- 10 Aug, 2015 40 commits
-
-
Ming Lei authored
commit e56f698b upstream. It is reasonable to set default timeout of request as 30 seconds instead of 30000 ticks, which may be 300 seconds if HZ is 100, for example, some arm64 based systems may choose 100 HZ. Signed-off-by:
Ming Lei <ming.lei@canonical.com> Fixes: c76cbbcf ("blk-mq: put blk_queue_rq_timeout together in blk_mq_init_queue()" Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Hurley authored
commit 3b19e032 upstream. When handling signalling char, claim the termios write lock before signalling waiting readers and writers to prevent further i/o before flushing the echo and output buffers. This prevents a userspace signal handler which may output from racing the terminal flush. Reference: Bugzilla #99351 ("Output truncated in ssh session after...") Fixes: commit d2b6f447 ("n_tty: Fix signal handling flushes") Reported-by:
Filipe Brandenburger <filbranden@google.com> Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Wengang Wang authored
commit 4fabb594 upstream. Fixes: 3e0249f9 ("RDS/IB: add refcount tracking to struct rds_ib_device") There lacks a dropping on rds_ib_device.refcount in case rds_ib_alloc_fmr failed(mr pool running out). this lead to the refcount overflow. A complain in line 117(see following) is seen. From vmcore: s_ib_rdma_mr_pool_depleted is 2147485544 and rds_ibdev->refcount is -2147475448. That is the evidence the mr pool is used up. so rds_ib_alloc_fmr is very likely to return ERR_PTR(-EAGAIN). 115 void rds_ib_dev_put(struct rds_ib_device *rds_ibdev) 116 { 117 BUG_ON(atomic_read(&rds_ibdev->refcount) <= 0); 118 if (atomic_dec_and_test(&rds_ibdev->refcount)) 119 queue_work(rds_wq, &rds_ibdev->free_work); 120 } fix is to drop refcount when rds_ib_alloc_fmr failed. Signed-off-by:
Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by:
Haggai Eran <haggaie@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Vineet Gupta authored
commit 80f42084 upstream. ARCompact/ARCv2 ISA provide that any instructions which deals with bitpos/count operand ASL, LSL, BSET, BCLR, BMSK .... will only consider lower 5 bits. i.e. auto-clamp the pos to 0-31. ARC Linux bitops exploited this fact by NOT explicitly masking out upper bits for @nr operand in general, saving a bunch of AND/BMSK instructions in generated code around bitops. While this micro-optimization has worked well over years it is NOT safe as shifting a number with a value, greater than native size is "undefined" per "C" spec. So as it turns outm EZChip ran into this eventually, in their massive muti-core SMP build with 64 cpus. There was a test_bit() inside a loop from 63 to 0 and gcc was weirdly optimizing away the first iteration (so it was really adhering to standard by implementing undefined behaviour vs. removing all the iterations which were phony i.e. (1 << [63..32]) | for i = 63 to 0 | X = ( 1 << i ) | if X == 0 | continue So fix the code to do the explicit masking at the expense of generating additional instructions. Fortunately, this can be mitigated to a large extent as gcc has SHIFT_COUNT_TRUNCATED which allows combiner to fold masking into shift operation itself. It is currently not enabled in ARC gcc backend, but could be done after a bit of testing. Fixes STAR 9000866918 ("unsafe "undefined behavior" code in kernel") Reported-by:
Noam Camus <noamc@ezchip.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Vineet Gupta authored
commit 04e2eee4 upstream. No semantical changes ! Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
-
Dmitry Skorodumov authored
commit 7cc03e48 upstream. The efi_info structure stores low 32 bits of memory map in efi_memmap and high 32 bits in efi_memmap_hi. While constructing pointer in the setup_e820(), need to take into account all 64 bit of the pointer. It is because on 64bit machine the function efi_get_memory_map() may return full 64bit pointer and before the patch that pointer was truncated. The issue is triggered on Parallles virtual machine and fixed with this patch. Signed-off-by:
Dmitry Skorodumov <sdmitry@parallels.com> Cc: Denis V. Lunev <den@openvz.org> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
-
Ricardo Neri authored
