Merge tag 'probes-fixes-v6.11-pre-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull uprobe fix from Masami Hiramatsu:

 - Add sys_uretprobe entry to scripts/syscall.tbl.

* tag 'probes-fixes-v6.11-pre-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  syscalls: Fix to add sys_uretprobe to syscall.tbl

Pull power sequencing fixes from Bartosz Golaszewski:
 "There's one fix for an invalid pointer dereference in error path
  reported by smatch and two patches that address the noisy config
  choices you reported earlier this week.

  Summary:

   - fix an invalid pointer dereference in error path in pwrseq core

   - reduce the Kconfig noise from PCI pwrctl choices"

* tag 'pwrseq-fixes-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  arm64: qcom: don't select HAVE_PWRCTL when PCI=n
  Kconfig: reduce the amount of power sequencing noise
  power: sequencing: fix an invalid pointer dereference in error path

Pull sound updates from Takashi Iwai:
 "Lots of changes in this cycle, but mostly for cleanups and
  refactoring.

  Significant amount of changes are about DT schema conversions for ASoC
  at this time while we see other usual suspects, too.

  Some highlights below:

  Core:
   - Re-introduction of PCM sync ID support API
   - MIDI2 time-base extension in ALSA sequencer API

  ASoC:
   - Syncing of features between simple-audio-card and the two
     audio-graph cards
   - Support for specifying the order of operations for components
     within cards to allow quirking for unusual systems
   - Lots of DT schema conversions
   - Continued SOF/Intel updates for topology, SoundWire, IPC3/4
   - New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
     Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5
     and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments
     PCM5242

  HD-audio:
   - More quirks, Intel PantherLake support, senarytech codec support
   - Refactoring of Cirrus codec component-binding

  Others:
   - ALSA control kselftest improvements, and fixes for input value
     checks in various drivers"

* tag 'sound-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (349 commits)
  kselftest/alsa: Log the PCM ID in pcm-test
  kselftest/alsa: Use card name rather than number in test names
  ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360
  ALSA: hda/tas2781: Add new quirk for Lenovo Hera2 Laptop
  ALSA: seq: ump: Skip useless ports for static blocks
  ALSA: pcm_dmaengine: Don't synchronize DMA channel when DMA is paused
  ALSA: usb: Use BIT() for bit values
  ALSA: usb: Fix UBSAN warning in parse_audio_unit()
  ALSA: hda/realtek: Enable headset mic on Positivo SU C1400
  ASoC: tas2781: Add new Kontrol to set tas2563 digital Volume
  ASoC: codecs: wcd937x: Remove separate handling for vdd-buck supply
  ASoC: codecs: wcd937x: Remove the string compare in MIC BIAS widget settings
  ASoC: codecs: wcd937x-sdw: Fix Unbalanced pm_runtime_enable
  ASoC: dt-bindings: cirrus,cs42xx8: Convert to dtschema
  ASoC: cs530x: Remove bclk from private structure
  ASoC: cs530x: Calculate proper bclk rate using TDM
  ASoC: dt-bindings: cirrus,cs4270: Convert to dtschema
  firmware: cs_dsp: Rename fw_ver to wmfw_ver
  firmware: cs_dsp: Clarify wmfw format version log message
  firmware: cs_dsp: Make wmfw and bin filename arguments const char *
  ...

Pull clk updates from Stephen Boyd:
 "This a large collection of clk driver updates and a handful of new SoC
  clk driver support.

  We have the usual Qualcomm clk drivers, along with clk drivers for the
  Sophgo and T-Head vendors, all to support some new SoCs.

  Nothing in particular stands out to me in the updates. There's the
  interconnect clk driver which exposes clks as interconnects, crossing
  subsystems. There's a bunch of janitorial things that are improving
  drivers in general like kmemdup_array() or fixing error paths. But
  overall the updates look normal to fix the description data which is
  usually the stuff that's wrong and/or untested.

  Core:
   - Skip gate basic type KUnit tests on s390 due to lack of MMIO
     emulation

  New Drivers:
   - AP sub-system clock controller in the T-Head TH1520
   - Sophgo Sophon sg2042 clk driver
   - Qualcomm SM7150 camera, display and video clk drivers
   - Qualcomm QCM2290 GPU clk driver
   - Qualcomm QCS8386/QCS8084 NSS clk driver
   - Qualcomm SM8650 camera and video drivers

