- 04 Mar, 2020 6 commits
-
-
Bernard Metzler authored
Holding the rtnl_lock while iterating a devices interface address list potentially causes deadlocks with the cma_netdev_callback. While this was implemented to limit the scope of a wildcard listen to addresses of the current device only, a better solution limits the scope of the socket to the device. This completely avoiding locking, and also results in significant code simplification. Fixes: c421651f ("RDMA/siw: Add missing rtnl_lock around access to ifa") Link: https://lore.kernel.org/r/20200228173534.26815-1-bmt@zurich.ibm.com Reported-by: syzbot+55de90ab5f44172b0c90@syzkaller.appspotmail.com Suggested-by: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Parav Pandit authored
Cited commit missed to include low level congestion control related debugfs stage initialization. This resulted in missing debugfs entries for cc_params of a RDMA device. Add them back. Fixes: b5ca15ad ("IB/mlx5: Add proper representors support") Link: https://lore.kernel.org/r/20200227125407.99803-1-leon@kernel.orgSigned-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Parav Pandit authored
Add two debugfs parameters described below. np_min_time_between_cnps - Minimum time between sending CNPs from the port. Unit = microseconds. Default = 0 (no min wait time; generated based on incoming ECN marked packets). rp_max_rate - Maximum rate at which reaction point node can transmit. Once this limit is reached, RP is no longer rate limited. Unit = Mbits/sec Default = 0 (full speed) Link: https://lore.kernel.org/r/20200227125246.99472-1-leon@kernel.orgSigned-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Alexander Lobakin authored
Commit f164be8c ("IB/mlx5: Extend caps stage to handle VAR capabilities") introduced a straight "/" division of the u64 variable "bar_size". This was fixed with commit 685eff51 ("IB/mlx5: Use div64_u64 for num_var_hw_entries calculation"). However, div64_u64() is redundant here as mlx5_var_table::stride_size is of type u32. Make the actual code way more optimized on 32-bit kernels using div_u64() and fix 80 chars break-through by the way. Fixes: 685eff51 ("IB/mlx5: Use div64_u64 for num_var_hw_entries calculation") Link: https://lore.kernel.org/r/20200217073629.8051-1-alobakin@dlink.ruSigned-off-by: Alexander Lobakin <alobakin@dlink.ru> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Jason Gunthorpe authored
Required due to dependencies in following patches. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Kamal Heib authored
The proper return code is "-EOPNOTSUPP" when the requested QP type is not supported by the provider. Link: https://lore.kernel.org/r/20200130082049.463-1-kamalheib1@gmail.comSigned-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
- 02 Mar, 2020 6 commits
-
-
Michael Guralnik authored
Relaxed ordering is not supported in UMR so we are disabling UMR usage when user passes relaxed ordering access flag. Enable using UMR when user requested relaxed ordering but there are no relaxed ordering capabilities. This will prevent user from unnecessarily registering a new mkey. Fixes: d6de0bb1 ("RDMA/mlx5: Set relaxed ordering when requested") Link: https://lore.kernel.org/r/20200227113834.94233-1-leon@kernel.orgSigned-off-by: Michael Guralnik <michaelgur@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/infiniband/hw/bnxt_re/qplib_rcfw.c: In function '__send_message': drivers/infiniband/hw/bnxt_re/qplib_rcfw.c:101:10: warning: variable 'idx' set but not used [-Wunused-but-set-variable] drivers/infiniband/hw/bnxt_re/qplib_rcfw.c:101:6: warning: variable 'pg' set but not used [-Wunused-but-set-variable] commit cee0c7bb ("RDMA/bnxt_re: Refactor command queue management code") involved this, but not used. Link: https://lore.kernel.org/r/20200227064900.92255-1-yuehaibing@huawei.comSigned-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/infiniband/hw/bnxt_re/ib_verbs.c: In function 'bnxt_re_create_gsi_qp': drivers/infiniband/hw/bnxt_re/ib_verbs.c:1283:30: warning: variable 'dev_attr' set but not used [-Wunused-but-set-variable] commit 8dae419f ("RDMA/bnxt_re: Refactor queue pair creation code") involved this, but not used, so remove it. Link: https://lore.kernel.org/r/20200227064542.91205-1-yuehaibing@huawei.comReported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/infiniband/hw/bnxt_re/qplib_res.c: In function '__alloc_pbl': drivers/infiniband/hw/bnxt_re/qplib_res.c:109:13: warning: variable 'pg_size' set but not used [-Wunused-but-set-variable] commit 0c4dcd60 ("RDMA/bnxt_re: Refactor hardware queue memory allocation") involved this, but not used, so remove it. Link: https://lore.kernel.org/r/20200227064209.87893-1-yuehaibing@huawei.comReported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Selvin Xavier authored
