Pull pci updates from Bjorn Helgaas:
 "Resource management:

   - Add pci_dev_for_each_resource() and pci_bus_for_each_resource()
     iterators

  PCIe native device hotplug:

   - Fix AB-BA deadlock between reset_lock and device_lock

  Power management:

   - Wait longer for devices to become ready after resume (as we do for
     reset) to accommodate Intel Titan Ridge xHCI devices

   - Extend D3hot delay for NVIDIA HDA controllers to avoid
     unrecoverable devices after a bus reset

  Error handling:

   - Clear PCIe Device Status after EDR since generic error recovery now
     only clears it when AER is native

  ASPM:

   - Work around Chromebook firmware defect that clobbers Capability
     list (including ASPM L1 PM Substates Cap) when returning from
     D3cold to D0

  Freescale i.MX6 PCIe controller driver:

   - Install imprecise external abort handler only when DT indicates
     PCIe support

  Freescale Layerscape PCIe controller driver:

   - Add ls1028a endpoint mode support

  Qualcomm PCIe controller driver:

   - Add SM8550 DT binding and driver support

   - Add SDX55 DT binding and driver support

   - Use bulk APIs for clocks of IP 1.0.0, 2.3.2, 2.3.3

   - Use bulk APIs for reset of IP 2.1.0, 2.3.3, 2.4.0

   - Add DT "mhi" register region for supported SoCs

   - Expose link transition counts via debugfs to help debug low power
     issues

   - Support system suspend and resume; reduce interconnect bandwidth
     and turn off clock and PHY if there are no active devices

   - Enable async probe by default to reduce boot time

  Miscellaneous:

   - Sort controller Kconfig entries by vendor"

* tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (56 commits)
  PCI: xilinx: Drop obsolete dependency on COMPILE_TEST
  PCI: mobiveil: Sort Kconfig entries by vendor
  PCI: dwc: Sort Kconfig entries by vendor
  PCI: Sort controller Kconfig entries by vendor
  PCI: Use consistent controller Kconfig menu entry language
  PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt
  PCI: hv: Add 'Microsoft' to Kconfig prompt
  PCI: meson: Add 'Amlogic' to Kconfig prompt
  PCI: Use of_property_present() for testing DT property presence
  PCI/PM: Extend D3hot delay for NVIDIA HDA controllers
  dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
  PCI: qcom: Add SM8550 PCIe support
  dt-bindings: PCI: qcom: Add SM8550 compatible
  PCI: qcom: Add support for SDX55 SoC
  dt-bindings: PCI: qcom-ep: Fix the unit address used in example
  dt-bindings: PCI: qcom: Add SDX55 SoC
  dt-bindings: PCI: qcom: Update maintainers entry
  PCI: qcom: Enable async probe by default
  PCI: qcom: Add support for system suspend and resume
  PCI/PM: Drop pci_bridge_wait_for_secondary_bus() timeout parameter
  ...

Pull more devicetree updates from Rob Herring:

 - First part of DT header detangling dropping cpu.h from of_device.h
   and replacing some includes with forward declarations. A handful of
   drivers needed some adjustment to their includes as a result.

 - Refactor of_device.h to be used by bus drivers rather than various
   device drivers. This moves non-bus related functions out of
   of_device.h. The end goal is for of_platform.h and of_device.h to
   stop including each other.

 - Refactor open coded parsing of "ranges" in some bus drivers to use DT
   address parsing functions

 - Add some new address parsing functions of_property_read_reg(),
   of_range_count(), and of_range_to_resource() in preparation to
   convert more open coded parsing of DT addresses to use them.

 - Treewide clean-ups to use of_property_read_bool() and
   of_property_present() as appropriate. The ones here are the ones that
   didn't get picked up elsewhere.

* tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
  bus: tegra-gmi: Replace of_platform.h with explicit includes
  hte: Use of_property_present() for testing DT property presence
  w1: w1-gpio: Use of_property_read_bool() for boolean properties
  virt: fsl: Use of_property_present() for testing DT property presence
  soc: fsl: Use of_property_present() for testing DT property presence
  sbus: display7seg: Use of_property_read_bool() for boolean properties
  sparc: Use of_property_read_bool() for boolean properties
  sparc: Use of_property_present() for testing DT property presence
  bus: mvebu-mbus: Remove open coded "ranges" parsing
  of/address: Add of_property_read_reg() helper
  of/address: Add of_range_count() helper
  of/address: Add support for 3 address cell bus
  of/address: Add of_range_to_resource() helper
  of: unittest: Add bus address range parsing tests
  of: Drop cpu.h include from of_device.h
  OPP: Adjust includes to remove of_device.h
  irqchip: loongson-eiointc: Add explicit include for cpuhotplug.h
  cpuidle: Adjust includes to remove of_device.h
  cpufreq: sun50i: Add explicit include for cpu.h
  cpufreq: Adjust includes to remove of_device.h
  ...

Pull devicetree updates from Rob Herring:
 "Bindings:

   - Convert Qcom IOMMU, Amlogic timer, Freescale sec-v4.0, Toshiba
     TC358764 display bridge, Parade PS8622 display bridge, and Xilinx
     FPGA bindings to DT schema format

   - Add qdu1000 and sa8775p SoC support to Qcom PDC interrupt
     controller

   - Add MediaTek MT8365 UART and SYSIRQ bindings

   - Add Arm Cortex-A78C and X1C core compatibles

   - Add vendor prefix for Novatek

   - Remove bindings for stih415, sti416, stid127 platforms

   - Drop uneeded quotes in schema files. This is preparation for
     yamllint checking quoting for us.

   - Add missing (unevaluated|additional)Properties constraints on child
     node schemas

   - Clean-up schema comments formatting

   - Fix I2C and SPI node bus names in schema examples

   - Clean-up some display compatibles schema syntax

   - Fix incorrect references to lvds.yaml

   - Gather all cache controller bindings in a common directory

  DT core:

   - Convert unittest to new void .remove platform device hook

   - kerneldoc fixes for DT address of_pci_range_to_resource/
     of_address_to_resource functions"

* tag 'devicetree-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (46 commits)
  dt-bindings: rng: Drop unneeded quotes
  dt-bindings: arm/soc: mediatek: Drop unneeded quotes
  dt-bindings: soc: qcom: Drop unneeded quotes
  dt-bindings: i2c: samsung: Fix 'deprecated' value
  dt-bindings: display: Fix lvds.yaml references
  dt-bindings: display: simplify compatibles syntax
  dt-bindings: display: mediatek: simplify compatibles syntax
  dt-bindings: drm/bridge: ti-sn65dsi86: Fix the video-interfaces.yaml references
  dt-bindings: timer: Drop unneeded quotes
  dt-bindings: interrupt-controller: qcom,pdc: document qcom,qdu1000-pdc
  dt-bindings: interrupt-controller: qcom-pdc: add compatible for sa8775p
  dt-bindings: reset: remove stih415/stih416 reset
  dt-bindings: net: dwmac: sti: remove stih415/sti416/stid127
  dt-bindings: irqchip: sti: remove stih415/stih416 and stid127
  dt-bindings: iommu: Convert QCOM IOMMU to YAML
  dt-bindings: irqchip: ti,sci-inta: Add optional power-domains property
  dt-bindings: Add missing (unevaluated|additional)Properties on child node schemas
  of: address: Reshuffle to remove forward declarations
  of: address: Fix documented return value of of_pci_range_to_resource()
  of: address: Document return value of of_address_to_resource()
  ...

