- 29 Apr, 2012 6 commits
-
-
-
Heiko Stübner authored
This controller not only supports higher resolutions than the K1900 but concurrent updates as well. This results in a generally higher display speed. Signed-off-by:
Heiko Stübner <heiko@sntech.de> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Heiko Stübner authored
This controller only supports smaller resolutions and only serial updates, i.e. it has to wait for an update to finish before starting another one. Signed-off-by:
Heiko Stübner <heiko@sntech.de> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Heiko Stübner authored
The AUO-K190X controllers share a very similar set of commands and can therefore also share most of the driver code. Signed-off-by:
Heiko Stübner <heiko@sntech.de> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Heiko Stübner authored
With this optional callback the driver is notified when the first page is entered into the pagelist and a new deferred_io call is scheduled. A possible use-case for this is runtime-pm. In the first_io call pm_runtime_get() could be called, which starts an asynchronous runtime_resume of the device. In the deferred_io callback a call to pm_runtime_barrier() makes the sure, the device is resumed by then and a pm_runtime_put() may put the device back to sleep. Also, some SoCs may use the runtime-pm system to determine if they are able to enter deeper idle states. Therefore it is necessary to keep the use-count from the first written page until the conclusion of the screen update, to prevent the system from going to sleep before completing the pending update. Two users of defio were using kmalloc to allocate the structure. These allocations are changed to kzalloc, to prevent uninitialised .first_io members in those drivers. Signed-off-by:
Heiko Stübner <heiko@sntech.de> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Steven J. Hill authored
Add support for LCD panel on MIPS SEAD-3 development platform. Signed-off-by:
Douglas Leung <douglas@mips.com> Signed-off-by:
Chris Dearman <chris@mips.com> Signed-off-by:
Steven J. Hill <sjhill@mips.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
- 24 Apr, 2012 1 commit
-
-
Laurent Pinchart authored
The exynos_mipi_dsi_set_main_disp_[hv]porch() functions take front and back porch arguments in that order. This maps to the fb_videomode right/lower_margin and left/upper_margin respectively. Fix the caller accordingly. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Donghwa Lee <dh09.lee@samsung.com>
-
- 21 Apr, 2012 3 commits
-
-
Marek Vasut authored
If there's some traffic on the LCD controller pads, the BootROM has trouble with sampling the bootmode from these pads. The BootROM usually ends in a loop. Signed-off-by:
Marek Vasut <marek.vasut@gmail.com> Cc: Chen Peter-B29397 <B29397@freescale.com> Cc: Detlev Zundel <dzu@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Li Frank-B20596 <B20596@freescale.com> Cc: Lin Tony-B19295 <B19295@freescale.com> Cc: Linux FBDEV <linux-fbdev@vger.kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Subodh Nijsure <snijsure@grid-net.com> Cc: Tony Lin <tony.lin@freescale.com> Acked-by:
Shawn Guo <shawn.guo@linaro.org> Acked-by:
Wolfgang Denk <wd@denx.de> Acked-by:
Wolfram Sang <w.sang@pengutronix.de> Tested-by:
Wolfgang Denk <wd@denx.de> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Julia Lawall authored
The test tested not the most recently allocated value but a previously allocated one. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Julia Lawall authored
There were two problems in this code: failure of the setup function should free locally allocated resources like other nearby failures, and the test if (&info->cmap) can never be false. To generally clean things up, this patch reorders the error handling code at the failed label and adds labels so that the conditionals are not necessary. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Acked-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by:
Ryan Mallon <rmallon@gmail.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
- 18 Apr, 2012 1 commit
-
-
David Brown authored
The change commit 461cbe77 Author: Gregory Bean <gbean@codeaurora.org> Date: Wed Jul 28 10:22:13 2010 -0700 video: msm: Fix section mismatch in mddi.c. fixes a section mismatch between the board file and the driver's probe function, however, it misses the additional mismatches between the probe function and some routines it calls. Fix these up as well. Signed-off-by:
David Brown <davidb@codeaurora.org> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
- 16 Apr, 2012 4 commits
-
-
Jingoo Han authored
This patch adds analog and pll control setting. This control setting is used for DP TX PHY block to set the values as below. It is beneficial to improve analog characteristics. - TX terminal registor is 50 Ohm. - Reference clock of PHY is 24 MHz. - Power source for TX digital logic is 1.0625 V. - Power source for internal clock driver is 1.0625 V. - PLL VCO range setting is 600 uA. - Power down ring osc is turned off. - AUX terminal resistor is 50 Ohm. - AUX channel current is 8 mA and multiplied by 2. - TX channel output amplitude is 400 mV. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Jingoo Han authored
The char pointer for adjust_request variable is replaced with char array to fix possible null pointer dereference when clock recovery is failed. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Jingoo Han authored
DP PLL Lock status should be checked in order to prevent unlocked PLL. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Jingoo Han authored
This patch adds runtime_get/put to suspend/resume, which should be necessary to prevent the problem to access the fimd register without block power on. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
- 15 Apr, 2012 1 commit
-
-
Alexander Guy authored
Signed-off-by:
Alexander Guy <alexander.guy@guy-engineering.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
- 09 Apr, 2012 6 commits
-
-
Axel Lin authored
If wait_event_interruptible_timeout returns a positive value, it means the condition evaluated is true. Which means priv->shared->hw_running is false. And then we will exit the loop. This patch simplifies the logic to exit the while loop. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Thomas Abraham authored
For all the Samsung SoC based boards which have the platform data for s3c-fb driver, the 'default_win' element in the platform data is removed and the lcd panel video timing values are moved out of individual window configuration data. Acked-by:
Jingoo Han <jg1.han@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: JeongHyeon Kim <jhkim@insignal.co.kr> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kwangwoo Lee <kwangwoo.lee@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by:
Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Thomas Abraham authored
The display controller window data should contain window configuration data for only one type of lcd panel. So, for real6410 and mini6410 boards, split the existing display controller window data, which contains window configuration data for two different types of lcd panels, into two seperate instances and register one of them depending on the type of the lcd panel detected at runtime. This is a prerequisite change for a subsequent commit that reorders the platform data of display controller by moving video interface timing out of window setup data. Cc: Darius Augulis <augulis.darius@gmail.com> Acked-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Thomas Abraham authored
The decision to enable or disable the data output to the lcd panel from the controller need not be based on the value of 'default_win' element in the platform data. Instead, the data output to the panel is enabled if any of the windows are active, else data output is disabled. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Thomas Abraham authored
