Merge tag 'tag-chrome-platform-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Tzung-Bi Shih:
 "Improvements:

   - Annotate flexible array members with __counted_by

   - Convert platform drivers' .remove callbacks to return void

  Fixes:

   - Avoid MKBP event timeouts by disabling/enabling IRQ later/earlier

  Misc:

   - Minor cleanups and fixes"

* tag 'tag-chrome-platform-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (21 commits)
  platform/chrome: cros_ec_lpc: Separate host command and irq disable
  platform/chrome: kunit: make EC protocol tests independent
  platform/chrome: kunit: initialize lock for fake ec_dev
  platform/chrome: cros_ec: fix compilation warning
  platform/chrome: cros_ec_proto: Mark outdata as const
  platform/chrome: cros_typec_vdm: Mark port_amode_ops const
  platform/chrome: cros_ec_typec: Use dev_err_probe() more
  platform/chrome: cros_ec_typec: Use semi-colons instead of commas
  platform/chrome/wilco_ec: telemetry: Convert to platform remove callback returning void
  platform/chrome/wilco_ec: debugfs: Convert to platform remove callback returning void
  platform/chrome/wilco_ec: core: Convert to platform remove callback returning void
  platform/chrome: cros_usbpd_notify: Convert to platform remove callback returning void
  platform/chrome: cros_usbpd_logger: Convert to platform remove callback returning void
  platform/chrome: cros_typec_switch: Convert to platform remove callback returning void
  platform/chrome: cros_ec_vbc: Convert to platform remove callback returning void
  platform/chrome: cros_ec_sysfs: Convert to platform remove callback returning void
  platform/chrome: cros_ec_lpc: Convert to platform remove callback returning void
  platform/chrome: cros_ec_lightbar: Convert to platform remove callback returning void
  platform/chrome: cros_ec_debugfs: Convert to platform remove callback returning void
  platform/chrome: cros_ec_chardev: Convert to platform remove callback returning void
  ...

Pull hwmon updates from Guenter Roeck:
 "New drivers:

   - Driver for LTC2991

   - Driver for POWER-Z

  Added chip / system support to existing drivers:

   - The ina238 driver now also supports INA237

   - The asus-ec-sensors driver now supports ROG Crosshair X670E Gene

   - The aquacomputer_d5next now supports Aquacomputer High Flow USB and
     MPS Flow

   - The pmbus/mpq7932 driver now also supports MPQ2286

   - The nct6683 now also supports ASRock X670E Taichi

  Various other minor improvements and fixes:

   - One patch series to call out is the conversion of hwmon platform
     drivers to use the platform remove callback returning void"

* tag 'hwmon-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (69 commits)
  hwmon: (aquacomputer_d5next) Check if temp sensors of legacy devices are connected
  hwmon: (aquacomputer_d5next) Add support for Aquacomputer High Flow USB and MPS Flow
  dt-bindings: hwmon: npcm: Add npcm845 compatible string
  hwmon: Add driver for ltc2991
  dt-bindings: hwmon: ltc2991: add bindings
  hwmon: (pmbus/max31785) Add delay between bus accesses
  hwmon: (ina238) add ina237 support
  dt-bindings: hwmon: ti,ina2xx: add ti,ina237
  hwmon: (asus-ec-sensors) add ROG Crosshair X670E Gene.
  hwmon: (max31827) handle vref regulator
  hwmon: (ina3221) Add support for channel summation disable
  dt-bindings: hwmon: ina3221: Add ti,summation-disable
  dt-bindings: hwmon: ina3221: Convert to json-schema
  hwmon: (pmbus/mpq7932) Add a support for mpq2286 Power Management IC
  hwmon: (pmbus/core) Add helper macro to define single pmbus regulator
  regulator: dt-bindings: Add mps,mpq2286 power-management IC
  hwmon: (pmbus/mpq7932) Get page count based on chip info
  dt-bindings: hwmon: Add possible new properties to max31827 bindings
  hwmon: (max31827) Modify conversion wait time
  hwmon: (max31827) Make code cleaner
  ...

Pull spi updates from Mark Brown:
 "This is a very quiet release for SPI, we've got cleanups and minor
  fixes but only a few new driver specific features. The bulk of the
  changes in terms of diffstat are the cleanups, plus one bit of
  performance work for McSPI.

   - Conversions to use devm_clk_get_enabled() and to remove outdated
     terms for controller and device

   - Device mode support for the Renesas CSI

   - Cleanups and improvements to the device tree bindings aimed at
     making validation better

   - PIO FIFO usage for the OMAP2 McSPI, improving performance"

* tag 'spi-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (75 commits)
  spi: omap2-mcspi: Add FIFO support without DMA
  spi: stm32: Explicitly include correct DT includes
  spi: Export acpi_spi_find_controller_by_adev()
  spi: nxp-fspi: use the correct ioremap function
  spi: Don't use flexible array in struct spi_message definition
  spi: bcm2835: add a sentinel at the end of the lookup array
  spi: spi-geni-qcom: Rename the label unmap_if_dma
  spi: rzv2m-csi: Add target mode support
  spi: renesas,rzv2m-csi: Add CSI (SPI) target related property
  spi: spidev: make spidev_class constant
  spi: mpc52xx-psc: Make mpc52xx_psc_spi_transfer_one_message() static
  spi: spi-cadence-quadspi: Fix missing unwind goto warnings
  spi: omap2-mcspi: Fix hardcoded reference clock
  spi: dt-bindings: Make "additionalProperties: true" explicit
  spi: at91-usart: Remove some dead code
  spi: dt-bindings: st,stm32-spi: Move "st,spi-midi-ns" to spi-peripheral-props.yaml
  spi: qup: Vote for interconnect bandwidth to DRAM
  spi: dt-bindings: qup: Document interconnects
  spi: qup: Parse OPP table for DVFS support
  spi: dt-bindings: qup: Document power-domains and OPP
  ...

Pull regulator updates from Mark Brown:
 "This has been a fairly quiet release for the regulator API, the
  changes are dominated by some new drivers and a quite large set of
  cleanups and filling in the blanks of features for the existing MT6358
  driver.

   - Cleanups and additional features for the Mediatek MT6358 driver

   - Under voltage detection in the fixed regulator

   - Support for Maxim MAX77503, Mediatek MT6366, Qualcomm PM8909,
     PM8919, PMA8048 and PMC8380"

* tag 'regulator-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (45 commits)
  regulator (max5970): Remove duplicate line
  regulator (max5970): Add hwmon support
  regulator: qcom-rpmh: Fix smps4 regulator for pm8550ve
  regulator: qcom,rpmh: Add PMC8380 compatible
  regulator: qcom-rpmh: Add regulators support for PMC8380
  regulator: fixed: add support for under-voltage IRQ
  regulator: dt-bindings: fixed-regulator: Add under-voltage interrupt support
  dt-bindings: regulator: dlg,da9210: Convert to json-schema
  regulator: dt-bindings: Add ADI MAX77503 support
  regulator: max77503: Add ADI MAX77503 support
  regulator: Use device_get_match_data()
  regulator: da9121: Use i2c_get_match_data()
  regulator: Drop unnecessary of_match_device() calls
  regulator: da9063: Annotate struct da9063_regulators with __counted_by
  regulator: da9062: Annotate struct da9062_regulators with __counted_by
  regulator: mt6358: Add supply names for MT6366 regulators
  regulator: mt6358: Add missing regulators for MT6366
  regulator: mt6358: Make MT6366 vcn18 LDO configurable
  regulator: mt6358: fix and drop type prefix in MT6366 regulator node names
  regulator: mt6358: Add supply names for MT6358 regulators
  ...

Pull regmap updates from Mark Brown:
 "The main change here is a fix for an issue where we were letting the
  selector for windowed register ranges get out of sync with the
  hardware during a cache sync plus associated KUnit tests. This was
  reported just at the end of the release cycle and only in -next for a
  day prior to the merge window so it seemed better to hold off for now,
  the bug had been present for more than a decade so wasn't causing too
  many practical problems hopefully.

  There's also a fix for error handling in the debugfs output from
  Christope Jaillet"

* tag 'regmap-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Ensure range selector registers are updated after cache sync
  regmap: kunit: Add test for cache sync interaction with ranges
  regmap: kunit: Fix marking of the range window as volatile
  regmap: debugfs: Fix a erroneous check after snprintf()

Pull gpio updates from Bartosz Golaszewski:
 "We don't have any new drivers. The loongson driver is getting extended
  with support for new models. There's a big refactor of gpio-pca953x
  and many small improvements to others.

  The GPIO code in the kernel has acquired a lot of cruft over the years
  as well as many abusers of the API across the kernel tree. This
  release cycle we have started a major cleanup and improvement effort
  that will most likely span several releases. We have started by
  converting external users of struct gpio_chip to accessing the wrapper
  around it - struct gpio_device. This is because the latter is
  reference counted while the former is removed when the provider is
  unbound. We also removed several instances of drivers accessing
  private GPIOLIB structures and including the private header from
  drivers/gpio/.