Pull iommufd updates from Jason Gunthorpe:
 "Two series:

   - Reorganize how the hardware page table objects are managed,
     particularly their destruction flow. Increase the selftest test
     coverage in this area by creating a more complete mock iommu
     driver.

     This is preparation to add a replace operation for HWPT binding,
     which is done but waiting for the VFIO parts to complete so there
     is a user.

   - Split the iommufd support for "access" to make it two step -
     allocate an access then link it to an IOAS. Update VFIO and have
     VFIO always create an access even for the VFIO mdevs that never do
     DMA.

     This is also preperation for the replace VFIO series that will
     allow replace to work on access types as well.

  Three minor fixes:

   - Sykzaller found the selftest code didn't check for overflow when
     processing user VAs

   - smatch noted a .data item should have been static

   - Add a selftest that reproduces a syzkaller bug for batch carry
     already fixed in rc"

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (21 commits)
  iommufd/selftest: Cover domain unmap with huge pages and access
  iommufd/selftest: Set varaiable mock_iommu_device storage-class-specifier to static
  vfio: Check the presence for iommufd callbacks in __vfio_register_dev()
  vfio/mdev: Uses the vfio emulated iommufd ops set in the mdev sample drivers
  vfio-iommufd: Make vfio_iommufd_emulated_bind() return iommufd_access ID
  vfio-iommufd: No need to record iommufd_ctx in vfio_device
  iommufd: Create access in vfio_iommufd_emulated_bind()
  iommu/iommufd: Pass iommufd_ctx pointer in iommufd_get_ioas()
  iommufd/selftest: Catch overflow of uptr and length
  iommufd/selftest: Add a selftest for iommufd_device_attach() with a hwpt argument
  iommufd/selftest: Make selftest create a more complete mock device
  iommufd/selftest: Rename the remaining mock device_id's to stdev_id
  iommufd/selftest: Rename domain_id to hwpt_id for FIXTURE iommufd_mock_domain
  iommufd/selftest: Rename domain_id to stdev_id for FIXTURE iommufd_ioas
  iommufd/selftest: Rename the sefltest 'device_id' to 'stdev_id'
  iommufd: Make iommufd_hw_pagetable_alloc() do iopt_table_add_domain()
  iommufd: Move iommufd_device to iommufd_private.h
  iommufd: Move ioas related HWPT destruction into iommufd_hw_pagetable_destroy()
  iommufd: Consistently manage hwpt_item
  iommufd: Add iommufd_lock_obj() around the auto-domains hwpts
  ...

Pull drm fixes from Dave Airlie:
 "A bit out of routine fixes pull for rc1.

  There's a build breakage on some platforms due to ttm, this has that
  fix + qaic uapi removal + minor panel fixes.

  ttm:
   - Fix TTM build on archs where PMD_SHIFT is not constant

  qaic:
   - Revert uAPI from accel/qaic

  panel:
   - Improve error handling in nt35950
   - Fix double unregister in otm8009a when removing the driver"

* tag 'drm-next-2023-04-27' of git://anongit.freedesktop.org/drm/drm:
  drm/panel: novatek-nt35950: Only unregister DSI1 if it exists
  drm/panel: otm8009a: Set backlight parent to panel device
  drm/panel: novatek-nt35950: Improve error handling
  drm/ttm: revert "Reduce the number of used allocation orders for TTM pages"
  Revert "accel/qaic: Add mhi_qaic_cntl"

After upgrading build guests to v6.3, rpm started segfaulting for
specific packages, which was bisected to commit 0503ea8f ("mm/mmap:
remove __vma_adjust()"). rpm is doing many mremap() operations with file
mappings of its db. The problem is that in vma_merge() case 3 (we merge
with the next vma, expanding it downwards) vm_pgoff is not adjusted as
it should when vm_start changes. As a result the rpm process most likely
sees data from the wrong offset of the file. Fix the vm_pgoff
calculation.

For case 8 this is a non-functional change as the resulting vm_pgoff is
the same.
Reported-and-bisected-by: Jiri Slaby <jirislaby@kernel.org>
Reported-and-tested-by: Fabian Vogt <fvogt@suse.com>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1210903
Fixes: 0503ea8f ("mm/mmap: remove __vma_adjust()")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'drm-misc-next-fixes-2023-04-26' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next-fixes for v6.4-rc1:
- Revert uAPI from accel/qaic.
- Fix TTM build on archs where PMD_SHIFT is not constant.
- Improve error handling in nt35950.
- Fix double unregister in otm8009a when removing the driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/45757de9-75d8-5b41-f1f9-562a7c4675b9@linux.intel.com

Pull networking updates from Paolo Abeni:
 "Core:

   - Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
     default value allows for better BIG TCP performances

   - Reduce compound page head access for zero-copy data transfers

   - RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
     possible

   - Threaded NAPI improvements, adding defer skb free support and
     unneeded softirq avoidance

   - Address dst_entry reference count scalability issues, via false
     sharing avoidance and optimize refcount tracking

   - Add lockless accesses annotation to sk_err[_soft]

   - Optimize again the skb struct layout

   - Extends the skb drop reasons to make it usable by multiple
     subsystems

   - Better const qualifier awareness for socket casts

  BPF:

   - Add skb and XDP typed dynptrs which allow BPF programs for more
     ergonomic and less brittle iteration through data and
     variable-sized accesses

   - Add a new BPF netfilter program type and minimal support to hook
     BPF programs to netfilter hooks such as prerouting or forward

   - Add more precise memory usage reporting for all BPF map types

   - Adds support for using {FOU,GUE} encap with an ipip device
     operating in collect_md mode and add a set of BPF kfuncs for
     controlling encap params

   - Allow BPF programs to detect at load time whether a particular
     kfunc exists or not, and also add support for this in light
     skeleton

   - Bigger batch of BPF verifier improvements to prepare for upcoming
     BPF open-coded iterators allowing for less restrictive looping
     capabilities

   - Rework RCU enforcement in the verifier, add kptr_rcu and enforce
     BPF programs to NULL-check before passing such pointers into kfunc

   - Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
     in local storage maps

   - Enable RCU semantics for task BPF kptrs and allow referenced kptr
     tasks to be stored in BPF maps

   - Add support for refcounted local kptrs to the verifier for allowing
     shared ownership, useful for adding a node to both the BPF list and
     rbtree

   - Add BPF verifier support for ST instructions in
     convert_ctx_access() which will help new -mcpu=v4 clang flag to
     start emitting them

   - Add ARM32 USDT support to libbpf

   - Improve bpftool's visual program dump which produces the control
     flow graph in a DOT format by adding C source inline annotations