  Updates:
   - Add reset support to Airoha EN7581 clk driver
   - Add MODULE_DESCRIPTIONs to various clk drivers
   - Introduce helper logic to expose clock controllers as simple
     interconnect providers
   - Use the interconnect helper above on Qualcomm ipq9574
   - Add CLK_SET_RATE_PARENT to the remaining USB pipe clocks on
     Qualcomm X1Elite
   - Improve error handling in Qualcomm kpss-xcc driver
   - Mark Qualcomm SC8280XP LPASS clock controller regmap_config const
   - Export more clocks for Rockchip rk3128 peripherals
   - Convert Rockchip clk drivers to use kmemdup_array()
   - Drop CLK_NR_CLKS from Rockchip rk3128 and rk3188 binding headers
   - Make qcom_cc_really_probe() take a struct device to allow reuse in
     non-platform-drivers
   - Introduce prepare-only branch clock ops in the qcom clk driver to
     support clocks on buses that take locks
   - Describe parent/child relationship for Qualcomm SC7280 camera GDSCs
   - Support Qualcomm Huayra 2290 alpha PLL
   - Adjust the highest SDCC clock frequency on Qualcomm IPQ6018 to
     match HS200 support
   - Add missing PCIe PIPE clocks on Qualcomm IPQ9574
   - Fix various configurations and properties in the Qualcomm SA8775P,
     X1E80100 and SM7280 drivers
   - Park Qualcomm SM8350 GPU RCGs on XO while disabled
   - Remove unused CONFIG_QCOM_RPMCC Kconfig symbol
   - exynos-clkout: Remove usage of of_device_id table as
     .of_match_table, because the driver is instantiated as MFD cell,
     not as standalone platform driver. Populated .of_match_table
     confused people few times to convert the code to
     device_get_match_data(), which broke the driver
   - Mark one Samsung UFS clock as critical, because having it off stops
     the system from shutdown
   - Use kmemdup_array() when applicable
   - Remove unused 'struct gates_data' from old sunxi driver library
   - Add GPADC clock and reset for Allwinner H616
   - Minor Amlogic S4 clock fixes
   - DT bindings Yaml conversion of the Amlogic AXG audio controller
   - Amlogic C3 clock controllers support
   - Amlogic clk flag added to skip init of already enabled PLLs and
     avoid relocking
   - Amlogic A1 DT bindings updates for system pll support
   - Add missing MODULE_DESCRIPTION where necessary
   - Remove obsolete clock DT binding header files
   - Add Battery Backup (VBATTB) and I2C clocks, resets, and power
     domains on Renesas RZ/G3S
   - Add audio clocks on Renesas R-Car V4M
   - Add video capture (ISPCS, CSI-2, VIN) clocks on Renesas R-Car V4M"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (135 commits)
  clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks
  dt-bindings: clock: Document T-Head TH1520 AP_SUBSYS controller
  clk: sophgo: Avoid -Wsometimes-uninitialized in sg2042_clk_pll_set_rate()
  clk/sophgo: Using BUG() instead of unreachable() in mmux_get_parent_id()
  clk: mxs: Use clamp() in clk_ref_round_rate() and clk_ref_set_rate()
  clk: sunxi-ng r40: Constify struct regmap_config
  clk: en7523: fix rate divider for slic and spi clocks
  clk: lpc32xx: Constify struct regmap_config
  clk: xilinx: Constify struct regmap_config
  clk: en7523: Remove PCIe reset open drain configuration for EN7581
  clk: en7523: Remove pcie prepare/unpreare callbacks for EN7581 SoC
  clk: en7523: Add reset-controller support for EN7581 SoC
  dt-bindings: clock: airoha: Add reset support to EN7581 clock binding
  dt-bindings: clock: mediatek: Document reset cells for MT8188 sys
  clk: mediatek: mt8173-infracfg: Handle unallocated infracfg when module
  dt-bindings: clock: mediatek: add syscon compatible for mt7622 pciesys
  dt-bindings: clock: sprd,sc9860-clk: convert to YAML
  dt-bindings: clock: qoriq-clock: convert to yaml format
  clk: qcom: Park shared RCGs upon registration
  clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks
  ...

Pull virtio updates from Michael Tsirkin:
 "Several new features here:

   - Virtio find vqs API has been reworked (required to fix the
     scalability issue we have with adminq, which I hope to merge later
     in the cycle)

   - vDPA driver for Marvell OCTEON

   - virtio fs performance improvement

   - mlx5 migration speedups

  Fixes, cleanups all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (56 commits)
  virtio: rename virtio_find_vqs_info() to virtio_find_vqs()
  virtio: remove unused virtio_find_vqs() and virtio_find_vqs_ctx() helpers
  virtio: convert the rest virtio_find_vqs() users to virtio_find_vqs_info()
  virtio_balloon: convert to use virtio_find_vqs_info()
  virtiofs: convert to use virtio_find_vqs_info()
  scsi: virtio_scsi: convert to use virtio_find_vqs_info()
  virtio_net: convert to use virtio_find_vqs_info()
  virtio_crypto: convert to use virtio_find_vqs_info()
  virtio_console: convert to use virtio_find_vqs_info()
  virtio_blk: convert to use virtio_find_vqs_info()
  virtio: rename find_vqs_info() op to find_vqs()
  virtio: remove the original find_vqs() op
  virtio: call virtio_find_vqs_info() from virtio_find_single_vq() directly
  virtio: convert find_vqs() op implementations to find_vqs_info()
  virtio_pci: convert vp_*find_vqs() ops to find_vqs_info()
  virtio: introduce virtio_queue_info struct and find_vqs_info() config op
  virtio: make virtio_find_single_vq() call virtio_find_vqs()
  virtio: make virtio_find_vqs() call virtio_find_vqs_ctx()
  caif_virtio: use virtio_find_single_vq() for single virtqueue finding
  vdpa/mlx5: Don't enable non-active VQs in .set_vq_ready()
  ...

Pull VFIO updates from Alex Williamson:

 - Add support for 8-byte accesses when using read/write through the
   device regions.  This fills a gap for userspace drivers that might
   not be able to use access through mmap to perform native register
   width accesses (Gerd Bayer)

 - Add missing MODULE_DESCRIPTION to vfio-mdev sample drivers and
   replace a non-standard MODULE_INFO usage (Jeff Johnson)

* tag 'vfio-v6.11-rc1' of https://github.com/awilliam/linux-vfio:
  vfio-mdev: add missing MODULE_DESCRIPTION() macros
  vfio/pci: Fix typo in macro to declare accessors
  vfio/pci: Support 8-byte PCI loads and stores
  vfio/pci: Extract duplicated code into macro

Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr) plus some
  misc small fixes.

  The only core changes are to both bsg and scsi to pass in the device
  instead of setting it afterwards as q->queuedata, so no functional
  change"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (69 commits)
  scsi: aha152x: Use DECLARE_COMPLETION_ONSTACK for non-constant completion
  scsi: qla2xxx: Convert comma to semicolon
  scsi: qla2xxx: Update version to 10.02.09.300-k
  scsi: qla2xxx: Use QP lock to search for bsg
  scsi: qla2xxx: Reduce fabric scan duplicate code
  scsi: qla2xxx: Fix optrom version displayed in FDMI
  scsi: qla2xxx: During vport delete send async logout explicitly
  scsi: qla2xxx: Complete command early within lock
  scsi: qla2xxx: Fix flash read failure
  scsi: qla2xxx: Return ENOBUFS if sg_cnt is more than one for ELS cmds
  scsi: qla2xxx: Fix for possible memory corruption
  scsi: qla2xxx: validate nvme_local_port correctly
  scsi: qla2xxx: Unable to act on RSCN for port online
  scsi: ufs: exynos: Add support for Flash Memory Protector (FMP)
  scsi: ufs: core: Add UFSHCD_QUIRK_KEYS_IN_PRDT
  scsi: ufs: core: Add fill_crypto_prdt variant op
  scsi: ufs: core: Add UFSHCD_QUIRK_BROKEN_CRYPTO_ENABLE
  scsi: ufs: core: fold ufshcd_clear_keyslot() into its caller
  scsi: ufs: core: Add UFSHCD_QUIRK_CUSTOM_CRYPTO_PROFILE
  scsi: ufs: mcq: Make .get_hba_mac() optional
  ...

