BPF_LDX_MEM is used to load the least significant byte of the retrieved
test_val.index, however, on big-endian machines it ends up retrieving
the most significant byte.

Change the test to load the whole int in order to make it
endianness-independent.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

test_verifier tests can specify single- and multi-runs tests. Internally
logic of handling them is duplicated. Get rid of it by making single run
retval/data specification to be a first run spec.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Cc: Krzesimir Nowak <krzesimir@kinvolk.io>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Stanislav Fomichev says:

====================
When fixing selftests by adding support for wide stores, Yonghong
reported that he had seen some examples where clang generates
single u64 loads for two adjacent u32s as well:

http://lore.kernel.org/netdev/a66c937f-94c0-eaf8-5b37-8587d66c0c62@fb.com

Fix this to support aligned u64 reads for some bpf_sock_addr fields
as well.
====================
Acked-by: Andrii Narkyiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Update bpf_sock_addr comments to indicate support for 8-byte reads
from user_ip6 and msg_src_ip6.

Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Mirror existing wide store tests with wide loads. The only significant
difference is expected error string.

Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Move the file and rename internal BPF_SOCK_ADDR define to
BPF_SOCK_ADDR_STORE. This selftest will be extended in the next commit
with the wide loads.

Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add explicit check for u64 loads of user_ip6 and msg_src_ip6 and
update the comment.

Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Rename bpf_ctx_wide_store_ok to bpf_ctx_wide_access_ok to indicate
that it can be used for both loads and stores.

Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

While $ARCH can be relatively flexible (see Makefile and
tools/scripts/Makefile.arch), $SRCARCH always corresponds to a directory
name under arch/.

Therefore, build samples with -D__TARGET_ARCH_$(SRCARCH), since that
matches the expectations of bpf_helpers.h.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add a rule to put test_stub.o in $(OUTPUT) and change the references to
it accordingly. This prevents test_stub.o from being created in the
source directory.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

When directories are used as prerequisites in Makefiles, they can cause
a lot of unnecessary rebuilds, because a directory is considered changed
whenever a file in this directory is added, removed or modified.

If the only thing a target is interested in is the existence of the
directory it depends on, which is the case for selftests/bpf, this
directory should be specified as an order-only prerequisite: it would
still be created in case it does not exist, but it would not trigger a
rebuild of a target in case it's considered changed.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

attach_probe test fails, because it cannot install a kprobe on a
non-existent sys_nanosleep symbol.

Use the correct symbol name for the nanosleep syscall on 64-bit s390.
Don't bother adding one for 31-bit mode, since tests are compiled only
in 64-bit mode.

Fixes: 1e8611bb ("selftests/bpf: add kprobe/uprobe selftests")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Andrii Nakryiko says:

====================
BTF size resolution logic isn't always resolving type size correctly, leading
to erroneous map creation failures due to value size mismatch.

This patch set:
1. fixes the issue (patch #1);
2. adds tests for trickier cases (patch #2);
3. and converts few test cases utilizing BTF-defined maps, that previously
   couldn't use typedef'ed arrays due to kernel bug (patch #3).
====================
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Convert few tests that couldn't use typedef'ed arrays due to kernel bug.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add more BTF tests, validating that size resolution logic is correct in
few trickier cases.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

BTF verifier has a size resolution bug which in some circumstances leads to
invalid size resolution for, e.g., TYPEDEF modifier.  This happens if we have
[1] PTR -> [2] TYPEDEF -> [3] ARRAY, in which case due to being in pointer
context ARRAY size won't be resolved (because for pointer it doesn't matter, so
it's a sink in pointer context), but it will be permanently remembered as zero
for TYPEDEF and TYPEDEF will be marked as RESOLVED. Eventually ARRAY size will
be resolved correctly, but TYPEDEF resolved_size won't be updated anymore.
This, subsequently, will lead to erroneous map creation failure, if that
TYPEDEF is specified as either key or value, as key_size/value_size won't
correspond to resolved size of TYPEDEF (kernel will believe it's zero).

Note, that if BTF was ordered as [1] ARRAY <- [2] TYPEDEF <- [3] PTR, this
won't be a problem, as by the time we get to TYPEDEF, ARRAY's size is already
calculated and stored.

