Simplify probe and remove functions by converting most of the resources
to use devm_* APIs.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Use netdev_* where applicable.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

This patch adds the ability of allocating a CANFD frame data structure in the
skb data area.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

This is in the spirit of commit 2485602f (can: add explicit
copyrights to can headers). It seems I have missed can.h back then.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Pull UML changes from Richard Weinberger:
 "This time only various cleanups and housekeeping patches"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: hostfs: make functions static
  um: Include generic barrier.h
  um: Removed unused attributes from thread_struct

Pull MMC updates from Chris Ball:
 "MMC highlights for 3.14:

  Core:
   - Avoid get_cd() on cards marked nonremovable

  Drivers:
   - arasan: New driver for controllers found in e.g. Xilinx Zynq SoC
   - dwmmc: Support Hisilicon K3 SoC controllers
   - esdhc-imx: Support for HS200 mode, DDR modes on MX6, runtime PM
   - sdhci-pci: Support O2Micro/BayHubTech controllers used in laptops
     like Lenovo ThinkPad W540, Dell Latitude E5440, Dell Latitude E6540
   - tegra: Support Tegra124 SoCs"

* tag 'mmc-updates-for-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (55 commits)
  mmc: sdhci-pci: Fix possibility of chip->fixes being null
  mmc: sdhci-pci: Fix BYT sd card getting stuck in runtime suspend
  mmc: sdhci: Allow for long command timeouts
  mmc: sdio: add a quirk for broken SDIO_CCCR_INTx polling
  mmc: sdhci: fix lockdep error in tuning routine
  mmc: dw_mmc: k3: remove clk_table
  mmc: dw_mmc: fix dw_mci_get_cd
  mmc: dw_mmc: fix sparse non static symbol warning
  mmc: sdhci-esdhc-imx: fix warning during module remove function
  mmc: sdhci-esdhc-imx: fix access hardirq-unsafe lock in atomic context
  mmc: core: sd: implement proper support for sd3.0 au sizes
  mmc: atmel-mci: add vmmc-supply support
  mmc: sdhci-pci: add broken HS200 quirk for Intel Merrifield
  mmc: sdhci: add quirk for broken HS200 support
  mmc: arasan: Add driver for Arasan SDHCI
  mmc: dw_mmc: add dw_mmc-k3 for k3 platform
  mmc: dw_mmc: use slot-gpio to handle cd pin
  mmc: sdhci-pci: add support of O2Micro/BayHubTech SD hosts
  mmc: sdhci-pci: break out definitions to header file
  mmc: tmio: fixup compile error
  ...

Conflicts:
	MAINTAINERS

Pull 9p changes from Eric Van Hensbergen:
 "Included are a new cache model for support of mmap, and several
  cleanups across the filesystem and networking portions of the code"

* tag 'for-3.14-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  9p: update documentation
  9P: introduction of a new cache=mmap model.
  net/9p: remove virtio default hack and set appropriate bits instead
  9p: remove useless 'name' variable and assignment
  9p: fix return value in case in v9fs_fid_xattr_set()
  9p: remove useless variable and assignment
  9p: remove useless assignment
  9p: remove unused 'super_block' struct pointer
  9p: remove never used return variable
  9p: remove unused 'p9_fid' struct pointer
  9p: remove unused 'p9_client' struct pointer

The hostfs_*() callback functions are all only used within
hostfs_kern.c, so make them static.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: user-mode-linux-devel@lists.sourceforge.net
Signed-off-by: Richard Weinberger <richard@nod.at>

...to get smp_store_release().
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Richard Weinberger <richard@nod.at>

temp_stack and mm_count have no users and can be killed.
Signed-off-by: Richard Weinberger <richard@nod.at>

Merge ipmi fixes from Corey Minyard:
 "Just some collected fixes for 3.14.  Nothing huge"

* emailed patches from Corey Minyard <minyard@acm.org>:
  ipmi: Cleanup error return
  ipmi: fix timeout calculation when bmc is disconnected
  ipmi: use USEC_PER_SEC instead of 1000000 for more meaningful
  ipmi: remove deprecated IRQF_DISABLED

