- 15 Dec, 2017 25 commits
-
-
Jiri Pirko authored
Since in qdisc_create, the destroy op is called when init fails, we don't do cleanup in init and leave it up to destroy. This fixes use-after-free when trying to put already freed block. Fixes: 6e40cf2d ("net: sched: use extended variants of block_get/put in ingress and clsact qdiscs") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Haishuang Yan authored
If pskb_may_pull return failed, return PACKET_REJECT instead of -ENOMEM. Fixes: 84e54fe0 ("gre: introduce native tunnel support for ERSPAN") Cc: William Tu <u9012063@gmail.com> Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniele Palmas authored
This patch adds support for Telit ME910 PID 0x1101. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Yuval Mintz says: ==================== net: sched: Make qdisc offload uapi uniform Several qdiscs can already be offloaded to hardware, but there's an inconsistecy in regard to the uapi through which they indicate such an offload is taking place - indication is passed to the user via TCA_OPTIONS where each qdisc retains private logic for setting it. The recent addition of offloading to RED in 602f3baf ("net_sch: red: Add offload ability to RED qdisc") caused the addition of yet another uapi field for this purpose - TC_RED_OFFLOADED. For clarity and prevention of bloat in the uapi we want to eliminate said added uapi, replacing it with a common mechanism that can be used to reflect offload status of the various qdiscs. The first patch introduces TCA_HW_OFFLOAD as the generic message meant for this purpose. The second changes the current RED implementation into setting the internal bits necessary for passing it, and the third removes TC_RED_OFFLOADED as its no longer needed. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
Following the previous patch, RED is now using the new uniform uapi for indicating it's offloaded. As a result, TC_RED_OFFLOADED is no longer utilized by kernel and can be removed [as it's still not part of any stable release]. Fixes: 602f3baf ("net_sch: red: Add offload ability to RED qdisc") Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
Let RED utilize the new internal flag, TCQ_F_OFFLOADED, to mark a given qdisc as offloaded instead of using a dedicated indication. Also, change internal logic into looking at said flag when possible. Fixes: 602f3baf ("net_sch: red: Add offload ability to RED qdisc") Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
Qdiscs can be offloaded to HW, but current implementation isn't uniform. Instead, qdiscs either pass information about offload status via their TCA_OPTIONS or omit it altogether. Introduce a new attribute - TCA_HW_OFFLOAD that would form a uniform uAPI for the offloading status of qdiscs. Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Igor Russkikh says: ==================== net: aquantia: Atlantic driver 12/2017 updates The patchset contains important hardware fix for machines with large MRRS and couple of improvement in stats and capabilities reporting patch v3: - Fixed patch #7 after Andrew's finding. NIC level stats actually have to be cleaned only on hw struct creation (and this is done in kzalloc). On each hwinit we only have to reset link state to make sure hw stats update will not increment nic stats during init. patch v2: - split into more detailed commits Comment from David on wrong defines case will be submitted separately later ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
Add a suffix to distinguish kernel mainline version and aquantia releases Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
On very first start we should read out current HW counter values to make diff based calculations later. This also should be done each time NIC gets down/up or wakes up after sleep state. We reset link state explicitly to prevent diffs from being summed this first time. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
Reduce timeout from 2 secs to 1 sec. If link is down, reduce it to 500msec. This speeds up link detection. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
This metric comes from HW and is also diff-calculated, like other counters Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
Originally they were filled from ring sw counters. These sometimes incorrectly calculate byte and packet amounts when using LRO/LSO and jumboframes. Filling ndev counters from hardware makes them precise. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
Device hardware provides only 32bit counters. Using these directly causes byte counters to overflow soon. A separate nic level structure with 64 bit counters is now used to collect incrementally all the stats and report these counters to ethtool stats and ndev stats. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
Systems with large MRRS on device (2K, 4K) with high data rates and/or large MTU, atlantic observes DMA packet buffer overflow. On some systems that causes PCIe transaction errors, hardware NMIs or datapath freeze. This patch 1) Limits MRRS from device side to 2K (thats maximum our hardware supports) 2) Limit maximum size of outstanding TX DMA data read requests. This makes hardware buffers running fine. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
Different hardware device Ids correspond to different maximum speed available. Extra checks were added for devices D108 and D109 to remove unsupported speeds from these device capabilities list. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Willem de Bruijn authored
skb_complete_tx_timestamp must ingest the skb it is passed. Call kfree_skb if the skb cannot be enqueued. Fixes: b245be1f ("net-timestamp: no-payload only sysctl") Fixes: 9ac25fc0 ("net: fix socket refcounting in skb_complete_tx_timestamp()") Reported-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/qeth: fixes 2017-12-13 some more patches for 4.15, that fix multiple issues with IP Takeover configuration in qeth. Please queue them up for stable kernels as well (4.9 and newer). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
Any modification to the takeover IP-ranges requires that we re-evaluate which IP addresses are takeover-eligible. Otherwise we might do takeover for some addresses when we no longer should, or vice-versa. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
Modifying the flags of an IP addr object needs to be protected against eg. concurrent removal of the same object from the IP table. Fixes: 5f78e29c ("qeth: optimize IP handling in rx_mode callback") Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
When takeover is switched off, current code clears the 'TAKEOVER' flag on all IPs. But the flag is also used for RXIP addresses, and those should not be affected by the takeover mode. Fix the behaviour by consistenly applying takover logic to NORMAL addresses only. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