  To that end you'll see several commits aimed at different subsystems
  (acked by relevant maintainers) as well as two merges from the
  x86/platform tree.

  We'll then rework the locking in GPIOLIB which currently uses a big
  spinlock for many different things and could use becoming more
  fine-grained, especially as it doesn't even get the locking right.
  We'll also use SRCU for protecting the gpio_chip pointer against
  in-kernel hot-unplug crashes similar to what we saw triggered from
  user-space and fixed with semaphores in gpiolib-cdev. The core GPIOLIB
  is still vulnerable to these use-cases. I'm just mentioning the plans
  here, this is not part of this PR.

  You'll see some new instances of using __free(). We've added a
  gpio_device_put cleanup helper similar to the put_device one
  introduced by Peter Zijlstra and used it according to the preferred
  pattern except where it didn't make sense.

  GPIOLIB core:
   - provide interfaces allowing users to retrieve, manage and query the
     reference counted GPIO device instead of accessing the private
     gpio_chip structure
   - replace gpiochip_find() with gpio_device_find()
   - remove unused acpi_get_and_request_gpiod()
   - improve the ignore_interrupt functionality in GPIO ACPI
   - correct notifier return codes in gpiolib-of
   - unexport gpiod_set_transitory() as it's unused outside of core GPIO
     code
   - while there are still external users accessing struct gpio_chip,
     let's make gpiochip_get_desc() public so that they at least use the
     preferred helper
   - improve locking for lookup tables
   - annotate struct linereq with __counted_by
   - improve GPIOLIB docs
   - add an OF quirk for LED trigger sources

  Driver improvements:
   - convert all GPIO drivers with .remove() callbacks to using the new
     variant returning void instead of int
   - stop accessing the GPIOLIB private structures in gpio-mockup,
     i2c-mux-gpio, hte-tegra194, gpio-sim
   - use the recommended pattern for autofree variables in gpio-sim
   - add support for more models to gpio-loongson
   - use a notifier chain to notify other blocks about interrupts in
     gpio-eic-sprd instead of looking up GPIO devices on every interrupt
   - convert gpio-pca953x and gpio-fx6408 to using the maple tree regmap
     cache
   - don't include GPIOLIB internal headers in drivers which don't need
     them
   - move the ingenic NAND quirk into gpiolib-of
   - add an ignore interrupt quirk for Peaq C1010
   - drop static GPIO base from gpio-omap, gpio-f7188x
   - use the preferred device_get_match_data() function in drivers that
     still don't
   - refactor gpio-pca953x: switch to using DEFINE_SIMPLE_DEV_PM_OPS(),
     use cleanup helpers, use dev_err_probe() where it makes sense,
     fully convert to using devres and some other minor tweaks

  DT bindings:
   - add support for a new model to gpio-vf610 and update existing
     properties
   - add support for more loongson models
   - add missing support for imx models that are used but undocumented
   - convert bindings for Intel IXP4xx to schema

  Minor stuff:
   - deprecate gpio-mockup in favor of gpio-sim
   - include missing headers here and there
   - stop using gpiochip_find() in OMAP1 board files
   - minor tweaks in gpio-vf610, gpio-hisi
   - remove unneeded 'extern' specifiers from headers"

* tag 'gpio-updates-for-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (108 commits)
  hte: tegra194: add GPIOLIB dependency
  hte: tegra194: don't access struct gpio_chip
  gpiolib: provide gpio_device_get_base()
  i2c: mux: gpio: don't fiddle with GPIOLIB internals
  gpiolib: provide gpiod_to_gpio_device()
  gpiolib: provide gpio_device_to_device()
  gpio: hisi: Fix format specifier
  gpiolib: provide gpio_device_find_by_fwnode()
  gpio: acpi: remove acpi_get_and_request_gpiod()
  gpio: Use device_get_match_data()
  gpio: vf610: update comment for i.MX8ULP and i.MX93 legacy compatibles
  platform/x86: int3472: Switch to devm_get_gpiod()
  platform/x86: int3472: Stop using gpiod_toggle_active_low()
  platform/x86: int3472: Add new skl_int3472_gpiod_get_from_temp_lookup() helper
  platform/x86: int3472: Add new skl_int3472_fill_gpiod_lookup() helper
  gpio: vf610: simplify code by dropping data check
  gpio: vf610: add i.MX8ULP of_device_id entry
  dt-bindings: gpio: vf610: add i.MX95 compatible
  dt-bindings: gpio: vf610: correct i.MX8ULP and i.MX93
  dt-bindings: gpio: vf610: update gpio-ranges
  ...

Pull power management updates from Rafael Wysocki:
 "These add new hardware support (new Qualcomm SoC versions in cpufreq,
  RK3568/RK3588 in devfreq), extend the OPP (operating performance
  points) framework, improve cpufreq governors, fix issues and clean up
  code (most of the changes are in cpufreq and devfreq).

  Specifics:

   - Add support for several Qualcomm SoC versions and other similar
     changes (Christian Marangi, Dmitry Baryshkov, Luca Weiss, Neil
     Armstrong, Richard Acayan, Robert Marko, Rohit Agarwal, Stephan
     Gerhold and Varadarajan Narayanan)

   - Clean up the tegra cpufreq driver (Sumit Gupta)

   - Use of_property_read_reg() to parse "reg" in pmac32 driver (Rob
     Herring)

   - Add support for TI's am62p5 Soc (Bryan Brattlof)

   - Make ARM_BRCMSTB_AVS_CPUFREQ depends on !ARM_SCMI_CPUFREQ (Florian
     Fainelli)

   - Update Kconfig to mention i.MX7 as well (Alexander Stein)

   - Revise global turbo disable check in intel_pstate (Srinivas
     Pandruvada)

   - Carry out initialization of sg_cpu in the schedutil cpufreq
     governor in one loop (Liao Chang)

   - Simplify the condition for storing 'down_threshold' in the
     conservative cpufreq governor (Liao Chang)

   - Use fine-grained mutex in the userspace cpufreq governor (Liao
     Chang)

   - Move is_managed indicator in the userspace cpufreq governor into a
     per-policy structure (Liao Chang)

   - Rebuild sched-domains when removing cpufreq driver (Pierre Gondois)

   - Fix buffer overflow detection in trans_stats() (Christian Marangi)

   - Switch to dev_pm_opp_find_freq_(ceil/floor)_indexed() APIs to
     support specific devices like UFS which handle multiple clocks
     through OPP (Operating Performance Point) framework (Manivannan
     Sadhasivam)

   - Add perf support to the Rockchip DFI (DDR Monitor Module) devfreq-
     event driver:
      * Generalize rockchip-dfi.c to support new RK3568/RK3588 using
        different DDR type (Sascha Hauer).
      * Convert DT binding document format to yaml (Sascha Hauer).
      * Add perf support for DFI (a unit suitable for measuring DDR
        utilization) to rockchip-dfi.c to extend DFI usage (Sascha
        Hauer)

   - Add locking to the OPP handling code in the Mediatek CCI devfreq
     driver, because the voltage of shared OPP might be changed by
     multiple drivers (Mark Tseng, Dan Carpenter)

   - Use device_get_match_data() in the Samsung Exynos PPMU
     devfreq-event driver (Rob Herring)

   - Extend support for the opp-level beyond required-opps (Ulf Hansson)

   - Add dev_pm_opp_find_level_floor() (Krishna chaitanya chundru)

   - dt-bindings: Allow opp-peak-kBpsfor kryo CPUs, support Qualcomm
     Krait SoCs and document named opp-microvolt property (Bjorn
     Andersson, Dmitry Baryshkov and Christian Marangi)

   - Fix -Wunsequenced warning _of_add_opp_table_v1() (Nathan
     Chancellor)

   - General cleanup of OPP code (Viresh Kumar)

   - Use __get_safe_page() rather than touching the list in hibernation
     snapshot code (Brian Geffon)

   - Fix symbol export for _SIMPLE_ variants of _PM_OPS() (Raag Jadav)

   - Clean up sync_read handling in snapshot_write_next() (Brian Geffon)

   - Fix kerneldoc comments for swsusp_check() and swsusp_close() to
     better match code (Christoph Hellwig)

   - Downgrade BIOS locked limits pr_warn() in the Intel RAPL power
     capping driver to pr_debug() (Ville Syrjälä)

   - Change the minimum python version for the intel_pstate_tracer
     utility from 2.7 to 3.6 (Doug Smythies)"

* tag 'pm-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (82 commits)
  dt-bindings: cpufreq: qcom-hw: document SM8650 CPUFREQ Hardware
  cpufreq: arm: Kconfig: Add i.MX7 to supported SoC for ARM_IMX_CPUFREQ_DT
  cpufreq: qcom-nvmem: add support for IPQ8064
  cpufreq: qcom-nvmem: also accept operating-points-v2-krait-cpu
  cpufreq: qcom-nvmem: drop pvs_ver for format a fuses
  dt-bindings: cpufreq: qcom-cpufreq-nvmem: Document krait-cpu
  cpufreq: qcom-nvmem: add support for IPQ6018
  dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ6018
  cpufreq: qcom-nvmem: Add MSM8909
  cpufreq: qcom-nvmem: Simplify driver data allocation
  powercap: intel_rapl: Downgrade BIOS locked limits pr_warn() to pr_debug()
  cpufreq: stats: Fix buffer overflow detection in trans_stats()
  dt-bindings: devfreq: event: rockchip,dfi: Add rk3588 support
  dt-bindings: devfreq: event: rockchip,dfi: Add rk3568 support
  dt-bindings: devfreq: event: convert Rockchip DFI binding to yaml
  PM / devfreq: rockchip-dfi: add support for RK3588
  PM / devfreq: rockchip-dfi: account for multiple DDRMON_CTRL registers
  PM / devfreq: rockchip-dfi: make register stride SoC specific
  PM / devfreq: rockchip-dfi: Add perf support
  PM / devfreq: rockchip-dfi: give variable a better name
  ...