This bug manifests itself in rejecting BTF-defined maps that use array
typedef as a value type:

typedef int array_t[16];

struct {
    __uint(type, BPF_MAP_TYPE_ARRAY);
    __type(value, array_t); /* i.e., array_t *value; */
} test_map SEC(".maps");

The fix consists on not relying on modifier's resolved_size and instead using
modifier's resolved_id (type ID for "concrete" type to which modifier
eventually resolves) and doing size determination for that resolved type. This
allow to preserve existing "early DFS termination" logic for PTR or
STRUCT_OR_ARRAY contexts, but still do correct size determination for modifier
types.

Fixes: eb3f595d ("bpf: btf: Validate type reference")
Cc: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Use PT_REGS_RC(ctx) instead of ctx->rax, which is not present on s390.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Tested-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Right now, on certain architectures, these macros are usable only with
kernel headers. This patch makes it possible to use them with userspace
headers and, as a consequence, not only in BPF samples, but also in BPF
selftests.

On s390, provide the forward declaration of struct pt_regs and cast it
to user_pt_regs in PT_REGS_* macros. This is necessary, because instead
of the full struct pt_regs, s390 exposes only its first member
user_pt_regs to userspace, and bpf_helpers.h is used with both userspace
(in selftests) and kernel (in samples) headers. It was added in commit
466698e6 ("s390/bpf: correct broken uapi for
BPF_PROG_TYPE_PERF_EVENT program type").

Ditto on arm64.

On x86, provide userspace versions of PT_REGS_* macros. Unlike s390 and
arm64, x86 provides struct pt_regs to both userspace and kernel, however,
with different member names.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Also check for __s390__ instead of __s390x__, just in case bpf_helpers.h
is ever used by 32-bit userspace.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This opens up the possibility of accessing registers in an
arch-independent way.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

When compiling an eBPF prog fails, make still returns 0, because
failing clang command's output is piped to llc and therefore its
exit status is ignored.

When clang fails, pipe the string "clang failed" to llc. This will make
llc fail with an informative error message. This solution was chosen
over using pipefail, having separate targets or getting rid of llc
invocation due to its simplicity.

In addition, pull Kbuild.include in order to get .DELETE_ON_ERROR target,
which would cause partial .o files to be removed.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

From commit 9df1c28b ("bpf: add writable context for raw tracepoints"),
a new type of BPF_PROG, RAW_TRACEPOINT_WRITABLE has been added.

Since this BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE is not listed at
bpftool's header, it causes a segfault when executing 'bpftool feature'.

This commit adds BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE entry to
prog_type_name enum, and will eventually fixes the segfault issue.

Fixes: 9df1c28b ("bpf: add writable context for raw tracepoints")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

In preparation to enabling -Wimplicit-fallthrough, this patch silences
the following warning:

kernel/bpf/verifier.c: In function ‘check_return_code’:
kernel/bpf/verifier.c:6106:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (env->prog->expected_attach_type == BPF_CGROUP_UDP4_RECVMSG ||
      ^
kernel/bpf/verifier.c:6109:2: note: here
  case BPF_PROG_TYPE_CGROUP_SKB:
  ^~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

Notice that is much clearer to explicitly add breaks in each case
statement (that actually contains some code), rather than letting
the code to fall through.

This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

bpf_helpers.h fails to compile on sparc: the code should be checking
for defined(bpf_target_sparc), but checks simply for bpf_target_sparc.

Also change #ifdef bpf_target_powerpc to #if defined() for consistency.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

There are 2 call chains:

  a) xsk_bind --> xdp_umem_assign_dev
  b) unregister_netdevice_queue --> xsk_notifier

with the following locking order:

  a) xs->mutex --> rtnl_lock
  b) rtnl_lock --> xdp.lock --> xs->mutex

Different order of taking 'xs->mutex' and 'rtnl_lock' could produce a
deadlock here. Fix that by moving the 'rtnl_lock' before 'xs->lock' in
the bind call chain (a).