commit 9115c758 upstream. Even though it is documented how to specifiy efi parameters, it is possible to cause a kernel panic due to a dereference of a NULL pointer when parsing such parameters if "efi" alone is given: PANIC: early exception 0e rip 10:ffffffff812fb361 error 0 cr2 0 [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.2.0-rc1+ #450 [ 0.000000] ffffffff81fe20a9 ffffffff81e03d50 ffffffff8184bb0f 00000000000003f8 [ 0.000000] 0000000000000000 ffffffff81e03e08 ffffffff81f371a1 64656c62616e6520 [ 0.000000] 0000000000000069 000000000000005f 0000000000000000 0000000000000000 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff8184bb0f>] dump_stack+0x45/0x57 [ 0.000000] [<ffffffff81f371a1>] early_idt_handler_common+0x81/0xae [ 0.000000] [<ffffffff812fb361>] ? parse_option_str+0x11/0x90 [ 0.000000] [<ffffffff81f4dd69>] arch_parse_efi_cmdline+0x15/0x42 [ 0.000000] [<ffffffff81f376e1>] do_early_param+0x50/0x8a [ 0.000000] [<ffffffff8106b1b3>] parse_args+0x1e3/0x400 [ 0.000000] [<ffffffff81f37a43>] parse_early_options+0x24/0x28 [ 0.000000] [<ffffffff81f37691>] ? loglevel+0x31/0x31 [ 0.000000] [<ffffffff81f37a78>] parse_early_param+0x31/0x3d [ 0.000000] [<ffffffff81f3ae98>] setup_arch+0x2de/0xc08 [ 0.000000] [<ffffffff8109629a>] ? vprintk_default+0x1a/0x20 [ 0.000000] [<ffffffff81f37b20>] start_kernel+0x90/0x423 [ 0.000000] [<ffffffff81f37495>] x86_64_start_reservations+0x2a/0x2c [ 0.000000] [<ffffffff81f37582>] x86_64_start_kernel+0xeb/0xef [ 0.000000] RIP 0xffffffff81ba2efc This panic is not reproducible with "efi=" as this will result in a non-NULL zero-length string. Thus, verify that the pointer to the parameter string is not NULL. This is consistent with other parameter-parsing functions which check for NULL pointers. Signed-off-by:
Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Signed-off-by:
-
Ard Biesheuvel authored
commit f91b1fea upstream. At boot, the UTF-16 UEFI vendor string is copied from the system table into a char array with a size of 100 bytes. However, this size of 100 bytes is also used for memremapping() the source, which may not be sufficient if the vendor string exceeds 50 UTF-16 characters, and the placement of the vendor string inside a 4 KB page happens to leave the end unmapped. So use the correct '100 * sizeof(efi_char16_t)' for the size of the mapping. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Fixes: f84d0275 ("arm64: add EFI runtime services") Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Luck, Tony authored
commit 4c62360d upstream. The memory error record structure includes as its first field a bitmask of which subsequent fields are valid. The allows new fields to be added to the structure while keeping compatibility with older software that parses these records. This mechanism was used between versions 2.2 and 2.3 to add four new fields, growing the size of the structure from 73 bytes to 80. But Linux just added all the new fields so this test: if (gdata->error_data_length >= sizeof(*mem_err)) cper_print_mem(newpfx, mem_err); else goto err_section_too_small; now make Linux complain about old format records being too short. Add a definition for the old format of the structure and use that for the minimum size check. Pass the actual size to cper_print_mem() so it can sanity check the validation_bits field to ensure that if a BIOS using the old format sets bits as if it were new, we won't access fields beyond the end of the structure. Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
-
Dave Hansen authored
commit bbc03778 upstream. flush_tlb_info->flush_start/end are both normal virtual addresses. When calculating 'nr_pages' (only used for the tracepoint), I neglected to put parenthesis in. Thanks to David Koufaty for pointing this out. Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@sr71.net Link: http://lkml.kernel.org/r/20150720230153.9E834081@viggo.jf.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Tomas Winkler authored
commit 154322f4 upstream. chrdev_open() increases reference counter on cdev->owner. Instead of assigning the owner to mei subsystem, the owner has to be set to the underlaying HW module (mei_me or mei_txe), so once the device is opened the HW module cannot be unloaded. Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
-
Zhuang Jin Can authored
commit aca3a048 upstream. Port link change with port in resume state should not be reported to usbcore, as this is an internal state to be handled by xhci driver. Reporting PLC to usbcore may cause usbcore clearing PLC first and port change event irq won't be generated. Signed-off-by:
Zhuang Jin Can <jin.can.zhuang@intel.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Zhuang Jin Can authored