Merge tag 'for-6.11/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mikulas Patocka:

 - Optimize processing of flush bios in the dm-linear and dm-stripe
   targets

 - Dm-io cleansups and refactoring

 - Remove unused 'struct thunk' in dm-cache

 - Handle minor device numbers > 255 in dm-init

 - Dm-verity refactoring & enabling platform keyring

 - Fix warning in dm-raid

 - Improve dm-crypt performance - split bios to smaller pieces, so that
   They could be processed concurrently

 - Stop using blk_limits_io_{min,opt}

 - Dm-vdo cleanup and refactoring

 - Remove max_write_zeroes_granularity and max_secure_erase_granularity

 - Dm-multipath cleanup & refactoring

 - Add dm-crypt and dm-integrity support for non-power-of-2 sector size

 - Fix reshape in dm-raid

 - Make dm_block_validator const

* tag 'for-6.11/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (33 commits)
  dm vdo: fix a minor formatting issue in vdo.rst
  dm vdo int-map: fix kerneldoc formatting
  dm vdo repair: add missing kerneldoc fields
  dm: Constify struct dm_block_validator
  dm-integrity: introduce the Inline mode
  dm: introduce the target flag mempool_needs_integrity
  dm raid: fix stripes adding reshape size issues
  dm raid: move _get_reshape_sectors() as prerequisite to fixing reshape size issues
  dm-crypt: support for per-sector NVMe metadata
  dm mpath: don't call dm_get_device in multipath_message
  dm: factor out helper function from dm_get_device
  dm-verity: fix dm_is_verity_target() when dm-verity is builtin
  dm: Remove max_secure_erase_granularity
  dm: Remove max_write_zeroes_granularity
  dm vdo indexer: use swap() instead of open coding it
  dm vdo: remove unused struct 'uds_attribute'
  dm: stop using blk_limits_io_{min,opt}
  dm-crypt: limit the size of encryption requests
  dm verity: add support for signature verification with platform keyring
  dm-raid: Fix WARN_ON_ONCE check for sync_thread in raid_resume
  ...

Pull dma-mapping updates from Christoph Hellwig:

 - reduce duplicate swiotlb pool lookups (Michael Kelley)

 - minor small fixes (Yicong Yang, Yang Li)

* tag 'dma-mapping-6.11-2024-07-19' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: fix kernel-doc description for swiotlb_del_transient
  swiotlb: reduce swiotlb pool lookups
  dma-mapping: benchmark: Don't starve others when doing the test

Pull iommu updates from Will Deacon:
 "Core:

   - Support for the "ats-supported" device-tree property

   - Removal of the 'ops' field from 'struct iommu_fwspec'

   - Introduction of iommu_paging_domain_alloc() and partial conversion
     of existing users

   - Introduce 'struct iommu_attach_handle' and provide corresponding
     IOMMU interfaces which will be used by the IOMMUFD subsystem

   - Remove stale documentation

   - Add missing MODULE_DESCRIPTION() macro

   - Misc cleanups

  Allwinner Sun50i:

   - Ensure bypass mode is disabled on H616 SoCs

   - Ensure page-tables are allocated below 4GiB for the 32-bit
     page-table walker

   - Add new device-tree compatible strings

  AMD Vi:

   - Use try_cmpxchg64() instead of cmpxchg64() when updating pte

  Arm SMMUv2:

   - Print much more useful information on context faults

   - Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n

   - Add new Qualcomm device-tree bindings

  Arm SMMUv3:

   - Support for hardware update of access/dirty bits and reporting via
     IOMMUFD

   - More driver rework from Jason, this time updating the PASID/SVA
     support to prepare for full IOMMUFD support

   - Add missing MODULE_DESCRIPTION() macro

   - Minor fixes and cleanups

  NVIDIA Tegra:

   - Fix for benign fwspec initialisation issue exposed by rework on the
     core branch

  Intel VT-d:

   - Use try_cmpxchg64() instead of cmpxchg64() when updating pte

   - Use READ_ONCE() to read volatile descriptor status

   - Remove support for handling Execute-Requested requests

   - Avoid calling iommu_domain_alloc()

   - Minor fixes and refactoring

  Qualcomm MSM:

   - Updates to the device-tree bindings"

* tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (72 commits)
  iommu/tegra-smmu: Pass correct fwnode to iommu_fwspec_init()
  iommu/vt-d: Fix identity map bounds in si_domain_init()
  iommu: Move IOMMU_DIRTY_NO_CLEAR define
  dt-bindings: iommu: Convert msm,iommu-v0 to yaml
  iommu/vt-d: Fix aligned pages in calculate_psi_aligned_address()
  iommu/vt-d: Limit max address mask to MAX_AGAW_PFN_WIDTH
  docs: iommu: Remove outdated Documentation/userspace-api/iommu.rst
  arm64: dts: fvp: Enable PCIe ATS for Base RevC FVP
  iommu/of: Support ats-supported device-tree property
  dt-bindings: PCI: generic: Add ats-supported property
  iommu: Remove iommu_fwspec ops
  OF: Simplify of_iommu_configure()
  ACPI: Retire acpi_iommu_fwspec_ops()
  iommu: Resolve fwspec ops automatically
  iommu/mediatek-v1: Clean up redundant fwspec checks
  RDMA/usnic: Use iommu_paging_domain_alloc()
  wifi: ath11k: Use iommu_paging_domain_alloc()
  wifi: ath10k: Use iommu_paging_domain_alloc()
  drm/msm: Use iommu_paging_domain_alloc()
  vhost-vdpa: Use iommu_paging_domain_alloc()
  ...

