- 28 Dec, 2017 10 commits
-
-
Tariq Toukan authored
Do not check IPv6 bit in cqe status if CONFIG_IPV6 is not enabled. Function check_csum() is reached only with IPv4 or IPv6 set (if enabled), if IPv6 is not set (or is not enabled) it is redundant to test the IPv4 bit. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
If the qdisc is not found here, it is going to be created. Therefore, this is not an error path. Remove the extack message set and don't confuse user with error message in case the qdisc was created successfully. Fixes: 09215598 ("net: sched: sch_api: handle generic qdisc errors") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Kunihiko Hayashi says: ==================== net: add UniPhier AVE ethernet support This series adds support for Socionext AVE ethernet controller implemented on UniPhier SoCs. This driver supports RGMII/RMII modes. v8: https://www.spinics.net/lists/netdev/msg474374.html The PHY patch included in v1 has already separated in: http://www.spinics.net/lists/netdev/msg454595.html Changes since v8: - move operators at the beginning of the line to the end of the previous line - dt-bindings: add blank lines before mdio and phy subnodes Changes since v7: - dt-bindings: fix mdio subnode description Changes since v6: - sort the order of local variables from longest to shortest line - fix ave_probe() which calls register_netdev() at the end of initialization - dt-bindings: remove phy node descriptions in mdio node Changes since v5: - replace license boilerplate with SPDX Identifier - remove inline directives and an unused function Changes since v4: - fix larger integer warning on AVE_PFMBYTE_MASK0 Changes since v3: - remove checking dma address and use dma_set_mask() to restirct address - replace ave_mdio_busywait() with read_poll_timeout() - replace functions to access to registers with readl/writel() directly - replace a function to access to macaddr with ave_hw_write_macaddr() - change return value of ave_dma_map() to error value - move mdiobus_unregister() from ave_remove() to ave_uninit() - eliminate else block at the end of ave_dma_map() - add mask definitions for packet filter - sort bitmap definitions in descending order - add error check to some functions - rename and sort functions to clear sub-categories - fix error value consistency - remove unneeded initializers - change type of constant arrays Changes since v2: - replace clk_get() with devm_clk_get() - replace reset_control_get() with devm_reset_control_get_optional_shared() - add error return when the error occurs on the above *_get functions - sort soc data and compatible strings - remove clearly obvious comments - modify dt-bindings document consistent with these modifications Changes since v1: - add/remove devicetree properties and sub-node - remove "internal-phy-interrupt" and "desc-bits" property - add SoC data structures based on compatible strings - add node operation to apply "mdio" sub-node - add support for features - add support for {get,set}_pauseparam and pause frame operations - add support for ndo_get_stats64 instead of ndo_get_stats - replace with desiable functions - replace check for valid phy_mode with phy_interface{_mode}_is_rgmii() - replace phy attach message with phy_attached_info() - replace 32bit operation with {upper,lower}_32_bits() on ave_wdesc_addr() - replace nway_reset and get_link with generic functions - move operations to proper functions - move phy_start_aneg() to ndo_open, and remove unnecessary PHY interrupt operations See http://www.spinics.net/lists/netdev/msg454590.html - move irq initialization and descriptor memory allocation to ndo_open - move initialization of reset and clock and mdiobus to ndo_init - fix skbuffer operations - fix skb alignment operations and add Rx buffer adjustment for descriptor See http://www.spinics.net/lists/netdev/msg456014.html - add error returns when dma_map_single() failed - clean up code structures - clean up wait-loop and wake-queue conditions - add ave_wdesc_addr() and offset definitions - add ave_macaddr_init() to clean up mac-address operation - fix checking whether Tx entry is not enough - fix supported features of phydev - add necessary free/disable operations - add phydev check on ave_{get,set}_wol() - remove netif_carrier functions, phydev initializer, and Tx budget check - change obsolate codes - replace ndev->{base_addr,irq} with the members of ave_private - rename goto labels and mask definitions, and remove unused codes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kunihiko Hayashi authored
The UniPhier platform from Socionext provides the AVE ethernet controller that includes MAC and MDIO bus supporting RGMII/RMII modes. The controller is named AVE. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kunihiko Hayashi authored
DT bindings for the AVE ethernet controller found on Socionext's UniPhier platforms. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ganesh Goudar authored
Add support for new Backplane XLAUI port type. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ganesh Goudar authored
Fix incorrect VNI display in mps_tcam Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
kbuild test robot authored