Pull ACPI updates from Rafael Wysocki:
 "These fix issues, add new quirks, rearrange the IRQ override quirk
  definitions, add new helpers and switch over code to using them,
  rework a couple of interfaces to be more flexible, eliminate strncpy()
  usage from PNP, extend the ACPI PCC mailbox driver and clean up code.

  This is based on ACPI thermal driver changes that are present in the
  thermal control updates for 6.7-rc1 pull request (they are depended on
  by the ACPI utilities updates). However, the ACPI thermal driver
  changes are not included in the list of specific ACPI changes below.

  Specifics:

   - Add symbol definitions related to CDAT to the ACPICA code (Dave
     Jiang)

   - Use the acpi_device_is_present() helper in more places and rename
     acpi_scan_device_not_present() to be about enumeration (James
     Morse)

   - Add __printf format attribute to acpi_os_vprintf() (Su Hui)

   - Clean up departures from kernel coding style in the low-level
     interface for ACPICA (Jonathan Bergh)

   - Replace strncpy() with strscpy() in acpi_osi_setup() (Justin Stitt)

   - Fail FPDT parsing on zero length records and add proper handling
     for fpdt_process_subtable() to acpi_init_fpdt() (Vasily Khoruzhick)

   - Rework acpi_handle_list handling so as to manage it dynamically,
     including size computation (Rafael Wysocki)

   - Clean up ACPI utilities code so as to make it follow the kernel
     coding style (Jonathan Bergh)

   - Consolidate IRQ trigger-type override DMI tables and drop .ident
     values from dmi_system_id tables used for ACPI resources management
     quirks (Hans de Goede)

   - Add ACPI IRQ override for TongFang GMxXGxx (Werner Sembach)

   - Allow _DSD buffer data only for byte accessors and document the
     _DSD data buffer GUID (Andy Shevchenko)

   - Drop BayTrail and Lynxpoint pinctrl device IDs from the ACPI LPSS
     driver, because it does not need them (Raag Jadav)

   - Add acpi_backlight=vendor quirk for Toshiba Portégé R100 (Ondrej
     Zary)

   - Add "vendor" backlight quirks for 3 Lenovo x86 Android tablets
     (Hans de Goede)

   - Move Xiaomi Mi Pad 2 backlight quirk to its own section (Hans de
     Goede)

   - Annotate struct prm_module_info with __counted_by (Kees Cook)

   - Fix AER info corruption in aer_recover_queue() when error status
     data has multiple sections (Shiju Jose)

   - Make APEI use ERST maximum execution time for slow devices (Jeshua
     Smith)

   - Add support for platform notification handling to the PCC mailbox
     driver and modify it to support shared interrupts for multiple
     subspaces (Huisong Li)

   - Define common macros to use when referring to various bitfields in
     the PCC generic communications channel command and status fields
     and use them in some drivers (Sudeep Holla)

   - Add EC GPE detection quirk for HP 250 G7 Notebook PC (Jonathan
     Denose)

   - Fix and clean up create_pnp_modalias() and create_of_modalias()
     (Christophe JAILLET)

   - Modify 2 pieces of code to use acpi_evaluate_dsm_typed() (Andy
     Shevchenko)

   - Define acpi_dev_uid_match() for matching _UID and use it in several
     places (Raag Jadav)

   - Use acpi_device_uid() for fetching _UID in 2 places (Raag Jadav)

   - Add context argument to acpi_dev_install_notify_handler() (Rafael
     Wysocki)

   - Clarify ACPI bus concepts in the ACPI device enumeration
     documentation (Rafael Wysocki)

   - Switch over the ACPI AC and ACPI PAD drivers to using the platform
     driver interface which, is more logically consistent than binding a
     driver directly to an ACPI device object, and clean them up (Michal
     Wilczynski)

   - Replace strncpy() in the PNP code with either memcpy() or strscpy()
     as appropriate (Justin Stitt)

   - Clean up coding style in pnp.h (GuoHua Cheng)"

* tag 'acpi-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits)
  ACPI: resource: Do IRQ override on TongFang GMxXGxx
  perf: arm_cspmu: use acpi_dev_hid_uid_match() for matching _HID and _UID
  ACPI: EC: Add quirk for HP 250 G7 Notebook PC
  ACPI: x86: use acpi_dev_uid_match() for matching _UID
  ACPI: utils: use acpi_dev_uid_match() for matching _UID
  pinctrl: intel: use acpi_dev_uid_match() for matching _UID
  ACPI: utils: Introduce acpi_dev_uid_match() for matching _UID
  ACPI: sysfs: Clean up create_pnp_modalias() and create_of_modalias()
  ACPI: sysfs: Fix create_pnp_modalias() and create_of_modalias()
  ACPI: acpi_pad: Rename ACPI device from device to adev
  ACPI: acpi_pad: Use dev groups for sysfs
  ACPI: acpi_pad: Replace acpi_driver with platform_driver
  ACPI: APEI: Use ERST timeout for slow devices
  ACPI: scan: Rename acpi_scan_device_not_present() to be about enumeration
  PNP: replace deprecated strncpy() with memcpy()
  PNP: ACPI: replace deprecated strncpy() with strscpy()
  perf: qcom: use acpi_device_uid() for fetching _UID
  ACPI: sysfs: use acpi_device_uid() for fetching _UID
  ACPI: scan: Use the acpi_device_is_present() helper in more places
  ACPI: AC: Rename ACPI device from device to adev
  ...

Pull thermal control updates from Rafael Wysocki:
 "These further rework the ACPI thermal driver, after the changes made
  to it in the previous cycle, to make it easier to grasp, get rid of
  redundant pieces of internal data structures and eliminate its
  reliance on a specific ordering of trip point objects in the thermal
  core, make thermal core adjustments needed for the ACPI thermal driver
  rework, modify the thermal governor interface so as to use trip
  pointers for representing trip points in it, switch over multiple
  thermal drivers to using void platform driver remove callbacks, add
  support for 2 hardware features to the Intel int340x thermal driver,
  add support for new hardware on ARM platforms, update documentation,
  fix problems, clean up code and update the MAINTAINERS record for
  thermal control.

  Specifics:

   - Untangle the initialization and updates of passive and active trip
     points in the ACPI thermal driver (Rafael Wysocki)

   - Reduce code duplication related to the initialization and updates
     of trip points in the ACPI thermal driver (Rafael Wysocki)

   - Use trip pointers for cooling device binding in the ACPI thermal
     driver (Rafael Wysocki)

   - Simplify critical and hot trips representation in the ACPI thermal
     driver (Rafael Wysocki)

   - Use trip pointers in thermal governors and in the related part of
     the thermal core (Rafael Wysocki)

   - Drop the trips_disabled bitmask that has become redundant from the
     thermal core (Rafael Wysocki)

   - Avoid updating trip points when the thermal zone temperature falls
     into a trip point's hysteresis range (ícolas F. R. A. Prado)

   - Add power floor notifications support to the int340x thermal
     control driver (Srinivas Pandruvada)

   - Rework updating trip points in the int340x thermal driver so that
     it does not access thermal zone internals directly (Rafael
     Wysocki)

   - Use param_get_byte() instead of param_get_int() as the max_idle
     module parameter .get() callback in the Intel powerclamp thermal
     driver to avoid possible out-of-bounds access (David Arcari)

   - Add workload hints support to the int340x thermal driver (Srinivas
     Pandruvada)

   - Add support for Mediatek LVTS MT8192 along with suspend/resume
     routines (Balsam Chihi)

   - Fix probe for THERMAL_V2 in the Mediatek LVTS driver (Markus
     Schneider-Pargmann)

   - Remove duplicate error message from the max76620 driver when
     thermal_of_zone_register() fails (Thierry Reding)

   - Add i.MX7D compatible bindings to fix a warning from dtbs_check for
     the imx6ul platform (Alexander Stein)

   - Add sa8775p compatible to the QCom tsens driver (Priyansh Jain)

   - Fix error check in lvts_debugfs_init() to be against PTR_ERR() in
     the LVTS Mediatek driver (Minjie Du)

   - Remove unused variable in thermal/tools (Kuan-Wei Chiu)

   - Document the imx8dl thermal sensor (Fabio Estevam)