The video interface timing is independent of the window setup data. The resolution of the window can be smaller than that of the lcd panel to which the video data is output. So move the video timing data from the per-window setup data to the platform specific section in the platform data. This also removes the restriction that atleast one window should have the same resolution as that of the panel attached. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by:
Thomas Abraham <thomas.abraham@linaro.org> Acked-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Wang YanQing authored
This patch fix the oops below that catched in my machine [ 81.560602] uvesafb: NVIDIA Corporation, GT216 Board - 0696a290, Chip Rev , OEM: NVIDIA, VBE v3.0 [ 81.609384] uvesafb: protected mode interface info at c000:d350 [ 81.609388] uvesafb: pmi: set display start = c00cd3b3, set palette = c00cd40e [ 81.609390] uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 81.614558] uvesafb: VBIOS/hardware doesn't support DDC transfers [ 81.614562] uvesafb: no monitor limits have been set, default refresh rate will be used [ 81.614994] uvesafb: scrolling: ypan using protected mode interface, yres_virtual=4915 [ 81.744147] kernel tried to execute NX-protected page - exploit attempt? (uid: 0) [ 81.744153] BUG: unable to handle kernel paging request at c00cd3b3 [ 81.744159] IP: [<c00cd3b3>] 0xc00cd3b2 [ 81.744167] *pdpt = 00000000016d6001 *pde = 0000000001c7b067 *pte = 80000000000cd163 [ 81.744171] Oops: 0011 [#1] SMP [ 81.744174] Modules linked in: uvesafb(+) cfbcopyarea cfbimgblt cfbfillrect [ 81.744178] [ 81.744181] Pid: 3497, comm: modprobe Not tainted 3.3.0-rc4NX+ #71 Acer Aspire 4741 /Aspire 4741 [ 81.744185] EIP: 0060:[<c00cd3b3>] EFLAGS: 00010246 CPU: 0 [ 81.744187] EIP is at 0xc00cd3b3 [ 81.744189] EAX: 00004f07 EBX: 00000000 ECX: 00000000 EDX: 00000000 [ 81.744191] ESI: f763f000 EDI: f763f6e8 EBP: f57f3a0c ESP: f57f3a00 [ 81.744192] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 81.744195] Process modprobe (pid: 3497, ti=f57f2000 task=f748c600 task.ti=f57f2000) [ 81.744196] Stack: [ 81.744197] f82512c5 f759341c 00000000 f57f3a30 c124a9bc 00000001 00000001 000001e0 [ 81.744202] f8251280 f763f000 f7593400 00000000 f57f3a40 c12598dd f5c0c000 00000000 [ 81.744206] f57f3b10 c1255efe c125a21a 00000006 f763f09c 00000000 c1c6cb60 f7593400 [ 81.744210] Call Trace: [ 81.744215] [<f82512c5>] ? uvesafb_pan_display+0x45/0x60 [uvesafb] [ 81.744222] [<c124a9bc>] fb_pan_display+0x10c/0x160 [ 81.744226] [<f8251280>] ? uvesafb_vbe_find_mode+0x180/0x180 [uvesafb] [ 81.744230] [<c12598dd>] bit_update_start+0x1d/0x50 [ 81.744232] [<c1255efe>] fbcon_switch+0x39e/0x550 [ 81.744235] [<c125a21a>] ? bit_cursor+0x4ea/0x560 [ 81.744240] [<c129b6cb>] redraw_screen+0x12b/0x220 [ 81.744245] [<c128843b>] ? tty_do_resize+0x3b/0xc0 [ 81.744247] [<c129ef42>] vc_do_resize+0x3d2/0x3e0 [ 81.744250] [<c129efb4>] vc_resize+0x14/0x20 [ 81.744253] [<c12586bd>] fbcon_init+0x29d/0x500 [ 81.744255] [<c12984c4>] ? set_inverse_trans_unicode+0xe4/0x110 [ 81.744258] [<c129b378>] visual_init+0xb8/0x150 [ 81.744261] [<c129c16c>] bind_con_driver+0x16c/0x360 [ 81.744264] [<c129b47e>] ? register_con_driver+0x6e/0x190 [ 81.744267] [<c129c3a1>] take_over_console+0x41/0x50 [ 81.744269] [<c1257b7a>] fbcon_takeover+0x6a/0xd0 [ 81.744272] [<c12594b8>] fbcon_event_notify+0x758/0x790 [ 81.744277] [<c10929e2>] notifier_call_chain+0x42/0xb0 [ 81.744280] [<c1092d30>] __blocking_notifier_call_chain+0x60/0x90 [ 81.744283] [<c1092d7a>] blocking_notifier_call_chain+0x1a/0x20 [ 81.744285] [<c124a5a1>] fb_notifier_call_chain+0x11/0x20 [ 81.744288] [<c124b759>] register_framebuffer+0x1d9/0x2b0 [ 81.744293] [<c1061c73>] ? ioremap_wc+0x33/0x40 [ 81.744298] [<f82537c6>] uvesafb_probe+0xaba/0xc40 [uvesafb] [ 81.744302] [<c12bb81f>] platform_drv_probe+0xf/0x20 [ 81.744306] [<c12ba558>] driver_probe_device+0x68/0x170 [ 