Return proper errors for a lot of IPMI failure cases.  Also call
pci_disable_device when IPMI PCI devices are removed.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Loading ipmi_si module while bmc is disconnected, we found the timeout
is longer than 5 secs.  Actually it takes about 3 mins and 20
secs.(HZ=250)

error message as below:
  Dec 12 19:08:59 linux kernel: IPMI BT: timeout in RD_WAIT [ ] 1 retries left
  Dec 12 19:08:59 linux kernel: BT: write 4 bytes seq=0x01 03 18 00 01
  [...]
  Dec 12 19:12:19 linux kernel: IPMI BT: timeout in RD_WAIT [ ]
  Dec 12 19:12:19 linux kernel: failed 2 retries, sending error response
  Dec 12 19:12:19 linux kernel: IPMI: BT reset (takes 5 secs)
  Dec 12 19:12:19 linux kernel: IPMI BT: flag reset [ ]

Function wait_for_msg_done() use schedule_timeout_uninterruptible(1) to
sleep 1 tick, so we should subtract jiffies_to_usecs(1) instead of 100
usecs from timeout.
Reported-by: Hu Shiyuan <hushiyuan@huawei.com>
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use USEC_PER_SEC instead of 1000000, that making the later bugfix
more clearly.
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch proposes to remove the use of the IRQF_DISABLED flag

It's a NOOP since 2.6.35 and it will be removed one day.
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull spi updates from Mark Brown:
 "A respun version of the merges for the pull request previously sent
  with a few additional fixes.  The last two merges were fixed up by
  hand since the branches have moved on and currently have the prior
  merge in them.

  Quite a busy release for the SPI subsystem, mostly in cleanups big and
  small scattered through the stack rather than anything else:

   - New driver for the Broadcom BC63xx HSSPI controller
   - Fix duplicate device registration for ACPI
   - Conversion of s3c64xx to DMAEngine (this pulls in platform and DMA
     changes upon which the transiton depends)
   - Some small optimisations to reduce the amount of time we hold locks
     in the datapath, eliminate some redundant checks and the size of a
     spi_transfer
   - Lots of fixes, cleanups and general enhancements to drivers,
     especially the rspi and Atmel drivers"

* tag 'spi-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (112 commits)
  spi: core: Fix transfer failure when master->transfer_one returns positive value
  spi: Correct set_cs() documentation
  spi: Clarify transfer_one() w.r.t. spi_finalize_current_transfer()
  spi: Spelling s/finised/finished/
  spi: sc18is602: Convert to use bits_per_word_mask
  spi: Remove duplicate code to set default bits_per_word setting
  spi/pxa2xx: fix compilation warning when !CONFIG_PM_SLEEP
  spi: clps711x: Add MODULE_ALIAS to support module auto-loading
  spi: rspi: Add missing clk_disable() calls in error and cleanup paths
  spi: rspi: Spelling s/transmition/transmission/
  spi: rspi: Add support for specifying CPHA/CPOL
  spi/pxa2xx: initialize DMA channels to -1 to prevent inadvertent match
  spi: rspi: Add more QSPI register documentation
  spi: rspi: Add more RSPI register documentation
  spi: rspi: Remove dependency on DMAE for SHMOBILE
  spi/s3c64xx: Correct indentation
  spi: sh: Use spi_sh_clear_bit() instead of open-coded
  spi: bitbang: Grammar s/make to make/to make/
  spi: sh-hspi: Spelling s/recive/receive/
  spi: core: Improve tx/rx_nbits check comments
  ...

Pull regulator updates from Mark Brown:
 "A respin of the merges in the previous pull request with one extra
  fix.