Just as for an explicit enable/disable, toggling the takeover mode also requires that the IP addresses get updated. Otherwise all IPs that were added to the table before the mode-toggle, get registered with the old settings. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Simon Wunderlich says: ==================== Here are some batman-adv bugfixes: - Initialize the fragment headers, by Sven Eckelmann - Fix a NULL check in BATMAN V, by Sven Eckelmann - Fix kernel doc for the time_setup() change, by Sven Eckelmann - Use the right lock in BATMAN IV OGM Update, by Sven Eckelmann ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
Learning is currently enabled for ports which are OVS slaves - even though OVS doesn't need this indication. Since we're not associating a fid with the port, HW would continuously notify driver of learned [& aged] MACs which would be logged as errors. Fixes: 2b94e58d ("mlxsw: spectrum: Allow ports to work under OVS master") Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 13 Dec, 2017 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2017-12-13 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Addition of explicit scheduling points to map alloc/free in order to avoid having to hold the CPU for too long, from Eric. 2) Fixing of a corruption in overlapping perf_event_output calls from different BPF prog types on the same CPU out of different contexts, from Daniel. 3) Fallout fixes for recent correction of broken uapi for BPF_PROG_TYPE_PERF_EVENT. um had a missing asm header that needed to be pulled in from asm-generic and for BPF selftests the asm-generic include did not work, so similar asm include scheme was adapted for that problematic header that perf is having with other header files under tools, from Daniel. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Tariq Toukan says: ==================== mlx4 misc fixes This patchset contains misc bug fixes from the team to the mlx4 Core and Eth drivers. Patch 1 by Eugenia fixes an MTU issue in selftest. Patch 2 by Eran fixes an accounting issue in the resource tracker. Patch 3 by Eran fixes a race condition that causes counter inconsistency. Series generated against net commit: 20080971 fou: fix some member types in guehdr v2: Patch 2: Add reviewer credit, rephrase commit message. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eran Ben Elisha authored
Before this patch, the stats_lock was acquired twice. In between the locks Driver sent command to gather some more statistics (per priority and counter statistics). If the stats lock was acquired by get statistics NDO in between we would have report out of sync counters. Fix this by collecting all stats from Firmware in advance and then fill the Software structs under one lock. Fixes: 0b131561 ("net/mlx4_en: Add Flow control statistics display via ethtool") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eran Ben Elisha authored
The field res_free indicates the total number of counters which are available for allocation (reserved and unreserved). Fixed a bug where the reserved counters were subtracted from res_free before any allocation was performed. Before this fix, free counters which were not reserved could not be allocated. Fixes: 9de92c60 ("net/mlx4_core: Adjust counter grant policy in the resource tracker") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eugenia Emantayev authored
Set the minimal MTU threshold for running loopback selftest. MTU should be big enough to include packet payload, NET_IP_ALIGN, Ethernet headers and preamble length. Fixes: e7c1c2c4 ("mlx4_en: Added self diagnostics test implementation") Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
When in SGMII-to-Copper mode, the fiber page is used for the MAC facing link, and does not require configuration of the fiber auto-negotiation settings. Avoid trying. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jie Deng authored
Jose Abreu will join to maintain dwc-xlgmac. He will help with new feature development for this driver. Thanks Jose and welcome on board! Signed-off-by: Jie Deng <jiedeng@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Only the retransmit timer currently refreshes tcp_mstamp We should do the same for delayed acks and keepalives. Even if RFC 7323 does not request it, this is consistent to what linux did in the past, when TS values were based on jiffies. Fixes: 385e2070 ("tcp: use tp->tcp_mstamp in output path") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Mike Maloney <maloney@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Mike Maloney <maloney@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Wang authored
When ms timestamp is used, current logic uses 1us in tcp_rcv_rtt_update() when the real rcv_rtt is within 1 - 999us. This could cause rcv_rtt underestimation. Fix it by always using a min value of 1ms if ms timestamp is used. Fixes: 645f4c6f ("tcp: switch rcv_rtt_est and rcvq_space to high resolution timestamps") Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
The code to handle multi-port SKGE boards was freeing IRQ twice. The first one was under lock and might sleep. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
The function meson_gxl_read_status is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: symbol 'meson_gxl_read_status' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Ensure that all mdio devices populate the struct device fwnode pointer as well as the of_node pointer to allow drivers that wish to use fwnode APIs to work. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
When a PHY has the BMCR_PDOWN bit set, it may decide to ignore writes to other registers, or reset the registers to power-on defaults. Micrel PHYs do this for their interrupt registers. The current structure of phylib tries to enable interrupts before resuming (and releasing) the BMCR_PDOWN bit. This fails, causing Micrel PHYs to stop working after a suspend/resume sequence if they are using interrupts. Fix this by ensuring that the PHY driver resume methods do not take the phydev->lock mutex themselves, but the callers of phy_resume() take that lock. This then allows us to move the call to phy_resume() before we enable interrupts in phy_start(). Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Use XAUI rather than XGMII for DSA link ports, as this is the interface mode that the switches actually use. XAUI is the 4 lane bus with clock per direction, whereas XGMII is a 32 bit bus with clock. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
XGMII is a 32-bit bus plus two clock signals per direction. XAUI is four serial lanes per direction. The 88e6190 supports XAUI but not XGMII as it doesn't have enough pins. The same is true of 88e6176. Match on PHY_INTERFACE_MODE_XAUI for the XAUI port type, but keep accepting XGMII for backwards compatibility. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-