   - Add variable names in callback prototypes to prevent warning from
     checkpatch.pl in the imx8mm driver (Bragatheswaran Manickavel)

   - Add missing unevaluatedProperties on child node schemas for
     tegra124 (Rob Herring)

   - Add mt7988 support to the Mediatek LVTS driver (Frank Wunderlich)"

* tag 'thermal-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (111 commits)
  thermal: ACPI: Include the right header file
  thermal: core: Don't update trip points inside the hysteresis range
  thermal: core: Pass trip pointer to governor throttle callback
  thermal: gov_step_wise: Fold update_passive_instance() into its caller
  thermal: gov_power_allocator: Use trip pointers instead of trip indices
  thermal: gov_fair_share: Rearrange get_trip_level()
  thermal: trip: Define for_each_trip() macro
  thermal: trip: Simplify computing trip indices
  thermal/qcom/tsens: Drop ops_v0_1
  thermal/drivers/mediatek/lvts_thermal: Update calibration data documentation
  thermal/drivers/mediatek/lvts_thermal: Add mt8192 support
  thermal/drivers/mediatek/lvts_thermal: Add suspend and resume
  dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for mt8192
  thermal/drivers/mediatek: Fix probe for THERMAL_V2
  thermal/drivers/max77620: Remove duplicate error message
  dt-bindings: timer: add imx7d compatible
  dt-bindings: net: microchip: Allow nvmem-cell usage
  dt-bindings: imx-thermal: Add #thermal-sensor-cells property
  dt-bindings: thermal: tsens: Add sa8775p compatible
  thermal/drivers/mediatek/lvts_thermal: Fix error check in lvts_debugfs_init()
  ...

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Support usec resolution of TCP timestamps, enabled selectively by a
     route attribute.

   - Defer regular TCP ACK while processing socket backlog, try to send
     a cumulative ACK at the end. Increase single TCP flow performance
     on a 200Gbit NIC by 20% (100Gbit -> 120Gbit).

   - The Fair Queuing (FQ) packet scheduler:
       - add built-in 3 band prio / WRR scheduling
       - support bypass if the qdisc is mostly idle (5% speed up for TCP RR)
       - improve inactive flow reporting
       - optimize the layout of structures for better cache locality

   - Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern
     replacement for the old MD5 option.

   - Add more retransmission timeout (RTO) related statistics to
     TCP_INFO.

   - Support sending fragmented skbs over vsock sockets.

   - Make sure we send SIGPIPE for vsock sockets if socket was
     shutdown().

   - Add sysctl for ignoring lower limit on lifetime in Router
     Advertisement PIO, based on an in-progress IETF draft.

   - Add sysctl to control activation of TCP ping-pong mode.

   - Add sysctl to make connection timeout in MPTCP configurable.

   - Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps
     limit the number of wakeups.

   - Support netlink GET for MDB (multicast forwarding), allowing user
     space to request a single MDB entry instead of dumping the entire
     table.

   - Support selective FDB flushing in the VXLAN tunnel driver.

   - Allow limiting learned FDB entries in bridges, prevent OOM attacks.

   - Allow controlling via configfs netconsole targets which were
     created via the kernel cmdline at boot, rather than via configfs at
     runtime.

   - Support multiple PTP timestamp event queue readers with different
     filters.

   - MCTP over I3C.

  BPF:

   - Add new veth-like netdevice where BPF program defines the logic of
     the xmit routine. It can operate in L3 and L2 mode.

   - Support exceptions - allow asserting conditions which should never
     be true but are hard for the verifier to infer. With some extra
     flexibility around handling of the exit / failure:

          https://lwn.net/Articles/938435/

   - Add support for local per-cpu kptr, allow allocating and storing
     per-cpu objects in maps. Access to those objects operates on the
     value for the current CPU.

     This allows to deprecate local one-off implementations of per-CPU
     storage like BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps.

   - Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is
     for systemd to re-implement the LogNamespace feature which allows
     running multiple instances of systemd-journald to process the logs
     of different services.

   - Enable open-coded task_vma iteration, after maple tree conversion
     made it hard to directly walk VMAs in tracing programs.

   - Add open-coded task, css_task and css iterator support. One of the
     use cases is customizable OOM victim selection via BPF.

   - Allow source address selection with bpf_*_fib_lookup().

   - Add ability to pin BPF timer to the current CPU.

   - Prevent creation of infinite loops by combining tail calls and
     fentry/fexit programs.

   - Add missed stats for kprobes to retrieve the number of missed
     kprobe executions and subsequent executions of BPF programs.

   - Inherit system settings for CPU security mitigations.

   - Add BPF v4 CPU instruction support for arm32 and s390x.

  Changes to common code:

   - overflow: add DEFINE_FLEX() for on-stack definition of structs with
     flexible array members.

   - Process doc update with more guidance for reviewers.

  Driver API:

   - Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy
     mutex in most places and remove a lot of smaller locks.

   - Create a common DPLL configuration API. Allow configuring and
     querying state of PLL circuits used for clock syntonization, in
     network time distribution.

   - Unify fragmented and full page allocation APIs in page pool code.
     Let drivers be ignorant of PAGE_SIZE.

   - Rework PHY state machine to avoid races with calls to phy_stop().

   - Notify DSA drivers of MAC address changes on user ports, improve
     correctness of offloads which depend on matching port MAC
     addresses.

   - Allow antenna control on injected WiFi frames.

   - Reduce the number of variants of napi_schedule().

   - Simplify error handling when composing devlink health messages.

  Misc:

   - A lot of KCSAN data race "fixes", from Eric.

   - A lot of __counted_by() annotations, from Kees.

   - A lot of strncpy -> strscpy and printf format fixes.

   - Replace master/slave terminology with conduit/user in DSA drivers.

   - Handful of KUnit tests for netdev and WiFi core.

  Removed:

   - AppleTalk COPS.

   - AppleTalk ipddp.

   - TI AR7 CPMAC Ethernet driver.

  Drivers:

   - Ethernet high-speed NICs:
      - Intel (100G, ice, idpf):
         - add a driver for the Intel E2000 IPUs
         - make CRC/FCS stripping configurable
         - cross-timestamping for E823 devices
         - basic support for E830 devices
         - use aux-bus for managing client drivers
         - i40e: report firmware versions via devlink
      - nVidia/Mellanox:
         - support 4-port NICs
         - increase max number of channels to 256
         - optimize / parallelize SF creation flow
      - Broadcom (bnxt):
         - enhance NIC temperature reporting
         - support PAM4 speeds and lane configuration
      - Marvell OcteonTX2:
         - PTP pulse-per-second output support
         - enable hardware timestamping for VFs
      - Solarflare/AMD:
         - conntrack NAT offload and offload for tunnels
      - Wangxun (ngbe/txgbe):
         - expose HW statistics
      - Pensando/AMD:
         - support PCI level reset
         - narrow down the condition under which skbs are linearized
      - Netronome/Corigine (nfp):
         - support CHACHA20-POLY1305 crypto in IPsec offload

   - Ethernet NICs embedded, slower, virtual:
      - Synopsys (stmmac):
         - add Loongson-1 SoC support
         - enable use of HW queues with no offload capabilities
         - enable PPS input support on all 5 channels
         - increase TX coalesce timer to 5ms
      - RealTek USB (r8152): improve efficiency of Rx by using GRO frags
      - xen: support SW packet timestamping
      - add drivers for implementations based on TI's PRUSS (AM64x EVM)

   - nVidia/Mellanox Ethernet datacenter switches:
      - avoid poor HW resource use on Spectrum-4 by better block
        selection for IPv6 multicast forwarding and ordering of blocks
        in ACL region

   - Ethernet embedded switches:
      - Microchip:
         - support configuring the drive strength for EMI compliance
         - ksz9477: partial ACL support
         - ksz9477: HSR offload
         - ksz9477: Wake on LAN
      - Realtek:
         - rtl8366rb: respect device tree config of the CPU port

   - Ethernet PHYs:
      - support Broadcom BCM5221 PHYs
      - TI dp83867: support hardware LED blinking

   - CAN:
      - add support for Linux-PHY based CAN transceivers
      - at91_can: clean up and use rx-offload helpers

   - WiFi:
      - MediaTek (mt76):
         - new sub-driver for mt7925 USB/PCIe devices
         - HW wireless <> Ethernet bridging in MT7988 chips
         - mt7603/mt7628 stability improvements
      - Qualcomm (ath12k):
         - WCN7850:
            - enable 320 MHz channels in 6 GHz band
            - hardware rfkill support
            - enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to
              make scan faster
            - read board data variant name from SMBIOS
        - QCN9274: mesh support
      - RealTek (rtw89):
         - TDMA-based multi-channel concurrency (MCC)
      - Silicon Labs (wfx):
         - Remain-On-Channel (ROC) support

   - Bluetooth:
      - ISO: many improvements for broadcast support
      - mark BCM4378/BCM4387 as BROKEN_LE_CODED
      - add support for QCA2066
      - btmtksdio: enable Bluetooth wakeup from suspend"

* tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1816 commits)
  net: pcs: xpcs: Add 2500BASE-X case in get state for XPCS drivers
  net: bpf: Use sockopt_lock_sock() in ip_sock_set_tos()
  net: mana: Use xdp_set_features_flag instead of direct assignment
  vxlan: Cleanup IFLA_VXLAN_PORT_RANGE entry in vxlan_get_size()
  iavf: delete the iavf client interface
  iavf: add a common function for undoing the interrupt scheme
  iavf: use unregister_netdev
  iavf: rely on netdev's own registered state
  iavf: fix the waiting time for initial reset
  iavf: in iavf_down, don't queue watchdog_task if comms failed
  iavf: simplify mutex_trylock+sleep loops
  iavf: fix comments about old bit locks
  doc/netlink: Update schema to support cmd-cnt-name and cmd-max-name
  tools: ynl: introduce option to process unknown attributes or types
  ipvlan: properly track tx_errors
  netdevsim: Block until all devices are released
  nfp: using napi_build_skb() to replace build_skb()
  net: dsa: microchip: ksz9477: Fix spelling mistake "Enery" -> "Energy"
  net: dsa: microchip: Ensure Stable PME Pin State for Wake-on-LAN
  net: dsa: microchip: Refactor switch shutdown routine for WoL preparation
  ...