  A quiet release for the regulator API, quite a large number of small
  improvements all over but other than the addition of new drivers for
  the AS3722 and MAX14577 there is nothing of substantial non-local
  impact"

* tag 'regulator-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (47 commits)
  regulator: pfuze100-regulator: Improve dev_info() message
  regulator: pfuze100-regulator: Fix some checkpatch complaints
  regulator: twl: Fix checkpatch issue
  regulator: core: Fix checkpatch issue
  regulator: anatop-regulator: Remove unneeded memset()
  regulator: s5m8767: Update LDO index in s5m8767-regulator.txt
  regulator: as3722: set enable time for SD0/1/6
  regulator: as3722: detect SD0 low-voltage mode
  regulator: tps62360: Fix up a pointer-integer size mismatch warning
  regulator: anatop-regulator: Remove unneeded kstrdup()
  regulator: act8865: Fix build error when !OF
  regulator: act8865: register all regulators regardless of how many are used
  regulator: wm831x-dcdc: Remove unneeded 'err' label
  regulator: anatop-regulator: Add MODULE_ALIAS()
  regulator: act8865: fix incorrect devm_kzalloc for act8865
  regulator: act8865: Remove set_suspend_[en|dis]able implementation
  regulator: act8865: Remove unneeded regulator_unregister() calls
  regulator: s2mps11: Clean up redundant code
  regulator: tps65910: Simplify setting enable_mask for regulators
  regulator: act8865: add device tree binding doc
  ...

Pull regmap updates from Mark Brown:
 "Nothing terribly exciting with regmap this release, mainly a few small
  extensions to allow more devices to be supported:

   - Allow the bulk I/O APIs to be used with no-bus regmaps
   - Support interrupt controllers with zero ack base
   - Warning and spelling fixes"

* tag 'regmap-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: fix a couple of typos
  regmap: Allow regmap_bulk_write() to work for "no-bus" regmaps
  regmap: Allow regmap_bulk_read() to work for "no-bus" regmaps
  regmap: irq: Allow using zero value for ack_base
  regmap: Fix 'ret' would return an uninitialized value

Pull networking updates from David Miller:

 1) BPF debugger and asm tool by Daniel Borkmann.

 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann.

 3) Correct reciprocal_divide and update users, from Hannes Frederic
    Sowa and Daniel Borkmann.

 4) Currently we only have a "set" operation for the hw timestamp socket
    ioctl, add a "get" operation to match.  From Ben Hutchings.

 5) Add better trace events for debugging driver datapath problems, also
    from Ben Hutchings.

 6) Implement auto corking in TCP, from Eric Dumazet.  Basically, if we
    have a small send and a previous packet is already in the qdisc or
    device queue, defer until TX completion or we get more data.

 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko.

 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel
    Borkmann.

 9) Share IP header compression code between Bluetooth and IEEE802154
    layers, from Jukka Rissanen.

10) Fix ipv6 router reachability probing, from Jiri Benc.

11) Allow packets to be captured on macvtap devices, from Vlad Yasevich.

12) Support tunneling in GRO layer, from Jerry Chu.

13) Allow bonding to be configured fully using netlink, from Scott
    Feldman.

14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can
    already get the TCI.  From Atzm Watanabe.

15) New "Heavy Hitter" qdisc, from Terry Lam.

16) Significantly improve the IPSEC support in pktgen, from Fan Du.

17) Allow ipv4 tunnels to cache routes, just like sockets.  From Tom
    Herbert.

18) Add Proportional Integral Enhanced packet scheduler, from Vijay
    Subramanian.

19) Allow openvswitch to mmap'd netlink, from Thomas Graf.

20) Key TCP metrics blobs also by source address, not just destination
    address.  From Christoph Paasch.

21) Support 10G in generic phylib.  From Andy Fleming.

22) Try to short-circuit GRO flow compares using device provided RX
    hash, if provided.  From Tom Herbert.

The wireless and netfilter folks have been busy little bees too.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits)
  net/cxgb4: Fix referencing freed adapter
  ipv6: reallocate addrconf router for ipv6 address when lo device up
  fib_frontend: fix possible NULL pointer dereference
  rtnetlink: remove IFLA_BOND_SLAVE definition
  rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info
  qlcnic: update version to 5.3.55
  qlcnic: Enhance logic to calculate msix vectors.
  qlcnic: Refactor interrupt coalescing code for all adapters.
  qlcnic: Update poll controller code path
  qlcnic: Interrupt code cleanup
  qlcnic: Enhance Tx timeout debugging.
  qlcnic: Use bool for rx_mac_learn.
  bonding: fix u64 division
  rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC
  sfc: Use the correct maximum TX DMA ring size for SFC9100
  Add Shradha Shah as the sfc driver maintainer.
  net/vxlan: Share RX skb de-marking and checksum checks with ovs
  tulip: cleanup by using ARRAY_SIZE()
  ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called
  net/cxgb4: Don't retrieve stats during recovery
  ...