commit fac4271d upstream. When the link is just waken, it's in Resume state, and driver sets PLS to U0. This refers to Phase 1. Phase 2 refers to when the link has completed the transition from Resume state to U0. With the fix of xhci: report U3 when link is in resume state, it also exposes an issue that usb3 roothub and controller can suspend right after phase 1, and this causes a hard hang in controller. To fix the issue, we need to prevent usb3 bus suspend if any port is resuming in phase 1. [merge separate USB2 and USB3 port resume checking to one -Mathias] Signed-off-by:
-
Zhuang Jin Can authored
commit 243292a2 upstream. xhci_hub_report_usb3_link_state() returns pls as U0 when the link is in resume state, and this causes usb core to think the link is in U0 while actually it's in resume state. When usb core transfers control request on the link, it fails with TRB error as the link is not ready for transfer. To fix the issue, report U3 when the link is in resume state, thus usb core knows the link it's not ready for transfer. Signed-off-by:
-
Brian Campbell authored
commit 326124a0 upstream. When resetting a device the number of active TTs may need to be corrected by xhci_update_tt_active_eps, but the number of old active endpoints supplied to it was always zero, so the number of TTs and the bandwidth reserved for them was not updated, and could rise unnecessarily. This affected systems using Intel's Patherpoint chipset, which rely on software bandwidth checking. For example, a Lenovo X230 would lose the ability to use ports on the docking station after enough suspend/resume cycles because the bandwidth calculated would rise with every cycle when a suitable device is attached. The correct number of active endpoints is calculated in the same way as in xhci_reserve_bandwidth. Signed-off-by:
Brian Campbell <bacam@z273.org.uk> Signed-off-by:
-
Peter Hurley authored
commit e144c58c upstream. While closing, new rx data may be received after the input buffers have been flushed but before stop_rx() halts receiving [1]. The new data might not be processed by flush_to_ldisc() until after uart_shutdown() and normal input processing is re-enabled (ie., tty->closing = 0). The race is outlined below: CPU 0 | CPU 1 | uart_close() | tty_port_close_start() | tty->closing = 1 | tty_ldisc_flush() | | => IRQ | while (LSR & data ready) | uart_insert_char() | tty_flip_buffer_push() | <= EOI stop_rx() | . uart_shutdown() | . free xmit.buf | . tty_port_tty_set(NULL) | . tty->closing = 0 | . | flush_to_ldisc() | n_tty_receive_buf_common() | __receive_buf() | ... | commit_echoes() | uart_flush_chars() | __uart_start() | ** OOPS on port.tty deref ** tty_ldisc_flush() | Input processing must be prevented from echoing (tty->closing = 1) until _after_ the input buffers have been flushed again at the end of uart_close(). [1] In fact, some input may actually be buffered _after_ stop_rx() since the rx interrupt may have already triggered but not yet been handled when stop_rx() disables rx interrupts. Fixes: 2e758910 ("serial: core: Flush ldisc after dropping port mutex in uart_close()") Reported-by:
Robert Elliott <elliott@hp.com> Signed-off-by:
-
David Jander authored
commit 907eda32 upstream. This reverts commit 068500e0. According to some tests, SDMA support is broken at least for i.MX6 without HW flow control. Different forms of data-corruption appear either with the ROM firmware for the SDMA controller as well as when loading Freescale provided SDMA firmware versions 1.1 or 3.1. Signed-off-by:
David Jander <david@protonic.nl> Signed-off-by:
-
Oliver Neukum authored
commit 5fb2c782 upstream. This device automatically switches itself to another mode (0x1405) unless the specific access pattern of Windows is followed in its initial mode. That makes a dirty unmount of the internal storage devices inevitable if they are mounted. So the card reader of such a device should be ignored, lest an unclean removal become inevitable. This replaces an earlier patch that ignored all LUNs of this device. That patch was overly broad. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reviewed-by:
Lars Melin <larsm17@gmail.com> Signed-off-by:
-
Lior Amsalem authored
commit 945b4744 upstream. This commit adds the necessary quirk to make the Marvell 4140 SATA PMP work properly. This PMP doesn't like SRST on port number 4 (the host port) so this commit marks this port as not supporting SRST. Signed-off-by:
Lior Amsalem <alior@marvell.com> Reviewed-by:
Nadav Haklai <nadavh@marvell.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
commit 32c848e3 upstream. Status of enabling suspend mode for regulator was stored in bitmap-like long integer. However since adding support for S2MPU02 the number of regulators exceeded 32 so on devices with more than 32 regulators (S2MPU02 and S2MPS13) overflow happens when shifting the bit. This could lead to enabling suspend mode for completely different regulator than intended or to switching different regulator to other mode (e.g. from always enabled to controlled by PWRHOLD pin). Both cases could result in larger energy usage and issues when suspending to RAM. Fixes: 00e2573d ("regulator: s2mps11: Add support S2MPU02 regulator device") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Tejun Heo authored
commit 5f6c2d2b upstream. When a blkcg configuration is targeted to a partition rather than a whole device, blkg_conf_prep fails with -EINVAL; unfortunately, it forgets to put the gendisk ref in that case. Fix it. Signed-off-by:
-
Bernhard Bender authored
commit 96849170 upstream. This patch fixes a problem in the usbtouchscreen driver for DMC TSC-30 touch screen. Due to a missing delay between the RESET and SET_RATE commands, the touch screen may become unresponsive during system startup or driver loading. According to the DMC documentation, a delay is needed after the RESET command to allow the chip to complete its internal initialization. As this delay is not guaranteed, we had a system where the touch screen occasionally did not send any touch data. There was no other indication of the problem. The patch fixes the problem by adding a 150ms delay between the RESET and SET_RATE commands. Suggested-by:
Jakob Mustafa <jakob.mustafa@bytecmed.com> Signed-off-by:
Bernhard Bender <bernhard.bender@bytecmed.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Chris Metcalf authored
commit 3f81d244 upstream. We were previously using free_bootmem() and just getting lucky that nothing too bad happened. Signed-off-by:
Chris Metcalf <cmetcalf@ezchip.com> Signed-off-by:
-
Sascha Hauer authored
commit f6ee9b58 upstream. DMA transfers must be greater than the watermark level size. spi_imx->rx_wml and spi_imx->tx_wml contain the watermark level in 32bit words whereas struct spi_transfer contains the transfer len in bytes. Fix the check if DMA is possible for a transfer accordingly. This fixes transfers with sizes between 33 and 128 bytes for which previously was claimed that DMA is possible. Fixes: f62caccd (spi: spi-imx: add DMA support) Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
Sifan Naeem authored
commit 6a806a21 upstream. Setting the Same Edge bit indicates to the spfi block to receive and transmit data on the same edge of the spfi clock, which in turn doubles the operating frequency of spfi. The maximum supported frequency is limited to 1/4th of the spfi input clock, but without this bit set the maximum would be 1/8th of the input clock. The current driver calculates the divisor with maximum speed at 1/4th of the input clock, this would fail if the requested frequency is higher than 1/8 of the input clock. Any requests for 1/8th of the input clock would still pass. Fixes: 8543d0e7 ("spi: img-spfi: Limit bit clock to 1/4th of input clock") Signed-off-by:
Sifan Naeem <sifan.naeem@imgtec.com> Signed-off-by:
-
NeilBrown authored
commit 34cab6f4 upstream. When we get a read error from the last working device, we don't try to repair it, and don't fail the device. We simple report a read error to the caller. However the current test for 'is this the last working device' is wrong. When there is only one fully working device, it assumes that a non-faulty device is that device. However a spare which is rebuilding would be non-faulty but so not the only working device. So change the test from "!Faulty" to "In_sync". If ->degraded says there is only one fully working device and this device is in_sync, this must be the one. This bug has existed since we allowed read_balance to read from a recovering spare in v3.0 Reported-and-tested-by:
Alexander Lyakas <alex.bolshoy@gmail.com> Fixes: 76073054 ("md/raid1: clean up read_balance.") Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
-
Emmanuel Grumbach authored
commit f9e5554c upstream. For 8000 series, we need to access the device to know what firmware to load. Before we do so, we need to prepare the device otherwise we might not be able to access the hardware. Fixes: c278754a21e6 ("iwlwifi: mvm: support family 8000 B2/C steps") Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Liad Kaufman authored