Pull cgroup updates from Tejun Heo:

 - cpuset now supports remote partitions where CPUs can be reserved for
   exclusive use down the tree without requiring all the intermediate
   nodes to be partitions. This makes it easier to use partitions
   without modifying existing cgroup hierarchy.

 - cpuset partition configuration behavior improvement

 - cgroup_favordynmods= boot param added to allow setting the flag on
   boot on cgroup1

 - Misc code and doc updates

* tag 'cgroup-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  docs/cgroup: Add the list of threaded controllers to cgroup-v2.rst
  cgroup: use legacy_name for cgroup v1 disable info
  cgroup/cpuset: Cleanup signedness issue in cpu_exclusive_check()
  cgroup/cpuset: Enable invalid to valid local partition transition
  cgroup: add cgroup_favordynmods= command-line option
  cgroup/cpuset: Extend test_cpuset_prs.sh to test remote partition
  cgroup/cpuset: Documentation update for partition
  cgroup/cpuset: Check partition conflict with housekeeping setup
  cgroup/cpuset: Introduce remote partition
  cgroup/cpuset: Add cpuset.cpus.exclusive for v2
  cgroup/cpuset: Add cpuset.cpus.exclusive.effective for v2
  cgroup/cpuset: Fix load balance state in update_partition_sd_lb()
  cgroup: Avoid extra dereference in css_populate_dir()
  cgroup: Check for ret during cgroup1_base_files cft addition

Pull workqueue update from Tejun Heo:
 "Just one commit to improve lockdep annotation for work_on_cpu() to
  avoid spurious warnings"

* tag 'wq-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Provide one lock class key per work_on_cpu() callsite

Pull workqueue rust bindings from Tejun Heo:
 "Add rust bindings to allow rust code to schedule work items on
  workqueues.

  While the current bindings don't cover all of the workqueue API, it
  provides enough for basic usage and can be expanded as needed"

* tag 'wq-for-6.7-rust-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  rust: workqueue: add examples
  rust: workqueue: add `try_spawn` helper method
  rust: workqueue: implement `WorkItemPointer` for pointer types
  rust: workqueue: add helper for defining work_struct fields
  rust: workqueue: define built-in queues
  rust: workqueue: add low-level workqueue bindings
  rust: sync: add `Arc::{from_raw, into_raw}`

Pull rust updates from Miguel Ojeda:
 "A small one compared to the previous one in terms of features. In
  terms of lines, as usual, the 'alloc' version upgrade accounts for
  most of them.

  Toolchain and infrastructure:

   - Upgrade to Rust 1.73.0

     This time around, due to how the kernel and Rust schedules have
     aligned, there are two upgrades in fact. They contain the fixes for
     a few issues we reported to the Rust project.

     In addition, a few cleanups indicated by the upgraded compiler or
     possible thanks to it. For instance, the compiler now detects
     redundant explicit links.

   - A couple changes to the Rust 'Makefile' so that it can be used with
     toybox tools, allowing Rust to be used in the Android kernel build.

  x86:

   - Enable IBT if enabled in C

  Documentation:

   - Add "The Rust experiment" section to the Rust index page

  MAINTAINERS:

   - Add Maintainer Entry Profile field ('P:').

   - Update our 'W:' field to point to the webpage we have been building
     this year"

* tag 'rust-6.7' of https://github.com/Rust-for-Linux/linux:
  docs: rust: add "The Rust experiment" section
  x86: Enable IBT in Rust if enabled in C
  rust: Use grep -Ev rather than relying on GNU grep
  rust: Use awk instead of recent xargs
  rust: upgrade to Rust 1.73.0
  rust: print: use explicit link in documentation
  rust: task: remove redundant explicit link
  rust: kernel: remove `#[allow(clippy::new_ret_no_self)]`
  MAINTAINERS: add Maintainer Entry Profile field for Rust
  MAINTAINERS: update Rust webpage
  rust: upgrade to Rust 1.72.1
  rust: arc: add explicit `drop()` around `Box::from_raw()`

Pull LSM updates from Paul Moore:

 - Add new credential functions, get_cred_many() and put_cred_many() to
   save some atomic_t operations for a few operations.

   While not strictly LSM related, this patchset had been rotting on the
   mailing lists for some time and since the LSMs do care a lot about
   credentials I thought it reasonable to give this patch a home.

 - Five patches to constify different LSM hook parameters.

 - Fix a spelling mistake.

* tag 'lsm-pr-20231030' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  lsm: fix a spelling mistake
  cred: add get_cred_many and put_cred_many
  lsm: constify 'sb' parameter in security_sb_kern_mount()
  lsm: constify 'bprm' parameter in security_bprm_committed_creds()
  lsm: constify 'bprm' parameter in security_bprm_committing_creds()
  lsm: constify 'file' parameter in security_bprm_creds_from_file()
  lsm: constify 'sb' parameter in security_quotactl()

Pull selinux updates from Paul Moore:

 - improve the SELinux debugging configuration controls in Kconfig

 - print additional information about the hash table chain lengths when
   when printing SELinux debugging information

 - simplify the SELinux access vector hash table calcaulations

 - use a better hashing function for the SELinux role tansition hash
   table

 - improve SELinux load policy time through the use of optimized
   functions for calculating the number of bits set in a field

 - addition of a __counted_by annotation

 - simplify the avtab_inert_node() function through a simplified
   prototype

* tag 'selinux-pr-20231030' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: simplify avtab_insert_node() prototype
  selinux: hweight optimization in avtab_read_item
  selinux: improve role transition hashing
  selinux: simplify avtab slot calculation
  selinux: improve debug configuration
  selinux: print sum of chain lengths^2 for hash tables
  selinux: Annotate struct sidtab_str_cache with __counted_by

Pull audit update from Paul Moore:
 "Only two audit patches for v6.7, both fairly small with a combined 11
  lines of changes.

  The first patch is a simple __counted_by annontation, and the second
  fixes a a problem where audit could deadlock on task_lock() when an
  exe filter is configured. More information is available in the commit
  description and the patch is tagged for stable"

* tag 'audit-pr-20231030' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: don't take task_lock() in audit_exe_compare() code path
  audit: Annotate struct audit_chunk with __counted_by

Pull tpm updates from Jarkko Sakkinen:
 "This is a small sized pull request. One commit I would like to
  pinpoint is my fix for init_trusted() rollback, as for actual patch I
  did not receive any feedback"

* tag 'tpmdd-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  keys: Remove unused extern declarations
  integrity: powerpc: Do not select CA_MACHINE_KEYRING
  KEYS: trusted: tee: Refactor register SHM usage
  KEYS: trusted: Rollback init_trusted() consistently

Pull execve updates from Kees Cook:

 - Support non-BSS ELF segments with zero filesz

   Eric Biederman and I refactored ELF segment loading to handle the
   case where a segment has a smaller filesz than memsz. Traditionally
   linkers only did this for .bss and it was always the last segment. As
   a result, the kernel only handled this case when it was the last
   segment. We've had two recent cases where linkers were trying to use
   these kinds of segments for other reasons, and the were in the middle
   of the segment list. There was no good reason for the kernel not to
   support this, and the refactor actually ends up making things more
   readable too.

 - Enable namespaced binfmt_misc

   Christian Brauner has made it possible to use binfmt_misc with mount
   namespaces. This means some traditionally root-only interfaces (for
   adding/removing formats) are now more exposed (but believed to be
   safe).

 - Remove struct tag 'dynamic' from ELF UAPI

   Alejandro Colomar noticed that the ELF UAPI has been polluting the
   struct namespace with an unused and overly generic tag named
   "dynamic" for no discernible reason for many many years. After
   double-checking various distro source repositories, it has been
   removed.