Pull rdma updates from Jason Gunthorpe:
 "Usual collection of small improvements and fixes:

   - Bug fixes and minor improvments in efa, irdma, mlx4, mlx5, rxe,
     hf1, qib, ocrdma

   - bnxt_re support for MSN, which is a new retransmit logic

   - Initial mana support for RC qps

   - Use after free bug and cleanups in iwcm

   - Reduce resource usage in mlx5 when RDMA verbs features are not used

   - New verb to drain shared recieve queues, similar to normal recieve
     queues. This is necessary to allow ULPs a clean shutdown. Used in
     the iscsi rdma target

   - mlx5 support for more than 16 bits of doorbell indexes

   - Doorbell moderation support for bnxt_re

   - IB multi-plane support for mlx5

   - New EFA adaptor PCI IDs

   - RDMA_NAME_ASSIGN_TYPE_USER to hint to userspace that it shouldn't
     rename the device

   - A collection of hns bugs

   - Fix long standing bug in bnxt_re with incorrect endian handling of
     immediate data"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (65 commits)
  IB/hfi1: Constify struct flag_table
  RDMA/mana_ib: Set correct device into ib
  bnxt_re: Fix imm_data endianness
  RDMA: Fix netdev tracker in ib_device_set_netdev
  RDMA/hns: Fix mbx timing out before CMD execution is completed
  RDMA/hns: Fix insufficient extend DB for VFs.
  RDMA/hns: Fix undifined behavior caused by invalid max_sge
  RDMA/hns: Fix shift-out-bounds when max_inline_data is 0
  RDMA/hns: Fix missing pagesize and alignment check in FRMR
  RDMA/hns: Fix unmatch exception handling when init eq table fails
  RDMA/hns: Fix soft lockup under heavy CEQE load
  RDMA/hns: Check atomic wr length
  RDMA/ocrdma: Don't inline statistics functions
  RDMA/core: Introduce "name_assign_type" for an IB device
  RDMA/qib: Fix truncation compilation warnings in qib_verbs.c
  RDMA/qib: Fix truncation compilation warnings in qib_init.c
  RDMA/efa: Add EFA 0xefa3 PCI ID
  RDMA/mlx5: Support per-plane port IB counters by querying PPCNT register
  net/mlx5: mlx5_ifc update for accessing ppcnt register of plane ports
  RDMA/mlx5: Add plane index support when querying PTYS registers
  ...

Pull iommufd updates from Jason Gunthorpe:

 - The iova_bitmap logic for efficiently reporting dirty pages back to
   userspace has a few more tricky corner case bugs that have been
   resolved and backed with new tests.

   The revised version has simpler logic.

 - Shared branch with iommu for handle support when doing domain attach.

   Handles allow the domain owner to include additional private data on
   a per-device basis.

 - IO Page Fault Reporting to userspace via iommufd. Page faults can be
   generated on fault capable HWPTs when a translation is not present.

   Routing them to userspace would allow a VMM to be able to virtualize
   them into an emulated vIOMMU. This is the next step to fully enabling
   vSVA support.

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (26 commits)
  iommufd: Put constants for all the uAPI enums
  iommufd: Fix error pointer checking
  iommufd: Add check on user response code
  iommufd: Remove IOMMUFD_PAGE_RESP_FAILURE
  iommufd: Require drivers to supply the cache_invalidate_user ops
  iommufd/selftest: Add coverage for IOPF test
  iommufd/selftest: Add IOPF support for mock device
  iommufd: Associate fault object with iommufd_hw_pgtable
  iommufd: Fault-capable hwpt attach/detach/replace
  iommufd: Add iommufd fault object
  iommufd: Add fault and response message definitions
  iommu: Extend domain attach group with handle support
  iommu: Add attach handle to struct iopf_group
  iommu: Remove sva handle list
  iommu: Introduce domain attachment handle
  iommufd/iova_bitmap: Remove iterator logic
  iommufd/iova_bitmap: Dynamic pinning on iova_bitmap_set()
  iommufd/iova_bitmap: Consolidate iova_bitmap_set exit conditionals
  iommufd/iova_bitmap: Move initial pinning to iova_bitmap_for_each()
  iommufd/iova_bitmap: Cache mapped length in iova_bitmap_map struct
  ...

Merge tag 'tpmdd-next-6.11-rc1-roundtwo' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull tpm fix from Jarkko Sakkinen:
 "An additional fix that supplements my earlier fixes for handling auth,
  which I unfortunately missed last time"

* tag 'tpmdd-next-6.11-rc1-roundtwo' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: Use auth only after NULL check in tpm_buf_check_hmac_response()

Pull crypto update from Herbert Xu:
 "API:
   - Test setkey in no-SIMD context
   - Add skcipher speed test for user-specified algorithm

  Algorithms:
   - Add x25519 support on ppc64le
   - Add VAES and AVX512 / AVX10 optimized AES-GCM on x86
   - Remove sm2 algorithm

  Drivers:
   - Add Allwinner H616 support to sun8i-ce
   - Use DMA in stm32
   - Add Exynos850 hwrng support to exynos"

* tag 'v6.11-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (81 commits)
  hwrng: core - remove (un)register_miscdev()
  crypto: lib/mpi - delete unnecessary condition
  crypto: testmgr - generate power-of-2 lengths more often
  crypto: mxs-dcp - Ensure payload is zero when using key slot
  hwrng: Kconfig - Do not enable by default CN10K driver
  crypto: starfive - Fix nent assignment in rsa dec
  crypto: starfive - Align rsa input data to 32-bit
  crypto: qat - fix unintentional re-enabling of error interrupts
  crypto: qat - extend scope of lock in adf_cfg_add_key_value_param()
  Documentation: qat: fix auto_reset attribute details
  crypto: sun8i-ce - add Allwinner H616 support
  crypto: sun8i-ce - wrap accesses to descriptor address fields
  dt-bindings: crypto: sun8i-ce: Add compatible for H616
  hwrng: core - Fix wrong quality calculation at hw rng registration
  hwrng: exynos - Enable Exynos850 support
  hwrng: exynos - Add SMC based TRNG operation
  hwrng: exynos - Implement bus clock control
  hwrng: exynos - Use devm_clk_get_enabled() to get the clock
  hwrng: exynos - Improve coding style
  dt-bindings: rng: Add Exynos850 support to exynos-trng
  ...

Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407141607.M3E2XQ0Z-lkp@intel.com/Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>

Also remove trivial comment for increment_recovery_point.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9518Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>

'struct dm_block_validator' are not modified in these drivers.

Constifying this structure moves some data to a read-only section, so
increase overall security.

On a x86_64, with allmodconfig, as an example:

Before:
======
   text	   data	    bss	    dec	    hex	filename
  32047	    920	     16	  32983	   80d7	drivers/md/dm-cache-metadata.o

After:
=====
   text	   data	    bss	    dec	    hex	filename
  32075	    896	     16	  32987	   80db	drivers/md/dm-cache-metadata.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>

This commit introduces a new 'I' mode for dm-integrity.

The 'I' mode may be selected if the underlying device has non-power-of-2
sector size. In this mode, dm-integrity will store integrity data
directly in device's sectors and it will not use journal.