81.744309] [<c12ba731>] __device_attach+0x41/0x50 [ 81.744313] [<c12b9088>] bus_for_each_drv+0x48/0x70 [ 81.744316] [<c12ba7f3>] device_attach+0x83/0xa0 [ 81.744319] [<c12ba6f0>] ? __driver_attach+0x90/0x90 [ 81.744321] [<c12b991f>] bus_probe_device+0x6f/0x90 [ 81.744324] [<c12b8a45>] device_add+0x5e5/0x680 [ 81.744329] [<c122a1a3>] ? kvasprintf+0x43/0x60 [ 81.744332] [<c121e6e4>] ? kobject_set_name_vargs+0x64/0x70 [ 81.744335] [<c121e6e4>] ? kobject_set_name_vargs+0x64/0x70 [ 81.744339] [<c12bbe9f>] platform_device_add+0xff/0x1b0 [ 81.744343] [<f8252906>] uvesafb_init+0x50/0x9b [uvesafb] [ 81.744346] [<c100111f>] do_one_initcall+0x2f/0x170 [ 81.744350] [<f82528b6>] ? uvesafb_is_valid_mode+0x66/0x66 [uvesafb] [ 81.744355] [<c10c6994>] sys_init_module+0xf4/0x1410 [ 81.744359] [<c1157fc0>] ? vfsmount_lock_local_unlock_cpu+0x30/0x30 [ 81.744363] [<c144cb10>] sysenter_do_call+0x12/0x36 [ 81.744365] Code: f5 00 00 00 32 f6 66 8b da 66 d1 e3 66 ba d4 03 8a e3 b0 1c 66 ef b0 1e 66 ef 8a e7 b0 1d 66 ef b0 1f 66 ef e8 fa 00 00 00 61 c3 <60> e8 c8 00 00 00 66 8b f3 66 8b da 66 ba d4 03 b0 0c 8a e5 66 [ 81.744388] EIP: [<c00cd3b3>] 0xc00cd3b3 SS:ESP 0068:f57f3a00 [ 81.744391] CR2: 00000000c00cd3b3 [ 81.744393] ---[ end trace 18b2c87c925b54d6 ]--- Signed-off-by:
Wang YanQing <udknight@gmail.com> Cc: Michal Januszewski <spock@gentoo.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: stable@vger.kernel.org
-
- 08 Apr, 2012 3 commits
-
-
Manuel Lauss authored
Commit 1c16697b ("drivers/video/au*fb.c: use devm_ functions) introduced 2 build failures in the au1100fb and au1200fb drivers, fix them. Signed-off-by:
Manuel Lauss <manuel.lauss@googlemail.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Ondrej Zary authored
kyrofb is completely broken on x86_64 because the registers are defined as unsigned long. Change them to u32 to make the driver work. Tested with Hercules 3D Prophet 4000XT. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Acked-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Linus Torvalds authored
-
- 07 Apr, 2012 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmapLinus Torvalds authored
Pull two more small regmap fixes from Mark Brown: - Now we have users for it that aren't running Android it turns out that regcache_sync_region() is much more useful to drivers if it's exported for use by modules. Who knew? - Make sure we don't divide by zero when doing debugfs dumps of rbtrees, not visible up until now because everything was providing at least some cache on startup. * tag 'regmap-3.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: prevent division by zero in rbtree_show regmap: Export regcache_sync_region()
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull a few KVM fixes from Avi Kivity: "A bunch of powerpc KVM fixes, a guest and a host RCU fix (unrelated), and a small build fix." * 'kvm-updates/3.4' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Resolve RCU vs. async page fault problem KVM: VMX: vmx_set_cr0 expects kvm->srcu locked KVM: PMU: Fix integer constant is too large warning in kvm_pmu_set_msr() KVM: PPC: Book3S: PR: Fix preemption KVM: PPC: Save/Restore CR over vcpu_run KVM: PPC: Book3S HV: Save and restore CR in __kvmppc_vcore_entry KVM: PPC: Book3S HV: Fix kvm_alloc_linear in case where no linears exist KVM: PPC: Book3S: Compile fix for ppc32 in HIOR access code
-
git://github.com/pmundt/linux-shLinus Torvalds authored
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh: fix clock-sh7757 for the latest sh_mobile_sdhi driver serial: sh-sci: use serial_port_in/out vs sci_in/out. sh: vsyscall: Fix up .eh_frame generation. sh: dma: Fix up device attribute mismatch from sysdev fallout. sh: dwarf unwinder depends on SHcompact. sh: fix up fallout from system.h disintegration.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull security layer fixlet from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: sysctl: fix write access to dmesg_restrict/kptr_restrict
