Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>

This allow to remove ~30 lines of code.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>

eeepc_wmi_get_devstate returns an acpi_status, so each
call need extra logic to handle the return code. This
patch add a simple getter, returning a boolean (or a
negative error code).
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>

\AMW0.WMBC, which is the main method that we use,
is not reentrant. When wireless hotpluging is enabled,
toggling the status of the wireless device using WMBC will
trigger a notification and the notification handler need to
call WMBC again to get the new status of the device, this
will trigger the following error:

ACPI Error (dswload-0802): [_T_0] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20100428/psloop-231)
ACPI Error (psparse-0537): Method parse/execution failed [\AMW0.WMBC] (Node f7023b88), AE_ALREADY_EXISTS
ACPI: Marking method WMBC as Serialized because of AE_ALREADY_EXISTS error

Since there is currently no way to tell the acpi subsystem to mark
a method as serialized, we do it in eeepc-wmi.

Of course, we could let the first call fail, and then it would work,
but it doesn't seems really clean, and it will make the first
WMBC call return a random value.

This patch was tested on EeePc 1000H with a RaLink RT2860
wireless card using the rt2800pci driver. rt2860sta driver
seems to deadlock when we remove the pci device...
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>

Implement wireless like hotplug handling (code stolen from eeepc-laptop).

Reminder: on some models rfkill is implemented by logically unplugging the
wireless card from the PCI bus. Despite sending ACPI notifications, this does
not appear to be implemented using standard ACPI hotplug - nor does the
firmware provide the _OSC method required to support native PCIe hotplug.
The only sensible choice appears to be to handle the hotplugging directly in
the platform driver.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>

The OLPC XO-1.5 has an ebook switch, triggered when the laptop
screen is rotated then folding down, converting the device into ebook
form.

This switch is exposed through ACPI. Add a driver that exposes it
to userspace as an input device.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
  regulator: Add MODULE_DEVICE_TABLE to max8997 and max8998
  regulator: fix tps6524x section mismatch
  regulator: Remove more wm831x-specific IRQ operations
  regulator: add ab8500 enable and raise time delays
  regulator: provide consumer interface for fall/rise time
  regulator: add set_voltage_time_sel infrastructure
  regulator: initialization for ab8500 regulators
  regulator: add support for USB voltage regulator
  regulator: switch the ab3100 to use enable_time()
  Regulator: add suspend-finish API for regulator core.
  regulator: fix typo in Kconfig
  regulator: Convert WM831x regulators to genirq
  regulator: If we fail when setting up a supply say which supply

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: Fix yet another race in disconnection
  ALSA: asihpi - Update verbose debug print macros
  ALSA: asihpi - Improve non-busmaster adapter operation
  ALSA: asihpi - Support single-rate no-SRC cards
  ALSA: HDA: New AD1984A model for Dell Precision R5500
  ALSA: vmalloc buffers should use normal mmap
  ALSA: hda - Fix SPDIF out regression on ALC889
  ALSA: usb-audio - Support for Boss JS-8 Jam Station
  ALSA: usb-audio: add Cakewalk UM-1G support
  sound/oss/opl3: validate voice and channel indexes
  sound/oss: remove offset from load_patch callbacks

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: Clean up max8997 IRQ namespace
  mfd: Fold irq_set_chip/irq_set_handler
  mfd: Cleanup irq namespace
  mfd: twl6030: Cleanup interrupt handling
  mfd: twl4030: Cleanup interrupt handling
  mfd: mx8925: Remove irq_desc leftovers
  mfd: htc-i2cpld: Cleanup interrupt handling
  mfd: htc-egpio: Cleanup interrupt handling
  mfd: ezx-pcap: Remvove open coded irq handling
  mfd: 88pm860x: Remove unused irq_desc leftovers
  mfd: asic3: Cleanup irq handling
  mfd: Select MFD_CORE if TPS6105X driver is configured
  mfd: Add MODULE_DEVICE_TABLE to rdc321x-southbridge
  mfd: Add MAX8997/8966 IRQ control
  mfd: Constify i2c_device_id tables
  mfd: OLPC: Clean up names to match what OLPC actually uses
  mfd: Add mfd_clone_cell(), convert cs5535-mfd/olpc-xo1 to it

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (pmbus) Fix temperature limit register access

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  hwspinlock: depend on OMAP4
  ARM: OMAP2+: Fix warnings for GPMC interrupt
  OMAP4: PandaBoard: remove unused power regulators
  arm: mach-omap2: omap_l3_smx: fix irq handler setup
  arm: mach-omap2: devices: fix omap3_l3_init() return value

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  staging: Fix bdops->check_events() misconversion in cyasblkdev_block.c
  ide: ensure that we re-run the queue handler

* 'for-2.6.39/drivers' of git://git.kernel.dk/linux-2.6-block: (122 commits)
  cciss: fix lost command issue
  drbd: need include for bitops functions declarations
  Revert "cciss: Add missing allocation in scsi_cmd_stack_setup and  corresponding deallocation"
  cciss: fix missed command status value CMD_UNABORTABLE
  cciss: remove unnecessary casts
  cciss: Mask off error bits of c->busaddr in cmd_special_free when calling pci_free_consistent
  cciss: Inform controller we are using 32-bit tags.
  cciss: hoist tag masking out of loop
  cciss: Add missing allocation in scsi_cmd_stack_setup and  corresponding deallocation
  cciss: export resettable host attribute
  drbd: drop code present under #ifdef which is relevant to 2.6.28 and below
  drbd: Fixed handling of read errors on a 'VerifyS' node
  drbd: Fixed handling of read errors on a 'VerifyT' node
  drbd: Implemented real timeout checking for request processing time
  drbd: Remove unused function atodb_endio()
  drbd: improve log message if received sector offset exceeds local capacity
  drbd: kill dead code
  drbd: don't BUG_ON, if bio_add_page of a single page to an empty bio fails
  drbd: Removed left over, now wrong comments
  drbd: serialize admin requests for new verify run with pending bitmap io
  ...