This mode improves performance and reduces flash wear because there would
be no journal writes.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

The new HAVE_PWRCTL option is defined in the PCI subsystem, so
selecting it unconditionally when PCI is disabled causes a harmless
warning:

WARNING: unmet direct dependencies detected for HAVE_PWRCTL
  Depends on [n]: PCI [=n]
  Selected by [y]:
  - ARCH_QCOM [=y]

Add 'if PCI' in the qualcomm platform to hide the warning.

Fixes: ed70aaac ("Kconfig: reduce the amount of power sequencing noise")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Add sys_uretprobe entry to scripts/syscall.tbl as same as
arch/x86/entry/syscalls/syscall_64.tbl.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20240719102824.1e086a40@canb.auug.org.au/
Fixes: 63ded110 ("uprobe: Change uretprobe syscall scope and number")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Pull bcachefs updates from Kent Overstreet:

 - Metadata version 1.8: Stripe sectors accounting, BCH_DATA_unstriped

   This splits out the accounting of dirty sectors and stripe sectors in
   alloc keys; this lets us see stripe buckets that still have unstriped
   data in them.

   This is needed for ensuring that erasure coding is working correctly,
   as well as completing stripe creation after a crash.

 - Metadata version 1.9: Disk accounting rewrite

   The previous disk accounting scheme relied heavily on percpu counters
   that were also sharded by outstanding journal buffer; it was fast but
   not extensible or scalable, and meant that all accounting counters
   were recorded in every journal entry.

   The new disk accounting scheme stores accounting as normal btree
   keys; updates are deltas until they are flushed by the btree write
   buffer.

   This means we have no practical limit on the number of counters, and
   a new tagged union format that's easy to extend.

   We now have counters for compression type/ratio, per-snapshot-id
   usage, per-btree-id usage, and pending rebalance work.

 - Self healing on read IO/checksum error

   Data is now automatically rewritten if we get a read error and then a
   successful retry

 - Mount API conversion (thanks to Thomas Bertschinger)

 - Better lockdep coverage

   Previously, btree node locks were tracked individually by lockdep,
   like any other lock. But we may take _many_ btree node locks
   simultaneously, we easily blow through the limit of 48 locks that
   lockdep can track, leading to lockdep turning itself off.

   Tracking each btree node lock individually isn't really necessary
   since we have our own cycle detector for deadlock avoidance and
   centralized tracking of btree node locks, so we now have a single
   lockdep_map in btree_trans for "any btree nodes are locked".

 - Some more small incremental work towards online check_allocations

 - Lots more debugging improvements

 - Fixes, including:
    - undefined behaviour fixes, originally noted as breaking userspace
      LTO builds
    - fix a spurious warning in fsck_err, reported by Marcin
    - fix an integer overflow on trans->nr_updates, also reported by
      Marcin; this broke during deletion of highly fragmented indirect
      extents

* tag 'bcachefs-2024-07-18.2' of https://evilpiepirate.org/git/bcachefs: (120 commits)
  lockdep: Add comments for lockdep_set_no{validate,track}_class()
  bcachefs: Fix integer overflow on trans->nr_updates
  bcachefs: silence silly kdoc warning
  bcachefs: Fix fsck warning about btree_trans not passed to fsck error
  bcachefs: Add an error message for insufficient rw journal devs
  bcachefs: varint: Avoid left-shift of a negative value
  bcachefs: darray: Don't pass NULL to memcpy()
  bcachefs: Kill bch2_assert_btree_nodes_not_locked()
  bcachefs: Rename BCH_WRITE_DONE -> BCH_WRITE_SUBMITTED
  bcachefs: __bch2_read(): call trans_begin() on every loop iter
  bcachefs: show none if label is not set
  bcachefs: drop packed, aligned from bkey_inode_buf
  bcachefs: btree node scan: fall back to comparing by journal seq
  bcachefs: Add lockdep support for btree node locks
  lockdep: lockdep_set_notrack_class()
  bcachefs: Improve copygc_wait_to_text()
  bcachefs: Convert clock code to u64s
  bcachefs: Improve startup message
  bcachefs: Self healing on read IO error
  bcachefs: Make read_only a mount option again, but hidden
  ...

Pull NFS client updates from Anna Schumaker:
 "New Features:
   - Add support for large folios
   - Implement rpcrdma generic device removal notification
   - Add client support for attribute delegations
   - Use a LAYOUTRETURN during reboot recovery to report layoutstats
     and errors
   - Improve throughput for random buffered writes
   - Add NVMe support to pnfs/blocklayout

  Bugfixes:
   - Fix rpcrdma_reqs_reset()
   - Avoid soft lockups when using UDP
   - Fix an nfs/blocklayout premature PR key unregestration
   - Another fix for EXCHGID4_FLAG_USE_PNFS_DS for DS server
   - Do not extend writes to the entire folio
   - Pass explicit offset and count values to tracepoints
   - Fix a race to wake up sleeping SUNRPC sync tasks
   - Fix gss_status tracepoint output

  Cleanups:
   - Add missing MODULE_DESCRIPTION() macros
   - Add blocklayout / SCSI layout tracepoints
   - Remove asm-generic headers from xprtrdma verbs.c
   - Remove unused 'struct mnt_fhstatus'
   - Other delegation related cleanups
   - Other folio related cleanups
   - Other pNFS related cleanups
   - Other xprtrdma cleanups"

* tag 'nfs-for-6.11-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (63 commits)
  SUNRPC: Fixup gss_status tracepoint error output
  SUNRPC: Fix a race to wake a sync task
  nfs: split nfs_read_folio
  nfs: pass explicit offset/count to trace events
  nfs: do not extend writes to the entire folio
  nfs/blocklayout: add support for NVMe
  nfs: remove nfs_page_length
  nfs: remove the unused max_deviceinfo_size field from struct pnfs_layoutdriver_type
  nfs: don't reuse partially completed requests in nfs_lock_and_join_requests
  nfs: move nfs_wait_on_request to write.c
  nfs: fold nfs_page_group_lock_subrequests into nfs_lock_and_join_requests
  nfs: fold nfs_folio_find_and_lock_request into nfs_lock_and_join_requests
  nfs: simplify nfs_folio_find_and_lock_request
  nfs: remove nfs_folio_private_request
  nfs: remove dead code for the old swap over NFS implementation
  NFSv4.1 another fix for EXCHGID4_FLAG_USE_PNFS_DS for DS server
  nfs: Block on write congestion
  nfs: Properly initialize server->writeback
  nfs: Drop pointless check from nfs_commit_release_pages()
  nfs/blocklayout: SCSI layout trace points for reservation key reg/unreg
  ...