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linuxLinus Torvalds authored
Pull ACPI & Power Management patches from Len Brown: "Two fixes for cpuidle merge-window changes, plus a URL fix in MAINTAINERS" * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: MAINTAINERS: Update git url for ACPI cpuidle: Fix panic in CPU off-lining with no idle driver ACPI processor: Use safe_halt() rather than halt() in acpi_idle_play_dead()
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull target fixes from Nicholas Bellinger: "Pull two tcm_fc fabric related fixes for -rc2: Note that both have been CC'ed to stable, and patch #1 is the important one that addresses a memory corruption bug related to FC exchange timeouts + command abort. Thanks again to MDR for tracking down this issue!" * '3.4-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: tcm_fc: Do not free tpg structure during wq allocation failure tcm_fc: Add abort flag for gracefully handling exchange timeout
-
Mark Rustad authored
Avoid freeing a registered tpg structure if an alloc_workqueue call fails. This fixes a bug where the failure was leaking memory associated with se_portal_group setup during the original core_tpg_register() call. Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Acked-by:
Kiran Patil <Kiran.patil@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Mark Rustad authored
Add abort flag and use it to terminate processing when an exchange is timed out or is reset. The abort flag is used in place of the transport_generic_free_cmd function call in the reset and timeout cases, because calling that function in that context would free memory that was in use. The aborted flag allows the lifetime to be managed in a more normal way, while truncating the processing. This change eliminates a source of memory corruption which manifested in a variety of ugly ways. (nab: Drop unused struct fc_exch *ep in ft_recv_seq) Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Acked-by:
Kiran Patil <Kiran.patil@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Len Brown authored
-
Igor Murzov authored
Signed-off-by:
Igor Murzov <e-mail@date.by> Signed-off-by:
Len Brown <len.brown@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds authored
Pull arch/tile bug fixes from Chris Metcalf: "This includes Paul Gortmaker's change to fix the <asm/system.h> disintegration issues on tile, a fix to unbreak the tilepro ethernet driver, and a backlog of bugfix-only changes from internal Tilera development over the last few months. They have all been to LKML and on linux-next for the last few days. The EDAC change to MAINTAINERS is an oddity but discussion on the linux-edac list suggested I ask you to pull that change through my tree since they don't have a tree to pull edac changes from at the moment." * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (39 commits) drivers/net/ethernet/tile: fix netdev_alloc_skb() bombing MAINTAINERS: update EDAC information tilepro ethernet driver: fix a few minor issues tile-srom.c driver: minor code cleanup edac: say "TILEGx" not "TILEPro" for the tilegx edac driver arch/tile: avoid accidentally unmasking NMI-type interrupt accidentally arch/tile: remove bogus performance optimization arch/tile: return SIGBUS for addresses that are unaligned AND invalid arch/tile: fix finv_buffer_remote() for tilegx arch/tile: use atomic exchange in arch_write_unlock() arch/tile: stop mentioning the "kvm" subdirectory arch/tile: export the page_home() function. arch/tile: fix pointer cast in cacheflush.c arch/tile: fix single-stepping over swint1 instructions on tilegx arch/tile: implement panic_smp_self_stop() arch/tile: add "nop" after "nap" to help GX idle power draw arch/tile: use proper memparse() for "maxmem" options arch/tile: fix up locking in pgtable.c slightly arch/tile: don't leak kernel memory when we unload modules arch/tile: fix bug in delay_backoff() ...
