- 01 Apr, 2020 1 commit
-
-
Stephen Rothwell authored
Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/r/20200401151904.6948af20@canb.auug.org.auSigned-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
- 31 Mar, 2020 3 commits
-
-
Thierry Reding authored
Currently, the of_pinctrl_get() dummy is only defined for !OF, which can still cause build failures on configurations with OF enabled but PINCTRL disabled. Make sure to define the dummy if either OF or PINCTRL are not enabled. Reported-by:
Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200330095801.2421589-1-thierry.reding@gmail.comSigned-off-by:
-
Linus Walleij authored
There is struct gpio *gc, *chip and *gpiochip, and yes I am responsible for some of the inconsistencies. I want this to be just gc everywhere for minimizing cognitive resistance when reading the code: more compact function signatures and less clutter. Purely syntactic changes intended. No semantic effects. Signed-off-by:
-
Thierry Reding authored
Do not use the struct gpio_device's .pin_ranges field if the PINCTRL Kconfig symbol is not selected to avoid build failures. Fixes: 2ab73c6d ("gpio: Support GPIO controllers without pin-ranges") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Tested-by:
-
- 27 Mar, 2020 9 commits
-
-
Geert Uytterhoeven authored
gpio_set_bias() no longer uses the passed gpio_chip pointer parameter. Remove it. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200325100439.14000-3-geert+renesas@glider.beSigned-off-by:
-
Geert Uytterhoeven authored
All callers of gpio_set_config() have to convert a gpio_desc to a gpio_chip and offset. Avoid these duplicated conversion steps by letting gpio_set_config() take a gpio_desc pointer directly. Signed-off-by:
-
Geert Uytterhoeven authored
The GPIO Aggregator will need a method to forward a .set_config() call to its parent gpiochip. This requires obtaining the gpio_chip and offset for a given gpio_desc. While gpiod_to_chip() is public, gpio_chip_hwgpio() is not, so there is currently no method to obtain the needed GPIO offset parameter. Hence introduce a public gpiod_set_config() helper, which invokes the .set_config() callback through a gpio_desc pointer, like is done for most other gpio_chip callbacks. Rewrite the existing gpiod_set_debounce() helper as a wrapper around gpiod_set_config(), to avoid duplication. Signed-off-by:
-
Linus Walleij authored
Linux 5.6-rc7
-
Anssi Hannula authored
Commit 0161a94e ("tools: gpio: Correctly add make dependencies for gpio_utils") added a make rule for gpio-utils-in.o but used $(output) instead of the correct $(OUTPUT) for the output directory, breaking out-of-tree build (O=xx) with the following error: No rule to make target 'out/tools/gpio/gpio-utils-in.o', needed by 'out/tools/gpio/lsgpio-in.o'. Stop. Fix that. Fixes: 0161a94e ("tools: gpio: Correctly add make dependencies for gpio_utils") Cc: <stable@vger.kernel.org> Cc: Laura Abbott <labbott@redhat.com> Signed-off-by:
Anssi Hannula <anssi.hannula@bitwise.fi> Link: https://lore.kernel.org/r/20200325103154.32235-1-anssi.hannula@bitwise.fiReviewed-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Use a different markup for the ERR_PTR, as %FOO doesn't work if there are parenthesis. So, use, instead: ``ERR_PTR(-EINVAL)`` This fixes the following warning: ./drivers/gpio/gpiolib.c:139: WARNING: Inline literal start-string without end-string. Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/51197e3568f073e22c280f0584bfa20b44436708.1584456635.git.mchehab+huawei@kernel.orgReviewed-by:
-
Thierry Reding authored
The GG.0 and GG.1 GPIOs serve as CLKREQ and RST pins, respectively, for PCIe controller 5 on Tegra194. When this controller is configured in endpoint mode, these pins need to be used as GPIOs by the PCIe endpoint driver. Typically the mode programming of these pins (GPIO vs. SFIO) is performed by early boot firmware to ensure that the configuration is consistent. However, the GG.0 and GG.1 pins are part of a special power partition that is not enabled during early boot, and hence the early boot firmware cannot program these pins to be GPIOs (they are SFIO by default). Adding them as pin ranges for the pin controller allows the pin controller to be involved when these pins are requested as GPIOs and allows the proper programming to take place. Signed-off-by:
Vidya Sagar <vidyas@nvidia.com> Signed-off-by:
-
Thierry Reding authored
Add support for Tegra SoC generations to specify a list of pin ranges that map GPIOs to ranges of pins in the pin controller. Signed-off-by:
-
Thierry Reding authored
Wake gpiochip_generic_request() call into the pinctrl helpers only if a GPIO controller had any pin-ranges assigned to it. This allows a driver to unconditionally use this helper if it supports multiple devices of which only a subset have pin-ranges assigned to them. Signed-off-by:
-
- 26 Mar, 2020 1 commit
-
-
Geert Uytterhoeven authored
impd1_probe() fills in the GPIO lookup table by manually populating an array of gpiod_lookup structures. Use the existing GPIO_LOOKUP() helper macro instead, to relax a dependency on the gpiod_lookup structure's member names. Signed-off-by:
-
- 25 Mar, 2020 15 commits
-
-
Doug Berger authored
The default handling of the gpio-line-names property by the gpiolib-of implementation does not work with the multiple gpiochip banks per device structure used by the gpio-brcmstb driver. This commit adds driver level support for the device tree property so that GPIO lines can be assigned friendly names. Signed-off-by:
Doug Berger <opendmb@gmail.com> Link: https://lore.kernel.org/r/1583780521-45702-1-git-send-email-opendmb@gmail.comAcked-by:
Gregory Fong <gregory.0xf0@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Linus Walleij authored
Merge tag 'gpio-updates-for-v5.7-part4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel gpio updates for v5.7 part 4 - improve comments in the uapi header - fix documentation issues - add a warning to gpio-pl061 when the IRQ line is not configured - allow building gpio-mxc and gpio-mxs with COMPILE_TEST enabled - don't print an error message when an optional IRQ is missing in gpio-mvebu - fix a potential segfault in gpio-hammer - fix a couple typos and coding style issues in gpio tools - provide a new flag in gpio-mmio and use it in mt7621 to fix an issue with the controller ignoring value setting when a GPIO is in input mode - slightly refactor gpio_name_to_desc()
-
Mykyta Poturai authored
Replace COMSUMER with proper CONSUMER Signed-off-by:
Mykyta Poturai <mykyta.poturai@gmail.com> Signed-off-by:
-
Gabriel Ravier authored
"retain good changes" means that I left the help string split up instead of having this weird thing where it tries to merge together the last three lines and it looks **really** bad Signed-off-by:
Gabriel Ravier <gabravier@gmail.com> Signed-off-by:
-
Michał Mirosław authored
Since name == NULL can't ever match, move the check out of IRQ-disabled region. Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in an error message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Chuanhong Guo authored
DSET/DCLR registers only works on output pins. Add corresponding BGPIOF_NO_SET_ON_INPUT flag to bgpio_init call to fix direction_out behavior. Signed-off-by:
Chuanhong Guo <gch981213@gmail.com> Tested-by:
René van Dorst <opensource@vdorst.com> Reviewed-by:
Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by:
-
Chuanhong Guo authored
Some gpio controllers ignores pin value writing when that pin is configured as input mode. As a result, bgpio_dir_out should set pin to output before configuring pin values or gpio pin values can't be set up properly. Introduce two variants of bgpio_dir_out: bgpio_dir_out_val_first and bgpio_dir_out_dir_first, and assign direction_output according to a new flag: BGPIOF_NO_SET_ON_INPUT. Signed-off-by:
-
Gabriel Ravier authored
If '-o' was used more than 64 times in a single invocation of gpio-hammer, this could lead to an overflow of the 'lines' array. This commit fixes this by avoiding the overflow and giving a proper diagnostic back to the user Signed-off-by:
-
Chris Packham authored
platform_get_irq() will generate an error message if the requested irq is not present mvebu-gpio f1010140.gpio: IRQ index 3 not found use platform_get_irq_optional() to avoid the error message being generated. Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Anson Huang authored
Add COMPILE_TEST support to GPIO_MXS driver for better compile testing coverage. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Reported-by:
-
Anson Huang authored
Add COMPILE_TEST support to GPIO_MXC driver for better compile testing coverage. Signed-off-by:
-
Alexander Sverdlin authored
Existing (irq < 0) condition is always false because adev->irq has unsigned type and contains 0 in case of failed irq_of_parse_and_map(). Up to now all the mapping errors were silently ignored. Seems that repairing this check would be backwards-incompatible and might break the probe() for the implementations without IRQ support. Therefore warn the user instead. Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Two literal blocks there are marked with both "::" and .. code-block:: c This causes Sphinx (2.4.1) to do the wrong thing, causing lots of warnings: Documentation/driver-api/gpio/driver.rst:425: WARNING: Unexpected indentation. Documentation/driver-api/gpio/driver.rst:423: WARNING: Inline emphasis start-string without end-string. Documentation/driver-api/gpio/driver.rst:427: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/driver-api/gpio/driver.rst:429: WARNING: Inline emphasis start-string without end-string. Documentation/driver-api/gpio/driver.rst:429: WARNING: Inline emphasis start-string without end-string. Documentation/driver-api/gpio/driver.rst:429: WARNING: Inline emphasis start-string without end-string. Documentation/driver-api/gpio/driver.rst:433: WARNING: Inline emphasis start-string without end-string. Documentation/driver-api/gpio/driver.rst:446: WARNING: Unexpected indentation. Documentation/driver-api/gpio/driver.rst:440: WARNING: Inline emphasis start-string without end-string. Documentation/driver-api/gpio/driver.rst:440: WARNING: Inline emphasis start-string without end-string. Documentation/driver-api/gpio/driver.rst:447: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/driver-api/gpio/driver.rst:449: WARNING: Definition list ends without a blank line; unexpected unindent. Documentation/driver-api/gpio/driver.rst:462: WARNING: Unexpected indentation. Documentation/driver-api/gpio/driver.rst:460: WARNING: Inline emphasis start-string without end-string. Documentation/driver-api/gpio/driver.rst:462: WARNING: Inline emphasis start-string without end-string. Documentation/driver-api/gpio/driver.rst:465: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/driver-api/gpio/driver.rst:467: WARNING: Inline emphasis start-string without end-string. Documentation/driver-api/gpio/driver.rst:467: WARNING: Inline emphasis start-string without end-string. Documentation/driver-api/gpio/driver.rst:467: WARNING: Inline emphasis start-string without end-string. Documentation/driver-api/gpio/driver.rst:471: WARNING: Inline emphasis start-string without end-string. Documentation/driver-api/gpio/driver.rst:478: WARNING: Inline emphasis start-string without end-string. Signed-off-by: -
Jonathan Neuschäfer authored
Character arrays can be considered empty strings (if they are immediately terminated), but they cannot be NULL. Signed-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by:
-
- 23 Mar, 2020 1 commit
-
-
Linus Torvalds authored
-
- 22 Mar, 2020 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "Two fixes. The first is a regression: when dropping some incompat bits the conditions were reversed. The other is a fix for rename whiteout potentially leaving stack memory linked to a list" * tag 'for-5.6-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix removal of raid[56|1c34} incompat flags after removing block group btrfs: fix log context list corruption after rename whiteout error
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "10 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: x86/mm: split vmalloc_sync_all() mm, slub: prevent kmalloc_node crashes and memory leaks mm/mmu_notifier: silence PROVE_RCU_LIST warnings epoll: fix possible lost wakeup on epoll_ctl() path mm: do not allow MADV_PAGEOUT for CoW pages mm, memcg: throttle allocators based on ancestral memory.high mm, memcg: fix corruption on 64-bit divisor in memory.high throttling page-flags: fix a crash at SetPageError(THP_SWAP) mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case memcg: fix NULL pointer dereference in __mem_cgroup_usage_unregister_event
-