 - Clean up binfmt_elf_fdpic debug output (Greg Ungerer)

* tag 'execve-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  binfmt_misc: enable sandboxed mounts
  binfmt_misc: cleanup on filesystem umount
  binfmt_elf_fdpic: clean up debug warnings
  mm: Remove unused vm_brk()
  binfmt_elf: Only report padzero() errors when PROT_WRITE
  binfmt_elf: Use elf_load() for library
  binfmt_elf: Use elf_load() for interpreter
  binfmt_elf: elf_bss no longer used by load_elf_binary()
  binfmt_elf: Support segments with 0 filesz and misaligned starts
  elf, uapi: Remove struct tag 'dynamic'

Pull pstore updates from Kees Cook:

 - Check for out-of-memory condition during initialization (Jiasheng
   Jiang)

 - Fix documentation typos (Tudor Ambarus)

* tag 'pstore-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore/platform: Add check for kstrdup
  docs: pstore-blk.rst: fix typo, s/console/ftrace
  docs: pstore-blk.rst: use "about" as a preposition after "care"

Pull hardening updates from Kees Cook:
 "One of the more voluminous set of changes is for adding the new
  __counted_by annotation[1] to gain run-time bounds checking of
  dynamically sized arrays with UBSan.

   - Add LKDTM test for stuck CPUs (Mark Rutland)

   - Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo)

   - Refactor more 1-element arrays into flexible arrays (Gustavo A. R.
     Silva)

   - Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem
     Shaikh)

   - Convert group_info.usage to refcount_t (Elena Reshetova)

   - Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva)

   - Add Kconfig fragment for basic hardening options (Kees Cook, Lukas
     Bulwahn)

   - Fix randstruct GCC plugin performance mode to stay in groups (Kees
     Cook)

   - Fix strtomem() compile-time check for small sources (Kees Cook)"

* tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (56 commits)
  hwmon: (acpi_power_meter) replace open-coded kmemdup_nul
  reset: Annotate struct reset_control_array with __counted_by
  kexec: Annotate struct crash_mem with __counted_by
  virtio_console: Annotate struct port_buffer with __counted_by
  ima: Add __counted_by for struct modsig and use struct_size()
  MAINTAINERS: Include stackleak paths in hardening entry
  string: Adjust strtomem() logic to allow for smaller sources
  hardening: x86: drop reference to removed config AMD_IOMMU_V2
  randstruct: Fix gcc-plugin performance mode to stay in group
  mailbox: zynqmp: Annotate struct zynqmp_ipi_pdata with __counted_by
  drivers: thermal: tsens: Annotate struct tsens_priv with __counted_by
  irqchip/imx-intmux: Annotate struct intmux_data with __counted_by
  KVM: Annotate struct kvm_irq_routing_table with __counted_by
  virt: acrn: Annotate struct vm_memory_region_batch with __counted_by
  hwmon: Annotate struct gsc_hwmon_platform_data with __counted_by
  sparc: Annotate struct cpuinfo_tree with __counted_by
  isdn: kcapi: replace deprecated strncpy with strscpy_pad
  isdn: replace deprecated strncpy with strscpy
  NFS/flexfiles: Annotate struct nfs4_ff_layout_segment with __counted_by
  nfs41: Annotate struct nfs4_file_layout_dsaddr with __counted_by
  ...

Pull slab updates from Vlastimil Babka:

 - SLUB: slab order calculation refactoring (Vlastimil Babka, Feng Tang)

   Recent proposals to tune the slab order calculations have prompted us
   to look at the current code and refactor it to make it easier to
   follow and eliminate some odd corner cases.

   The refactoring is mostly non-functional changes, but should make the
   actual tuning easier to implement and review.

* tag 'slab-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  mm/slub: refactor calculate_order() and calc_slab_order()
  mm/slub: attempt to find layouts up to 1/2 waste in calculate_order()
  mm/slub: remove min_objects loop from calculate_order()
  mm/slub: simplify the last resort slab order calculation
  mm/slub: add sanity check for slub_min/max_order cmdline setup

Pull RCU updates from Frederic Weisbecker:

 - RCU torture, locktorture and generic torture infrastructure updates
   that include various fixes, cleanups and consolidations.

   Among the user visible things, ftrace dumps can now be found into
   their own file, and module parameters get better documented and
   reported on dumps.

 - Generic and misc fixes all over the place. Some highlights:

     * Hotplug handling has seen some light cleanups and comments

     * An RCU barrier can now be triggered through sysfs to serialize
       memory stress testing and avoid OOM

     * Object information is now dumped in case of invalid callback
       invocation

     * Also various SRCU issues, too hard to trigger to deserve urgent
       pull requests, have been fixed

 - RCU documentation updates

 - RCU reference scalability test minor fixes and doc improvements.

 - RCU tasks minor fixes

 - Stall detection updates. Introduce RCU CPU Stall notifiers that
   allows a subsystem to provide informations to help debugging. Also
   cure some false positive stalls.

* tag 'rcu-next-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks: (56 commits)
  srcu: Only accelerate on enqueue time
  locktorture: Check the correct variable for allocation failure
  srcu: Fix callbacks acceleration mishandling
  rcu: Comment why callbacks migration can't wait for CPUHP_RCUTREE_PREP
  rcu: Standardize explicit CPU-hotplug calls
  rcu: Conditionally build CPU-hotplug teardown callbacks
  rcu: Remove references to rcu_migrate_callbacks() from diagrams
  rcu: Assume rcu_report_dead() is always called locally
  rcu: Assume IRQS disabled from rcu_report_dead()
  rcu: Use rcu_segcblist_segempty() instead of open coding it
  rcu: kmemleak: Ignore kmemleak false positives when RCU-freeing objects
  srcu: Fix srcu_struct node grpmask overflow on 64-bit systems
  torture: Convert parse-console.sh to mktemp
  rcutorture: Traverse possible cpu to set maxcpu in rcu_nocb_toggle()
  rcutorture: Replace schedule_timeout*() 1-jiffy waits with HZ/20
  torture: Add kvm.sh --debug-info argument
  locktorture: Rename readers_bind/writers_bind to bind_readers/bind_writers
  doc: Catch-up update for locktorture module parameters
  locktorture: Add call_rcu_chains module parameter
  locktorture: Add new module parameters to lock_torture_print_module_parms()
  ...

Pull CSD lock update from Paul McKenney:
 "This adds a kernel boot parameter that causes the kernel to panic if
  one of the call_smp_function() APIs is stalled for more than the
  specified duration.

  This is useful in deployments in which a clean panic is preferable to
  an indefinite stall"

* tag 'csd-lock.2023.10.23a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  smp,csd: Throw an error if a CSD lock is stuck for too long

Pull Linux Kernel Memory Model updates from Paul McKenney:
 "This update adds paragraphs to the portions of memory-barriers.txt
  that have been marked historical due to changes in the way that the
  Linux kernel handles DEC Alpha. These paragraphs includes information
  on where to find the corresponding up-to-date information"

* tag 'lkmm.2023.10.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  docs: memory-barriers: Add note on compiler transformation and address deps

Pull nolibc updates from Paul McKenney:

 - Add stdarg.h header and a few additional system-call upgrades

 - Add support for constructors and destructors

 - Add tests to verify the ability to link multiple .o files against
   nolibc

 - Numerous string-function optimizations and improvements

 - Prevent redundant kernel relinks by avoiding embedding of initramfs
   into the kernel image

 - Allow building i386 with multiarch compiler and make ppc64le use
   qemu-system-ppc64

 - Miscellaneous fixups, including addition of -nostdinc for
   nolibc-test, avoiding -Wstringop-overflow warnings, and avoiding
   unused parameter warnings for ENOSYS fallbacks

* tag 'nolibc.2023.10.23a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  selftests/nolibc: add tests for multi-object linkage
  selftests/nolibc: use qemu-system-ppc64 for ppc64le
  tools/nolibc: add support for constructors and destructors
  tools/nolibc: drop test for getauxval(AT_PAGESZ)
  tools/nolibc: automatically detect necessity to use pselect6
  tools/nolibc: don't define new syscall number
  tools/nolibc: avoid unused parameter warnings for ENOSYS fallbacks
  selftests/nolibc: allow building i386 with multiarch compiler
  selftests/nolibc: don't embed initramfs into kernel image
  selftests/nolibc: libc-test: avoid -Wstringop-overflow warnings
  tools/nolibc: string: Remove the `_nolibc_memcpy_up()` function
  tools/nolibc: string: Remove the `_nolibc_memcpy_down()` function
  tools/nolibc: x86-64: Use `rep stosb` for `memset()`
  tools/nolibc: x86-64: Use `rep movsb` for `memcpy()` and `memmove()`
  selftests/nolibc: use -nostdinc for nolibc-test
  tools/nolibc: add stdarg.h header

Pull x86 core updates from Thomas Gleixner:

 - Limit the hardcoded topology quirk for Hygon CPUs to those which have
   a model ID less than 4.

   The newer models have the topology CPUID leaf 0xB correctly
   implemented and are not affected.

 - Make SMT control more robust against enumeration failures

   SMT control was added to allow controlling SMT at boottime or
   runtime. The primary purpose was to provide a simple mechanism to
   disable SMT in the light of speculation attack vectors.