Reported-by: syzbot+bf64ec93de836d7f4c2c@syzkaller.appspotmail.com
Fixes: 455302d1 ("xdp: fix hang while unregistering device bound to xdp socket")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Completion queue address reservation could not be undone.
In case of bad 'queue_id' or skb allocation failure, reserved entry
will be leaked reducing the total capacity of completion queue.

Fix that by moving reservation to the point where failure is not
possible. Additionally, 'queue_id' checking moved out from the loop
since there is no point to check it there.

Fixes: 35fcde7f ("xsk: support for Tx")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: William Tu <u9012063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

On 32-bit platforms compiler complains about conversion:

libbpf.c: In function ‘perf_event_open_probe’:
libbpf.c:4112:17: error: cast from pointer to integer of different
size [-Werror=pointer-to-int-cast]
  attr.config1 = (uint64_t)(void *)name; /* kprobe_func or uprobe_path */
                 ^
Reported-by: Matt Hart <matthew.hart@linaro.org>
Fixes: b2650027 ("libbpf: add kprobe/uprobe attach API")
Tested-by: Matt Hart <matthew.hart@linaro.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

When backtracking instructions to propagate precision bit for registers
and stack slots, one class of instructions (BPF_ST) weren't handled
causing extra stack slots to be propagated into parent state. Parent
state might not have that much stack allocated, though, which causes
warning on invalid stack slot usage.

This patch adds handling of BPF_ST instructions:

BPF_MEM | <size> | BPF_ST:   *(size *) (dst_reg + off) = imm32

Reported-by: syzbot+4da3ff23081bafe74fc2@syzkaller.appspotmail.com
Fixes: b5dc0163 ("bpf: precise scalar_value tracking")
Cc: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Ilya Leoshkevich is joining as s390 bpf maintainer. With his background
as gcc developer he would be valuable for the team and community as a
whole. Ilya, have fun!

Since there is now enough eyes on s390 bpf, relieve Christian Borntraeger,
so that he could focus on his maintainer tasks for other components.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@e.ibm.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2019-07-11

This series introduces some fixes to mlx5 driver.

Please pull and let me know if there is any problem.

For -stable v4.15
('net/mlx5e: IPoIB, Add error path in mlx5_rdma_setup_rn')

For -stable v5.1
('net/mlx5e: Fix port tunnel GRE entropy control')
('net/mlx5e: Rx, Fix checksum calculation for new hardware')
('net/mlx5e: Fix return value from timeout recover function')
('net/mlx5e: Fix error flow in tx reporter diagnose')

For -stable v5.2
('net/mlx5: E-Switch, Fix default encap mode')

Conflict note: This pull request will produce a small conflict when
merged with net-next.
In drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
Take the hunk from net and replace:
esw_offloads_steering_init(esw, vf_nvports, total_nvports);
with:
esw_offloads_steering_init(esw);
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox, mlx5 build fixes

I know net-next is closed but these patches are fixing some compiler
build and warnings issues people have been complaining about.

I hope it is not too late, but in case it is a lot of trouble for you,
I guess they can wait.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the following compiler warning:
In function ‘esw_vport_add_ingress_acl_modify_metadata’:
the frame size of 1084 bytes is larger than 1024 bytes [-Wframe-larger-than=]

Since the structure is never written to, we can statically allocate
it to avoid the stack usage.

Fixes: 7445cfb1 ("net/mlx5: E-Switch, Tag packet with vport number in VF vports and uplink ingress ACLs")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Jianbo Liu <jianbol@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In mlx5e_setup_tc "priv" variable is not being used if
CONFIG_MLX5_ESWITCH is off, one way to fix this is to actually use it.

mlx5e_setup_tc_mqprio also needs the "priv" variable and it extracts it
on its own. We can simply pass priv to mlx5e_setup_tc_mqprio instead of
netdev and avoid extracting the priv var, which will also resolve the
compiler warning.

Fixes: 4e95bc26 ("net: flow_offload: add flow_block_cb_setup_simple()")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
CC: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the cited patch below, the Kconfig flags combination of:
CONFIG_MLX5_FPGA is not set
CONFIG_MLX5_TLS=y
CONFIG_MLX5_EN_TLS=y

leads to the compilation error:

./include/linux/mlx5/device.h:61:39: error: invalid application of
sizeof to incomplete type struct mlx5_ifc_tls_flow_bits.

