- 09 Sep, 2009 40 commits
-
-
Hidetoshi Seto authored
Cleanup. Signed-off-by:
Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org>
-
Hidetoshi Seto authored
Multiple bits might be set in the Uncorrectable Error Status register. But aer_print_error_source() only report a error of the lowest bit set in the error status register. So print strings for all bits unmasked and set. And check First Error Pointer to mark the error occured first. This FEP is not valid when the corresponing bit of the Uncorrectable Error Status register is not set, or unimplemented or undefined. Signed-off-by:
-
Hidetoshi Seto authored
ERR_{,UN}CORRECTABLE_ERROR_MASK are set of error bits which linux know, set of PCI_ERR_COR_* and PCI_ERR_UNC_* defined in linux/pci_regs.h. This masks make aerdrv not to report errors of unknown bit, while aerdrv have ability to report such undefined errors as "Unknown Error Bit %2d". OTOH aerdrv_errprint does not have any check of setting in mask register. So it could report masked wrong error by finding bit in status without knowing that the bit is masked in the mask register. This patch changes aerdrv to use mask state in mask register propely instead of defined/hardcoded ERR_{,UN}CORRECTABLE_ERROR_MASK. This change prevents aerdrv from reporting masked error, and also enable reporting unknown errors. Signed-off-by:Andrew Patterson <andrew.patterson@hp.com> Signed-off-by:
-
Hidetoshi Seto authored
The static buffer errmsg_buff[] is used only for building error message in fixed format, and is protected by a spinlock. This patch removes this buffer and the spinlock. Signed-off-by:
-
Hidetoshi Seto authored
The flag AER_MULTI_ERROR_VALID_FLAG in info->flag does mean that the root port receives multiple error messages. Error messages can be posted from different devices, so it does not mean that each reported device has multiple errors. If there are multiple error devices and the root port has valid error source ID, it would be nice to report which device is the error source reported first. Signed-off-by:
-
Hidetoshi Seto authored
In case of multiple errors, struct aer_err_info would be reused among all reported devices. So the info->status should be initialized before recycled. Otherwise error of one device might be reported as the error of another device. Also info->flags has similar problem on reporting TLP header. Signed-off-by:
-
Hidetoshi Seto authored
Definitions of MASK macros in aerdrv_errprint.c are tricky and unsafe. For example, AER_AGENT_TRANSMITTER_MASK(_sev, _stat) does work like: static inline func(int _sev, int _stat) { if (_sev == AER_CORRECTABLE) return (_stat & (PCI_ERR_COR_REP_ROLL|PCI_ERR_COR_REP_TIMER)); else return (_stat & PCI_ERR_COR_REP_ROLL); } In case of else path here, for uncorrectable errors, testing bits in _stat by PCI_ERR_COR_* does not make sense because _stat should have only PCI_ERR_UNC_* bits originated in uncorrectable error status register. But at this time this is safe because uncorrectable error using bit position same to PCI_ERR_COR_REP_ROLL(= bit position 8) is not defined. Likewise, AER_AGENT_COMPLETER_MASK is always PCI_ERR_UNC_COMP_ABORT but it works because bit 15 of correctable error status is not defined. It means that these MASK macros will turn to be wrong once if new error is defined. (In fact, bit 15 of correctable is now defined in PCIe 2.1) This patch changes these MASK macros to be more strict, not to return PCI_ERR_COR_* bits for uncorrectable error status and vise versa. Signed-off-by: -
Hidetoshi Seto authored
Add workaround macro to reduce the number of checkpatch warning: WARNING: printk() should include KERN_ facility level Before: total: 0 errors, 10 warnings, 247 lines checked After: total: 0 errors, 1 warnings, 243 lines checked Signed-off-by:
-
Hidetoshi Seto authored
Before: drivers/pci/pcie/aer/aer_inject.c total: 4 errors, 4 warnings, 473 lines checked drivers/pci/pcie/aer/aerdrv.c total: 5 errors, 2 warnings, 333 lines checked drivers/pci/pcie/aer/aerdrv.h total: 1 errors, 0 warnings, 139 lines checked drivers/pci/pcie/aer/aerdrv_core.c total: 4 errors, 3 warnings, 872 lines checked drivers/pci/pcie/aer/aerdrv_errprint.c total: 12 errors, 11 warnings, 248 lines checked After: drivers/pci/pcie/aer/aer_inject.c total: 0 errors, 0 warnings, 466 lines checked drivers/pci/pcie/aer/aerdrv.c total: 0 errors, 0 warnings, 335 lines checked drivers/pci/pcie/aer/aerdrv.h total: 0 errors, 0 warnings, 139 lines checked drivers/pci/pcie/aer/aerdrv_core.c total: 0 errors, 0 warnings, 869 lines checked drivers/pci/pcie/aer/aerdrv_errprint.c total: 0 errors, 10 warnings, 247 lines checked Signed-off-by:
-
Tejun Heo authored