-
Linus Torvalds authored
Merge tag 'stable/for-linus-3.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull xen fixes from Konrad Rzeszutek Wilk: "Two fixes for regressions: * one is a workaround that will be removed in v3.5 with proper fix in the tip/x86 tree, * the other is to fix drivers to load on PV (a previous patch made them only load in PVonHVM mode). The rest are just minor fixes in the various drivers and some cleanup in the core code." * tag 'stable/for-linus-3.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pcifront: avoid pci_frontend_enable_msix() falsely returning success xen/pciback: fix XEN_PCI_OP_enable_msix result xen/smp: Remove unnecessary call to smp_processor_id() xen/x86: Workaround 'x86/ioapic: Add register level checks to detect bogus io-apic entries' xen: only check xen_platform_pci_unplug if hvm
-
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmcLinus Torvalds authored
Pull MMC fixes from Chris Ball: - Disable use of MSI in sdhci-pci, which caused multiple chipsets to stop working in 3.4-rc1. I'll wait to turn this on again until we have a chipset whitelist for it. - Fix a libertas SDIO powered-resume regression introduced in 3.3; thanks to Neil Brown and Rafael Wysocki for this fix. - Fix module reloading on omap_hsmmc. - Stop trusting the spec/card's specified maximum data timeout length, and use three seconds instead. Previously we used 300ms. Also cleanups and fixes for s3c, atmel, sh_mmcif and omap_hsmmc. * tag 'mmc-fixes-for-3.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (28 commits) mmc: use really long write timeout to deal with crappy cards mmc: sdhci-dove: Fix compile error by including module.h mmc: Prevent 1.8V switch for SD hosts that don't support UHS modes. Revert "mmc: sdhci-pci: Add MSI support" Revert "mmc: sdhci-pci: add quirks for broken MSI on O2Micro controllers" mmc: core: fix power class selection mmc: omap_hsmmc: fix module re-insertion mmc: omap_hsmmc: convert to module_platform_driver mmc: omap_hsmmc: make it behave well as a module mmc: omap_hsmmc: trivial cleanups mmc: omap_hsmmc: context save after enabling runtime pm mmc: omap_hsmmc: use runtime put sync in probe error patch mmc: sdio: Use empty system suspend/resume callbacks at the bus level mmc: bus: print bus speed mode of UHS-I card mmc: sdhci-pci: add quirks for broken MSI on O2Micro controllers mmc: sh_mmcif: Simplify calculation of mmc->f_min mmc: sh_mmcif: mmc->f_max should be half of the bus clock mmc: sh_mmcif: double clock speed mmc: block: Remove use of mmc_blk_set_blksize mmc: atmel-mci: add support for odd clock dividers ...
-
- 06 Apr, 2012 2 commits
-
-
Linus Torvalds authored
I have a new optimized x86 "strncpy_from_user()" that will use these same helper functions for all the same reasons the name lookup code uses them. This is preparation for that. This moves them into an architecture-specific header file. It's architecture-specific for two reasons: - some of the functions are likely to want architecture-specific implementations. Even if the current code happens to be "generic" in the sense that it should work on any little-endian machine, it's likely that the "multiply by a big constant and shift" implementation is less than optimal for an architecture that has a guaranteed fast bit count instruction, for example. - I expect that if architectures like sparc want to start playing around with this, we'll need to abstract out a few more details (in particular the actual unaligned accesses). So we're likely to have more architecture-specific stuff if non-x86 architectures start using this. (and if it turns out that non-x86 architectures don't start using this, then having it in an architecture-specific header is still the right thing to do, of course) Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Toshi Kani authored
Fix a NULL pointer dereference panic in cpuidle_play_dead() during CPU off-lining when no cpuidle driver is registered. A cpuidle driver may be registered at boot-time based on CPU type. This patch allows an off-lined CPU to enter HLT-based idle in this condition. Signed-off-by:
Toshi Kani <toshi.kani@hp.com> Cc: Boris Ostrovsky <boris.ostrovsky@amd.com> Reviewed-by:
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Tested-by:
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by:
Len Brown <len.brown@intel.com>
-