commit be88a1ad upstream. This fixes the byte order copying in the MAO (Mac Override Section) section from the PNVM, as the byte swapping is not required anymore in the 8000 family. Due to the byte swapping, the driver was reporting an incorrect MAC adddress. Signed-off-by:
Liad Kaufman <liad.kaufman@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
commit 923a8c1d upstream. When BT is active, we want to avoid the shared antenna for management frame to make sure we don't disturb BT. There was a bug in that code because it chose the antenna BIT(ANT_A) where ANT_A is already a bitmap (0x1). This means that the antenna chosen in the end was ANT_B. While this is not optimal on devices with 2 antennas (it'd disturb BT), it is critical on single antenna devices like 3160 which couldn't connect at all when BT was active. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=97181 Fixes: 34c8b24f ("iwlwifi: mvm: BT Coex - avoid the shared antenna for management frames") Signed-off-by:
-
Antonio Borneo authored
commit 6debce6f upstream. Current implementation of cp2112_raw_event() only accepts one data report at a time. If last received data report is not fully handled yet, a new incoming data report will overwrite it. In such case we don't guaranteed to propagate the correct incoming data. The trivial fix implemented here forces a single report at a time by requesting in cp2112_read() no more than 61 byte of data, which is the payload size of a single data report. Signed-off-by:
Antonio Borneo <borneo.antonio@gmail.com> Tested-by:
Ellen Wang <ellen@cumulusnetworks.com> Signed-off-by:
Jiri Kosina <jkosina@suse.com> Signed-off-by:
-
Jingju Hou authored
commit 9cd76049 upstream. pdev->dev.platform_data is not initialized if match is true in function sdhci_pxav3_probe. Just local variable pdata is assigned the return value from function pxav3_get_mmc_pdata(). static int sdhci_pxav3_probe(struct platform_device *pdev) { struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data; ... if (match) { ret = mmc_of_parse(host->mmc); if (ret) goto err_of_parse; sdhci_get_of_property(pdev); pdata = pxav3_get_mmc_pdata(dev); } ... } Signed-off-by:
Jingju Hou <houjingj@marvell.com> Fixes: b650352d("mmc: sdhci-pxa: Add device tree support") Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Joakim Tjernlund authored
commit 8e91125f upstream. Support for 8BIT bus with was added some time ago to sdhci-esdhc but then missed to remove the 8BIT from the reserved bit mask which made 8BIT non functional. Fixes: 66b50a00 ("mmc: esdhc: Add support for 8-bit bus width and..") Signed-off-by:
Joakim Tjernlund <joakim.tjernlund@transmode.se> Signed-off-by:
-
Peng Fan authored
commit 7ac02036 upstream. We should not call dma_free_coherent if host->adma_table is NULL, otherwise may trigger panic. Fixes: d1e49f77 ("mmc: sdhci: convert ADMA descriptors to a...") Signed-off-by:
Peng Fan <van.freenix@gmail.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Kishon Vijay Abraham I authored
commit 408806f7 upstream. DTO/DCRC errors were not being informed to the mmc core since commit ae4bf788 ("mmc: omap_hsmmc: consolidate error report handling of HSMMC IRQ"). This commit made sure 'end_trans' is never set on DTO/DCRC errors. This is because after this commit 'host->data' is checked after it has been cleared to NULL by omap_hsmmc_dma_cleanup(). Because 'end_trans' is never set, omap_hsmmc_xfer_done() is never invoked making core layer not to be aware of DTO/DCRC errors. Because of this any command invoked after DTO/DCRC error leads to a hang. Fix this by checking for 'host->data' before it is actually cleared. Fixes: ae4bf788 ("mmc: omap_hsmmc: consolidate error report handling of HSMMC IRQ") Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Vignesh R <vigneshr@ti.com> Tested-by:
Andreas Fenkart <afenkart@gmail.com> Signed-off-by:
-
Alex Williamson authored