Using the new unregister APIs provided by the core. Provide the dealloc_driver hook for the core to callback at the time of device un-registration. bnxt_re VF resources are created by the corresponding PF driver. During ib_unregister_driver, PF might get removed before VF and this could cause failure when VFs are removed. Driver is explicitly queuing the removal of VF devices before calling ib_unregister_driver. Link: https://lore.kernel.org/r/1582731932-26574-3-git-send-email-selvin.xavier@broadcom.comSigned-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Selvin Xavier authored
- bnxt_re_ib_reg() handles two main functionalities - initializing the device and registering with the IB stack. Split it into 2 functions i.e. bnxt_re_dev_init() and bnxt_re_ib_init() to account for the same thereby improve modularity. Do the same for bnxt_re_ib_unreg()i.e. split into two functions - bnxt_re_dev_uninit() and bnxt_re_ib_uninit(). - Simplify the code by combining the different steps to add and remove the device into two functions. - Report correct netdev link state during device register Link: https://lore.kernel.org/r/1582731932-26574-2-git-send-email-selvin.xavier@broadcom.comSigned-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
- 01 Mar, 2020 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Two more bug fixes (including a regression) for 5.6" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: potential crash on allocation error in ext4_alloc_flex_bg_array() jbd2: fix data races at struct journal_head
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "More bugfixes, including a few remaining "make W=1" issues such as too large frame sizes on some configurations. On the ARM side, the compiler was messing up shadow stacks between EL1 and EL2 code, which is easily fixed with __always_inline" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: check descriptor table exits on instruction emulation kvm: x86: Limit the number of "kvm: disabled by bios" messages KVM: x86: avoid useless copy of cpufreq policy KVM: allow disabling -Werror KVM: x86: allow compiling as non-module with W=1 KVM: Pre-allocate 1 cpumask variable per cpu for both pv tlb and pv ipis KVM: Introduce pv check helpers KVM: let declaration of kvm_get_running_vcpus match implementation KVM: SVM: allocate AVIC data structures based on kvm_amd module parameter arm64: Ask the compiler to __always_inline functions used by KVM at HYP KVM: arm64: Define our own swab32() to avoid a uapi static inline KVM: arm64: Ask the compiler to __always_inline functions used at HYP kvm: arm/arm64: Fold VHE entry/exit work into kvm_vcpu_run_vhe() KVM: arm/arm64: Fix up includes for trace.h
-
Oliver Upton authored
KVM emulates UMIP on hardware that doesn't support it by setting the 'descriptor table exiting' VM-execution control and performing instruction emulation. When running nested, this emulation is broken as KVM refuses to emulate L2 instructions by default. Correct this regression by allowing the emulation of descriptor table instructions if L1 hasn't requested 'descriptor table exiting'. Fixes: 07721fee ("KVM: nVMX: Don't emulate instructions in guest mode") Reported-by: Jan Kiszka <jan.kiszka@web.de> Cc: stable@vger.kernel.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "I2C has three driver bugfixes for you. We agreed on the Mac regression to go in via I2C" * 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: macintosh: therm_windtunnel: fix regression when instantiating devices i2c: altera: Fix potential integer overflow i2c: jz4780: silence log flood on txabrt
-
- 29 Feb, 2020 4 commits
-
-
Dan Carpenter authored
If sbi->s_flex_groups_allocated is zero and the first allocation fails then this code will crash. The problem is that "i--" will set "i" to -1 but when we compare "i >= sbi->s_flex_groups_allocated" then the -1 is type promoted to unsigned and becomes UINT_MAX. Since UINT_MAX is more than zero, the condition is true so we call kvfree(new_groups[-1]). The loop will carry on freeing invalid memory until it crashes. Fixes: 7c990728 ("ext4: fix potential race between s_flex_groups online resizing and access") Reviewed-by: Suraj Jitindar Singh <surajjs@amazon.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20200228092142.7irbc44yaz3by7nb@kili.mountainSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Wolfram Sang authored