Fix it.

Fixes: 90687e1a9a50 ("net/mlx5: Kconfig, Better organize compilation flags")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
CC: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fl_create() should call static_branch_deferred_inc() only in
case of success.

Also we should not call fl_free() in error path, as this could
cause a static key imbalance.

jump label: negative count!
WARNING: CPU: 0 PID: 15907 at kernel/jump_label.c:221 static_key_slow_try_dec kernel/jump_label.c:221 [inline]
WARNING: CPU: 0 PID: 15907 at kernel/jump_label.c:221 static_key_slow_try_dec+0x1ab/0x1d0 kernel/jump_label.c:206
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 15907 Comm: syz-executor.2 Not tainted 5.2.0-rc6+ #62
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 panic+0x2cb/0x744 kernel/panic.c:219
 __warn.cold+0x20/0x4d kernel/panic.c:576
 report_bug+0x263/0x2b0 lib/bug.c:186
 fixup_bug arch/x86/kernel/traps.c:179 [inline]
 fixup_bug arch/x86/kernel/traps.c:174 [inline]
 do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:272
 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:291
 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:986
RIP: 0010:static_key_slow_try_dec kernel/jump_label.c:221 [inline]
RIP: 0010:static_key_slow_try_dec+0x1ab/0x1d0 kernel/jump_label.c:206
Code: c0 e8 e9 3e e5 ff 83 fb 01 0f 85 32 ff ff ff e8 5b 3d e5 ff 45 31 ff eb a0 e8 51 3d e5 ff 48 c7 c7 40 99 92 87 e8 13 75 b7 ff <0f> 0b eb 8b 4c 89 e7 e8 a9 c0 1e 00 e9 de fe ff ff e8 bf 6d b7 ff
RSP: 0018:ffff88805f9c7450 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 00000000ffffffff RCX: 0000000000000000
RDX: 000000000000e3e1 RSI: ffffffff815adb06 RDI: ffffed100bf38e7c
RBP: ffff88805f9c74e0 R08: ffff88806acf0700 R09: ffffed1015d060a9
R10: ffffed1015d060a8 R11: ffff8880ae830547 R12: ffffffff89832ce0
R13: ffff88805f9c74b8 R14: 1ffff1100bf38e8b R15: 00000000ffffff01
 __static_key_slow_dec_deferred+0x65/0x110 kernel/jump_label.c:272
 fl_free+0xa9/0xe0 net/ipv6/ip6_flowlabel.c:121
 fl_create+0x6af/0x9f0 net/ipv6/ip6_flowlabel.c:457
 ipv6_flowlabel_opt+0x80e/0x2730 net/ipv6/ip6_flowlabel.c:624
 do_ipv6_setsockopt.isra.0+0x2119/0x4100 net/ipv6/ipv6_sockglue.c:825
 ipv6_setsockopt+0xf6/0x170 net/ipv6/ipv6_sockglue.c:944
 tcp_setsockopt net/ipv4/tcp.c:3131 [inline]
 tcp_setsockopt+0x8f/0xe0 net/ipv4/tcp.c:3125
 sock_common_setsockopt+0x94/0xd0 net/core/sock.c:3130
 __sys_setsockopt+0x253/0x4b0 net/socket.c:2080
 __do_sys_setsockopt net/socket.c:2096 [inline]
 __se_sys_setsockopt net/socket.c:2093 [inline]
 __x64_sys_setsockopt+0xbe/0x150 net/socket.c:2093
 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4597c9
Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f2670556c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00000000004597c9
RDX: 0000000000000020 RSI: 0000000000000029 RDI: 0000000000000003
RBP: 000000000075bfc8 R08: 000000000000fdf7 R09: 0000000000000000
R10: 0000000020000000 R11: 0000000000000246 R12: 00007f26705576d4
R13: 00000000004cec00 R14: 00000000004dd520 R15: 00000000ffffffff
Kernel Offset: disabled
Rebooting in 86400 seconds..

