sure the full HID report has been seen. Reviewed-and-tested-by:
-
Henrik Rydberg authored
Some recent hardware define more than 128 fields in the report descriptor. Increase the limit to 256. This adds another kilobyte of memory per report. Tested-by:
-
Henrik Rydberg authored
A hid device may create several input devices, and a driver may need to prepare or finalize the configuration per input device. Currently, there is no sane way for a driver to know when a device has been configured. This patch adds a callback providing that information. Reviewed-and-tested-by:
-
Henrik Rydberg authored
Some drivers like to report ABS_PRESSURE in a special way. Allow this when ABS_MT_PRESSURE is not defined. Acked-by:
-
Henrik Rydberg authored
Some devices use an internal key for tracking which cannot be directly mapped to slots. This patch provides a key-to-slot mapping, which can be used by drivers of such devices. Reviewed-and-tested-by:
-
Henrik Rydberg authored
With the INPUT_MT_TRACK flag set, the function input_mt_assign_slots() can be used to match a new set of contacts against the currently used slots. The algorithm used is based on Lagrange relaxation, and performs very well in practice; slower than mtdev for a few corner cases, but faster in most commonly occuring cases. Tested-by:
-
Henrik Rydberg authored
Most MT drivers perform the same actions on frame synchronization. Some actions, like dropping unseen contacts, are also unnecessarily complex. Collect common frame synchronization tasks in a new function, input_mt_sync_frame(). Depending on the flags set, it drops unseen contacts and performs pointer emulation. With init flags and frame synchronization in place, most MT drivers can be simplified. First out are the bcm5974 and hid-multitouch drivers, following this patch. Reviewed-and-tested-by:
-
Henrik Rydberg authored
Preparing to move more repeated code into the mt core, add a flags argument to the input_mt_slots_init() function. Reviewed-and-tested-by:
-
Henrik Rydberg authored
By sending a full frame of events at the same time, the irqsoff latency at heavy load is brought down from 200 us to 100 us. Cc: Daniel Kurtz <djkurtz@chromium.org> Tested-by:
-
Henrik Rydberg authored
On heavy event loads, such as a multitouch driver, the irqsoff latency can be as high as 250 us. By accumulating a frame worth of data before passing it on, the latency can be dramatically reduced. As a side effect, the special EV_SYN handling can be removed, since the frame is now atomic. This patch adds the events() handler callback and uses it if it exists. The latency is improved by 50 us even without the callback. Cc: Daniel Kurtz <djkurtz@chromium.org> Tested-by:
Sedat Dilek <sedat.dilek@gmail.com> Acked-by:
-
Henrik Rydberg authored
Preparing to split event filtering and event passing, move the autorepeat function to the point where the event is actually passed. Tested-by:
-
Henrik Rydberg authored
For some EV_KEY types, sending a larger-than-one value causes the input state to oscillate. This patch makes sure this cannot happen, clearing up the autorepeat bypass logic in the process. Tested-by:
-
Henrik Rydberg authored
The events-per-packet estimate has so far been used by MT devices only. This patch adjusts the packet buffer size to also accomodate the KEY and MSC events. Keyboards normally send one or two keys at a time. MT devices normally send a number of button keys along with the MT information. The buffer size chosen here covers those cases, and matches the default buffer size in evdev. Since the input estimate is now preferred, remove the special input-mt estimate. Reviewed-and-tested-by:
-
Henrik Rydberg authored
Move all MT-related things to a separate place. This saves some bytes for non-mt input devices, and prepares for new MT features. Reviewed-and-tested-by:
-
- 13 Sep, 2012 2 commits
-
-
Andy Shevchenko authored
Signed-off-by:
-
Alexandre Pereira da Silva authored
pdata->nbuttons should be updated by the dt code. Signed-off-by:
Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by:
Dmitry Torokhov <dtor@mail.ru>
-
- 05 Sep, 2012 5 commits
-
-
Michael Schutte authored
Allow handling of Unicode compose sequences by 32-bit apps on a 64-bit system. The issue has been reported in <http://bugs.debian.org/540534> and <http://lists.altlinux.org/pipermail/kbd/2009-December/000235.html>. A formal check of the two affected ioctls in drivers/char/vt_ioctl.c (introduced in 04c71976) and a test using x86 kbd 1.15.1 on a so patched x86_64 kernel both confirm that KD[GS]KBDIACRUC are ioctl32() compatible. Signed-off-by:
Michael Schutte <michi@uiae.at> Signed-off-by:
-
Josh authored
Fixed spacing error on if statements and fixed tab error. Signed-off-by:
Josh <joshua.taylor0@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
Linux 3.6-rc4 # gpg: Signature made Sat 01 Sep 2012 10:40:33 AM PDT using RSA key ID 00411886 # gpg: Good signature from "Linus Torvalds <torvalds@linux-foundation.org>"
-
Stephen Warren authored
Move the Tegra KBC platform data header out of arch/arm/mach-tegra, as a pre-requisite of single zImage. Signed-off-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
-
Jason Gerecke authored
Adds support for the EMR digitizer on the Cintiq 24HD touch. The EMR digitizer should work identically to that found on the Cintiq 24HD. The touch digitizer is a separate USB device similar to how we split apart some other devices. Signed-off-by:
-
- 01 Sep, 2012 2 commits
-
-
Linus Torvalds authored
-
John Stultz authored
Andreas Bombe reported that the added ktime_t overflow checking added to timespec_valid in commit 4e8b1452 ("time: Improve sanity checking of timekeeping inputs") was causing problems with X.org because it caused timeouts larger then KTIME_T to be invalid. Previously, these large timeouts would be clamped to KTIME_MAX and would never expire, which is valid. This patch splits the ktime_t overflow checking into a new timespec_valid_strict function, and converts the timekeeping codes internal checking to use this more strict function. Reported-and-tested-by:
Andreas Bombe <aeb@debian.org> Cc: Zhouping Liu <zliu@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