Removing attach_adapter from this driver caused a regression for at least some machines. Those machines had the sensors described in their DT, too, so they didn't need manual creation of the sensor devices. The old code worked, though, because manual creation came first. Creation of DT devices then failed later and caused error logs, but the sensors worked nonetheless because of the manually created devices. When removing attach_adaper, manual creation now comes later and loses the race. The sensor devices were already registered via DT, yet with another binding, so the driver could not be bound to it. This fix refactors the code to remove the race and only manually creates devices if there are no DT nodes present. Also, the DT binding is updated to match both, the DT and manually created devices. Because we don't know which device creation will be used at runtime, the code to start the kthread is moved to do_probe() which will be called by both methods. Fixes: 3e7bed52 ("macintosh: therm_windtunnel: drop using attach_adapter") Link: https://bugzilla.kernel.org/show_bug.cgi?id=201723Reported-by: Erhard Furtner <erhard_f@mailbox.org> Tested-by: Erhard Furtner <erhard_f@mailbox.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org # v4.19+
-
Qian Cai authored
journal_head::b_transaction and journal_head::b_next_transaction could be accessed concurrently as noticed by KCSAN, LTP: starting fsync04 /dev/zero: Can't open blockdev EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) ================================================================== BUG: KCSAN: data-race in __jbd2_journal_refile_buffer [jbd2] / jbd2_write_access_granted [jbd2] write to 0xffff99f9b1bd0e30 of 8 bytes by task 25721 on cpu 70: __jbd2_journal_refile_buffer+0xdd/0x210 [jbd2] __jbd2_journal_refile_buffer at fs/jbd2/transaction.c:2569 jbd2_journal_commit_transaction+0x2d15/0x3f20 [jbd2] (inlined by) jbd2_journal_commit_transaction at fs/jbd2/commit.c:1034 kjournald2+0x13b/0x450 [jbd2] kthread+0x1cd/0x1f0 ret_from_fork+0x27/0x50 read to 0xffff99f9b1bd0e30 of 8 bytes by task 25724 on cpu 68: jbd2_write_access_granted+0x1b2/0x250 [jbd2] jbd2_write_access_granted at fs/jbd2/transaction.c:1155 jbd2_journal_get_write_access+0x2c/0x60 [jbd2] __ext4_journal_get_write_access+0x50/0x90 [ext4] ext4_mb_mark_diskspace_used+0x158/0x620 [ext4] ext4_mb_new_blocks+0x54f/0xca0 [ext4] ext4_ind_map_blocks+0xc79/0x1b40 [ext4] ext4_map_blocks+0x3b4/0x950 [ext4] _ext4_get_block+0xfc/0x270 [ext4] ext4_get_block+0x3b/0x50 [ext4] __block_write_begin_int+0x22e/0xae0 __block_write_begin+0x39/0x50 ext4_write_begin+0x388/0xb50 [ext4] generic_perform_write+0x15d/0x290 ext4_buffered_write_iter+0x11f/0x210 [ext4] ext4_file_write_iter+0xce/0x9e0 [ext4] new_sync_write+0x29c/0x3b0 __vfs_write+0x92/0xa0 vfs_write+0x103/0x260 ksys_write+0x9d/0x130 __x64_sys_write+0x4c/0x60 do_syscall_64+0x91/0xb05 entry_SYSCALL_64_after_hwframe+0x49/0xbe 5 locks held by fsync04/25724: #0: ffff99f9911093f8 (sb_writers#13){.+.+}, at: vfs_write+0x21c/0x260 #1: ffff99f9db4c0348 (&sb->s_type->i_mutex_key#15){+.+.}, at: ext4_buffered_write_iter+0x65/0x210 [ext4] #2: ffff99f5e7dfcf58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2] #3: ffff99f9db4c0168 (&ei->i_data_sem){++++}, at: ext4_map_blocks+0x176/0x950 [ext4] #4: ffffffff99086b40 (rcu_read_lock){....}, at: jbd2_write_access_granted+0x4e/0x250 [jbd2] irq event stamp: 1407125 hardirqs last enabled at (1407125): [<ffffffff980da9b7>] __find_get_block+0x107/0x790 hardirqs last disabled at (1407124): [<ffffffff980da8f9>] __find_get_block+0x49/0x790 softirqs last enabled at (1405528): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c softirqs last disabled at (1405521): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0 Reported by Kernel Concurrency Sanitizer on: CPU: 68 PID: 25724 Comm: fsync04 Tainted: G L 5.6.0-rc2-next-20200221+ #7 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 The plain reads are outside of jh->b_state_lock critical section which result in data races. Fix them by adding pairs of READ|WRITE_ONCE(). Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Qian Cai <cai@lca.pw> Link: https://lore.kernel.org/r/20200222043111.2227-1-cai@lca.pwSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Four small fixes. Three are in drivers for fairly obvious bugs. The fourth is a set of regressions introduced by the compat_ioctl changes because some of the compat updates wrongly replaced .ioctl instead of .compat_ioctl" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: compat_ioctl: cdrom: Replace .ioctl with .compat_ioctl in four appropriate places scsi: zfcp: fix wrong data and display format of SFP+ temperature scsi: sd_sbc: Fix sd_zbc_report_zones() scsi: libfc: free response frame from GPN_ID