  Protocols:

   - IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
     indicates the provenance of the IP address

   - IPv6: optimize route lookup, dropping unneeded R/W lock acquisition

   - Add the handshake upcall mechanism, allowing the user-space to
     implement generic TLS handshake on kernel's behalf

   - Bridge: support per-{Port, VLAN} neighbor suppression, increasing
     resilience to nodes failures

   - SCTP: add support for Fair Capacity and Weighted Fair Queueing
     schedulers

   - MPTCP: delay first subflow allocation up to its first usage. This
     will allow for later better LSM interaction

   - xfrm: Remove inner/outer modes from input/output path. These are
     not needed anymore

   - WiFi:
      - reduced neighbor report (RNR) handling for AP mode
      - HW timestamping support
      - support for randomized auth/deauth TA for PASN privacy
      - per-link debugfs for multi-link
      - TC offload support for mac80211 drivers
      - mac80211 mesh fast-xmit and fast-rx support
      - enable Wi-Fi 7 (EHT) mesh support

  Netfilter:

   - Add nf_tables 'brouting' support, to force a packet to be routed
     instead of being bridged

   - Update bridge netfilter and ovs conntrack helpers to handle IPv6
     Jumbo packets properly, i.e. fetch the packet length from
     hop-by-hop extension header. This is needed for BIT TCP support

   - The iptables 32bit compat interface isn't compiled in by default
     anymore

   - Move ip(6)tables builtin icmp matches to the udptcp one. This has
     the advantage that icmp/icmpv6 match doesn't load the
     iptables/ip6tables modules anymore when iptables-nft is used

   - Extended netlink error report for netdevice in flowtables and
     netdev/chains. Allow for incrementally add/delete devices to netdev
     basechain. Allow to create netdev chain without device

  Driver API:

   - Remove redundant Device Control Error Reporting Enable, as PCI core
     has already error reporting enabled at enumeration time

   - Move Multicast DB netlink handlers to core, allowing devices other
     then bridge to use them

   - Allow the page_pool to directly recycle the pages from safely
     localized NAPI

   - Implement lockless TX queue stop/wake combo macros, allowing for
     further code de-duplication and sanitization

   - Add YNL support for user headers and struct attrs

   - Add partial YNL specification for devlink

   - Add partial YNL specification for ethtool

   - Add tc-mqprio and tc-taprio support for preemptible traffic classes

   - Add tx push buf len param to ethtool, specifies the maximum number
     of bytes of a transmitted packet a driver can push directly to the
     underlying device

   - Add basic LED support for switch/phy

   - Add NAPI documentation, stop relaying on external links

   - Convert dsa_master_ioctl() to netdev notifier. This is a
     preparatory work to make the hardware timestamping layer selectable
     by user space

   - Add transceiver support and improve the error messages for CAN-FD
     controllers

  New hardware / drivers:

   - Ethernet:
      - AMD/Pensando core device support
      - MediaTek MT7981 SoC
      - MediaTek MT7988 SoC
      - Broadcom BCM53134 embedded switch
      - Texas Instruments CPSW9G ethernet switch
      - Qualcomm EMAC3 DWMAC ethernet
      - StarFive JH7110 SoC
      - NXP CBTX ethernet PHY

   - WiFi:
      - Apple M1 Pro/Max devices
      - RealTek rtl8710bu/rtl8188gu
      - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset

   - Bluetooth:
      - Realtek RTL8821CS, RTL8851B, RTL8852BS
      - Mediatek MT7663, MT7922
      - NXP w8997
      - Actions Semi ATS2851
      - QTI WCN6855
      - Marvell 88W8997

   - Can:
      - STMicroelectronics bxcan stm32f429

  Drivers:

   - Ethernet NICs:
      - Intel (1G, icg):
         - add tracking and reporting of QBV config errors
         - add support for configuring max SDU for each Tx queue
      - Intel (100G, ice):
         - refactor mailbox overflow detection to support Scalable IOV
         - GNSS interface optimization
      - Intel (i40e):
         - support XDP multi-buffer
      - nVidia/Mellanox:
         - add the support for linux bridge multicast offload
         - enable TC offload for egress and engress MACVLAN over bond
         - add support for VxLAN GBP encap/decap flows offload
         - extend packet offload to fully support libreswan
         - support tunnel mode in mlx5 IPsec packet offload
         - extend XDP multi-buffer support
         - support MACsec VLAN offload
         - add support for dynamic msix vectors allocation
         - drop RX page_cache and fully use page_pool
         - implement thermal zone to report NIC temperature
      - Netronome/Corigine:
         - add support for multi-zone conntrack offload
      - Solarflare/Xilinx:
         - support offloading TC VLAN push/pop actions to the MAE
         - support TC decap rules
         - support unicast PTP

   - Other NICs:
      - Broadcom (bnxt): enforce software based freq adjustments only on
        shared PHC NIC
      - RealTek (r8169): refactor to addess ASPM issues during NAPI poll
      - Micrel (lan8841): add support for PTP_PF_PEROUT
      - Cadence (macb): enable PTP unicast
      - Engleder (tsnep): add XDP socket zero-copy support
      - virtio-net: implement exact header length guest feature
      - veth: add page_pool support for page recycling
      - vxlan: add MDB data path support
      - gve: add XDP support for GQI-QPL format
      - geneve: accept every ethertype
      - macvlan: allow some packets to bypass broadcast queue
      - mana: add support for jumbo frame

   - Ethernet high-speed switches:
      - Microchip (sparx5): Add support for TC flower templates

   - Ethernet embedded switches:
      - Broadcom (b54):
         - configure 6318 and 63268 RGMII ports
      - Marvell (mv88e6xxx):
         - faster C45 bus scan
      - Microchip:
         - lan966x:
            - add support for IS1 VCAP
            - better TX/RX from/to CPU performances
         - ksz9477: add ETS Qdisc support
         - ksz8: enhance static MAC table operations and error handling
         - sama7g5: add PTP capability
      - NXP (ocelot):
         - add support for external ports
         - add support for preemptible traffic classes
      - Texas Instruments:
         - add CPSWxG SGMII support for J7200 and J721E

   - Intel WiFi (iwlwifi):
      - preparation for Wi-Fi 7 EHT and multi-link support
      - EHT (Wi-Fi 7) sniffer support
      - hardware timestamping support for some devices/firwmares
      - TX beacon protection on newer hardware

   - Qualcomm 802.11ax WiFi (ath11k):
      - MU-MIMO parameters support
      - ack signal support for management packets

   - RealTek WiFi (rtw88):
      - SDIO bus support
      - better support for some SDIO devices (e.g. MAC address from
        efuse)

   - RealTek WiFi (rtw89):
      - HW scan support for 8852b
      - better support for 6 GHz scanning
      - support for various newer firmware APIs
      - framework firmware backwards compatibility

   - MediaTek WiFi (mt76):
      - P2P support
      - mesh A-MSDU support
      - EHT (Wi-Fi 7) support
      - coredump support"

* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
  net: phy: hide the PHYLIB_LEDS knob
  net: phy: marvell-88x2222: remove unnecessary (void*) conversions
  tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
  net: amd: Fix link leak when verifying config failed
  net: phy: marvell: Fix inconsistent indenting in led_blink_set
  lan966x: Don't use xdp_frame when action is XDP_TX
  tsnep: Add XDP socket zero-copy TX support
  tsnep: Add XDP socket zero-copy RX support
  tsnep: Move skb receive action to separate function
  tsnep: Add functions for queue enable/disable
  tsnep: Rework TX/RX queue initialization
  tsnep: Replace modulo operation with mask
  net: phy: dp83867: Add led_brightness_set support
  net: phy: Fix reading LED reg property
  drivers: nfc: nfcsim: remove return value check of `dev_dir`
  net: phy: dp83867: Remove unnecessary (void*) conversions
  net: ethtool: coalesce: try to make user settings stick twice
  net: mana: Check if netdev/napi_alloc_frag returns single page
  net: mana: Rename mana_refill_rxoob and remove some empty lines
  net: veth: add page_pool stats
  ...

Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (megaraid_sas, scsi_debug, lpfc, target,
  mpi3mr, hisi_sas, arcmsr).

  The major core change is the constification of the host templates
  (which touches everything) along with other minor fixups and clean
  ups"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (207 commits)
  scsi: ufs: mcq: Use pointer arithmetic in ufshcd_send_command()
  scsi: ufs: mcq: Annotate ufshcd_inc_sq_tail() appropriately
  scsi: cxlflash: s/semahpore/semaphore/
  scsi: lpfc: Silence an incorrect device output
  scsi: mpi3mr: Use IRQ save variants of spinlock to protect chain frame allocation
  scsi: scsi_debug: Fix missing error code in scsi_debug_init()
  scsi: hisi_sas: Work around build failure in suspend function
  scsi: lpfc: Fix ioremap issues in lpfc_sli4_pci_mem_setup()
  scsi: mpt3sas: Fix an issue when driver is being removed
  scsi: mpt3sas: Remove HBA BIOS version in the kernel log
  scsi: target: core: Fix invalid memory access
  scsi: scsi_debug: Drop sdebug_queue
  scsi: scsi_debug: Only allow sdebug_max_queue be modified when no shosts
  scsi: scsi_debug: Use scsi_host_busy() in delay_store() and ndelay_store()
  scsi: scsi_debug: Use blk_mq_tagset_busy_iter() in stop_all_queued()
  scsi: scsi_debug: Use blk_mq_tagset_busy_iter() in sdebug_blk_mq_poll()
  scsi: scsi_debug: Dynamically allocate sdebug_queued_cmd
  scsi: scsi_debug: Use scsi_block_requests() to block queues
  scsi: scsi_debug: Protect block_unblock_all_queues() with mutex
  scsi: scsi_debug: Change shost list lock to a mutex
  ...

Pull ata updates from Damien Le Moal:

 - Many cleanups of the pata_parport driver and of its protocol modules
   (Ondrej)

 - Remove unused code (ata_id_xxx() functions) (Sergey)

 - Add Add UniPhier SATA controller DT bindings (Kunihiko)

 - Fix dependencies for the Freescale QorIQ AHCI SATA controller driver
   (Geert)

 - DT property handling improvements (Rob)

* tag 'ata-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (57 commits)
  ata: pata_parport-bpck6: Declare mode_map as static
  ata: pata_parport-bpck6: Remove dependency on 64BIT
  ata: pata_parport-bpck6: reduce indents in bpck6_open
  ata: pata_parport-bpck6: delete ppc6lnx.c
  ata: pata_parport-bpck6: move defines and mode_map to bpck6.c
  ata: pata_parport-bpck6: move ppc6_wr_data_byte to bpck6.c and rename
  ata: pata_parport-bpck6: move ppc6_rd_data_byte to bpck6.c and rename
  ata: pata_parport-bpck6: move ppc6_send_cmd to bpck6.c and rename
  ata: pata_parport-bpck6: move ppc6_deselect to bpck6.c and rename
  ata: pata_parport-bpck6: merge ppc6_select into bpck6_open
  ata: pata_parport-bpck6: move ppc6_open to bpck6.c and rename
  ata: pata_parport-bpck6: move ppc6_wr_extout to bpck6.c and rename
  ata: pata_parport-bpck6: move ppc6_wait_for_fifo to bpck6.c and rename
  ata: pata_parport-bpck6: merge ppc6_wr_data_blk into bpck6_write_block
  ata: pata_parport-bpck6: merge ppc6_rd_data_blk into bpck6_read_block
  ata: pata_parport-bpck6: merge ppc6_wr_port16_blk into bpck6_write_block
  ata: pata_parport-bpck6: merge ppc6_rd_port16_blk into bpck6_read_block
  ata: pata_parport-bpck6: merge ppc6_wr_port into bpck6_write_regr
  ata: pata_parport-bpck6: merge ppc6_rd_port into bpck6_read_regr
  ata: pata_parport-bpck6: remove ppc6_close
  ...

Merge tag 'for-6.4/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Split dm-bufio's rw_semaphore and rbtree. Offers improvements to
   dm-bufio's locking to allow increased concurrent IO -- particularly
   for read access for buffers already in dm-bufio's cache.

 - Also split dm-bio-prison-v1's spinlock and rbtree with comparable aim
   at improving concurrent IO (for the DM thinp target).

 - Both the dm-bufio and dm-bio-prison-v1 scaling of the number of locks
   and rbtrees used are managed by dm_num_hash_locks(). And the hash
   function used by both is dm_hash_locks_index().

 - Allow DM targets to require DISCARD, WRITE_ZEROES and SECURE_ERASE to
   be split at the target specified boundary (in terms of
   max_discard_sectors, max_write_zeroes_sectors and
   max_secure_erase_sectors respectively).

 - DM verity error handling fix for check_at_most_once on FEC.

 - Update DM verity target to emit audit events on verification failure
   and more.

 - DM core ->io_hints improvements needed in support of new discard
   support that is added to the DM "zero" and "error" targets.

 - Fix missing kmem_cache_destroy() call in initialization error path of
   both the DM integrity and DM clone targets.

 - A couple fixes for DM flakey, also add "error_reads" feature.

 - Fix DM core's resume to not lock FS when the DM map is NULL;
   otherwise initial table load can race with FS mount that takes
   superblock's ->s_umount rw_semaphore.

 - Various small improvements to both DM core and DM targets.