Pull perf fixes from Ingo Molnar:
 "A handful of tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf symbols: Load map before using map->map_ip()
  perf tools: Fix traceevent plugin path definitions
  perf symbols: Fix JIT symbol resolution on heap
  perf stat: Fix memory corruption of xyarray when cpumask is used
  perf evsel: Remove duplicate member zeroing after free
  perf tools: Ensure sscanf does not overrun the "mem" field
  perf stat: fix NULL pointer reference bug with event unit
  perf tools: Add support for the xtensa architecture
  perf session: Free cpu_map in perf_session__cpu_bitmap
  perf timechart: Fix wrong SVG height

Pull scheduler fixes from Ingo Molnar:
 "A couple of regression fixes mostly hitting virtualized setups, but
  also some bare metal systems"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/x86/tsc: Initialize multiplier to 0
  sched/clock: Fixup early initialization
  sched/preempt/x86: Fix voluntary preempt for x86
  Revert "sched: Fix sleep time double accounting in enqueue entity"

Pull user namespaces work from Eric Biederman:
 "The work to convert the kernel to use kuid_t and kgid_t has been
  finished since 3.12 so it is time to remove the scaffolding that
  allowed the work to progress incrementally.

  The first patch on this branch just removes the scaffolding, ensuring
  we will always get compile errors if people accidentally try the
  userspace and the kernel uid and gid types.  The second patch an
  overlooked and unused chunk of mips code that that fails to build
  after the first patch.

  The code hasn't been in linux-next for long (as I was out of it and
  could not sheppared the cold properly) but the patch has been around
  for a long time just waiting for the day when I had finished the
  uid/gid conversions.  Putting the code in linux-next did find the
  compile failure on mips so I took the time to get that fix reviewed
  and included.  Beyond that I am not too worried about errors because
  all these two patches do is delete a modest amount of code"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  MIPS: VPE: Remove vpe_getuid and vpe_getgid
  userns:  userns: Remove UIDGID_STRICT_TYPE_CHECKS

Pull ARC changes from Vineet Gupta:
 - IPI optimization and cleanups
 - Support for bootloader provided external Device Tree blobs

* tag 'arc-v3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: [cmdline] support External Device Trees from u-boot
  ARC: [cmdline] uboot cmdline handling rework
  ARC: [SMP] optimize IPI send and receive
  ARC: [SMP] simplify IPI code
  ARC: [SMP] cpu halt interface doesn't need "self" cpu-id
  ARC: [SMP] IPI ACK interface doesn't need "self" cpu-id
  ARC: [SMP] cpumask not needed in IPI send path

Pull Xtensa patches from Chris Zankel:
 "The major changes are adding support for SMP for Xtensa, fixing and
  cleaning up the ISS (simulator) network driver, and better support for
  device trees"

* tag 'xtensa-next-20140123' of git://github.com/czankel/xtensa-linux: (40 commits)
  xtensa: implement ndelay
  xtensa: clean up udelay
  xtensa: enable HAVE_PERF_EVENTS
  xtensa: remap io area defined in device tree
  xtensa: support default device tree buses
  xtensa: initialize device tree clock sources
  xtensa: xtfpga: fix definitions of platform devices
  xtensa: standardize devicetree cpu compatible strings
  xtensa: avoid duplicate of IO range definitions
  xtensa: fix ATOMCTL register documentation
  xtensa: Enable irqs after cpu is set online
  xtensa: ISS: raise network polling rate to 10 times/sec
  xtensa: remove unused XTENSA_ISS_NETWORK Kconfig parameter
  xtensa: ISS: avoid simple_strtoul usage
  xtensa: Switch to sched_clock_register()
  xtensa: implement CPU hotplug
  xtensa: add SMP support
  xtensa: add MX irqchip
  xtensa: clear timer IRQ unconditionally in its handler
  xtensa: clean up do_interrupt/do_IRQ
  ...