-
- 28 Feb, 2020 19 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: - Fix build issue on 32-bit ARM with old compilers (Marek Szyprowski) - Update MAINTAINERS for recent Cadence driver file move (Lukas Bulwahn) * tag 'pci-v5.6-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: MAINTAINERS: Correct Cadence PCI driver path PCI: brcmstb: Fix build on 32bit ARM platforms with older compilers
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - Passthrough insertion fix (Ming) - Kill off some unused arguments (John) - blktrace RCU fix (Jan) - Dead fields removal for null_blk (Dongli) - NVMe polled IO fix (Bijan) * tag 'block-5.6-2020-02-28' of git://git.kernel.dk/linux-block: nvme-pci: Hold cq_poll_lock while completing CQEs blk-mq: Remove some unused function arguments null_blk: remove unused fields in 'nullb_cmd' blktrace: Protect q->blk_trace with RCU blk-mq: insert passthrough request into hctx->dispatch directly
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: - Fix for a race with IOPOLL used with SQPOLL (Xiaoguang) - Only show ->fdinfo if procfs is enabled (Tobias) - Fix for a chain with multiple personalities in the SQEs - Fix for a missing free of personality idr on exit - Removal of the spin-for-work optimization - Fix for next work lookup on request completion - Fix for non-vec read/write result progation in case of links - Fix for a fileset references on switch - Fix for a recvmsg/sendmsg 32-bit compatability mode * tag 'io_uring-5.6-2020-02-28' of git://git.kernel.dk/linux-block: io_uring: fix 32-bit compatability with sendmsg/recvmsg io_uring: define and set show_fdinfo only if procfs is enabled io_uring: drop file set ref put/get on switch io_uring: import_single_range() returns 0/-ERROR io_uring: pick up link work on submit reference drop io-wq: ensure work->task_pid is cleared on init io-wq: remove spin-for-work optimization io_uring: fix poll_list race for SETUP_IOPOLL|SETUP_SQPOLL io_uring: fix personality idr leak io_uring: handle multiple personalities in link chains
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fix from Keith. * 'nvme-5.6-rc4' of git://git.infradead.org/nvme: nvme-pci: Hold cq_poll_lock while completing CQEs
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fixes from Rafael Wysocki: "Fix a couple of configuration issues in the ACPI watchdog (WDAT) driver (Mika Westerberg) and make it possible to disable that driver at boot time in case it still does not work as expected (Jean Delvare)" * tag 'acpi-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: watchdog: Set default timeout in probe ACPI: watchdog: Fix gas->access_width usage ACPICA: Introduce ACPI_ACCESS_BYTE_WIDTH() macro ACPI: watchdog: Allow disabling WDAT at boot
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "Fix a recent cpufreq initialization regression (Rafael Wysocki), revert a devfreq commit that made incompatible changes and broke user land on some systems (Orson Zhai), drop a stale reference to a document that has gone away recently (Jonathan Neuschäfer), and fix a typo in a hibernation code comment (Alexandre Belloni)" * tag 'pm-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: Fix policy initialization for internal governor drivers Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs" PM / hibernate: fix typo "reserverd_size" -> "reserved_size" Documentation: power: Drop reference to interface.rst
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefsLinus Torvalds authored
Pull zonefs fixes from Damien Le Moal: "Two fixes in here: - Revert the initial decision to silently ignore IOCB_NOWAIT for asynchronous direct IOs to sequential zone files. Instead, return an error to the user to signal that the feature is not supported (from Christoph) - A fix to zonefs Kconfig to select FS_IOMAP to avoid build failures if no other file system already selected this option (from Johannes)" * tag 'zonefs-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: select FS_IOMAP zonefs: fix IOCB_NOWAIT handling