* tag 'for-6.4/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (40 commits)
  dm: don't lock fs when the map is NULL in process of resume
  dm flakey: add an "error_reads" option
  dm flakey: remove trailing space in the table line
  dm flakey: fix a crash with invalid table line
  dm ioctl: fix nested locking in table_clear() to remove deadlock concern
  dm: unexport dm_get_queue_limits()
  dm: allow targets to require splitting WRITE_ZEROES and SECURE_ERASE
  dm: add helper macro for simple DM target module init and exit
  dm raid: remove unused d variable
  dm: remove unnecessary (void*) conversions
  dm mirror: add DMERR message if alloc_workqueue fails
  dm: push error reporting down to dm_register_target()
  dm integrity: call kmem_cache_destroy() in dm_integrity_init() error path
  dm clone: call kmem_cache_destroy() in dm_clone_init() error path
  dm error: add discard support
  dm zero: add discard support
  dm table: allow targets without devices to set ->io_hints
  dm verity: emit audit events on verification failure and more
  dm verity: fix error handling for check_at_most_once on FEC
  dm: improve hash_locks sizing and hash function
  ...

Pull block updates from Jens Axboe:

 - drbd patches, bringing us closer to unifying the out-of-tree version
   and the in tree one (Andreas, Christoph)

 - support for auto-quiesce for the s390 dasd driver (Stefan)

 - MD pull request via Song:
      - md/bitmap: Optimal last page size (Jon Derrick)
      - Various raid10 fixes (Yu Kuai, Li Nan)
      - md: add error_handlers for raid0 and linear (Mariusz Tkaczyk)

 - NVMe pull request via Christoph:
      - Drop redundant pci_enable_pcie_error_reporting (Bjorn Helgaas)
      - Validate nvmet module parameters (Chaitanya Kulkarni)
      - Fence TCP socket on receive error (Chris Leech)
      - Fix async event trace event (Keith Busch)
      - Minor cleanups (Chaitanya Kulkarni, zhenwei pi)
      - Fix and cleanup nvmet Identify handling (Damien Le Moal,
        Christoph Hellwig)
      - Fix double blk_mq_complete_request race in the timeout handler
        (Lei Yin)
      - Fix irq locking in nvme-fcloop (Ming Lei)
      - Remove queue mapping helper for rdma devices (Sagi Grimberg)

 - use structured request attribute checks for nbd (Jakub)

 - fix blk-crypto race conditions between keyslot management (Eric)

 - add sed-opal support for reading read locking range attributes
   (Ondrej)

 - make fault injection configurable for null_blk (Akinobu)

 - clean up the request insertion API (Christoph)

 - clean up the queue running API (Christoph)

 - blkg config helper cleanups (Tejun)

 - lazy init support for blk-iolatency (Tejun)

 - various fixes and tweaks to ublk (Ming)

 - remove hybrid polling. It hasn't really been useful since we got
   async polled IO support, and these days we don't support sync polled
   IO at all (Keith)

 - misc fixes, cleanups, improvements (Zhong, Ondrej, Colin, Chengming,
   Chaitanya, me)

* tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux: (118 commits)
  nbd: fix incomplete validation of ioctl arg
  ublk: don't return 0 in case of any failure
  sed-opal: geometry feature reporting command
  null_blk: Always check queue mode setting from configfs
  block: ublk: switch to ioctl command encoding
  blk-mq: fix the blk_mq_add_to_requeue_list call in blk_kick_flush
  block, bfq: Fix division by zero error on zero wsum
  fault-inject: fix build error when FAULT_INJECTION_CONFIGFS=y and CONFIGFS_FS=m
  block: store bdev->bd_disk->fops->submit_bio state in bdev
  block: re-arrange the struct block_device fields for better layout
  md/raid5: remove unused working_disks variable
  md/raid10: don't call bio_start_io_acct twice for bio which experienced read error
  md/raid10: fix memleak of md thread
  md/raid10: fix memleak for 'conf->bio_split'
  md/raid10: fix leak of 'r10bio->remaining' for recovery
  md/raid10: don't BUG_ON() in raise_barrier()
  md: fix soft lockup in status_resync
  md: add error_handlers for raid0 and linear
  md: Use optimal I/O size for last bitmap page
  md: Fix types in sb writer
  ...

Pull io_uring updates from Jens Axboe:

 - Cleanup of the io-wq per-node mapping, notably getting rid of it so
   we just have a single io_wq entry per ring (Breno)

 - Followup to the above, move accounting to io_wq as well and
   completely drop struct io_wqe (Gabriel)

 - Enable KASAN for the internal io_uring caches (Breno)

 - Add support for multishot timeouts. Some applications use timeouts to
   wake someone waiting on completion entries, and this makes it a bit
   easier to just have a recurring timer rather than needing to rearm it
   every time (David)

 - Support archs that have shared cache coloring between userspace and
   the kernel, and hence have strict address requirements for mmap'ing
   the ring into userspace. This should only be parisc/hppa. (Helge, me)

 - XFS has supported O_DIRECT writes without needing to lock the inode
   exclusively for a long time, and ext4 now supports it as well. This
   is true for the common cases of not extending the file size. Flag the
   fs as having that feature, and utilize that to avoid serializing
   those writes in io_uring (me)

 - Enable completion batching for uring commands (me)

 - Revert patch adding io_uring restriction to what can be GUP mapped or
   not. This does not belong in io_uring, as io_uring isn't really
   special in this regard. Since this is also getting in the way of
   cleanups and improvements to the GUP code, get rid of if (me)

 - A few series greatly reducing the complexity of registered resources,
   like buffers or files. Not only does this clean up the code a lot,
   the simplified code is also a LOT more efficient (Pavel)

 - Series optimizing how we wait for events and run task_work related to
   it (Pavel)

 - Fixes for file/buffer unregistration with DEFER_TASKRUN (Pavel)

 - Misc cleanups and improvements (Pavel, me)

* tag 'for-6.4/io_uring-2023-04-21' of git://git.kernel.dk/linux: (71 commits)
  Revert "io_uring/rsrc: disallow multi-source reg buffers"
  io_uring: add support for multishot timeouts
  io_uring/rsrc: disassociate nodes and rsrc_data
  io_uring/rsrc: devirtualise rsrc put callbacks
  io_uring/rsrc: pass node to io_rsrc_put_work()
  io_uring/rsrc: inline io_rsrc_put_work()
  io_uring/rsrc: add empty flag in rsrc_node
  io_uring/rsrc: merge nodes and io_rsrc_put
  io_uring/rsrc: infer node from ctx on io_queue_rsrc_removal
  io_uring/rsrc: remove unused io_rsrc_node::llist
  io_uring/rsrc: refactor io_queue_rsrc_removal
  io_uring/rsrc: simplify single file node switching
  io_uring/rsrc: clean up __io_sqe_buffers_update()
  io_uring/rsrc: inline switch_start fast path
  io_uring/rsrc: remove rsrc_data refs
  io_uring/rsrc: fix DEFER_TASKRUN rsrc quiesce
  io_uring/rsrc: use wq for quiescing
  io_uring/rsrc: refactor io_rsrc_ref_quiesce
  io_uring/rsrc: remove io_rsrc_node::done
  io_uring/rsrc: use nospec'ed indexes
  ...

Pull f2fs update from Jaegeuk Kim:
 "In this round, we've mainly modified to support non-power-of-two zone
  size, which is not required for f2fs by design. In order to avoid arch
  dependency, we refactored the messy rb_entry structure shared across
  different extent_cache. In addition to the improvement, we've also
  fixed several subtle bugs and error cases.