Add ids module parameter which allows specifying initial IDs for the pci-stub driver. When built into the kernel, pci-stub is linked before any real pci drivers and by setting up IDs from initialization it can prevent built-in drivers from attaching to specific devices. While at it, make pci_stub_probe() print out about devices it grabbed to weed out "but my controller isn't being probed" bug reports. Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Tejun Heo authored
Separate out pci_add_dynid() from store_new_id() and export it so that in-kernel code can add PCI IDs dynamically. As the function will be available regardless of HOTPLUG, put it and pull pci_free_dynids() outside of CONFIG_HOTPLUG. This will be used by pci-stub to initialize initial IDs via module param. While at it, remove bogus get_driver() failure check. Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Reviewed-by:
Grant Grundler <grundler@parisc-linux.org> Signed-off-by:
-
Kenji Kaneshige authored
Add support for PCI-E 5.0 GT/s in max_bus_speed and cur_bus_speed. Reviewed-by:
Matthew Wilcox <matthew@wil.cx> Signed-off-by:
Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by:
-
Kenji Kaneshige authored
Fix typo in PCI-E link speed. Reviewed-by:
-
Kenji Kaneshige authored
The L0s state can be managed separately for each direction (upstream direction and downstream direction) of the link. But in the current implementation, those are mixed up. With this patch, L0s for each direction are managed separately. To maintain three states (upstream direction L0s, downstream L0s and L1), 'aspm_support', 'aspm_enabled', 'aspm_capable', 'aspm_disable' and 'aspm_default' fields in struct pcie_link_state are changed to 3-bit from 2-bit. The 'latency' field is separated to two 'latency_up' and 'latency_dw' fields to maintain exit latencies for each direction of the link. For L0, 'latency_up.l0' and 'latency_dw.l0' are used to configure upstream direction L0s and downstream direction L0s respectively. For L1, larger value of 'latency_up.l1' and 'latency_dw.l1' is considered as L1 exit latency. Acked-by:
Shaohua Li <shaohua.li@intel.com> Signed-off-by:
-
Kenji Kaneshige authored
In the current implementation, ASPM L0s/L1 is disabled for all links in the hierarchy if one of the link doesn't meet latency requirement. But we can partially enable ASPM L0s/L1 on sub-tree in the hierarchy. This patch allows partial L0s/L1 enablement in the hierarchy. And it also reduce the calculation cost of ASPM configuration very much. In the previous implementation, all links were enabled with the same state. With this patch, enabled state for each link is determined simply as follows (the 'requested' is from policy_to_aspm_state()). enabled = requested & (link->aspm_capable & link->aspm_disable) Acked-by: -
Kenji Kaneshige authored
Introduce 'aspm_capable' field to maintain the capable ASPM setting of the link. By the 'aspm_capable', we don't need to recheck latency every time ASPM policy is changed. Each bit in 'aspm_capable' is associated to ASPM state (L0S/L1). The bit is set if the associated ASPM state is supported by the link and it satisfies the latency requirement (i.e. exit latency < endpoint acceptable latency). The 'aspm_capable' is updated when - an endpoint device is added (boot time or hot-plug time) - an endpoint device is removed (hot-unplug time) - PCI power state is changed. Acked-by:
-
Kenji Kaneshige authored
Introduce 'aspm_disable' flag to manage disabled ASPM state more robust way. Acked-by:
-
Kenji Kaneshige authored
Fix possible NULL dereference in pcie_aspm_exit_link_state(). This patch also cleanup some code. Acked-by:
-
Kenji Kaneshige authored
Remove the following check in __pcie_aspm_config_link() because it nerver be true. Acked-by:
-
Kenji Kaneshige authored
We must not clear bits in 'aspm_enabled' using 'aspm_support', or 'aspm_enabled' and 'aspm_default' might be different from the actual state. In addtion, 'aspm_default' should be intialized even if 'aspm_support' is 0. Acked-by:
-
Alexander Duyck authored
This patch adds the most recent additions to the list of 82576 device IDs to the list of devices needing the SR-IOV quirk. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Tiago Vignatti authored
Document the new VGA arbiter. Signed-off-by:
Tiago Vignatti <tiago.vignatti@nokia.com> Signed-off-by:
-
Dave Airlie authored
Fix some warnings reported in linux-next + also cleanup some comment errors noticed by Pekka Paalanen. Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Mike Mason authored
By default, the EEH framework on powerpc does what's known as a "hot reset" during recovery of a PCI Express device. We've found a case where the device needs a "fundamental reset" to recover properly. The current PCI error recovery and EEH frameworks do not support this distinction. The attached patch makes changes to EEH to utilize the new bit field. Signed-off-by:
Mike Mason <mmlnx@us.ibm.com> Signed-off-by:
Richard Lary <rlary@us.ibm.com> Signed-off-by:
-
Mike Mason authored