Fixes: 59c820b2 ("ipv6: elide flowlabel check if no exclusive leases exist")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Willem forgot to change one of the calls to fl6_sock_lookup(),
which can now return an error or NULL.

syzbot reported :

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 31763 Comm: syz-executor.0 Not tainted 5.2.0-rc6+ #63
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:ip6_datagram_dst_update+0x559/0xc30 net/ipv6/datagram.c:83
Code: 00 00 e8 ea 29 3f fb 4d 85 f6 0f 84 96 04 00 00 e8 dc 29 3f fb 49 8d 7e 20 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 16 06 00 00 4d 8b 6e 20 e8 b4 29 3f fb 4c 89 ee
RSP: 0018:ffff88809ba97ae0 EFLAGS: 00010207
RAX: dffffc0000000000 RBX: ffff8880a81254b0 RCX: ffffc90008118000
RDX: 0000000000000003 RSI: ffffffff86319a84 RDI: 000000000000001e
RBP: ffff88809ba97c10 R08: ffff888065e9e700 R09: ffffed1015d26c80
R10: ffffed1015d26c7f R11: ffff8880ae9363fb R12: ffff8880a8124f40
R13: 0000000000000001 R14: fffffffffffffffe R15: ffff88809ba97b40
FS:  00007f38e606a700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000202c0140 CR3: 00000000a026a000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 __ip6_datagram_connect+0x5e9/0x1390 net/ipv6/datagram.c:246
 ip6_datagram_connect+0x30/0x50 net/ipv6/datagram.c:269
 ip6_datagram_connect_v6_only+0x69/0x90 net/ipv6/datagram.c:281
 inet_dgram_connect+0x14a/0x2d0 net/ipv4/af_inet.c:571
 __sys_connect+0x264/0x330 net/socket.c:1824
 __do_sys_connect net/socket.c:1835 [inline]
 __se_sys_connect net/socket.c:1832 [inline]
 __x64_sys_connect+0x73/0xb0 net/socket.c:1832
 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4597c9
Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f38e6069c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00000000004597c9
RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000003
RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f38e606a6d4
R13: 00000000004bfd07 R14: 00000000004d1838 R15: 00000000ffffffff
Modules linked in:
RIP: 0010:ip6_datagram_dst_update+0x559/0xc30 net/ipv6/datagram.c:83
Code: 00 00 e8 ea 29 3f fb 4d 85 f6 0f 84 96 04 00 00 e8 dc 29 3f fb 49 8d 7e 20 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 16 06 00 00 4d 8b 6e 20 e8 b4 29 3f fb 4c 89 ee

Fixes: 59c820b2 ("ipv6: elide flowlabel check if no exclusive leases exist")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In 323a53c4 ("ipv6: tcp: enable flowlabel reflection in some RST packets")
and 50a8accf ("ipv6: tcp: send consistent flowlabel in TIME_WAIT state")
we took care of IPv6 flowlabel reflections for two cases.

This patch takes care of the remaining case, when the RST packet
is sent on behalf of a 'full' socket.

In Marek use case, this was a socket in TCP_CLOSE state.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Marek Majkowski <marek@cloudflare.com>
Tested-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The length of AH header is computed manually as (hp->hdrlen+2)<<2.
However, in include/linux/ipv6.h, a macro named ipv6_authlen is
already defined for exactly the same job. This commit replaces
the manual computation code with the macro.
Signed-off-by: yangxingwu <xingwu.yang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Switching from ->priv_destructor to dellink() has an unexpected
consequence: existing RCU readers, that is, hsr_port_get_hsr()
callers, may still be able to read the port list.

Instead of checking the return value of each hsr_port_get_hsr(),
we can just move it to ->ndo_uninit() which is called after
device unregister and synchronize_net(), and we still have RTNL
lock there.

Fixes: b9a1e627 ("hsr: implement dellink to clean up resources")
Fixes: edf070a0 ("hsr: fix a NULL pointer deref in hsr_dev_xmit()")
Reported-by: syzbot+097ef84cdc95843fbaa8@syzkaller.appspotmail.com
Cc: Arvid Brodin <arvid.brodin@alten.se>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Arguments are supposed to be ordered high then low.

Fixes: 293e4365 ("stmmac: change descriptor layout")
Fixes: 9f93ac8d ("net-next: stmmac: Add dwmac-sun8i")
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>