  Enhancements:
   - support non-power-of-two zone size for zoned device
   - remove sharing the rb_entry structure in extent cache
   - refactor f2fs_gc to call checkpoint in urgent condition
   - support iopoll

  Bug fixes:
   - fix potential corruption when moving a directory
   - fix to avoid use-after-free for cached IPU bio
   - fix the folio private usage
   - avoid kernel warnings or panics in the cp_error case
   - fix to recover quota data correctly
   - fix some bugs in atomic operations
   - fix system crash due to lack of free space in LFS
   - fix null pointer panic in tracepoint in __replace_atomic_write_block
   - fix iostat lock protection
   - fix scheduling while atomic in decompression path
   - preserve direct write semantics when buffering is forced
   - fix to call f2fs_wait_on_page_writeback() in f2fs_write_raw_pages()"

* tag 'f2fs-for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (52 commits)
  f2fs: remove unnessary comment in __may_age_extent_tree
  f2fs: allocate node blocks for atomic write block replacement
  f2fs: use cow inode data when updating atomic write
  f2fs: remove power-of-two limitation of zoned device
  f2fs: allocate trace path buffer from names_cache
  f2fs: add has_enough_free_secs()
  f2fs: relax sanity check if checkpoint is corrupted
  f2fs: refactor f2fs_gc to call checkpoint in urgent condition
  f2fs: remove folio_detach_private() in .invalidate_folio and .release_folio
  f2fs: remove bulk remove_proc_entry() and unnecessary kobject_del()
  f2fs: support iopoll method
  f2fs: remove batched_trim_sections node description
  f2fs: fix to check return value of inc_valid_block_count()
  f2fs: fix to check return value of f2fs_do_truncate_blocks()
  f2fs: fix passing relative address when discard zones
  f2fs: fix potential corruption when moving a directory
  f2fs: add radix_tree_preload_end in error case
  f2fs: fix to recover quota data correctly
  f2fs: fix to check readonly condition correctly
  docs: f2fs: Correct instruction to disable checkpoint
  ...

Pull dlm updates from David Teigland:

 - Remove some unused features (related to lock timeouts) that have been
   previously scheduled for removal

 - Fix a bug where the pending callback flag would be incorrectly
   cleared, which could potentially result in missing a completion
   callback

 - Use an unbound workqueue for dlm socket handling so that socket
   operations can be processed with less delay

 - Fix possible lockspace join connection errors with large clusters
   (e.g. over 16 nodes) caused by a small socket backlog setting

 - Use atomic bit ops for internal flags to help avoid mistakes copying
   flag values from messages

 - Fix recently introduced bug where memory for lvb data could be
   unnecessarily allocated for a lock

* tag 'dlm-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  fs: dlm: stop unnecessarily filling zero ms_extra bytes
  fs: dlm: switch lkb_sbflags to atomic ops
  fs: dlm: rsb hash table flag value to atomic ops
  fs: dlm: move internal flags to atomic ops
  fs: dlm: change dflags to use atomic bits
  fs: dlm: store lkb distributed flags into own value
  fs: dlm: remove DLM_IFL_LOCAL_MS flag
  fs: dlm: rename stub to local message flag
  fs: dlm: remove deprecated code parts
  DLM: increase socket backlog to avoid hangs with 16 nodes
  fs: dlm: add unbound flag to dlm_io workqueue
  fs: dlm: fix DLM_IFL_CB_PENDING gets overwritten

Pull gfs2 updates from Andreas Gruenbacher:

 - Fix revoke processing at unmount and on read-only remount

 - Refuse reading in inodes with an impossible indirect block height

 - Various minor cleanups

* tag 'gfs2-v6.3-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: gfs2_ail_empty_gl no log flush on error
  gfs2: Issue message when revokes cannot be written
  gfs2: Perform second log flush in gfs2_make_fs_ro
  gfs2: return errors from gfs2_ail_empty_gl
  gfs2: Move variable assignment behind a null pointer check in inode_go_dump
  gfs2: Use gfs2_holder_initialized for jindex
  gfs2: Eliminate gfs2_trim_blocks
  gfs2: Fix inode height consistency check
  gfs2: Remove ghs[] from gfs2_unlink
  gfs2: Remove ghs[] from gfs2_link
  gfs2: Remove duplicate i_nlink check from gfs2_link()

Pull btrfs updates from David Sterba:
 "Mostly core changes and cleanups, some notable fixes and two
  performance improvements in directory logging.

  The IO path cleanups are removing or refactoring old code, scrub main
  loop has been completely rewritten also refactoring old code.

  There are some changes to non-btrfs code, mostly trivial, the cgroup
  punt bio logic is only moved from generic code.

  Performance improvements:

   - improve logging changes in a directory during one transaction,
     avoid iterating over items and reduce lock contention (fsync time
     4x lower)

   - when logging directory entries during one transaction, reduce
     locking of subvolume trees by checking tree-log instead
     (improvement in throughput and latency for concurrent access to a
     subvolume)

  Notable fixes:

   - dev-replace:
      - properly honor read mode when requested to avoid reading from
        source device
      - target device won't be used for eventual read repair, this is
        unreliable for NODATASUM files
      - when there are unpaired (and unrepairable) metadata during
        replace, exit early with error and don't try to finish whole
        operation

   - scrub ioctl properly rejects unknown flags

   - fix global block reserve calculations

   - fix partial direct io write when there's a page fault in the
     middle, iomap will try to continue with partial request but the
     btrfs part did not match that, this can lead to zeros written
     instead of data

  Core changes:

   - io path:
      - continued cleanups and refactoring around bio handling
      - extent io submit path simplifications and cleanups
      - flush write path simplifications and cleanups
      - rework logic of passing sync mode of bio, with further cleanups

   - rewrite scrub code flow, restructure how the stripes are enumerated
     and verified in a more unified way

   - allow to set lower threshold for block group reclaim in debug mode
     to aid zoned mode testing

   - remove obsolete time-based delayed ref throttling logic when
     truncating items

   - DREW locks are not using percpu variables anymore

   - more warning fixes (-Wmaybe-uninitialized)

   - u64 division simplifications

   - error handling improvements

  Non-btrfs code changes:

   - push cgroup punt bio logic to btrfs code (there was no other user
     of that), the functionality can be now selected separately by
     BLK_CGROUP_PUNT_BIO

   - crc32c_impl removed after removing last uses in btrfs code

   - add btrfs_assertfail() to objtool table"

* tag 'for-6.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (147 commits)
  btrfs: mark btrfs_assertfail() __noreturn
  btrfs: fix uninitialized variable warnings
  btrfs: use log root when iterating over index keys when logging directory
  btrfs: avoid iterating over all indexes when logging directory
  btrfs: dev-replace: error out if we have unrepaired metadata error during
  btrfs: remove pointless loop at btrfs_get_next_valid_item()
  btrfs: scrub: reject unsupported scrub flags
  btrfs: reinterpret async discard iops_limit=0 as no delay
  btrfs: set default discard iops_limit to 1000
  btrfs: remove unused raid56 functions which were dedicated for scrub
  btrfs: scrub: remove scrub_bio structure
  btrfs: scrub: remove scrub_block and scrub_sector structures
  btrfs: scrub: remove the old scrub recheck code
  btrfs: scrub: remove the old writeback infrastructure
  btrfs: scrub: remove scrub_parity structure
  btrfs: scrub: use scrub_stripe to implement RAID56 P/Q scrub
  btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure
  btrfs: scrub: introduce helper to queue a stripe for scrub
  btrfs: scrub: introduce error reporting functionality for scrub_stripe
  btrfs: scrub: introduce a writeback helper for scrub_stripe
  ...