Fixes: 482d2e9c ("net: hns3: add support to query tqps number") Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2017-12-28 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Fix incorrect state pruning related to recognition of zero initialized stack slots, where stacksafe exploration would mistakenly return a positive pruning verdict too early ignoring other slots, from Gianluca. 2) Various BPF to BPF calls related follow-up fixes. Fix an off-by-one in maximum call depth check, and rework maximum stack depth tracking logic to fix a bypass of the total stack size check reported by Jann. Also fix a bug in arm64 JIT where prog->jited_len was uninitialized. Addition of various test cases to BPF selftests, from Alexei. 3) Addition of a BPF selftest to test_verifier that is related to BPF to BPF calls which demonstrates a late caller stack size increase and thus out of bounds access. Fixed above in 2). Test case from Jann. 4) Addition of correlating BPF helper calls, BPF to BPF calls as well as BPF maps to bpftool xlated dump in order to allow for better BPF program introspection and debugging, from Daniel. 5) Fixing several bugs in BPF to BPF calls kallsyms handling in order to get it actually to work for subprogs, from Daniel. 6) Extending sparc64 JIT support for BPF to BPF calls and fix a couple of build errors for libbpf on sparc64, from David. 7) Allow narrower context access for BPF dev cgroup typed programs in order to adapt to LLVM code generation. Also adjust memlock rlimit in the test_dev_cgroup BPF selftest, from Yonghong. 8) Add netdevsim Kconfig entry to BPF selftests since test_offload.py relies on netdevsim device being available, from Jakub. 9) Reduce scope of xdp_do_generic_redirect_map() to being static, from Xiongwei. 10) Minor cleanups and spelling fixes in BPF verifier, from Colin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
After TC offloads were converted to callbacks we have no choice but keep track of the offloaded filter in the driver. Since this change came a little late in the release cycle there were a number of conflicts and allocation of vNIC priv structure seems to have slipped away in linux-next. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 27 Dec, 2017 30 commits
-
-
Yafang Shao authored
There's a space character missed in the printk messages. Put the message into one line could simplify searching for the messages in the kernel source. Fixes: 563e0bb0("net: tracepoint: replace tcp_set_state tracepoint with inet_sock_set_state tracepoint") Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Willem de Bruijn says: ==================== zerocopy refinements 1/4 is a small optimization follow-up to the earlier fix to skb_segment: check skb state once per skb, instead of once per frag. 2/4 makes behavior more consistent between standard and zerocopy send: set the PSH bit when hitting MAX_SKB_FRAGS. This helps GRO. 3/4 resolves a surprising inconsistency in notification: because small packets were not stored in frags, they would not set the copied error code over loopback. This change also optimizes the path by removing copying and making tso_fragment cheaper. 4/4 follows-up to 3/4 by no longer allocated now unused memory. this was actually already in RFC patches, but dropped as I pared down the patch set during revisions. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Willem de Bruijn authored
Zerocopy payload is now always stored in frags, and space for headers is reversed, so this memory is unused. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Willem de Bruijn authored
This avoids an unnecessary copy of 1-2KB and improves tso_fragment, which has to fall back to tcp_fragment if skb->len != skb_data_len. It also avoids a surprising inconsistency in notifications: Zerocopy packets sent over loopback have their frags copied, so set SO_EE_CODE_ZEROCOPY_COPIED in the notification. But this currently does not happen for small packets, because when all data fits in the linear fragment, data is not copied in skb_orphan_frags_rx. Reported-by: Tom Deseyn <tom.deseyn@gmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Willem de Bruijn authored
Skbs that reach MAX_SKB_FRAGS cannot be extended further. Do the same for zerocopy frags as non-zerocopy frags and set the PSH bit. This improves GRO assembly. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Willem de Bruijn authored
This is a net-next follow-up to commit 268b7906 ("skbuff: orphan frags before zerocopy clone"), which fixed a bug in net, but added a call to skb_zerocopy_clone at each frag to do so. When segmenting skbs with user frags, either the user frags must be replaced with private copies and uarg released, or the uarg must have its refcount increased for each new skb. skb_orphan_frags does the first, except for cases that can handle reference counting. skb_zerocopy_clone then does the second. Call these once per nskb, instead of once per frag. That is, in the common case. With a frag list, also refresh when the origin skb (frag_skb) changes. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Sowmini Varadhan says: ==================== rds bug fixes Ran into pre-existing bugs when working on the fix for https://www.spinics.net/lists/netdev/msg472849.html The bugs fixed in this patchset are unrelated to the syzbot failure (which I'm still testing and trying to reproduce) but meanwhile, let's get these fixes out of the way. V2: target net-next (rds:tcp patches have a dependancy on changes that are in net-next, but not yet in net) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sowmini Varadhan authored