The attached patch updates the Documentation/PCI/pci-error-recovery.txt file with changes related to this new bit field, as well a few unrelated updates. Signed-off-by:
Linas Vepstas <linasvepstas@gmail.com> Signed-off-by:
-
Mike Mason authored
This is the first of three patches that implement a bit field that PCI Express device drivers can use to indicate they need a fundamental reset during error recovery. By default, the EEH framework on powerpc does what's known as a "hot reset" during recovery of a PCI Express device. We've found a case where the device needs a "fundamental reset" to recover properly. The current PCI error recovery and EEH frameworks do not support this distinction. The attached patch (courtesy of Richard Lary) adds a bit field to pci_dev that indicates whether the device requires a fundamental reset during recovery. These patches supersede the previously submitted patch that implemented a fundamental reset bit field. Signed-off-by:
-
Benjamin Herrenschmidt authored
Background: Graphic devices are accessed through ranges in I/O or memory space. While most modern devices allow relocation of such ranges, some "Legacy" VGA devices implemented on PCI will typically have the same "hard-decoded" addresses as they did on ISA. For more details see "PCI Bus Binding to IEEE Std 1275-1994 Standard for Boot (Initialization Configuration) Firmware Revision 2.1" Section 7, Legacy Devices. The Resource Access Control (RAC) module inside the X server currently does the task of arbitration when more than one legacy device co-exists on the same machine. But the problem happens when these devices are trying to be accessed by different userspace clients (e.g. two server in parallel). Their address assignments conflict. Therefore an arbitration scheme _outside_ of the X server is needed to control the sharing of these resources. This document introduces the operation of the VGA arbiter implemented for Linux kernel. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Hidetoshi Seto authored
Cleanups (nearly based on checkpatch). Before: total: 11 errors, 2 warnings, 0 checks, 842 lines checked After: total: 0 errors, 0 warnings, 0 checks, 842 lines checked v2: fix it's/its mistakes in comment Reviewed-by:
Matthew Wilcox <willy@linux.intel.com> Signed-off-by:
-
Hidetoshi Seto authored
Cleanup based on the prototype from Matthew Milcox. Reviewed-by:
-
Hidetoshi Seto authored
Cleanup based on the prototype from Matthew Milcox. Reviewed-by:
-
Hidetoshi Seto authored
Cleanup based on the prototype from Matthew Milcox. Reviewed-by:
-
Hidetoshi Seto authored
Move it from the middle of the function to the end. Reviewed-by:
-
Hidetoshi Seto authored
Unify msi_free_irqs() and msix_free_all_irqs(), and rename it to a common void function free_msi_irqs(). And relocate the common function to where the prototype is located now. Reviewed-by:
-
Hidetoshi Seto authored
use list_first_entry() instead of list_entry(). Reviewed-by:
-
Hidetoshi Seto authored
The msi_list never have MSI-X's msi_desc while MSI is enabled, and also it never have MSI's msi_desc while MSI-X is enabled. This patch remove check for MSI-X entry from the pci_disable_msi(), referring that pci_disable_msix() does not have any check for MSI entry. Reviewed-by:
-
Alex Williamson authored
This avoids a "Malformed early option 'iommu'" on boot when trying to use pass-through mode. Signed-off-by:
Alex Williamson <alex.williamson@hp.com> Signed-off-by:
-
Dave Jones authored
IDs should generally only be added to pci_ids.h when they're shared across several files in the tree. IDs that are just used by a single driver should be defined in the driver instead. Perhaps documenting this is a good idea to prevent things being moved there, as it still seems to be happening judging from the git log. (based on discussion w/gregkh and others). Acked-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Yinghai Lu authored
We already print it out for pci bridges, so also print it out for pci devices. Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
Tejun Heo authored
http://bugzilla.kernel.org/show_bug.cgi?id=12542 reports that with the quirk not applied on resume, msi stops working after resuming and mcp78s ahci fails due to IRQ mis-delivery. Apply it on resume too. Signed-off-by:
Nicolas Derive <kalon33@ubuntu.com> Cc: Greg KH <greg@kroah.com> Cc: <stable@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Andi Kleen authored
Shut off the long standing linux/drivers/pci/search.c:144: warning: 'pci_find_device' is deprecated (declared at linux/drivers/pci/search.c:136) linux/drivers/pci/search.c:144: warning: 'pci_find_device' is deprecated (declared at linux/drivers/pci/search.c:136) warnings that appear on every build when CONFIG_PCI_LEGACY is enabled. gcc warns for the use in EXPORT_SYMBOL I moved these to a separate file and disabled the warning in the Makefile for that file. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