Pull ext2, reiserfs, udf, and quota updates from Jan Kara:
 "A couple of small fixes and cleanups for ext2, udf, reiserfs, and
  quota.

  The biggest change is making CONFIG_PRINT_QUOTA_WARNING depend on
  BROKEN with an outlook for removing it completely in an year or so"

* tag 'fs_for_v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  quota: mark PRINT_QUOTA_WARNING as BROKEN
  quota: update Kconfig comment
  reiserfs: remove unused iter variable
  quota: Use register_sysctl_init() for registering fs_dqstats_table
  reiserfs: remove unused sched_count variable
  ext2: remove redundant assignment to pointer end
  quota: make dquot_set_dqinfo return errors from ->write_info
  quota: fixup *_write_file_info() to return proper error code
  quota: simplify two-level sysctl registration for fs_dqstats_table
  udf: use wrapper i_blocksize() in udf_discard_prealloc()
  udf: Use folios in udf_adinicb_writepage()
  ext2: Check block size validity during mount
  ext2: Correct maximum ext2 filesystem block size

Pull ext4 updates from Ted Ts'o:
 "There are a number of major cleanups in ext4 this cycle:

   - The data=journal writepath has been significantly cleaned up and
     simplified, and reduces a large number of data=journal special
     cases by Jan Kara.

   - Ojaswin Muhoo has replaced linked list used to track extents that
     have been used for inode preallocation with a red-black tree in the
     multi-block allocator. This improves performance for workloads
     which do a large number of random allocating writes.

   - Thanks to Kemeng Shi for a lot of cleanup and bug fixes in the
     multi-block allocator.

   - Matthew wilcox has converted the code paths for reading and writing
     ext4 pages to use folios.

   - Jason Yan has continued to factor out ext4_fill_super() into
     smaller functions for improve ease of maintenance and
     comprehension.

   - Josh Triplett has created an uapi header for ext4 userspace API's"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (105 commits)
  ext4: Add a uapi header for ext4 userspace APIs
  ext4: remove useless conditional branch code
  ext4: remove unneeded check of nr_to_submit
  ext4: move dax and encrypt checking into ext4_check_feature_compatibility()
  ext4: factor out ext4_block_group_meta_init()
  ext4: move s_reserved_gdt_blocks and addressable checking into ext4_check_geometry()
  ext4: rename two functions with 'check'
  ext4: factor out ext4_flex_groups_free()
  ext4: use ext4_group_desc_free() in ext4_put_super() to save some duplicated code
  ext4: factor out ext4_percpu_param_init() and ext4_percpu_param_destroy()
  ext4: factor out ext4_hash_info_init()
  Revert "ext4: Fix warnings when freezing filesystem with journaled data"
  ext4: Update comment in mpage_prepare_extent_to_map()
  ext4: Simplify handling of journalled data in ext4_bmap()
  ext4: Drop special handling of journalled data from ext4_quota_on()
  ext4: Drop special handling of journalled data from ext4_evict_inode()
  ext4: Fix special handling of journalled data from extent zeroing
  ext4: Drop special handling of journalled data from extent shifting operations
  ext4: Drop special handling of journalled data from ext4_sync_file()
  ext4: Commit transaction before writing back pages in data=journal mode
  ...

Pull fsverity updates from Eric Biggers:
 "Several cleanups and fixes for fs/verity/, including a couple minor
  fixes to the changes in 6.3 that added support for Merkle tree block
  sizes less than the page size"

* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
  fsverity: reject FS_IOC_ENABLE_VERITY on mode 3 fds
  fsverity: explicitly check for buffer overflow in build_merkle_tree()
  fsverity: use WARN_ON_ONCE instead of WARN_ON
  fs-verity: simplify sysctls with register_sysctl()
  fs/buffer.c: use b_folio for fsverity work

Pull fscrypt updates from Eric Biggers:
 "A few cleanups for fs/crypto/, and another patch to prepare for the
  upcoming CephFS encryption support"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
  fscrypt: optimize fscrypt_initialize()
  fscrypt: use WARN_ON_ONCE instead of WARN_ON
  fscrypt: new helper function - fscrypt_prepare_lookup_partial()
  fs/buffer.c: use b_folio for fscrypt work

Pull crypto updates from Herbert Xu:
 "API:
   - Total usage stats now include all that returned errors (instead of
     just some)
   - Remove maximum hash statesize limit
   - Add cloning support for hmac and unkeyed hashes
   - Demote BUG_ON in crypto_unregister_alg to a WARN_ON

  Algorithms:
   - Use RIP-relative addressing on x86 to prepare for PIE build
   - Add accelerated AES/GCM stitched implementation on powerpc P10
   - Add some test vectors for cmac(camellia)
   - Remove failure case where jent is unavailable outside of FIPS mode
     in drbg
   - Add permanent and intermittent health error checks in jitter RNG

  Drivers:
   - Add support for 402xx devices in qat
   - Add support for HiSTB TRNG
   - Fix hash concurrency issues in stm32
   - Add OP-TEE firmware support in caam"

* tag 'v6.4-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (139 commits)
  i2c: designware: Add doorbell support for Mendocino
  i2c: designware: Use PCI PSP driver for communication
  powerpc: Move Power10 feature PPC_MODULE_FEATURE_P10
  crypto: p10-aes-gcm - Remove POWER10_CPU dependency
  crypto: testmgr - Add some test vectors for cmac(camellia)
  crypto: cryptd - Add support for cloning hashes
  crypto: cryptd - Convert hash to use modern init_tfm/exit_tfm
  crypto: hmac - Add support for cloning
  crypto: hash - Add crypto_clone_ahash/shash
  crypto: api - Add crypto_clone_tfm
  crypto: api - Add crypto_tfm_get
  crypto: x86/sha - Use local .L symbols for code
  crypto: x86/crc32 - Use local .L symbols for code
  crypto: x86/aesni - Use local .L symbols for code
  crypto: x86/sha256 - Use RIP-relative addressing
  crypto: x86/ghash - Use RIP-relative addressing
  crypto: x86/des3 - Use RIP-relative addressing
  crypto: x86/crc32c - Use RIP-relative addressing
  crypto: x86/cast6 - Use RIP-relative addressing
  crypto: x86/cast5 - Use RIP-relative addressing
  ...