commit 46ebb7af upstream. This continues the attempt to fix commit fb170fb4 ("iommu/vt-d: Introduce helper functions to make code symmetric for readability"). The previous attempt in commit 71684406 ("iommu/vt-d: Detach domain *only* from attached iommus") overlooked the fact that dmar_domain.iommu_bmp gets cleared for VM domains when devices are detached: intel_iommu_detach_device domain_remove_one_dev_info domain_detach_iommu The domain is detached from the iommu, but the iommu is still attached to the domain, for whatever reason. Thus when we get to domain_exit(), we can't rely on iommu_bmp for VM domains to find the active iommus, we must check them all. Without that, the corresponding bit in intel_iommu.domain_ids doesn't get cleared and repeated VM domain creation and destruction will run out of domain IDs. Meanwhile we still can't call iommu_detach_domain() on arbitrary non-VM domains or we risk clearing in-use domain IDs, as 71684406 attempted to address. It's tempting to modify iommu_detach_domain() to test the domain iommu_bmp, but the call ordering from domain_remove_one_dev_info() prevents it being able to work as fb170fb4 seems to have intended. Caching of unused VM domains on the iommu object seems to be the root of the problem, but this code is far too fragile for that kind of rework to be proposed for stable, so we simply revert this chunk to its state prior to fb170fb4. Fixes: fb170fb4 ("iommu/vt-d: Introduce helper functions to make code symmetric for readability") Fixes: 71684406 ("iommu/vt-d: Detach domain *only* from attached iommus") Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit e3eea140 upstream. Commit 4104d326 ("ftrace: Remove global function list and call function directly") simplified the ftrace code by removing the global_ops list with a new design. But this cleanup also broke the filtering of PIDs that are added to the set_ftrace_pid file. Add back the proper hooks to have pid filtering working once again. Reported-by:
Matt Fleming <matt@console-pimps.org> Reported-by:
Richard Weinberger <richard.weinberger@gmail.com> Tested-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Eric W. Biederman authored
commit fe78fcc8 upstream. The handling of in detach_mounts of unmounted but connected mounts is buggy and can lead to an infinite loop. Correct the handling of unmounted mounts in detach_mount. When the mountpoint of an unmounted but connected mount is connected to a dentry, and that dentry is deleted we need to disconnect that mount from the parent mount and the deleted dentry. Nothing changes for the unmounted and connected children. They can be safely ignored. Fixes: ce07d891 mnt: Honor MNT_LOCKED when detaching mounts Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
commit f2d0a123 upstream. rmdir mntpoint will result in an infinite loop when there is a mount locked on the mountpoint in another mount namespace. This is because the logic to test to see if a mount should be disconnected in umount_tree is buggy. Move the logic to decide if a mount should remain connected to it's mountpoint into it's own function disconnect_mount so that clarity of expression instead of terseness of expression becomes a virtue. When the conditions where it is invalid to leave a mount connected are first ruled out, the logic for deciding if a mount should be disconnected becomes much clearer and simpler. Fixes: e0c9c0af mnt: Update detach_mounts to leave mounts connected Fixes: ce07d891 mnt: Honor MNT_LOCKED when detaching mounts Signed-off-by:
-
Uwe Kleine-König authored
commit 9571b25d upstream. imx1_pinconf_set assumes that the array of pins in struct imx1_pinctrl_soc_info can be indexed by pin id to get the pinctrl_pin_desc for a pin. This used to be correct up to commit 607af165 which removed some entries from the array and so made it wrong to access the array by pin id. The result of this bug is a wrong pin name in the output for small pin ids and an oops for the bigger ones. This patch is the result of a discussion that includes patches by Markus Pargmann and Chris Ruehl. Fixes: 607af165 ("pinctrl: i.MX27: Remove nonexistent pad definitions") Reported-by:
Chris Ruehl <chris.ruehl@gtsys.com.hk> Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Markus Pargmann <mpa@pengutronix.de> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Tom Hughes authored
commit 4479004e upstream. If we don't do this, and we then fail to recreate the debugfs directory during a mode change, then we will fail later trying to add stations to this now bogus directory: BUG: unable to handle kernel NULL pointer dereference at 0000006c IP: [<c0a92202>] mutex_lock+0x12/0x30 Call Trace: [<c0678ab4>] start_creating+0x44/0xc0 [<c0679203>] debugfs_create_dir+0x13/0xf0 [<f8a938ae>] ieee80211_sta_debugfs_add+0x6e/0x490 [mac80211] Signed-off-by:
Tom Hughes <tom@compton.nu> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