Pull ext4 updates from Ted Ts'o:
 "Many cleanups and bug fixes in ext4, especially for the fast commit
  feature.

  Also some performance improvements; in particular, improving IOPS and
  throughput on fast devices running Async Direct I/O by up to 20% by
  optimizing jbd2_transaction_committed()"

* tag 'ext4_for_linus-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits)
  ext4: make sure the first directory block is not a hole
  ext4: check dot and dotdot of dx_root before making dir indexed
  ext4: sanity check for NULL pointer after ext4_force_shutdown
  jbd2: increase maximum transaction size
  jbd2: drop pointless shrinker batch initialization
  jbd2: avoid infinite transaction commit loop
  jbd2: precompute number of transaction descriptor blocks
  jbd2: make jbd2_journal_get_max_txn_bufs() internal
  jbd2: avoid mount failed when commit block is partial submitted
  ext4: avoid writing unitialized memory to disk in EA inodes
  ext4: don't track ranges in fast_commit if inode has inlined data
  ext4: fix possible tid_t sequence overflows
  ext4: use ext4_update_inode_fsync_trans() helper in inode creation
  ext4: add missing MODULE_DESCRIPTION()
  jbd2: add missing MODULE_DESCRIPTION()
  ext4: use memtostr_pad() for s_volume_name
  jbd2: speed up jbd2_transaction_committed()
  ext4: make ext4_da_map_blocks() buffer_head unaware
  ext4: make ext4_insert_delayed_block() insert multi-blocks
  ext4: factor out a helper to check the cluster allocation state
  ...

Pull vfs fixes from Christian Brauner:

 - Fix a missing rcu_read_unlock() in nsfs by switching to a cleanup
   guard

 - Add missing module descriptor for adfs

* tag 'vfs-6.11-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  nsfs: use cleanup guard
  fs/adfs: add MODULE_DESCRIPTION

Pull documentation updates from Jonathan Corbet:
 "Nothing hugely exciting happening in the documentation tree this time
  around, mostly more of the usual:

   - More Spanish, Italian, and Chinese translations

   - A new script, scripts/checktransupdate.py, can be used to see which
     commits have touched an (English) document since a given
     translation was last updated.

   - A couple of "best practices" suggestions (on Link: tags and
     off-list discussions) that were not entirely at consensus level,
     but I concluded they were close enough to accept.

   - Some nice cleanups removing documentation for kernel parameters
     that have not been recognized for ... a long time.

  ...along with the usual updates, typo fixes, and such"

* tag 'docs-6.11' of git://git.lwn.net/linux: (57 commits)
  Documentation: Document user_events ioctl code
  docs/pinctrl: fix typo in mapping example
  docs: maintainer: discourage taking conversations off-list
  docs: driver-model: platform: update the definition of platform_driver
  docs/sp_SP: Add translation for scheduler/sched-design-CFS.rst
  writing_musb_glue_layer.rst: Fix broken URL
  zh_CN/admin-guide: one typo fix
  docs/zh_CN/virt: Update the translation of guest-halt-polling.rst
  Documentation: add reference from dynamic debug to loglevel kernel params
  Documentation: best practices for using Link trailers
  Documentation: fix links to mailing list services
  Documentation: exception-tables.rst: Fix the wrong steps referenced
  docs/zh_CN: add process/researcher-guidelines Chinese translation
  Documentation/tools/rv: fix document header
  docs/sp_SP: Add translation of process/maintainer-kvm-x86.rst
  docs/admin-guide/mm: correct typo 'quired' to 'queried'
  Add libps2 to the input section of driver-api
  Docs/mm/index: move allocation profiling document to unsorted documents chapter
  Docs/mm/index: rename 'Legacy Documentation' to 'Unsorted Documentation'
  Docs/mm/index: Remove 'Memory Management Guide' chapter marker
  ...

Merge tag 'sparc-for-6.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc

Pull sparc updates from Andreas Larsson:

 - Add MODULE_DESCRIPTION for a number of sbus drivers

 - Fix linking error for large sparc32 kernels

 - Fix incorrect functions signature and prototype warnings for sparc64

* tag 'sparc-for-6.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc:
  sparc64: Fix prototype warnings in hibernate.c
  sparc64: Fix prototype warning for prom_get_mmu_ihandle
  sparc64: Fix incorrect function signature and add prototype for prom_cif_init
  sparc64: Fix prototype warnings for floppy_64.h
  sparc32: Fix truncated relocation errors when linking large kernels
  sbus: add missing MODULE_DESCRIPTION() macros

Pull s390 updates from Vasily Gorbik:

 - Remove restrictions on PAI NNPA and crypto counters, enabling
   concurrent per-task and system-wide sampling and counting events

 - Switch to GENERIC_CPU_DEVICES by setting up the CPU present mask in
   the architecture code and letting the generic code handle CPU
   bring-up

 - Add support for the diag204 busy indication facility to prevent
   undesirable blocking during hypervisor logical CPU utilization
   queries. Implement results caching

 - Improve the handling of Store Data SCLP events by suppressing
   unnecessary warning, preventing buffer release in I/O during
   failures, and adding timeout handling for Store Data requests to
   address potential firmware issues

 - Provide optimized __arch_hweight*() implementations

 - Remove the unnecessary CPU KOBJ_CHANGE uevents generated during
   topology updates, as they are unused and also not present on other
   architectures

 - Cleanup atomic_ops, optimize __atomic_set() for small values and
   __atomic_cmpxchg_bool() for compilers supporting flag output
   constraint

 - Couple of cleanups for KVM:
     - Move and improve KVM struct definitions for DAT tables from
       gaccess.c to a new header
     - Pass the asce as parameter to sie64a()

 - Make the crdte() and cspg() page table handling wrappers return a
   boolean to indicate success, like the other existing "compare and
   swap" wrappers

 - Add documentation for HWCAP flags

 - Switch to obtaining total RAM pages from memblock instead of
   totalram_pages() during mm init, to ensure correct calculation of
   zero page size, when defer_init is enabled

 - Refactor lowcore access and switch to using the get_lowcore()
   function instead of the S390_lowcore macro

 - Cleanups for PG_arch_1 and folio handling in UV and hugetlb code

 - Add missing MODULE_DESCRIPTION() macros

 - Fix VM_FAULT_HWPOISON handling in do_exception()