   It turned out that the code is sensible to enumeration failures and
   worked only by chance for XEN/PV. XEN/PV has no real APIC enumeration
   which means the primary thread mask is not set up correctly. By
   chance a XEN/PV boot ends up with smp_num_siblings == 2, which makes
   the hotplug control stay at its default value "enabled". So the mask
   is never evaluated.

   The ongoing rework of the topology evaluation caused XEN/PV to end up
   with smp_num_siblings == 1, which sets the SMT control to "not
   supported" and the empty primary thread mask causes the hotplug core
   to deny the bringup of the APS.

   Make the decision logic more robust and take 'not supported' and 'not
   implemented' into account for the decision whether a CPU should be
   booted or not.

 - Fake primary thread mask for XEN/PV

   Pretend that all XEN/PV vCPUs are primary threads, which makes the
   usage of the primary thread mask valid on XEN/PV. That is consistent
   with because all of the topology information on XEN/PV is fake or
   even non-existent.

 - Encapsulate topology information in cpuinfo_x86

   Move the randomly scattered topology data into a separate data
   structure for readability and as a preparatory step for the topology
   evaluation overhaul.

 - Consolidate APIC ID data type to u32

   It's fixed width hardware data and not randomly u16, int, unsigned
   long or whatever developers decided to use.

 - Cure the abuse of cpuinfo for persisting logical IDs.

   Per CPU cpuinfo is used to persist the logical package and die IDs.
   That's really not the right place simply because cpuinfo is subject
   to be reinitialized when a CPU goes through an offline/online cycle.

   Use separate per CPU data for the persisting to enable the further
   topology management rework. It will be removed once the new topology
   management is in place.

 - Provide a debug interface for inspecting topology information

   Useful in general and extremly helpful for validating the topology
   management rework in terms of correctness or "bug" compatibility.

* tag 'x86-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  x86/apic, x86/hyperv: Use u32 in hv_snp_boot_ap() too
  x86/cpu: Provide debug interface
  x86/cpu/topology: Cure the abuse of cpuinfo for persisting logical ids
  x86/apic: Use u32 for wakeup_secondary_cpu[_64]()
  x86/apic: Use u32 for [gs]et_apic_id()
  x86/apic: Use u32 for phys_pkg_id()
  x86/apic: Use u32 for cpu_present_to_apicid()
  x86/apic: Use u32 for check_apicid_used()
  x86/apic: Use u32 for APIC IDs in global data
  x86/apic: Use BAD_APICID consistently
  x86/cpu: Move cpu_l[l2]c_id into topology info
  x86/cpu: Move logical package and die IDs into topology info
  x86/cpu: Remove pointless evaluation of x86_coreid_bits
  x86/cpu: Move cu_id into topology info
  x86/cpu: Move cpu_core_id into topology info
  hwmon: (fam15h_power) Use topology_core_id()
  scsi: lpfc: Use topology_core_id()
  x86/cpu: Move cpu_die_id into topology info
  x86/cpu: Move phys_proc_id into topology info
  x86/cpu: Encapsulate topology information in cpuinfo_x86
  ...

Pull x86 APIC updates from Thomas Gleixner:

 - Make the quirk for non-maskable MSI interrupts in the affinity setter
   functional again.

   It was broken by a MSI core code update, which restructured the code
   in a way that the quirk flag was not longer set correctly.

   Trying to restore the core logic caused a deeper inspection and it
   turned out that the extra quirk flag is not required at all because
   it's the inverse of the reservation mode bit, which only can be set
   when the MSI interrupt is maskable.

   So the trivial fix is to use the reservation mode check in the
   affinity setter function and remove almost 40 lines of code related
   to the no-mask quirk flag.

 - Cure a Kconfig dependency issue which causes compile failures by
   correcting the conditionals in the affected header files.

 - Clean up coding style in the UV APIC driver.

* tag 'x86-apic-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic/msi: Fix misconfigured non-maskable MSI quirk
  x86/msi: Fix compile error caused by CONFIG_GENERIC_MSI_IRQ=y && !CONFIG_X86_LOCAL_APIC
  x86/platform/uv/apic: Clean up inconsistent indenting

Pull timer updates from Thomas Gleixner:
 "Updates for time, timekeeping and timers:

  Core:

   - Avoid superfluous deactivation of the tick in the low resolution
     tick NOHZ interrupt handler as the deactivation is handled already
     in the idle loop and on interrupt exit.

   - Update stale comments in the tick NOHZ code and rename the tick
     handler functions to be self-explanatory.

   - Remove an unused function in the tick NOHZ code, which was
     forgotten when the last user went away.

   - Handle RTC alarms which exceed the maximum alarm time of the
     underlying RTC hardware gracefully.

     Setting RTC alarms which exceed the maximum alarm time of the RTC
     hardware failed so far and caused suspend operations to abort.

     Cure this by limiting the alarm to the maximum alarm time of the
     RTC hardware, which is provided by the driver. This causes early
     resume wakeups, but that's way better than not suspending at all.

  Drivers:

   - Add a proper clocksource/event driver for the ancient Cirrus Logic
     EP93xx SoC family, which is one of the last non device-tree
     holdouts in arch/arm.

   - The usual boring device tree bindings updates and small fixes and
     enhancements all over the place"

* tag 'timers-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource: ep93xx: Add driver for Cirrus Logic EP93xx
  dt-bindings: timers: Add Cirrus EP93xx
  clocksource/drivers/timer-atmel-tcb: Fix initialization on SAM9 hardware
  clocksource/timer-riscv: ACPI: Add timer_cannot_wakeup_cpu
  clocksource/drivers/sun5i: Remove surplus dev_err() when using platform_get_irq()
  drivers/clocksource/timer-ti-dm: Don't call clk_get_rate() in stop function
  clocksource/drivers/timer-imx-gpt: Fix potential memory leak
  dt-bindings: timer: renesas,rz-mtu3: Document RZ/{G2UL,Five} SoCs
  dt-bindings: timer: renesas,rz-mtu3: Improve documentation
  dt-bindings: timer: renesas,rz-mtu3: Fix overflow/underflow interrupt names
  alarmtimer: Use maximum alarm time for suspend
  rtc: Add API function to return alarm time bound by hardware limit
  tick/nohz: Update comments some more
  tick/nohz: Remove unused tick_nohz_idle_stop_tick_protected()
  tick/nohz: Don't shutdown the lowres tick from itself
  tick/nohz: Update obsolete comments
  tick/nohz: Rename the tick handlers to more self-explanatory names

Pull SMP and CPU hotplug updates from Thomas Gleixner:

 - Switch the smp_call_function*() @csd argument to call_single_data_t
   type, which is a cache-line aligned typedef of the underlying struct
   __call_single_data.

   This ensures that the call data is not crossing a cacheline which
   avoids bouncing an extra cache-line for the SMP function call

 - Prevent offlining of the last housekeeping CPU when CPU isolation is
   active.

   Offlining the last housekeeping CPU makes no sense in general, but
   also caused the scheduler to panic due to the empty CPU mask when
   rebuilding the scheduler domains.

 - Remove an unused CPU hotplug state

* tag 'smp-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Don't offline the last non-isolated CPU
  cpu/hotplug: Remove unused cpuhp_state CPUHP_AP_X86_VDSO_VMA_ONLINE
  smp: Change function signatures to use call_single_data_t

Pull irq updates from Thomas Gleixner:
 "Core:

   - Exclude managed interrupts in the calculation of interrupts which
     are targeted to a CPU which is about to be offlined to ensure that
     there are enough free vectors on the still online CPUs to migrate
     them over.

     Managed interrupts do not need to be accounted because they are
     either shut down on offline or migrated to an already reserved and
     guaranteed slot on a still online CPU in the interrupts affinity
     mask.

     Including managed interrupts is overaccounting and can result in
     needlessly aborting hibernation on large server machines.

   - The usual set of small improvements

  Drivers:

   - Make the generic interrupt chip implementation handle interrupt
     domains correctly and initialize the name pointers correctly

   - Add interrupt affinity setting support to the Renesas RZG2L chip
     driver.

   - Prevent registering syscore operations multiple times in the SiFive
     PLIC chip driver.

   - Update device tree handling in the NXP Layerscape MSI chip driver"

* tag 'irq-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/sifive-plic: Fix syscore registration for multi-socket systems
  irqchip/ls-scfg-msi: Use device_get_match_data()
  genirq/generic_chip: Make irq_remove_generic_chip() irqdomain aware
  genirq/matrix: Exclude managed interrupts in irq_matrix_allocated()
  PCI/MSI: Provide stubs for IMS functions
  irqchip/renesas-rzg2l: Enhance driver to support interrupt affinity setting
  genirq/generic-chip: Fix the irq_chip name for /proc/interrupts
  irqdomain: Annotate struct irq_domain with __counted_by

Pull core updates from Thomas Gleixner:
 "Two small updates to ptrace_stop():

   - Add a comment to explain that the preempt_disable() before
     unlocking tasklist lock is not a correctness problem and just
     avoids the tracer to preempt the tracee before the tracee schedules
     out.