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

  * Fix traceevent plugin path definitions (Josh Boyer)

  * Load map before using map->map_ip() (Masami Hiramatsu)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull vfio update from Alex Williamson:
 - convert to misc driver to support module auto loading
 - remove unnecessary and dangerous use of device_lock

* tag 'vfio-v3.14-rc1' of git://github.com/awilliam/linux-vfio:
  vfio-pci: Don't use device_lock around AER interrupt setup
  vfio: Convert control interface to misc driver
  misc: Reserve minor for VFIO

Pull md updates from Neil Brown:
 "All bug fixes, two tagged for -stable"

* tag 'md/3.14' of git://neil.brown.name/md:
  md/raid5: close recently introduced race in stripe_head management.
  md/raid5: fix long-standing problem with bitmap handling on write failure.
  md: check command validity early in md_ioctl().
  md: ensure metadata is writen after raid level change.
  md/raid10: avoid fullsync when not necessary.
  md: allow a partially recovered device to be hot-added to an array.
  md: Change handling of save_raid_disk and metadata update during recovery.

Pull devicetree updates from Rob Herring:
 - Add new documents with guidelines for DT binding stability and review
   process.  This is one of the outcomes of Kernel Summit DT discussions
 - Remove a bunch of device_type usage which is only for OF and
   deprecated with FDT
 - Fix a long standing issue with compatible string match ordering
 - Various minor binding documentation updates

* tag 'devicetree-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: add rockchip vendor prefix
  serial: vt8500: Add missing binding document for arch-vt8500 serial driver.
  dt/bindings: submitting patches and ABI documents
  DT: Add vendor prefix for Emerging Display Technologies
  of: add vendor prefixe for EPFL
  of: add vendor prefix for Gumstix
  of: add vendor prefix for Ka-Ro electronics GmbH
  devicetree: macb: Document clock properties
  dts: bindings: trivial clock bindings doc fixes
  of: Fix __of_device_is_available check
  dt/bindings: Remove device_type "serial" from marvell,mv64360-mpsc
  dt/bindings: remove device_type "network" references
  dt/bindings: remove users of device_type "mdio"
  dt/bindings: Remove references to linux,phandle properties
  dt/bindings: Remove all references to device_type "ethernet-phy"
  of: irq: Ignore disabled intc's when searching map
  of: irq: Ignore disabled interrupt controllers
  OF: base: match each node compatible against all given matches first
  dt-bindings: add GIC-400 binding

Pull infiniband updates from Roland Dreier:
 "Main batch of InfiniBand/RDMA changes for 3.14:
   - Flow steering for InfiniBand UD traffic
   - IP-based addressing for IBoE aka RoCE
   - Pass SRP submaintainership from Dave to Bart
   - SRP transport fixes from Bart
   - Add the new Cisco usNIC low-level device driver
   - Various other fixes"

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (75 commits)
  IB/mlx5: Verify reserved fields are cleared
  IB/mlx5: Remove old field for create mkey mailbox
  IB/mlx5: Abort driver cleanup if teardown hca fails
  IB/mlx5: Allow creation of QPs with zero-length work queues
  mlx5_core: Fix PowerPC support
  mlx5_core: Improve debugfs readability
  IB/mlx5: Add support for resize CQ
  IB/mlx5: Implement modify CQ
  IB/mlx5: Make sure doorbell record is visible before doorbell
  mlx5_core: Use mlx5 core style warning
  IB/mlx5: Clear out struct before create QP command
  mlx5_core: Fix out arg size in access_register command
  RDMA/nes: Slight optimization of Ethernet address compare
  IB/qib: Fix QP check when looping back to/from QP1
  RDMA/cxgb4: Fix gcc warning on 32-bit arch
  IB/usnic: Remove unused includes of <linux/version.h>
  RDMA/amso1100: Add check if cache memory was allocated before freeing it
  IPoIB: Report operstate consistently when brought up without a link
  IB/core: Fix unused variable warning
  RDMA/cma: Handle global/non-linklocal IPv6 addresses in cma_check_linklocal()
  ...