-
Gal Pressman authored
When destroying a DMA mmapped object, there is no need to artificially delay the freeing of the pages to the mmap entry removal. Since the vma keeps a reference count on these pages, free_pages_exact can be called on the destroy verb as it won't really free the pages until the reference count is cleared (in case the user hasn't called munmap yet). Remove the special handling of DMA pages and call free_pages_exact on destroy_qp/cq. The mmap entry removal is moved to the beginning of the destroy flows, so the driver can safely free the pages. Link: https://lore.kernel.org/r/20200225114010.21790-4-galpress@amazon.comReviewed-by: Firas JahJah <firasj@amazon.com> Reviewed-by: Yossi Leybovich <sleybo@amazon.com> Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Gal Pressman authored
The fact that the LSB in the register is the enable bit should not be an implicit assumption between the driver and the device, properly document that in the register definition. Link: https://lore.kernel.org/r/20200225114010.21790-3-galpress@amazon.comReviewed-by: Firas JahJah <firasj@amazon.com> Reviewed-by: Yossi Leybovich <sleybo@amazon.com> Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Gal Pressman authored
Use unified macros for device structs access instead of open coding the shifts and masks over and over again. Link: https://lore.kernel.org/r/20200225114010.21790-2-galpress@amazon.comReviewed-by: Firas JahJah <firasj@amazon.com> Reviewed-by: Yossi Leybovich <sleybo@amazon.com> Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Xi Wang authored
Encapsulate the kernel qp doorbell allocation related code into 2 functions: alloc_qp_db() and free_qp_db(). Link: https://lore.kernel.org/r/1582526258-13825-8-git-send-email-liweihang@huawei.comSigned-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Xi Wang authored
Encapsulate the kernel qp wrid allocation related code into 2 functions: alloc_kernel_wrid() and free_kernel_wrid(). Link: https://lore.kernel.org/r/1582526258-13825-7-git-send-email-liweihang@huawei.comSigned-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Xi Wang authored
Encapsulate the qp param setup related code into set_qp_param(). Link: https://lore.kernel.org/r/1582526258-13825-6-git-send-email-liweihang@huawei.comSigned-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Xi Wang authored
Encapsulate qp buffer allocation related code into 3 functions: alloc_qp_buf(), map_wqe_buf() and free_qp_buf(). Link: https://lore.kernel.org/r/1582526258-13825-5-git-send-email-liweihang@huawei.comSigned-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Xi Wang authored
Encapsulate the code associated with the qp number assignment into alloc_qpn() and free_qpn(). Link: https://lore.kernel.org/r/1582526258-13825-4-git-send-email-liweihang@huawei.comSigned-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Xi Wang authored
Rename the qp context related functions and adjusts the code location to distinguish between the qp context and the entire qp. Link: https://lore.kernel.org/r/1582526258-13825-3-git-send-email-liweihang@huawei.comSigned-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Xi Wang authored
Wrap the duplicate code in hip08 and hip06 qp destruction process as hns_roce_qp_destroy() to simply the qp destroy flow. Link: https://lore.kernel.org/r/1582526258-13825-2-git-send-email-liweihang@huawei.comSigned-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Yixian Liu authored
There are two paths to update qp producer index into hardware now, one path is doorbell in post verbs (send and recv), the another is mailbox in modify qp verb which is called by flush process. This will lead the hardware to be broken to correctly generate flush cqe. With stopping doorbell update and holding qp spinlock in modify qp during flush process, the problem can be solved. Fixes: 0425e3e6 ("RDMA/hns: Support flush cqe for hip08 in kernel space") Link: https://lore.kernel.org/r/1582367158-27030-3-git-send-email-liuyixian@huawei.comSigned-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Yixian Liu authored
As now we already have flush framework, using it instead of current flush process for qp error in asynchronized interrupt (aeq). Link: https://lore.kernel.org/r/1582367158-27030-2-git-send-email-liuyixian@huawei.comSigned-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-