Joerg Roedel authored
Commit 3f8fd02b ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()") introduced a call to vmalloc_sync_all() in the vunmap() code-path. While this change was necessary to maintain correctness on x86-32-pae kernels, it also adds additional cycles for architectures that don't need it. Specifically on x86-64 with CONFIG_VMAP_STACK=y some people reported severe performance regressions in micro-benchmarks because it now also calls the x86-64 implementation of vmalloc_sync_all() on vunmap(). But the vmalloc_sync_all() implementation on x86-64 is only needed for newly created mappings. To avoid the unnecessary work on x86-64 and to gain the performance back, split up vmalloc_sync_all() into two functions: * vmalloc_sync_mappings(), and * vmalloc_sync_unmappings() Most call-sites to vmalloc_sync_all() only care about new mappings being synchronized. The only exception is the new call-site added in the above mentioned commit. Shile Zhang directed us to a report of an 80% regression in reaim throughput. Fixes: 3f8fd02b ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()") Reported-by:
kernel test robot <oliver.sang@intel.com> Reported-by:
Shile Zhang <shile.zhang@linux.alibaba.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Tested-by:
Borislav Petkov <bp@suse.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [GHES] Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20191009124418.8286-1-joro@8bytes.org Link: https://lists.01.org/hyperkitty/list/lkp@lists.01.org/thread/4D3JPPHBNOSPFK2KEPC6KGKS6J25AIDB/ Link: http://lkml.kernel.org/r/20191113095530.228959-1-shile.zhang@linux.alibaba.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Vlastimil Babka authored
Sachin reports [1] a crash in SLUB __slab_alloc(): BUG: Kernel NULL pointer dereference on read at 0x000073b0 Faulting instruction address: 0xc0000000003d55f4 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 19 PID: 1 Comm: systemd Not tainted 5.6.0-rc2-next-20200218-autotest #1 NIP: c0000000003d55f4 LR: c0000000003d5b94 CTR: 0000000000000000 REGS: c0000008b37836d0 TRAP: 0300 Not tainted (5.6.0-rc2-next-20200218-autotest) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24004844 XER: 00000000 CFAR: c00000000000dec4 DAR: 00000000000073b0 DSISR: 40000000 IRQMASK: 1 GPR00: c0000000003d5b94 c0000008b3783960 c00000000155d400 c0000008b301f500 GPR04: 0000000000000dc0 0000000000000002 c0000000003443d8 c0000008bb398620 GPR08: 00000008ba2f0000 0000000000000001 0000000000000000 0000000000000000 GPR12: 0000000024004844 c00000001ec52a00 0000000000000000 0000000000000000 GPR16: c0000008a1b20048 c000000001595898 c000000001750c18 0000000000000002 GPR20: c000000001750c28 c000000001624470 0000000fffffffe0 5deadbeef0000122 GPR24: 0000000000000001 0000000000000dc0 0000000000000002 c0000000003443d8 GPR28: c0000008b301f500 c0000008bb398620 0000000000000000 c00c000002287180 NIP ___slab_alloc+0x1f4/0x760 LR __slab_alloc+0x34/0x60 Call Trace: ___slab_alloc+0x334/0x760 (unreliable) __slab_alloc+0x34/0x60 __kmalloc_node+0x110/0x490 kvmalloc_node+0x58/0x110 mem_cgroup_css_online+0x108/0x270 online_css+0x48/0xd0 cgroup_apply_control_enable+0x2ec/0x4d0 cgroup_mkdir+0x228/0x5f0 kernfs_iop_mkdir+0x90/0xf0 vfs_mkdir+0x110/0x230 do_mkdirat+0xb0/0x1a0 system_call+0x5c/0x68 This is a PowerPC platform with following NUMA topology: available: 2 nodes (0-1) node 0 cpus: node 0 size: 0 MB node 0 free: 0 MB node 1 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 node 1 size: 35247 MB node 1 free: 30907 MB node distances: node 0 1 0: 10 40 1: 40 10 possible numa nodes: 0-31 This only happens with a mmotm patch "mm/memcontrol.c: allocate shrinker_map on appropriate NUMA node" [2] which effectively calls kmalloc_node for each possible node. SLUB however only allocates kmem_cache_node on online N_NORMAL_MEMORY nodes, and relies on node_to_mem_node to return such valid node for other nodes since commit a561ce00 ("slub: fall back to node_to_mem_node() node if allocating on memoryless node"). This is however not true in this configuration where the _node_numa_mem_ array is not initialized for nodes 0 and 2-31, thus it contains zeroes and get_partial() ends up accessing non-allocated kmem_cache_node. A related issue was reported by Bharata (originally by Ramachandran) [3] where a similar PowerPC configuration, but with mainline kernel without patch [2] ends up allocating large amounts of pages by kmalloc-1k kmalloc-512. This seems to have the same underlying issue with node_to_mem_node() not behaving as expected, and might probably also lead to an infinite loop with CONFIG_SLUB_CPU_PARTIAL [4]. This patch should fix both issues by not relying on node_to_mem_node() anymore and instead simply falling back to NUMA_NO_NODE, when kmalloc_node(node) is attempted for a node that's not online, or has no usable memory. The "usable memory" condition is also changed from node_present_pages() to N_NORMAL_MEMORY node state, as that is exactly the condition that SLUB uses to allocate kmem_cache_node structures. The check in get_partial() is removed completely, as the checks in ___slab_alloc() are now sufficient to prevent get_partial() being reached with an invalid node. [1] https://lore.kernel.org/linux-next/3381CD91-AB3D-4773-BA04-E7A072A63968@linux.vnet.ibm.com/ [2] https://lore.kernel.org/linux-mm/fff0e636-4c36-ed10-281c-8cdb0687c839@virtuozzo.com/ [3] https://lore.kernel.org/linux-mm/20200317092624.GB22538@in.ibm.com/ [4] https://lore.kernel.org/linux-mm/088b5996-faae-8a56-ef9c-5b567125ae54@suse.cz/ Fixes: a561ce00 ("slub: fall back to node_to_mem_node() node if allocating on memoryless node") Reported-by:Sachin Sant <sachinp@linux.vnet.ibm.com> Reported-by:
PUVICHAKRAVARTHY RAMACHANDRAN <puvichakravarthy@in.ibm.com> Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
Bharata B Rao <bharata@linux.ibm.com> Reviewed-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Christopher Lameter <cl@linux.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Nathan Lynch <nathanl@linux.ibm.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200320115533.9604-1-vbabka@suse.czDebugged-by:
-
Qian Cai authored
It is safe to traverse mm->notifier_subscriptions->list either under SRCU read lock or mm->notifier_subscriptions->lock using hlist_for_each_entry_rcu(). Silence the PROVE_RCU_LIST false positives, for example, WARNING: suspicious RCU usage ----------------------------- mm/mmu_notifier.c:484 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by libvirtd/802: #0: ffff9321e3f58148 (&mm->mmap_sem#2){++++}, at: do_mprotect_pkey+0xe1/0x3e0 #1: ffffffff91ae6160 (mmu_notifier_invalidate_range_start){+.+.}, at: change_p4d_range+0x5fa/0x800 #2: ffffffff91ae6e08 (srcu){....}, at: __mmu_notifier_invalidate_range_start+0x178/0x460 stack backtrace: CPU: 7 PID: 802 Comm: libvirtd Tainted: G I 5.6.0-rc6-next-20200317+ #2 Hardware name: HP ProLiant BL460c Gen8, BIOS I31 11/02/2014 Call Trace: dump_stack+0xa4/0xfe lockdep_rcu_suspicious+0xeb/0xf5 __mmu_notifier_invalidate_range_start+0x3ff/0x460 change_p4d_range+0x746/0x800 change_protection+0x1df/0x300 mprotect_fixup+0x245/0x3e0 do_mprotect_pkey+0x23b/0x3e0 __x64_sys_mprotect+0x51/0x70 do_syscall_64+0x91/0xae8 entry_SYSCALL_64_after_hwframe+0x49/0xb3 Signed-off-by:Qian Cai <cai@lca.pw> Signed-off-by:
Paul E. McKenney <paulmck@kernel.org> Reviewed-by:
Jason Gunthorpe <jgg@mellanox.com> Link: http://lkml.kernel.org/r/20200317175640.2047-1-cai@lca.pwSigned-off-by:
-
Roman Penyaev authored
This fixes possible lost wakeup introduced by commit a218cc49. Originally modifications to ep->wq were serialized by ep->wq.lock, but in commit a218cc49 ("epoll: use rwlock in order to reduce ep_poll_callback() contention") a new rw lock was introduced in order to relax fd event path, i.e. callers of ep_poll_callback() function. After the change ep_modify and ep_insert (both are called on epoll_ctl() path) were switched to ep->lock, but ep_poll (epoll_wait) was using ep->wq.lock on wqueue list modification. The bug doesn't lead to any wqueue list corruptions, because wake up path and list modifications were serialized by ep->wq.lock internally, but actual waitqueue_active() check prior wake_up() call can be reordered with modifications of ep ready list, thus wake up can be lost. And yes, can be healed by explicit smp_mb(): list_add_tail(&epi->rdlink, &ep->rdllist); smp_mb(); if (waitqueue_active(&ep->wq)) wake_up(&ep->wp); But let's make it simple, thus current patch replaces ep->wq.lock with the ep->lock for wqueue modifications, thus wake up path always observes activeness of the wqueue correcty. Fixes: a218cc49 ("epoll: use rwlock in order to reduce ep_poll_callback() contention") Reported-by:
Max Neunhoeffer <max@arangodb.com> Signed-off-by:
Roman Penyaev <rpenyaev@suse.de> Signed-off-by:
-
Michal Hocko authored
Jann has brought up a very interesting point [1]. While shared pages are excluded from MADV_PAGEOUT normally, CoW pages can be easily reclaimed that way. This can lead to all sorts of hard to debug problems. E.g. performance problems outlined by Daniel [2]. There are runtime environments where there is a substantial memory shared among security domains via CoW memory and a easy to reclaim way of that memory, which MADV_{COLD,PAGEOUT} offers, can lead to either performance degradation in for the parent process which might be more privileged or even open side channel attacks. The feasibility of the latter is not really clear to me TBH but there is no real reason for exposure at this stage. It seems there is no real use case to depend on reclaiming CoW memory via madvise at this stage so it is much easier to simply disallow it and this is what this patch does. Put it simply MADV_{PAGEOUT,COLD} can operate only on the exclusively owned memory which is a straightforward semantic. [1] http://lkml.kernel.org/r/CAG48ez0G3JkMq61gUmyQAaCq=_TwHbi1XKzWRooxZkv08PQKuw@mail.gmail.com [2] http://lkml.kernel.org/r/CAKOZueua_v8jHCpmEtTB6f3i9e2YnmX4mqdYVWhV4E=Z-n+zRQ@mail.gmail.com Fixes: 9c276cc6 ("mm: introduce MADV_COLD") Reported-by:Jann Horn <jannh@google.com> Signed-off-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
Chris Down authored
Prior to this commit, we only directly check the affected cgroup's memory.high against its usage. However, it's possible that we are being reclaimed as a result of hitting an ancestor memory.high and should be penalised based on that, instead. This patch changes memory.high overage throttling to use the largest overage in its ancestors when considering how many penalty jiffies to charge. This makes sure that we penalise poorly behaving cgroups in the same way regardless of at what level of the hierarchy memory.high was breached. Fixes: 0e4b01df ("mm, memcg: throttle allocators when failing reclaim over memory.high") Reported-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
Chris Down <chris@chrisdown.name> Signed-off-by:
-
Chris Down authored
Commit 0e4b01df had a bunch of fixups to use the right division method. However, it seems that after all that it still wasn't right -- div_u64 takes a 32-bit divisor. The headroom is still large (2^32 pages), so on mundane systems you won't hit this, but this should definitely be fixed. Fixes: 0e4b01df ("mm, memcg: throttle allocators when failing reclaim over memory.high") Reported-by:
-
Qian Cai authored
Commit bd4c82c2 ("mm, THP, swap: delay splitting THP after swapped out") supported writing THP to a swap device but forgot to upgrade an older commit df8c94d1 ("page-flags: define behavior of FS/IO-related flags on compound pages") which could trigger a crash during THP swapping out with DEBUG_VM_PGFLAGS=y, kernel BUG at include/linux/page-flags.h:317! page dumped because: VM_BUG_ON_PAGE(1 && PageCompound(page)) page:fffff3b2ec3a8000 refcount:512 mapcount:0 mapping:000000009eb0338c index:0x7f6e58200 head:fffff3b2ec3a8000 order:9 compound_mapcount:0 compound_pincount:0 anon flags: 0x45fffe0000d8454(uptodate|lru|workingset|owner_priv_1|writeback|head|reclaim|swapbacked) end_swap_bio_write() SetPageError(page) VM_BUG_ON_PAGE(1 && PageCompound(page)) <IRQ> bio_endio+0x297/0x560 dec_pending+0x218/0x430 [dm_mod] clone_endio+0xe4/0x2c0 [dm_mod] bio_endio+0x297/0x560 blk_update_request+0x201/0x920 scsi_end_request+0x6b/0x4b0 scsi_io_completion+0x509/0x7e0 scsi_finish_command+0x1ed/0x2a0 scsi_softirq_done+0x1c9/0x1d0 __blk_mqnterrupt+0xf/0x20 </IRQ> Fix by checking PF_NO_TAIL in those places instead. Fixes: bd4c82c2 ("mm, THP, swap: delay splitting THP after swapped out") Signed-off-by:
David Hildenbrand <david@redhat.com> Acked-by:
"Huang, Ying" <ying.huang@intel.com> Acked-by:
Rafael Aquini <aquini@redhat.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200310235846.1319-1-cai@lca.pwSigned-off-by:
-