If kmem_cache_alloc() fails in the middle of the for() loop, cleanup anything that might have been allocated so far. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sowmini Varadhan authored
Commit f10b4cff ("rds: tcp: atomically purge entries from rds_tcp_conn_list during netns delete") adds the field t_tcp_detached, but this needs to be initialized explicitly to false. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sowmini Varadhan authored
If the rds_sock is not added to the bind_hash_table, we must reset rs_bound_addr so that rds_remove_bound will not trip on this rds_sock. rds_add_bound() does a rds_sock_put() in this failure path, so failing to reset rs_bound_addr will result in a socket refcount bug, and will trigger a WARN_ON with the stack shown below when the application subsequently tries to close the PF_RDS socket. WARNING: CPU: 20 PID: 19499 at net/rds/af_rds.c:496 \ rds_sock_destruct+0x15/0x30 [rds] : __sk_destruct+0x21/0x190 rds_remove_bound.part.13+0xb6/0x140 [rds] rds_release+0x71/0x120 [rds] sock_release+0x1a/0x70 sock_close+0xe/0x20 __fput+0xd5/0x210 task_work_run+0x82/0xa0 do_exit+0x2ce/0xb30 ? syscall_trace_enter+0x1cc/0x2b0 do_group_exit+0x39/0xa0 SyS_exit_group+0x10/0x10 do_syscall_64+0x61/0x1a0 Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sudip Mukherjee authored
The build of mips bcm47xx_defconfig is failing with the error: net/sched/sch_fq_codel.c: In function 'fq_codel_init': net/sched/sch_fq_codel.c:487:8: error: too many arguments to function 'tcf_block_get' While adding the extack support, the commit missed adding it in the headers when CONFIG_NET_CLS is not defined. Fixes: 8d1a77f9 ("net: sch: api: add extack support in tcf_block_get") Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Alexei Starovoitov says: ==================== Jann reported an issue with stack depth tracking. Fix it and add tests. Also fix off-by-one error in MAX_CALL_FRAMES check. This set is on top of Jann's "selftest for late caller stack size increase" test. ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Alexei Starovoitov authored
fix off by one error in max call depth check and add a test Fixes: f4d7e40a ("bpf: introduce function calls (verification)") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Alexei Starovoitov authored
to test inner logic of stack depth tracking Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Alexei Starovoitov authored
Instead of computing max stack depth for current call chain during the main verifier pass track stack depth of each function independently and after do_check() is done do another pass over all instructions analyzing depth of all possible call stacks. Fixes: f4d7e40a ("bpf: introduce function calls (verification)") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Jann Horn authored
This checks that it is not possible to bypass the total stack size check in update_stack_depth() by calling a function that uses a large amount of stack memory *before* using a large amount of stack memory in the caller. Currently, the first added testcase causes a rejection as expected, but the second testcase is (AFAICS incorrectly) accepted: [...] #483/p calls: stack overflow using two frames (post-call access) FAIL Unexpected success to load! 0: (85) call pc+2 caller: R10=fp0,call_-1 callee: frame1: R1=ctx(id=0,off=0,imm=0) R10=fp0,call_0 3: (72) *(u8 *)(r10 -300) = 0 4: (b7) r0 = 0 5: (95) exit returning from callee: frame1: R0_w=inv0 R1=ctx(id=0,off=0,imm=0) R10=fp0,call_0 to caller at 1: R0_w=inv0 R10=fp0,call_-1 from 5 to 1: R0=inv0 R10=fp0,call_-1 1: (72) *(u8 *)(r10 -300) = 0 2: (95) exit processed 6 insns, stack depth 300+300 [...] Summary: 704 PASSED, 1 FAILED AFAICS the JIT-generated code for the second testcase shows that this really causes the stack pointer to be decremented by 300+300: first function: 00000000 55 push rbp 00000001 4889E5 mov rbp,rsp 00000004 4881EC58010000 sub rsp,0x158 0000000B 4883ED28 sub rbp,byte +0x28 [...] 00000025 E89AB3AFE5 call 0xffffffffe5afb3c4 0000002A C685D4FEFFFF00 mov byte [rbp-0x12c],0x0 [...] 00000041 4883C528 add rbp,byte +0x28 00000045 C9 leave 00000046 C3 ret second function: 00000000 55 push rbp 00000001 4889E5 mov rbp,rsp 00000004 4881EC58010000 sub rsp,0x158 0000000B 4883ED28 sub rbp,byte +0x28 [...] 00000025 C685D4FEFFFF00 mov byte [rbp-0x12c],0x0 [...] 0000003E 4883C528 add rbp,byte +0x28 00000042 C9 leave 00000043 C3 ret Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
David S. Miller authored
Lorenzo Bianconi says: ==================== l2tp: fix offset/peer_offset conf parameters This patchset add peer_offset configuration parameter in order to specify two different values for payload offset on tx/rx side. Moreover fix missing print session offset info ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Lorenzo Bianconi authored