   - Make that preempt_disable() conditional on PREEMPT_RT=n.

     RT enabled kernels cannot disable preemption at this point because
     cgroup_enter_frozen() and sched_submit_work() acquire spinlocks or
     rwlocks which are substituted by sleeping locks on RT. Acquiring a
     sleeping lock in a preemption disable region is obviously not
     possible.

     This obviously brings back the potential slowdown of ptrace() for
     RT enabled kernels, but that's a price to be paid for latency
     guarantees"

* tag 'core-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  signal: Don't disable preemption in ptrace_stop() on PREEMPT_RT
  signal: Add a proper comment about preempt_disable() in ptrace_stop()

Pull x86 build update from Ingo Molnar:
 "Enable CONFIG_DEBUG_ENTRY=y in the x86 defconfigs"

* tag 'x86-build-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/defconfig: Enable CONFIG_DEBUG_ENTRY=y

Pull x86 mm handling updates from Ingo Molnar:

 - Add new NX-stack self-test

 - Improve NUMA partial-CFMWS handling

 - Fix #VC handler bugs resulting in SEV-SNP boot failures

 - Drop the 4MB memory size restriction on minimal NUMA nodes

 - Reorganize headers a bit, in preparation to header dependency
   reduction efforts

 - Misc cleanups & fixes

* tag 'x86-mm-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Drop the 4 MB restriction on minimal NUMA node memory size
  selftests/x86/lam: Zero out buffer for readlink()
  x86/sev: Drop unneeded #include
  x86/sev: Move sev_setup_arch() to mem_encrypt.c
  x86/tdx: Replace deprecated strncpy() with strtomem_pad()
  selftests/x86/mm: Add new test that userspace stack is in fact NX
  x86/sev: Make boot_ghcb_page[] static
  x86/boot: Move x86_cache_alignment initialization to correct spot
  x86/sev-es: Set x86_virt_bits to the correct value straight away, instead of a two-phase approach
  x86/sev-es: Allow copy_from_kernel_nofault() in earlier boot
  x86_64: Show CR4.PSE on auxiliaries like on BSP
  x86/iommu/docs: Update AMD IOMMU specification document URL
  x86/sev/docs: Update document URL in amd-memory-encryption.rst
  x86/mm: Move arch_memory_failure() and arch_is_platform_page() definitions from <asm/processor.h> to <asm/pgtable.h>
  ACPI/NUMA: Apply SRAT proximity domain to entire CFMWS window
  x86/numa: Introduce numa_fill_memblks()

Pull x86 irq fix from Ingo Molnar:
 "Fix out-of-order NMI nesting checks resulting in false positive
  warnings"

* tag 'x86-irq-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/nmi: Fix out-of-order NMI nesting checks & false positive warning

Pull x86 entry updates from Ingo Molnar:

 - Make IA32_EMULATION boot time configurable with
   the new ia32_emulation=<bool> boot option

 - Clean up fast syscall return validation code: convert
   it to C and refactor the code

 - As part of this, optimize the canonical RIP test code

* tag 'x86-entry-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry/32: Clean up syscall fast exit tests
  x86/entry/64: Use TASK_SIZE_MAX for canonical RIP test
  x86/entry/64: Convert SYSRET validation tests to C
  x86/entry/32: Remove SEP test for SYSEXIT
  x86/entry/32: Convert do_fast_syscall_32() to bool return type
  x86/entry/compat: Combine return value test from syscall handler
  x86/entry/64: Remove obsolete comment on tracing vs. SYSRET
  x86: Make IA32_EMULATION boot time configurable
  x86/entry: Make IA32 syscalls' availability depend on ia32_enabled()
  x86/elf: Make loading of 32bit processes depend on ia32_enabled()
  x86/entry: Compile entry_SYSCALL32_ignore() unconditionally
  x86/entry: Rename ignore_sysret()
  x86: Introduce ia32_enabled()

Pull x86 assembly code updates from Ingo Molnar:

 - Micro-optimize the x86 bitops code

 - Define target-specific {raw,this}_cpu_try_cmpxchg{64,128}() to
   improve code generation

 - Define and use raw_cpu_try_cmpxchg() preempt_count_set()

 - Do not clobber %rsi in percpu_{try_,}cmpxchg{64,128}_op

 - Remove the unused __sw_hweight64() implementation on x86-32

 - Misc fixes and cleanups

* tag 'x86-asm-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/lib: Address kernel-doc warnings
  x86/entry: Fix typos in comments
  x86/entry: Remove unused argument %rsi passed to exc_nmi()
  x86/bitops: Remove unused __sw_hweight64() assembly implementation on x86-32
  x86/percpu: Do not clobber %rsi in percpu_{try_,}cmpxchg{64,128}_op
  x86/percpu: Use raw_cpu_try_cmpxchg() in preempt_count_set()
  x86/percpu: Define raw_cpu_try_cmpxchg and this_cpu_try_cmpxchg()
  x86/percpu: Define {raw,this}_cpu_try_cmpxchg{64,128}
  x86/asm/bitops: Use __builtin_clz{l|ll} to evaluate constant expressions

Pull x86 boot updates from Ingo Molnar:

 - Rework PE header generation, primarily to generate a modern, 4k
   aligned kernel image view with narrower W^X permissions.

 - Further refine init-lifetime annotations

 - Misc cleanups & fixes

* tag 'x86-boot-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  x86/boot: efistub: Assign global boot_params variable
  x86/boot: Rename conflicting 'boot_params' pointer to 'boot_params_ptr'
  x86/head/64: Move the __head definition to <asm/init.h>
  x86/head/64: Add missing __head annotation to startup_64_load_idt()
  x86/head/64: Mark 'startup_gdt[]' and 'startup_gdt_descr' as __initdata
  x86/boot: Harmonize the style of array-type parameter for fixup_pointer() calls
  x86/boot: Fix incorrect startup_gdt_descr.size
  x86/boot: Compile boot code with -std=gnu11 too
  x86/boot: Increase section and file alignment to 4k/512
  x86/boot: Split off PE/COFF .data section
  x86/boot: Drop PE/COFF .reloc section
  x86/boot: Construct PE/COFF .text section from assembler
  x86/boot: Derive file size from _edata symbol
  x86/boot: Define setup size in linker script
  x86/boot: Set EFI handover offset directly in header asm
  x86/boot: Grab kernel_info offset from zoffset header directly
  x86/boot: Drop references to startup_64
  x86/boot: Drop redundant code setting the root device
  x86/boot: Omit compression buffer from PE/COFF image memory footprint
  x86/boot: Remove the 'bugger off' message
  ...

Pull x86 header file cleanup from Ingo Molnar:
 "Replace <asm/export.h> uses with <linux/export.h> and then remove
  <asm/export.h>"

* tag 'x86-headers-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/headers: Remove <asm/export.h>
  x86/headers: Replace #include <asm/export.h> with #include <linux/export.h>
  x86/headers: Remove unnecessary #include <asm/export.h>

Pull performance event updates from Ingo Molnar:
 - Add AMD Unified Memory Controller (UMC) events introduced with Zen 4
 - Simplify & clean up the uncore management code
 - Fall back from RDPMC to RDMSR on certain uncore PMUs
 - Improve per-package and cstate event reading
 - Extend the Intel ref-cycles event to GP counters
 - Fix Intel MTL event constraints
 - Improve the Intel hybrid CPU handling code
 - Micro-optimize the RAPL code
 - Optimize perf_cgroup_switch()
 - Improve large AUX area error handling
 - Misc fixes and cleanups

* tag 'perf-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
  perf/x86/amd/uncore: Pass through error code for initialization failures, instead of -ENODEV
  perf/x86/amd/uncore: Fix uninitialized return value in amd_uncore_init()
  x86/cpu: Fix the AMD Fam 17h, Fam 19h, Zen2 and Zen4 MSR enumerations
  perf: Optimize perf_cgroup_switch()
  perf/x86/amd/uncore: Add memory controller support
  perf/x86/amd/uncore: Add group exclusivity
  perf/x86/amd/uncore: Use rdmsr if rdpmc is unavailable
  perf/x86/amd/uncore: Move discovery and registration
  perf/x86/amd/uncore: Refactor uncore management
  perf/core: Allow reading package events from perf_event_read_local
  perf/x86/cstate: Allow reading the package statistics from local CPU
  perf/x86/intel/pt: Fix kernel-doc comments
  perf/x86/rapl: Annotate 'struct rapl_pmus' with __counted_by
  perf/core: Rename perf_proc_update_handler() -> perf_event_max_sample_rate_handler(), for readability
  perf/x86/rapl: Fix "Using plain integer as NULL pointer" Sparse warning
  perf/x86/rapl: Use local64_try_cmpxchg in rapl_event_update()
  perf/x86/rapl: Stop doing cpu_relax() in the local64_cmpxchg() loop in rapl_event_update()
  perf/core: Bail out early if the request AUX area is out of bound
  perf/x86/intel: Extend the ref-cycles event to GP counters
  perf/x86/intel: Fix broken fixed event constraints extension
  ...