Make sure we are not disturbed by spurious interrupts, as we poll the
halt bit anyway.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Split the reset function into more meaningful and reusable ones.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Add a flag that can be set when declaring how a LS firmware should be
loaded. This allows us to remove falcon-specific code in the loader.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Split the act of building the ACR blob from firmware files from the rest
of the (chip-dependent) secure boot logic. ACR logic is moved into
acr_rxxx.c files, where rxxx corresponds to the compatible release of
the NVIDIA driver. At the moment r352 and r361 are supported since
firmwares have been released for these versions. Some abstractions are
added on top of r352 so r361 can easily be implemented on top of it by
just overriding a few hooks.

This split makes it possible and easy to reuse the same ACR version on
different chips. It also hopefully makes the code much more readable as
the different secure boot logics are separated. As more chips and
firmware versions will be supported, this is a necessity to not get lost
in code that is already quite complex.

This is a big commit, but it essentially moves things around (and split
the nvkm_secboot structure into two, nvkm_secboot and nvkm_acr). Code
semantics should not be affected.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Use the HS hook to completely generate the HS BL descriptor, similarly
to what is done in the LS hook, instead of (arbitrarily) using the
acr_v1 format as an intermediate.

This allows us to make the bootloader descriptor structures private to
each implementation, resulting in a cleaner an more consistent design.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Secure firmwares provided by NVIDIA will follow the same overall
principle, but may slightly differ in format, or not use the same
bootloader descriptor even on the same chip. In order to handle
this as gracefully as possible, turn the LS firmware functions into
hooks that can be overloaded as needed.

The current hooks cover the external firmware loading as well as the
bootloader descriptor generation.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This hook can be removed if the function writing the HS
descriptor is aware of WPR settings. Let's do that as it allows us to
make the ACR descriptor structure private and save some code.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

The init() hook is called by the subdev's oneinit(). Rename it
accordingly to avoid confusion about the lifetime of objects allocated
in it.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Since GR has moved to using the falcon library to start the falcons,
this function is not needed anymore.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Create instances for the FECS and GPCCS falcons and use the init() and
fini() hooks to reserve them for as long as GR controls them.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

gf100_gr_init_ctxctl() is basically two different functions (one for
use of internal firmware, the other for use of external firmware), but
its current layout makes it look more complex than it is. Split it to
better reflect that fact.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Add a fini() hook to the GR engine. This will be used by gf100+ to
properly release the FECS and GPCCS falcons.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Use the falcon library functions in secure boot. This removes a lot of
code and makes the secure boot flow easier to understand as no register
is directly accessed.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

These functions should use the nvkm_secboot_falcon enum. Fix this.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Add a dummy PMU device so the PMU falcon is instanciated and can be used
by secure boot.

We could reuse gk20a's implementation here, but it would fight with
secboot over PMU falcon's ownership and secboot will reset the PMU,
preventing it from operating afterwards. Proper handout between secboot
and pmu is coming along with the actual gm20b PMU implementation, so
use this as a temporary solution.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Use the falcon library functions where relevant.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Some functions always succeed - change their return type to void and
remove the error-handling code in their caller.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Use the PMU constructor so that all base members (in particular the
falcon instance) are initialized properly.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Have an instance of nvkm_falcon in the PMU structure, ready to be used
by other subdevs (i.e. secboot).
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Add a PMU constructor so implementations that extend the nvkm_pmu
structure can have all base members properly initialized.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Falcon processors are used in various places of GPU chips. Although there
exist different versions of the falcon, and some variants exist, the
base set of actions performed on them is the same, which results in lots
of duplicated code.

This patch consolidates the current nvkm_falcon structure and extends it
with the following features:

* Ability for an engine to obtain and later release a given falcon,
* Abstractions for basic operations (IMEM/DMEM access, start, etc)
* Abstractions for secure operations if a falcon is secure

Abstractions make it easy to e.g. start a falcon, without having to care
about its details. For instance, falcons in secure mode need to be
started by writing to a different register.

Right now the abstractions variants only cover secure vs. non-secure
falcon, but more will come as e.g. SEC2 support is added.

This is still a WIP as other functions previously done by
engine/falcon.c need to be reimplemented. However this first step allows
to keep things simple and to discuss basic design.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Add a function that allows us to query whether a given subdev is
currently enabled or not.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Constify the local variables declared in these macros so we can pass
const pointers to them.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This reverts commit 1592364d.

This apparantly causes some regressions so pull it out for now.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'omapdrm-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next

omapdrm fixes for v4.11

Fix regressions:
- Planes might have been left enabled
- Scaling checks did not use the new config

Also limit downscaling decimation to prevent HW underflows.

* tag 'omapdrm-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  drm/omapdrm: dispc: Refuse x-decimation above 4 for all but 8-bit formats
  drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  Revert "drm: omapdrm: Let the DRM core skip plane commit on inactive CRTCs"

Fixes for 4.11. Highlights:
- fix >2 displays on asics with 3 or 5 crtcs
- fix SI headless asics
- powerplay fixes for new polaris variants
- misc fixes

* 'drm-next-4.11' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu: fix warning on older gcc releases
  drm/ttm: make TTM_MAX_BO_PRIORITY unsigned
  drm/amd/amdgpu: Fix flow control in uvd_v4_2_stop()
  drm/amd/powerplay: add didt config table for polaris kicker
  drm/amd/powerplay: modify VddcPhase value for polaris kicker
  drm/amd/powerplay: add kicker flag into smumgr
  drm/amdgpu: Initialize pipe priority order on graphic initialization
  drm/amdgpu: read hw register to check pg status.
  drm/amdgpu: Add to initialization of mmVCE_VCPU_CNTL register
  drm/amdgpu/pm: check for headless before calling compute_clocks
  drm/amdgpu: use amdgpu_gem_va_check() in amdgpu_gem_va_update_vm()
  drm/amdgpu: add more cases to DCE11 possible crtc mask setup

gcc-4.8 warns about '{0}' being used an an initializer for nested structures:

drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c: In function ‘gfx_v8_0_ring_emit_ce_meta_init’:
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c:7263:2: warning: missing braces around initializer [-Wmissing-braces]
  } ce_payload = {0};
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c: In function ‘gfx_v8_0_ring_emit_de_meta_init’:
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c:7290:2: warning: missing braces around initializer [-Wmissing-braces]
  } de_payload = {0};

Using an empty {} initializer however has the same effect and works on all versions.