Introduce peer_offset parameter in order to add the capability to specify two different values for payload offset on tx/rx side. If just offset is provided by userspace use it for rx side as well in order to maintain compatibility with older l2tp versions Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hangbin Liu authored
Report offset parameter in L2TP_CMD_SESSION_GET command if it has been configured by userspace Fixes: 309795f4 ("l2tp: Add netlink control API for L2TP") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-nextDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2017-12-22 1) Separate ESP handling from segmentation for GRO packets. This unifies the IPsec GSO and non GSO codepath. 2) Add asynchronous callbacks for xfrm on layer 2. This adds the necessary infrastructure to core networking. 3) Allow to use the layer2 IPsec GSO codepath for software crypto, all infrastructure is there now. 4) Also allow IPsec GSO with software crypto for local sockets. 5) Don't require synchronous crypto fallback on IPsec offloading, it is not needed anymore. 6) Check for xdo_dev_state_free and only call it if implemented. From Shannon Nelson. 7) Check for the required add and delete functions when a driver registers xdo_dev_ops. From Shannon Nelson. 8) Define xfrmdev_ops only with offload config. From Shannon Nelson. 9) Update the xfrm stats documentation. From Shannon Nelson. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Richard Leitner authored
As suggested by Rob Herring [1] rename the previously introduced reset-{,post-}delay-us bindings to the clearer reset-{,de}assert-us [1] https://patchwork.kernel.org/patch/10104905/Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Peng Li says: ==================== add some features and fix some bugs for HNS3 driver This patchset adds some new feature support and fixes some bugs: [Patch 1/17 - 5/17] add the support to modify/query the tqp number through ethtool -L/l command, and also fix some related bugs for change tqp number. [Patch 6/17 - 9-17] add support vlan tag offload on tx&&rx direction for pf, and fix some related bugs. [patch 10/17 - 11/17] fix bugs for auto negotiation. [patch 12/17] adds support for ethtool command set_pauseparam. [patch 13/17 - 14/17] add support to update flow control settings after autoneg. [patch 15/17 - 17/17] fix some other bugs in net-next. --- Change Log: V4 -> V5: 1. change the name spelling of Peng Li. V3 -> V4: 1. change the name spelling of Mingguang Qu and Jian Shen. V2 -> V3: 1. order local variables requested by David Miller. 2. use "int" for index iteration loops requested by David Miller. V1 -> V2: 1. fix the comments from Sergei Shtylyov. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peng Li authored
TC-based sched mode supports SRIOV enabled and SRIOV disabled. This patch change the TM sched mode to TC-based mode in initialization process. Fixes: cc9bb43a ("net: hns3: Add tc-based TM support for sriov enabled port") Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peng Li authored
Burstiness of a flow is determined by the depth of a bucket, When the upper rate of shaper is large, the current depth of a bucket is not enough. The default upper rate of shaper is 100G, so increase the depth of a bucket according to UM. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peng Li authored
This patch adds support for querying advertised pause frame by using ethtool command(ethtool ethx). Fixes: 496d03e9 ("net: hns3: Add Ethtool support to HNS3 driver") Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fuyun Liang authored
commit c4fb2cdf575d ("net: hns3: fix a bug for phy supported feature initialization") adds default supported features for phy, but our hardware also supports Asym Pause. This patch adds Asym Pause support to phy default features to prevent Asym Pause can not be advertised when the phy negotiates flow control. Fixes: c4fb2cdf575d ("net: hns3: fix a bug for phy supported feature initialization") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peng Li authored
When auto-negotiation is enabled, the MAC flow control settings is based on the flow control negotiation result. And it should be configured after a valid link has been established. This patch adds support to update flow control settings after auto-negotiation has completed. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peng Li authored
This patch adds set_pauseparam support for ethtool cmd. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fuyun Liang authored
When phy exists, we use the value of phydev.autoneg to represent the auto-negotiation state of hardware. Otherwise, we use the value of mac.autoneg to represent it. This patch fixes for getting a error value of auto-negotiation state in hclge_get_autoneg(). Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fuyun Liang authored
When checking whether auto-negotiation is on, driver only needs to check the value of mac.autoneg(SW) directly, and does not need to query it from hardware. Because this value is always synchronized with the auto-negotiation state of hardware. This patch removes the mac auto-negotiation state query. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-