The list API now provides the list_count() to help with counting
existing nodes in the list. Utilise it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221123144901.40493-2-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some of the existing users, and definitely will be new ones, want to
count existing nodes in the list. Provide a generic API for that by
moving code from i915 to list.h.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221123144901.40493-1-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Unify error handling at the end of the function, reducing the risk of
missing something on one of the error paths.

Moving the increment of opts->refcnt later means there is no need to
decrement it on the error path and is safe as this is guarded by
opts->lock which is held for this entire section.
Tested-by: Lee Jones <lee@kernel.org>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Lee Jones <lee@kernel.org>
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20221122123523.3068034-4-john@metanate.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When failing to allocate report_desc, opts->refcnt has already been
incremented so it needs to be decremented to avoid leaving the options
structure permanently locked.

Fixes: 21a9476a ("usb: gadget: hid: add configfs support")
Tested-by: Lee Jones <lee@kernel.org>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Lee Jones <lee@kernel.org>
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20221122123523.3068034-3-john@metanate.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The embedded struct cdev does not have its lifetime correctly tied to
the enclosing struct f_hidg, so there is a use-after-free if /dev/hidgN
is held open while the gadget is deleted.

This can readily be replicated with libusbgx's example programs (for
conciseness - operating directly via configfs is equivalent):

	gadget-hid
	exec 3<> /dev/hidg0
	gadget-vid-pid-remove
	exec 3<&-

Pull the existing device up in to struct f_hidg and make use of the
cdev_device_{add,del}() helpers.  This changes the lifetime of the
device object to match struct f_hidg, but note that it is still added
and deleted at the same time.

Fixes: 71adf118 ("USB: gadget: add HID gadget driver")
Tested-by: Lee Jones <lee@kernel.org>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Lee Jones <lee@kernel.org>
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20221122123523.3068034-2-john@metanate.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a new compatible for mt8186 SoC.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Link: https://lore.kernel.org/r/20221123135531.23221-2-allen-kh.cheng@mediatek.comAcked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since commit 0166dc11 ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.

It is actually better to always build such drivers with OF enabled,
so that the test builds are closer to how each driver will actually be
built on its intended target. Building them without OF may not test
much as the compiler will optimize out potentially large parts of the
code. In the worst case, this could even pop false positive warnings.
Dropping COMPILE_TEST here improves the quality of our testing and
avoids wasting time on non-existent issues.

Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/r/20221127155230.144886b7@endymion.delvareSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Patch implements the handling of ZLP for control transfer.
To send the ZLP driver must prepare the extra TRB in TD with
length set to zero and TRB type to TRB_NORMAL.
The first TRB must have set TRB_CHAIN flag, TD_SIZE = 1
and TRB type to TRB_DATA.

Fixes: 3d829045 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
cc: <stable@vger.kernel.org>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20221122085138.332434-1-pawell@cadence.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The am35x glue layer is no longer in use and can be dropped. There are no
longer any SoCs passing platform data for it as they are booting using
devicetree.

In general, the am35x SoCs are similar to am335x and ti81xx and can
use the musb_dsps glue layer as long as there is a proper phy driver
available.

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221125085506.38127-1-tony@atomide.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In order to tell what Type-C device a PD object belongs to, its parent
needs to be set. Use the Type-C partner USB PD registration wrapper
to set the parent appropriately for PD objects which are created for
connected Type-C partners.

Cc: Benson Leung <bleung@chromium.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20221122220538.2991775-3-pmalani@chromium.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some port drivers may want to set a Type-C partner as a parent for a
USB Power Delivery object, but the Type-C partner struct isn't exposed
outside of the Type-C class driver. Add a wrapper to
usb_power_delivery_register() which sets the provided Type-C partner
as a parent to the USB PD object. This helps to avoid exposing the
Type-C partner's device struct unnecessarily.

Cc: Benson Leung <bleung@chromium.org>
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20221122220538.2991775-2-pmalani@chromium.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Can not set the @shared_hcd to NULL before decrease the usage count
by usb_put_hcd(), this will cause the shared hcd not released.