* tag 's390-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (54 commits)
  s390/mm: Fix VM_FAULT_HWPOISON handling in do_exception()
  s390/kvm: Move bitfields for dat tables
  s390/entry: Pass the asce as parameter to sie64a()
  s390/sthyi: Use cached data when diag is busy
  s390/sthyi: Move diag operations
  s390/hypfs_diag: Diag204 busy loop
  s390/diag: Add busy-indication-facility requirements
  s390/diag: Diag204 add busy return errno
  s390/diag: Return errno's from diag204
  s390/sclp: Diag204 busy indication facility detection
  s390/atomic_ops: Make use of flag output constraint
  s390/atomic_ops: Improve __atomic_set() for small values
  s390/atomic_ops: Use symbolic names
  s390/smp: Switch to GENERIC_CPU_DEVICES
  s390/hwcaps: Add documentation for HWCAP flags
  s390/pgtable: Make crdte() and cspg() return a value
  s390/topology: Remove CPU KOBJ_CHANGE uevents
  s390/sclp: Add timeout to Store Data requests
  s390/sclp: Prevent release of buffer in I/O
  s390/sclp: Suppress unnecessary Store Data warning
  ...

Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We can't have more updates than paths, so btree_path_idx_t is the
correct type to use.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

If a btree_trans is in use it's supposed to be passed to fsck_err so
that it can be unlocked if we're waiting on userspace input; but the
btree IO paths do call fsck errors where a btree_trans exists on the
stack but it's not passed through.

But it's ok, because it's unlocked while doing IO.

Fixes: a850bde6 ("bcachefs: fsck_err() may now take a btree_trans")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This causes us to go read-only - need an error message saying why.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Shifting a negative value left is undefined.
Signed-off-by: Tavian Barnes <tavianator@tavianator.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Pull x86 percpu updates from Ingo Molnar:

 - Enable the named address spaces based percpu accessors optimization
   on all GCC versions that contain this feature, detected through a
   build-time testcase.

   This effectively enables the feature on GCC 6, GCC 7 and GCC 8
   versions.

 - Fix operand constraint modifier in __raw_cpu_write()

 - Reorganize the per-CPU headers for better readability

 - Misc cleanups and fixes

* tag 'x86-percpu-2024-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/percpu: Enable named address spaces for all capable GCC versions
  x86/percpu: Clean up <asm/percpu.h> vertical alignment details
  x86/percpu: Clean up <asm/percpu.h> a bit
  x86/percpu: Move some percpu accessors around to reduce ifdeffery
  x86/percpu: Rename percpu_stable_op() to __raw_cpu_read_stable()
  x86/percpu: Fix operand constraint modifier in __raw_cpu_write()
  x86/percpu: Introduce the __raw_cpu_read_const() macro
  x86/percpu: Unify percpu read-write accessors
  x86/percpu: Move some percpu macros around for readability
  x86/percpu: Introduce the pcpu_binary_op() macro

Pull slab updates from Vlastimil Babka:
 "The most prominent change this time is the kmem_buckets based
  hardening of kmalloc() allocations from Kees Cook.

  We have also extended the kmalloc() alignment guarantees for
  non-power-of-two sizes in a way that benefits rust.

  The rest are various cleanups and non-critical fixups.

   - Dedicated bucket allocator (Kees Cook)

     This series [1] enhances the probabilistic defense against heap
     spraying/grooming of CONFIG_RANDOM_KMALLOC_CACHES from last year.

     kmalloc() users that are known to be useful for exploits can get
     completely separate set of kmalloc caches that can't be shared with
     other users. The first converted users are alloc_msg() and
     memdup_user().

     The hardening is enabled by CONFIG_SLAB_BUCKETS.

   - Extended kmalloc() alignment guarantees (Vlastimil Babka)

     For years now we have guaranteed natural alignment for power-of-two
     allocations, but nothing was defined for other sizes (in practice,
     we have two such buckets, kmalloc-96 and kmalloc-192).

     To avoid unnecessary padding in the rust layer due to its alignment
     rules, extend the guarantee so that the alignment is at least the
     largest power-of-two divisor of the requested size.

     This fits what rust needs, is a superset of the existing
     power-of-two guarantee, and does not in practice change the layout
     (and thus does not add overhead due to padding) of the kmalloc-96
     and kmalloc-192 caches, unless slab debugging is enabled for them.

   - Cleanups and non-critical fixups (Chengming Zhou, Suren
     Baghdasaryan, Matthew Willcox, Alex Shi, and Vlastimil Babka)

     Various tweaks related to the new alloc profiling code, folio
     conversion, debugging and more leftovers after SLAB"

Link: https://lore.kernel.org/all/20240701190152.it.631-kees@kernel.org/ [1]

* tag 'slab-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  mm/memcg: alignment memcg_data define condition
  mm, slab: move prepare_slab_obj_exts_hook under CONFIG_MEM_ALLOC_PROFILING
  mm, slab: move allocation tagging code in the alloc path into a hook
  mm/util: Use dedicated slab buckets for memdup_user()
  ipc, msg: Use dedicated slab buckets for alloc_msg()
  mm/slab: Introduce kmem_buckets_create() and family
  mm/slab: Introduce kvmalloc_buckets_node() that can take kmem_buckets argument
  mm/slab: Plumb kmem_buckets into __do_kmalloc_node()
  mm/slab: Introduce kmem_buckets typedef
  slab, rust: extend kmalloc() alignment guarantees to remove Rust padding
  slab: delete useless RED_INACTIVE and RED_ACTIVE
  slab: don't put freepointer outside of object if only orig_size
  slab: make check_object() more consistent
  mm: Reduce the number of slab->folio casts
  mm, slab: don't wrap internal functions with alloc_hooks()

Pull memblock updates from Mike Rapoport:

 - 'reserve_mem' command line parameter to allow creation of named
   memory reservation at boot time.

   The driving use-case is to improve the ability of pstore to retain
   ramoops data across reboots.