Pull input subsystem updates from Dmitry Torokhov:
 "Just a swath of driver fixes and cleanups, no new drivers this time
  (although ALPS now supports one of the newer protocols, more to come)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
  Input: wacom - add support for DTU-1031
  Input: wacom - fix wacom->shared guards for dual input devices
  Input: edt_ft5x06 - use devm_* functions where appropriate
  Input: hyperv-keyboard - pass through 0xE1 prefix
  Input: logips2pp - fix spelling s/reciver/receiver/
  Input: delete non-required instances of include <linux/init.h>
  Input: twl4030-keypad - convert to using managed resources
  Input: twl6040-vibra - remove unneeded check for CONFIG_OF
  Input: twl4030-keypad - add device tree support
  Input: twl6040-vibra - add missing of_node_put
  Input: twl4030-vibra - add missing of_node_put
  Input: i8042 - cleanup SERIO_I8042 dependencies
  Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on x86
  Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on unicore32
  Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on sparc
  Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO for SH_CAYMAN
  Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on powerpc
  Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on mips
  Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on IA64
  Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on ARM/Footbridge
  ...

Pull fbdev changes from Tomi Valkeinen:
 "This is a rather boring pull request.  There is one new fb driver,
  OpenCores VGA/LCD, but other than that it's just minor cleanups and
  fixes"

* tag 'fbdev-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (51 commits)
  i810: delete useless variable
  video: add OpenCores VGA/LCD framebuffer driver
  video/logo: Remove MIPS-specific include section
  tgafb: potential NULL dereference in init
  video: mmp: Using plain integer as NULL pointer
  video: mmp: delete a stray mutex_unlock()
  video: amba-clcd: Make CLCD driver available on more platforms
  video: Replace local macro with PCI standard macro
  fbmem: really support wildcard video=options for all fbdev drivers
  video: vgacon: Don't build on arm64
  video: mx3fb: Allow blocking during framebuffer allocation
  fbcon: Fix memory leak in fbcon_exit().
  fbcon: trivial optimization for fbcon_exit
  video: pxa168fb: Cleanup pxa168fb.h file
  video: pxa: Cleanup video-pxafb.h header
  video: msm: Cleanup video-msm_fb.h header
  video: ep93xx: Cleanup video-ep93xx.h header
  video: mxsfb: fix broken videomode selection
  video: mxsfb: convert pr_debug()/dev_dbg() to pr_err()/dev_err() for error messages
  video: vmlfb: remove unnecessary pci_set_drvdata()
  ...

Pull thermal management updates from Zhang Rui:
 "This time, the biggest change is the work of representing hardware
  thermal properties in device tree infrastructure.

  This work includes the introduction of a device tree bindings for
  describing the hardware thermal behavior and limits, and also a parser
  to read and interpret the data, and build thermal zones and thermal
  binding parameters.  It also contains three examples on how to use the
  new representation on sensor devices, using three different drivers to
  accomplish it.  One driver is in thermal subsystem, the TI SoC
  thermal, and the other two drivers are in hwmon subsystem.

  Actually, this would be the first step of the complete work because we
  still need to check other potential drivers to be converted and then
  validate the proposed API.  But the reason why I include it in this
  pull request is that, first, this change does not hurt any others
  without using this approach, second, the principle and concept of this
  change would not break after converting the remaining drivers.  BTW,
  as you can see, there are several points in this change that do not
  belong to thermal subsystem.  Because it has been suggested by Guenter
  R that in such cases, it is recommended to send the complete series
  via one single subsystem.

  Specifics:

   - representing hardware thermal properties in device tree
     infrastructure

   - fix a regression that the imx thermal driver breaks system suspend.

   - introduce ACPI INT3403 thermal driver to retrieve temperature data
     from the INT3403 ACPI device object present on some systems.

   - introduce debug statement for thermal core and step_wise governor.