Fixes: 04284eb7 ("usb: xhci-mtk: add support runtime PM")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20221128063337.18124-1-chunfeng.yun@mediatek.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB drivers do not need to call usb_set_intfdata(intf, NULL) in their
usb_driver::disconnect callback because the core already does it in [1].

However, this fact is widely unknown, c.f.:

  $ git grep "usb_set_intfdata(.*NULL)" | wc -l
  215

Especially, setting the interface to NULL before all action completed
can result in a NULL pointer dereference. Not calling
usb_set_intfdata() at all in disconnect() is the safest method.

Add documentation to usb_set_intfdata() to clarify this point.

Also remove the call in usb-skeletion's disconnect() not to confuse
the new comers.

[1] function usb_unbind_interface() from drivers/usb/core/driver.c
Link: https://elixir.bootlin.com/linux/v6.0/source/drivers/usb/core/driver.c#L497Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20221128102954.3615579-1-mailhol.vincent@wanadoo.frSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change "ehci_hq" to "ehci_qh" in this comment.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20221128081306.2772729-1-xu.yang_2@nxp.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The device ID 0xa70e is defined for the USB3 device controller in the CPU
sub-system of Raptor Lake platform. Hence updating the ID accordingly.

Fixes: bad0d1d7 ("usb: dwc3: pci: Add support for Intel Raptor Lake")
Cc: stable <stable@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Shruthi Sanil <shruthi.sanil@intel.com>
Link: https://lore.kernel.org/r/20221125105327.27945-1-shruthi.sanil@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If dmam_alloc_attrs() fails, it returns NULL pointer and never
return ERR_PTR(), so repleace IS_ERR() with IS_ERR_OR_NULL()
and if it's NULL, returns -ENOMEM.

Fixes: 9ba26f5c ("ARM: sa1100/assabet: move dmabounce hack to ohci driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221125064120.2842452-1-yangyingliang@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Don't issue messages which can be easily achieved with ftrace.
In case of printer_open() the return code is propagated to other layers
so the user will know about -EBUSY anyway.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Link: https://lore.kernel.org/r/20221123110746.59611-1-andrzej.p@collabora.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It can take more than one second to check each connector
when the system is resumed. So if you have, say, eight
connectors, it may take eight seconds for ucsi_resume() to
finish. That's a bit too much.

This will modify ucsi_resume() so that it schedules a work
where the interface is actually resumed instead of checking
the connectors directly. The connections will also be
checked in separate tasks which are queued for each connector
separately.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216706
Fixes: 99f6d436 ("usb: typec: ucsi: Check the connection on resume")
Cc: <stable@vger.kernel.org>
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221123093021.25981-1-heikki.krogerus@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

I got the following report while doing device(mt6370-tcpc) load
test with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled:

  OF: ERROR: memory leak, expected refcount 1 instead of 2,
  of_node_get()/of_node_put() unbalanced - destroy cset entry:
  attach overlay node /i2c/pmic@34

The 'parent' returned by fwnode_get_parent() with refcount incremented.
it needs be put after using.

Fixes: 6fadd729 ("usb: roles: get usb-role-switch from parent")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221122111226.251588-1-yangyingliang@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull vfs fix from Al Viro:
 "Amir's copy_file_range() fix"

* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vfs: fix copy_file_range() averts filesystem freeze protection

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 6.1-rc7 that resolve some reported
  problems:

   - cdnsp driver fixes for reported problems

   - dwc3 fixes for some small reported problems

   - uvc gadget driver fix for reported regression

  All of these have been in linux-next with no reported problems"

* tag 'usb-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: cdnsp: fix issue with ZLP - added TD_SIZE = 1
  usb: dwc3: gadget: Clear ep descriptor last
  usb: dwc3: exynos: Fix remove() function
  usb: cdnsp: Fix issue with Clear Feature Halt Endpoint
  usb: dwc3: gadget: Disable GUSB2PHYCFG.SUSPHY for End Transfer
  usb: gadget: uvc: also use try_format in set_format

Pull char/misc driver fixes from Greg KH:
 "Here are some small driver fixes for 6.1-rc7, they include:

   - build warning fix for the vdso when using new versions of grep

   - iio driver fixes for reported issues

   - small nvmem driver fixes

   - fpga Kconfig fix

   - interconnect dt binding fix

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  lib/vdso: use "grep -E" instead of "egrep"
  nvmem: lan9662-otp: Change return type of lan9662_otp_wait_flag_clear()
  nvmem: rmem: Fix return value check in rmem_read()
  fpga: m10bmc-sec: Fix kconfig dependencies
  dt-bindings: iio: adc: Remove the property "aspeed,trim-data-valid"
  iio: adc: aspeed: Remove the trim valid dts property.
  iio: core: Fix entry not deleted when iio_register_sw_trigger_type() fails
  iio: accel: bma400: Fix memory leak in bma400_get_steps_reg()
  iio: light: rpr0521: add missing Kconfig dependencies
  iio: health: afe4404: Fix oob read in afe4404_[read|write]_raw
  iio: health: afe4403: Fix oob read in afe4403_read_raw
  iio: light: apds9960: fix wrong register for gesture gain
  dt-bindings: interconnect: qcom,msm8998-bwmon: Correct SC7280 CPU compatible

Pull timer fix from Borislav Petkov:

 - Return the proper timer register width (31 bits) for a 32-bit signed
   register in order to avoid a timer interrupt storm on ARM XGene-1
   hardware running in NO_HZ mode

* tag 'timers_urgent_for_v6.1_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/arm_arch_timer: Fix XGene-1 TVAL register math error

Pull objtool fix from Borislav Petkov:

 - Handle different output of readelf on different distros running
   ppc64le which confuses faddr2line's function offsets conversion

* tag 'objtool_urgent_for_v6.1_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  scripts/faddr2line: Fix regression in name resolution on ppc64le

Pull x86 fixes from Borislav Petkov:

 - ioremap: mask out the bits which are not part of the physical address
   *after* the size computation is done to prevent any hypothetical
   ioremap failures

 - Change the MSR save/restore functionality during suspend to rely on
   flags denoting that the related MSRs are actually supported vs
   reading them and assuming they are (an Atom one allows reading but
   not writing, thus breaking this scheme at resume time)

 - prevent IV reuse in the AES-GCM communication scheme between SNP
   guests and the AMD secure processor

* tag 'x86_urgent_for_v6.1_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ioremap: Fix page aligned size calculation in __ioremap_caller()
  x86/pm: Add enumeration check before spec MSRs save/restore setup
  x86/tsx: Add a feature bit for TSX control MSR support
  virt/sev-guest: Prevent IV reuse in the SNP guest driver

Pull perf fixes from Borislav Petkov:
 "Two more fixes to the perf sigtrap handling:

   - output the address in the sample only when it has been requested

   - handle the case where user-only events can hit in kernel and thus
     upset the sigtrap sanity checking"

* tag 'perf_urgent_for_v6.1_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Consider OS filter fail
  perf: Fixup SIGTRAP and sample_flags interaction

Pull kvm fixes from Paolo Bonzini:
 "x86:

   - Fixes for Xen emulation. While nobody should be enabling it in the
     kernel (the only public users of the feature are the selftests),
     the bug effectively allows userspace to read arbitrary memory.

   - Correctness fixes for nested hypervisors that do not intercept INIT
     or SHUTDOWN on AMD; the subsequent CPU reset can cause a
     use-after-free when it disables virtualization extensions. While
     downgrading the panic to a WARN is quite easy, the full fix is a
     bit more laborious; there are also tests. This is the bulk of the
     pull request.

   - Fix race condition due to incorrect mmu_lock use around
     make_mmu_pages_available().