Fixes: acad2b2a ("drm/amdgpu:implement CE/DE meta-init routines")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix a warning about different types in min() macro in amdgpu:

In file included from ./include/linux/list.h:8:0,
                 from drivers/gpu/drm/amd/amdgpu/amdgpu_object.c:32:
drivers/gpu/drm/amd/amdgpu/amdgpu_object.c: In function ‘amdgpu_bo_create_restricted’:
./include/linux/kernel.h:739:16: warning: comparison of distinct pointer types lacks a cast
  (void) (&min1 == &min2);   \
                ^
./include/linux/kernel.h:742:2: note: in expansion of macro ‘__min’
  __min(typeof(x), typeof(y),   \
  ^~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_object.c:434:21: note: in expansion of macro ‘min’
  bo->tbo.priority = min(bo->tbo.priority, TTM_MAX_BO_PRIORITY - 1);
                     ^~~
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Break out of outer loop properly.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Let's disable all scaling that requires horizontal decimation with
higher factor than 4, until we have better estimates of what we can
and can not do. However, NV12 color format appears to work Ok with
all decimation factors.

When decimating horizontally by more that 4 the dss is not able to
fetch the data in burst mode. When this happens it is hard to tell if
there enough bandwidth. Despite what theory says this appears to be
true also for 16-bit color formats.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Move drm_atomic_helper_commit_modeset_enables() call to before
drm_atomic_helper_commit_planes() call and have a
omap_atomic_wait_for_completion() call after both.

With the current dss dispc implementation we have to enable the new
modeset before we can commit planes. The dispc ovl configuration
relies on the video mode configuration been written into the HW when
the ovl configuration is calculated.

This approach is not ideal because after a mode change the plane
update is executed only after the first vblank interrupt. The dispc
implementation should be fixed so that it is able use uncommitted drm
state information.  information.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

This reverts commit dadf4659.

If planes are not disabled when the they are not on any crtc anymore
they will remain active and may show as "ghosts" when the crtc they
were last on is active again.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Merge branch 'drm-rockchip-next-2017-02-16' of https://github.com/markyzq/kernel-drm-rockchip into drm-next

Use iommu for rockchip arm64 platform.

* 'drm-rockchip-next-2017-02-16' of https://github.com/markyzq/kernel-drm-rockchip:
  drm/rockchip: Use common IOMMU API to attach devices
  drm/rockchip: Do not use DMA mapping API if attached to IOMMU domain

Merge tag 'drm-misc-next-fixes-2017-02-15' of git://anongit.freedesktop.org/git/drm-misc into drm-next

Fixes for the v4.11 merge window.

* tag 'drm-misc-next-fixes-2017-02-15' of git://anongit.freedesktop.org/git/drm-misc:
  drm: Resurrect atomic rmfb code, v3
  uapi: add missing install of dma-buf.h

- remove deprecated stih416 chip functionnalities
- fix issues met around gdp panes
- fix STI driver unbind procedure
- DVI/HDMI mode is automatically detected
- allow fps statisitics resetting

* tag 'sti-drm-next-2017-02-10' of https://github.com/vinceab/linux:
  drm/sti: debug fps reset
  drm/sti: hdmi: automatically check DVI/HDMI mode
  drm/sti: unbind all components while driver cleanup
  drm/sti: do not post GDP command if no update
  drm/sti: do not set gdp pixel clock rate if mode is not set
  drm/sti: enable gdp pixel clock in atomic_update
  drm/sti: remove deprecated legacy vtg slave
  drm/sti: remove deprecated sink_term config
  drm/sti: do not check hw scaling if mode is not set
  drm/sti: Fix up crtc_state->event handling
  drm/sti: use atomic_helper for commit

This was somehow lost between v3 and the merged version in Maarten's
patch merged as:

commit f2d580b9
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date:   Wed May 4 14:38:26 2016 +0200

    drm/core: Do not preserve framebuffer on rmfb, v4.

This introduces a slight behavioral change to rmfb. Instead of
disabling a crtc when the primary plane is disabled, we try to
preserve it.

Apart from old versions of the vmwgfx xorg driver, there is
nothing depending on rmfb disabling a crtc. Since vmwgfx is
a legacy driver we can safely only disable the plane with atomic.

If this commit is rejected by the driver then we will still fall
back to the old behavior and turn off the crtc.

v2:
- Remove plane->fb assignment, done by drm_atomic_clean_old_fb.
- Add WARN_ON when atomic_remove_fb fails.
- Always call drm_atomic_state_put.
v3:
- Use drm_drv_uses_atomic_modeset
- Handle the case where the first plane-disable-only commit fails
  with -EINVAL. Some drivers do not support this, fall back to
  disabling all crtc's in this case.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/66fc3da5-697b-1613-0a67-a5293209f0dc@linux.intel.com

Rockchip DRM used the arm special API, arm_iommu_*(), to attach
iommu for ARM32 SoCs. This patch convert to common iommu API
so it would support ARM64 like RK3399.

Since previous patch added support for direct IOMMU address space
management, there is no need to use DMA API anymore and this patch wires
things to use the new method.
Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>