   - assorted fixes and cleanups for thermal core, cpu cooling, exynos
     thrmal, intel powerclamp and imx thermal driver"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (34 commits)
  thermal: remove const flag from .ops of imx thermal
  Thermal: update thermal zone device after setting emul_temp
  intel_powerclamp: Fix cstate counter detection.
  thermal: imx: add necessary clk operation
  Thermal cpu cooling: return error if no valid cpu frequency entry
  thermal: fix cpu_cooling max_level behavior
  thermal: rcar-thermal: Enable driver compilation with COMPILE_TEST
  thermal: debug: add debug statement for core and step_wise
  thermal: imx_thermal: add module device table
  drivers: thermal: Mark function as static in x86_pkg_temp_thermal.c
  thermal:samsung: fix compilation warning
  thermal: imx: correct suspend/resume flow
  thermal: exynos: fix error return code
  Thermal: ACPI INT3403 thermal driver
  MAINTAINERS: add thermal bindings entry in thermal domain
  arm: dts: make OMAP4460 bandgap node to belong to OCP
  arm: dts: make OMAP443x bandgap node to belong to OCP
  arm: dts: add cooling properties on omap5 cpu node
  arm: dts: add omap5 thermal data
  arm: dts: add omap5 CORE thermal data
  ...

The adapter is freed before we check its flags. It was caused
by commit 144be3d9 ("net/cxgb4: Avoid disabling PCI device for
towice"). The problem was reported by Intel's "0-day" tool.

The patch fixes it to avoid reverting commit 144be3d9.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 25fb6ca4
"net IPv6 : Fix broken IPv6 routing table after loopback down-up"
allocates addrconf router for ipv6 address when lo device up.
but commit a881ae1f
"ipv6:don't call addrconf_dst_alloc again when enable lo" breaks
this behavior.

Since the addrconf router is moved to the garbage list when
lo device down, we should release this router and rellocate
a new one for ipv6 address when lo device up.

This patch solves bug 67951 on bugzilla
https://bugzilla.kernel.org/show_bug.cgi?id=67951

change from v1:
use ip6_rt_put to repleace ip6_del_rt, thanks Hannes!
change code style, suggested by Sergei.

CC: Sabrina Dubroca <sd@queasysnail.net>
CC: Hannes Frederic Sowa <hannes@stressinduktion.org>
Reported-by: Weilong Chen <chenweilong@huawei.com>
Signed-off-by: Weilong Chen <chenweilong@huawei.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The two commits 0115e8e3 (net: remove delay at device dismantle) and
748e2d93 (net: reinstate rtnl in call_netdevice_notifiers()) silently
removed a NULL pointer check for in_dev since Linux 3.7.

This patch re-introduces this check as it causes crashing the kernel when
setting small mtu values on non-ip capable netdevices.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull ACPI and power management updates from Rafael Wysocki:
 "As far as the number of commits goes, the top spot belongs to ACPI
  this time with cpufreq in the second position and a handful of PM
  core, PNP and cpuidle updates.  They are fixes and cleanups mostly, as
  usual, with a couple of new features in the mix.

  The most visible change is probably that we will create struct
  acpi_device objects (visible in sysfs) for all devices represented in
  the ACPI tables regardless of their status and there will be a new
  sysfs attribute under those objects allowing user space to check that
  status via _STA.

  Consequently, ACPI device eject or generally hot-removal will not
  delete those objects, unless the table containing the corresponding
  namespace nodes is unloaded, which is extremely rare.  Also ACPI
  container hotplug will be handled quite a bit differently and cpufreq
  will support CPU boost ("turbo") generically and not only in the
  acpi-cpufreq driver.

  Specifics:

   - ACPI core changes to make it create a struct acpi_device object for
     every device represented in the ACPI tables during all namespace
     scans regardless of the current status of that device.  In
     accordance with this, ACPI hotplug operations will not delete those
     objects, unless the underlying ACPI tables go away.

   - On top of the above, new sysfs attribute for ACPI device objects
     allowing user space to check device status by triggering the
     execution of _STA for its ACPI object.  From Srinivas Pandruvada.