  Generic:

   - Obey changes to the kvm.halt_poll_ns module parameter in VMs not
     using KVM_CAP_HALT_POLL, restoring behavior from before the
     introduction of the capability"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Update gfn_to_pfn_cache khva when it moves within the same page
  KVM: x86/xen: Only do in-kernel acceleration of hypercalls for guest CPL0
  KVM: x86/xen: Validate port number in SCHEDOP_poll
  KVM: x86/mmu: Fix race condition in direct_page_fault
  KVM: x86: remove exit_int_info warning in svm_handle_exit
  KVM: selftests: add svm part to triple_fault_test
  KVM: x86: allow L1 to not intercept triple fault
  kvm: selftests: add svm nested shutdown test
  KVM: selftests: move idt_entry to header
  KVM: x86: forcibly leave nested mode on vCPU reset
  KVM: x86: add kvm_leave_nested
  KVM: x86: nSVM: harden svm_free_nested against freeing vmcb02 while still in use
  KVM: x86: nSVM: leave nested mode on vCPU free
  KVM: Obey kvm.halt_poll_ns in VMs not using KVM_CAP_HALT_POLL
  KVM: Avoid re-reading kvm->max_halt_poll_ns during halt-polling
  KVM: Cap vcpu->halt_poll_ns before halting rather than after

Pull cifs fixes from Steve French:
 "Two small cifs/smb3 client fixes:

   - an unlock missing in an error path in copychunk_range found by
     xfstest 476

   - a fix for a use after free in a debug code path"

* tag '6.1-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix missing unlock in cifs_file_copychunk_range()
  cifs: Use after free in debug code

Merge tag 'kbuild-fixes-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix CC_HAS_ASM_GOTO_TIED_OUTPUT test in Kconfig

 - Fix noisy "No such file or directory" message when
   KBUILD_BUILD_VERSION is passed

 - Include rust/ in source tarballs

 - Fix missing FORCE for ARCH=nios2 builds

* tag 'kbuild-fixes-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  nios2: add FORCE for vmlinuz.gz
  scripts: add rust in scripts/Makefile.package
  kbuild: fix "cat: .version: No such file or directory"
  init/Kconfig: fix CC_HAS_ASM_GOTO_TIED_OUTPUT test with dash

Add FORCE to placate a warning from make:

arch/nios2/boot/Makefile:24: FORCE prerequisite is missing

Fixes: 2fc8483f ("nios2: Build infrastructure")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>

Pull nfsd fix from Chuck Lever:

 - Fix rare data corruption on READ operations

* tag 'nfsd-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  NFSD: Fix reads with a non-zero offset that don't end on a page boundary

Pull power supply fixes from Sebastian Reichel:

 - rk817: Two error handling fixes

 - ip5xxx: fix inter overflow in current calculation

 - ab8500: fix thermal zone probing

* tag 'for-v6.1-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: supply: ab8500: Defer thermal zone probe
  power: supply: ip5xxx: Fix integer overflow in current_now calculation
  power: supply: rk817: Change rk817_chg_cur_to_reg to int
  power: supply: rk817: check correct variable

Pull block fixes from Jens Axboe:

 - A few fixes for s390 sads (Stefan, Colin)

 - Ensure that ublk doesn't reorder requests, as that can be problematic
   on devices that need specific ordering (Ming)

 - Fix a queue reference leak in disk allocation handling (Christoph)

* tag 'block-6.1-2022-11-25' of git://git.kernel.dk/linux:
  ublk_drv: don't forward io commands in reserve order
  s390/dasd: fix possible buffer overflow in copy_pair_show
  s390/dasd: fix no record found for raw_track_access
  s390/dasd: increase printing of debug data payload
  s390/dasd: Fix spelling mistake "Ivalid" -> "Invalid"
  blk-mq: fix queue reference leak on blk_mq_alloc_disk_for_queue failure

Pull io_uring fixes from Jens Axboe:

 - A few poll related fixes. One fixing a race condition between poll
   cancelation and trigger, and one making the overflow handling a bit
   more robust (Lin, Pavel)

 - Fix an fput() for error handling in the direct file table (Lin)

 - Fix for a regression introduced in this cycle, where we don't always
   get TIF_NOTIFY_SIGNAL cleared appropriately (me)

* tag 'io_uring-6.1-2022-11-25' of git://git.kernel.dk/linux:
  io_uring: clear TIF_NOTIFY_SIGNAL if set and task_work not available
  io_uring/poll: fix poll_refs race with cancelation
  io_uring/filetable: fix file reference underflow
  io_uring: make poll refs more robust
  io_uring: cmpxchg for poll arm refs release

Pull zonefs fixes from Damien Le Moal:

 - Fix a race between zonefs module initialization of sysfs attribute
   directory and mounting a drive (from Xiaoxu).