* 'docs-next' of git://git.lwn.net/linux-2.6:
  docs: update the development process document
  docs: fix dev_debug() braino in dynamic-debug-howto.txt

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (f71882fg) Add support for the F71889A
  hwmon: (f71882fg) Add support for the F81865F
  hwmon: (f71882fg) Document all supported devices
  hwmon: (f71882fg) Per-chip fan/temperature input count tables
  hwmon: (f71882fg) Secure chip property definition arrays

* 'for-linus-1' of git://git.infradead.org/mtd-2.6: (49 commits)
  mtd: mtdswap: fix compilation warning
  mtdswap: kill strict error handling option
  mtd: nand: enable software BCH ECC in nand simulator
  mtd: nand: add software BCH ECC support
  mtd: fix printf format warnings, mostly lack of %zd for size_t, in mtdswap
  mtd: sm_rtl: check kmalloc return value
  mtd: cfi: add support for AMIC flashes (e.g. A29L160AT)
  lib: add shared BCH ECC library
  mtd: mxc_nand: fix OOB corruption when page size > 2KiB
  mtd: DaVinci: Removed header file that is not required
  mtd: pxa3xx_nand: clean the keep configure code
  mtd: pxa3xx_nand: mtd scan id process could be defined by driver itself
  mtd: pxa3xx_nand: unify prepare command
  mtd: pxa3xx_nand: discard wait_for_event,write_cmd,__readid function
  mtd: pxa3xx_nand: rework irq logic
  mtd: pxa3xx_nand: make scan procedure more clear
  mtd: speedtest: fix integer overflow
  mtd: mxc_nand: fix read past buffer end
  mtd: omap3: nand: report corrected ecc errors
  jffs2: remove a trailing white space in commentaries
  ...

I no longer have access to any hardware that uses APM and have not
provided real maintenance for several years.  Hopefully someone with the
hardware or energy will step forward if the driver is to be kept.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-and-appreciated-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix fsl_rio.c kernel-doc warning: no exported symbols as
requested by !E are found:

  Warning(arch/powerpc/sysdev/fsl_rio.c): no structured comments found
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

DocBook/v4l/ no longer has any *.png files, so the 'cp' command fails,
breaking the build.  Drop the *.png cp.

  cp: cannot stat `linux-2.6.38-git18/Documentation/DocBook/v4l/*.png': No such file or directory
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix inode.c kernel-doc fatal error: 2 comment sections have the same name:

  Error(fs/inode.c:1171): duplicate section name 'Note'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix ipc/util.c kernel-doc warnings:

  Warning(ipc/util.c:336): No description found for parameter 'ns'
  Warning(ipc/util.c:620): No description found for parameter 'ns'
  Warning(ipc/util.c:790): No description found for parameter 'ns'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix mm/memory.c incorrect kernel-doc function notation:

  Warning(mm/memory.c:3718): Cannot understand  * @access_remote_vm - access another process' address space
   on line 3718 - I thought it was a doc line
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Omit the segment prefix in the UP case. GS is not used then
and we will generate segfaults if cmpxchg16b is used otherwise.
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When m_start returns an error, the seq_file logic will still call m_stop
with that error entry, so we'd better make sure that we check it before
using it as a vma.

Introduced by commit ec6fd8a4 ("report errors in /proc/*/*map*
sanely"), which replaced NULL with various ERR_PTR() cases.

(On ia64, you happen to get a unaligned fault instead of a page fault,
since the address used is generally some random error code like -EPERM)
Reported-by: Anca Emanuel <anca.emanuel@gmail.com>
Reported-by: Tony Luck <tony.luck@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Américo Wang <xiyou.wangcong@gmail.com>
Cc: Stephen Wilson <wilsons@start.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The device table is required to load modules based on modaliases.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: MyungJoo Ham <myungjoo.ham@smasung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Use the combined irq_set_chip_and_handler() function
instead. Converted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Converted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

irq_desc checking in the interrupt demux routine is totally
pointless. The driver sets those lines up, so that cant go away
magically.

Remove the open coded handler magic and use the proper accessor.

This driver needs to be converted to threaded interrupts and buslock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

irq_desc checking in a function which is called with that irq
descriptor locked, is pointless. Equally pointless as the irq desc
check in the interrupt service routine. The driver sets those lines
up, so that cant go away magically.

Remove the open coded handler magic and use the proper accessor.

No need to fiddle with irq_desc in the type setting function. The
original value is in irq_data and the core code stores the new setting
when the return value is 0.

This driver needs to be converted to threaded interrupts and buslock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Remove unused code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Remove the pointless irq_desc check in set_type. This function is
called with that irq descriptor locked. Also remove the write back of
the flow type as the core code does this already when the return value
is 0.

Also store the flow type in the chip data structure, so there is no
need to fiddle in the irq descriptor.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Replace the open coded handler call with the prober accessor. Retrieve
the handler data from desc. That avoids a redundant lookup in the
sparse irq case.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

There is no point in checking irq_desc here, as it _is_ available. The
driver configured those lines, so they cannot go away.

The home brewn disabled/note_interrupt magic can be removed as well by
adding a irq_disable callback which avoids the lazy disable.

That driver needs to be converted to threaded interrupts.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>