   - ACPI core hotplug changes reducing code duplication, integrating
     the PCI root hotplug with the core and reworking container hotplug.

   - ACPI core simplifications making it use ACPI_COMPANION() in the
     code "glueing" ACPI device objects to "physical" devices.

   - ACPICA update to upstream version 20131218.  This adds support for
     the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves
     debug facilities.  From Bob Moore, Lv Zheng and Betty Dall.

   - Init code change to carry out the early ACPI initialization
     earlier.  That should allow us to use ACPI during the timekeeping
     initialization and possibly to simplify the EFI initialization too.
     From Chun-Yi Lee.

   - Clenups of the inclusions of ACPI headers in many places all over
     from Lv Zheng and Rashika Kheria (work in progress).

   - New helper for ACPI _DSM execution and rework of the code in
     drivers that uses _DSM to execute it via the new helper.  From
     Jiang Liu.

   - New Win8 OSI blacklist entries from Takashi Iwai.

   - Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun
     Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava,
     Rashika Kheria, Tang Chen, Zhang Rui.

   - intel_pstate driver updates, including proper Baytrail support,
     from Dirk Brandewie and intel_pstate documentation from Ramkumar
     Ramachandra.

   - Generic CPU boost ("turbo") support for cpufreq from Lukasz
     Majewski.

   - powernow-k6 cpufreq driver fixes from Mikulas Patocka.

   - cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark
     Brown.

   - Assorted cpufreq drivers fixes and cleanups from Anson Huang, John
     Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh
     Kumar.

   - cpuidle cleanups from Bartlomiej Zolnierkiewicz.

   - Support for hibernation APM events from Bin Shi.

   - Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC
     disabled during thaw transitions from Bjørn Mork.

   - PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf
     Hansson.

   - PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente
     Kurusa, Rashika Kheria.

   - New tool for profiling system suspend from Todd E Brandt and a
     cpupower tool cleanup from One Thousand Gnomes"

* tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits)
  thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412)
  cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ
  Documentation: cpufreq / boost: Update BOOST documentation
  cpufreq: exynos: Extend Exynos cpufreq driver to support boost
  cpufreq / boost: Kconfig: Support for software-managed BOOST
  acpi-cpufreq: Adjust the code to use the common boost attribute
  cpufreq: Add boost frequency support in core
  intel_pstate: Add trace point to report internal state.
  cpufreq: introduce cpufreq_generic_get() routine
  ARM: SA1100: Create dummy clk_get_rate() to avoid build failures
  cpufreq: stats: create sysfs entries when cpufreq_stats is a module
  cpufreq: stats: free table and remove sysfs entry in a single routine
  cpufreq: stats: remove hotplug notifiers
  cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly
  cpufreq: speedstep: remove unused speedstep_get_state
  platform: introduce OF style 'modalias' support for platform bus
  PM / tools: new tool for suspend/resume performance optimization
  ACPI: fix module autoloading for ACPI enumerated devices
  ACPI: add module autoloading support for ACPI enumerated devices
  ACPI: fix create_modalias() return value handling
  ...

John W. Linville says:

====================
Please pull these fixes for the 3.14 stream!

For the iwlwifi fix, Emmanuel says:

"A critical bug has been reported on all NICs supported by iwldvm.
iwlwifi would simply panic upon interface up This patch fixes this. The
offending code is by me and is present in wireless-next.git and hence in
net-next.git."

Along with that...

Andreas Fenkart corrects a WoWLAN problem with mwifiex.

Roman Dubtsov adds a device ID to rt2800usb.

Sujith Manoharan re-enables a mistakenly commented-out line of code in
ath9k, and also fixes and interrupt mitigation issue for that driver.

ZHAO Gang fixes an incorrect assignment (reverse/wrong API call) in b43.

Please let me know if there are problems!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem

quick pass to update the documentation to include instructions for
the new cache=mmap mode as well as clean up some out-of-date bits.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

This is in net-next only, for couple of days. Not used anymore, and never
should have been. So just remove it and pretend it was never there.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>