 - Fix active zone accounting in the rare case of an IO error due to a
   zone transition to offline or read-only state (from me).

* tag 'zonefs-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: Fix active zone accounting
  zonefs: Fix race between modprobe and mount

Merge tag 'regulator-fix-v6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "This is more changes than I'd like this late although the diffstat is
  still fairly small, I kept on holding off as new fixes came in to give
  things time to soak in -next but should probably have tagged and sent
  an additional pull request earlier.

  There's some relatively large fixes to the twl6030 driver to fix
  issues with the TWL6032 variant which resulted from some work on the
  core TWL6030 driver, a couple of fixes for error handling paths
  (mostly in the core), and a nice stability fix for the sgl51000 driver
  that's been pulled out of a BSP"

* tag 'regulator-fix-v6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: twl6030: fix get status of twl6032 regulators
  regulator: twl6030: re-add TWL6032_SUBCLASS
  regulator: slg51000: Wait after asserting CS pin
  regulator: core: fix UAF in destroy_regulator()
  regulator: rt5759: fix OOB in validate_desc()
  regulator: core: fix kobject release warning and memory leak in regulator_register()

Pull btrfs fixes from David Sterba:

 - fix a regression in nowait + buffered write

 - in zoned mode fix endianness when comparing super block generation

 - locking and lockdep fixes:
     - fix potential sleeping under spinlock when setting qgroup limit
     - lockdep warning fixes when btrfs_path is freed after copy_to_user
     - do not modify log tree while holding a leaf from fs tree locked

 - fix freeing of sysfs files of static features on error

 - use kv.alloc for zone map allocation as a fallback to avoid warnings
   due to high order allocation

 - send, avoid unaligned encoded writes when attempting to clone range

* tag 'for-6.1-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: sysfs: normalize the error handling branch in btrfs_init_sysfs()
  btrfs: do not modify log tree while holding a leaf from fs tree locked
  btrfs: use kvcalloc in btrfs_get_dev_zone_info
  btrfs: qgroup: fix sleep from invalid context bug in btrfs_qgroup_inherit()
  btrfs: send: avoid unaligned encoded writes when attempting to clone range
  btrfs: zoned: fix missing endianness conversion in sb_write_pointer
  btrfs: free btrfs_path before copying subvol info to userspace
  btrfs: free btrfs_path before copying fspath to userspace
  btrfs: free btrfs_path before copying inodes to userspace
  btrfs: free btrfs_path before copying root refs to userspace
  btrfs: fix assertion failure and blocking during nowait buffered write

Pull power management fixes from Rafael Wysocki:
 "These revert a recent change in the schedutil cpufreq governor that
  had not been expected to make any functional difference, but turned
  out to introduce a performance regression, fix an initialization issue
  in the amd-pstate driver and make it actually replace the venerable
  ACPI cpufreq driver on the supported systems by default.

  Specifics:

   - Revert a recent schedutil cpufreq governor change that introduced a
     performace regression on Pixel 6 (Sam Wu)

   - Fix amd-pstate driver initialization after running the kernel via
     kexec (Wyes Karny)

   - Turn amd-pstate into a built-in driver which allows it to take
     precedence over acpi-cpufreq by default on supported systems and
     amend it with a mechanism to disable this behavior (Perry Yuan)

   - Update amd-pstate documentation in accordance with the other
     changes made to it (Perry Yuan)"

* tag 'pm-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Documentation: add amd-pstate kernel command line options
  Documentation: amd-pstate: add driver working mode introduction
  cpufreq: amd-pstate: add amd-pstate driver parameter for mode selection
  cpufreq: amd-pstate: change amd-pstate driver to be built-in type
  cpufreq: amd-pstate: cpufreq: amd-pstate: reset MSR_AMD_PERF_CTL register at init
  Revert "cpufreq: schedutil: Move max CPU capacity to sugov_policy"