 - cleanups and small improvements in memblock and mm_init

 - new tests cases in memblock test suite

* tag 'memblock-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock tests: fix implicit declaration of function 'numa_valid_node'
  memblock: Move late alloc warning down to phys alloc
  pstore/ramoops: Add ramoops.mem_name= command line option
  mm/memblock: Add "reserve_mem" to reserved named memory at boot up
  mm/mm_init.c: don't initialize page->lru again
  mm/mm_init.c: not always search next deferred_init_pfn from very beginning
  mm/mm_init.c: use deferred_init_mem_pfn_range_in_zone() to decide loop condition
  mm/mm_init.c: get the highest zone directly
  mm/mm_init.c: move nr_initialised reset down a bit
  mm/memblock: fix a typo in description of for_each_mem_region()
  mm/mm_init.c: use memblock_region_memory_base_pfn() to get startpfn
  mm/memblock: use PAGE_ALIGN_DOWN to get pgend in free_memmap
  mm/memblock: return true directly on finding overlap region
  memblock tests: add memblock_overlaps_region_checks
  mm/memblock: fix comment for memblock_isolate_range()
  memblock tests: add memblock_reserve_many_may_conflict_check()
  memblock tests: add memblock_reserve_all_locations_check()
  mm/memblock: remove empty dummy entry

Merge tag 'perf-tools-for-v6.11-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools updates from Namhyung Kim:
 "Build:

   - Build each directory as a library so that depedency check for the
     python extension module can be automatic

   - Use pkg-config to check libtraceevent and libtracefs

  perf sched:

   - Add --task-name and --fuzzy-name options for `perf sched map`

     It focuses on selected tasks only by removing unrelated tasks in
     the output. It matches the task comm with the given string and the
     --fuzzy-name option allows the partial matching:

       $ sudo perf sched record -a sleep 1

       $ sudo perf sched map --task-name kworker --fuzzy-name
          .   .   .   .   -  *A0  .   .    481065.315131 secs A0 => kworker/5:2-i91:438521
          .   .   .   .   -  *-   .   .    481065.315160 secs
         *B0  .   .   .   -   .   .   .    481065.316435 secs B0 => kworker/0:0-i91:437860
         *-   .   .   .   .   .   .   .    481065.316441 secs
          .   .   .   .   .  *A0  .   .    481065.318703 secs
          .   .   .   .   .  *-   .   .    481065.318717 secs
          .   .  *C0  .   .   .   .   .    481065.320544 secs C0 => kworker/u16:30-:430186
          .   .  *-   .   .   .   .   .    481065.320555 secs
          .   .  *D0  .   .   .   .   .    481065.328524 secs D0 => kworker/2:0-kdm:429654
         *B0  .   D0  .   -   .   .   .    481065.328527 secs
         *-   .   D0  .   -   .   .   .    481065.328535 secs
          .   .  *-   .   .   .   .   .    481065.328535 secs

   - Fix -r/--repeat option of perf sched replay

     The documentation said -1 will work as infinity but it didn't
     accept the value. Update the code and document to use 0 instead

   - Fix perf sched timehist to account the delay time for preempted
     tasks

  Perf event filtering:

   - perf top gained filtering support on regular events using BPF like
     perf record. Previously it was able to use it for tracepoints only

   - The BPF filter now supports filtering by UID/GID. This should be
     preferred than -u <UID> option as it's racy to scan /proc to check
     tasks for the user and fails to open an event for the task if it's
     already gone

       $ sudo perf top -e cycles --filter "uid == $(id -u)"

  perf report:

   - Skip dummy events in the group output by default. The --skip-empty
     option controls display of empty events without samples. But perf
     report can force display all events in a group

     In this case, auto-added a dummy event (for a system-wide record)
     ends up in the output. Now it can skip those empty events even in
     the group display mode

     To preserve the old behavior, run this:

       $ perf report --group --no-skip-empty

  perf stat:

   - Choose the most disaggregate option when multiple aggregation
     options are given. It used to pick the last option in the command
     line but it can be confusing and not consistent. Now it'll choose
     the smallest unit

     For example, it'd aggregate the result per-core when the user gave
     both --per-socket and --per-core options at the same time

  Internals:

   - Fix `perf bench` when some CPUs are offline

   - Fix handling of JIT symbol mappings to accept "/tmp/perf-${PID}.map
     patterns only so that it can not be confused by other /tmp/perf-*
     files

   - Many improvements and fixes for `perf test`

  Others:

   - Support some new instructions for Intel-PT

   - Fix syscall ID mapping in perf trace

   - Document AMD IBS PMU usages

   - Change `perf lock info` to show map and thread info by default

  Vendor JSON events:

   - Update Intel events and metrics

   - Add i.MX9[35] DDR metrics"

* tag 'perf-tools-for-v6.11-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (125 commits)
  perf trace: Fix iteration of syscall ids in syscalltbl->entries
  perf dso: Fix address sanitizer build
  perf mem: Warn if memory events are not supported on all CPUs
  perf arm-spe: Support multiple Arm SPE PMUs
  perf build x86: Fix SC2034 error in syscalltbl.sh
  perf record: Fix memset out-of-range error
  perf sched map: Add --fuzzy-name option for fuzzy matching in task names
  perf sched map: Add support for multiple task names using CSV
  perf sched map: Add task-name option to filter the output map
  perf build: Conditionally add feature check flags for libtrace{event,fs}
  perf install: Don't propagate subdir to Documentation submake
  perf vendor events arm64:: Add i.MX95 DDR Performance Monitor metrics
  perf vendor events arm64:: Add i.MX93 DDR Performance Monitor metrics
  perf dsos: When adding a dso into sorted dsos maintain the sort order
  perf comm str: Avoid sort during insert
  perf report: Calling available function for stats printing
  perf intel-pt: Fix exclude_guest setting
  perf intel-pt: Fix aux_watermark calculation for 64-bit size
  perf sched replay: Fix -r/--repeat command line option for infinity
  perf: pmus: Remove unneeded semicolon
  ...

Pull tracing CREDITS file update from Steven Rostedt:
 "Update of MAINTAINERS and CREDITS file

   - Update Daniel Bristot de Oliveira's entry in MAINTAINERS with
     respect to his tracing code.

   - Add more credits to him in CREDITS file and move his entry to be
     alphabetical"

* tag 'trace-v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Update MAINTAINERS file

Pull tracing tools updates from Steven Rostedt:
 "Trivial updates for 6.11:

   - Use pretty formatting only on interactive tty in rtla/osnoise

   - Better reporting when histogram is empty in rtla/osnoise

   - Use the correct library name for "libtracefs" in feature detection"

* tag 'trace-tools-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tools: build: use correct lib name for libtracefs feature detection
  rtla/osnoise: Better report when histogram is empty
  rtla/osnoise: Use pretty formatting only on interactive tty