Merge tag 'flex-array-transformations-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull flexible-array updates from Gustavo Silva:
 "Transform more zero-length and one-element arrays into C99
  flexible-array members"

* tag 'flex-array-transformations-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  uapi: net: ipv6: Replace fake flex-array with flex-array member
  drm/vmwgfx: Replace one-element array with flexible-array member
  ASoC: uapi: Replace zero-length arrays with __DECLARE_FLEX_ARRAY() helper

commit 4bb7aac7 ("net: phy: fix circular LEDS_CLASS dependencies")
solved a build failure, but introduces a new config knob with a default
'y' value: PHYLIB_LEDS.

The latter is against the current new config policy. The exception
was raised to allow the user to catch bad configurations without led
support.

Anyway the current definition of PHYLIB_LEDS does not fit the above
goal: if LEDS_CLASS is disabled, the new config will be available
only with PHYLIB disabled, too.

Hide the mentioned config, to preserve the randconfig testing done so
far, while respecting the mentioned policy.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/d82489be8ed911c383c3447e9abf469995ccf39a.1682496488.git.pabeni@redhat.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

No conflicts.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Pull power management updates from Rafael Wysocki:
 "These update several cpufreq drivers and the cpufreq core, add sysfs
  interface for exposing the time really spent in the platform low-power
  state during suspend-to-idle, update devfreq (core and drivers) and
  the pm-graph suite of tools and clean up code.

  Specifics:

   - Fix the frequency unit in cpufreq_verify_current_freq checks()
     Sanjay Chandrashekara)

   - Make mode_state_machine in amd-pstate static (Tom Rix)

   - Make the cpufreq core require drivers with target_index() to set
     freq_table (Viresh Kumar)

   - Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry (Jingyu Wang)

   - Use of_property_read_bool() for boolean properties in the pmac32
     cpufreq driver (Rob Herring)

   - Make the cpufreq sysfs interface return proper error codes on
     obviously invalid input (qinyu)

   - Add guided autonomous mode support to the AMD P-state driver (Wyes
     Karny)

   - Make the Intel P-state driver enable HWP IO boost on all server
     platforms (Srinivas Pandruvada)

   - Add opp and bandwidth support to tegra194 cpufreq driver (Sumit
     Gupta)

   - Use of_property_present() for testing DT property presence (Rob
     Herring)

   - Remove MODULE_LICENSE in non-modules (Nick Alcock)

   - Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss)

   - Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof
     Kozlowski, Konrad Dybcio, and Bjorn Andersson)

   - DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and
     Bartosz Golaszewski)

   - Updates and fixes for mediatek driver (Jia-Wei Chang and
     AngeloGioacchino Del Regno)

   - Use of_property_present() for testing DT property presence in the
     cpuidle code (Rob Herring)

   - Drop unnecessary (void *) conversions from the PM core (Li zeming)

   - Add sysfs files to represent time spent in a platform sleep state
     during suspend-to-idle and make AMD and Intel PMC drivers use them
     Mario Limonciello)

   - Use of_property_present() for testing DT property presence (Rob
     Herring)

   - Add set_required_opps() callback to the 'struct opp_table', to make
     the code paths cleaner (Viresh Kumar)

   - Update the pm-graph siute of utilities to v5.11 with the following
     changes:
       * New script which allows users to install the latest pm-graph
         from the upstream github repo.
       * Update all the dmesg suspend/resume PM print formats to be able
         to process recent timelines using dmesg only.
       * Add ethtool output to the log for the system's ethernet device
         if ethtool exists.
       * Make the tool more robustly handle events where mangled dmesg
         or ftrace outputs do not include all the requisite data.

   - Make the sleepgraph utility recognize "CPU killed" messages (Xueqin
     Luo)

   - Remove unneeded SRCU selection in Kconfig because it's always set
     from devfreq core (Paul E. McKenney)

   - Drop of_match_ptr() macro from exynos-bus.c because this driver is
     always using the DT table for driver probe (Krzysztof Kozlowski)

   - Use the preferred of_property_present() instead of the low-level
     of_get_property() on exynos-bus.c (Rob Herring)

   - Use devm_platform_get_and_ioream_resource() in exyno-ppmu.c (Yang
     Li)"

* tag 'pm-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (44 commits)
  platform/x86/intel/pmc: core: Report duration of time in HW sleep state
  platform/x86/intel/pmc: core: Always capture counters on suspend
  platform/x86/amd: pmc: Report duration of time in hw sleep state
  PM: Add sysfs files to represent time spent in hardware sleep state
  cpufreq: use correct unit when verify cur freq
  cpufreq: tegra194: add OPP support and set bandwidth
  cpufreq: amd-pstate: Make varaiable mode_state_machine static
  PM: core: Remove unnecessary (void *) conversions
  cpufreq: drivers with target_index() must set freq_table
  PM / devfreq: exynos-ppmu: Use devm_platform_get_and_ioremap_resource()
  OPP: Move required opps configuration to specialized callback
  OPP: Handle all genpd cases together in _set_required_opps()
  cpufreq: qcom-cpufreq-hw: Revert adding cpufreq qos
  dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCM2290
  dt-bindings: cpufreq: cpufreq-qcom-hw: Sanitize data per compatible
  dt-bindings: cpufreq: cpufreq-qcom-hw: Allow just 1 frequency domain
  cpufreq: Add SM7225 to cpufreq-dt-platdev blocklist
  cpufreq: qcom-cpufreq-hw: fix double IO unmap and resource release on exit
  cpufreq: mediatek: Raise proc and sram max voltage for MT7622/7623
  cpufreq: mediatek: raise proc/sram max voltage for MT8516
  ...

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to upstream revision
  20230331, fix the ACPI SBS driver and the evaluation of the _PDC
  method on Xen dom0 in the ACPI processor driver, update the ACPI
  driver for Intel SoCs and clean up code in multiple places.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20230331
     including the following changes:
       * Delete bogus node_array array of pointers from AEST table
         (Jessica Clarke)
       * Add support for trace buffer extension in GICC to the ACPI MADT
         parser (Xiongfeng Wang)
       * Add missing macro ACPI_FUNCTION_TRACE() for
         acpi_ns_repair_HID() (Xiongfeng Wang)
       * Add missing tables to astable (Pedro Falcato)
       * Add support for 64 bit loong_arch compilation to ACPICA (Huacai
         Chen)
       * Add support for ASPT table in disassembler to ACPICA (Jeremi
         Piotrowski)
       * Add support for Arm's MPAM ACPI table version 2 (Hesham
         Almatary)
       * Update all copyrights/signons in ACPICA to 2023 (Bob Moore)
       * Add support for ClockInput resource (v6.5) (Niyas Sait)
       * Add RISC-V INTC interrupt controller definition to the list of
         supported interrupt controllers for MADT (Sunil V L)
       * Add structure definitions for the RISC-V RHCT ACPI table (Sunil
         V L)
       * Address several cases in which the ACPICA code might lead to
         undefined behavior (Tamir Duberstein)
       * Make ACPICA code support flexible arrays properly (Kees Cook)
       * Check null return of ACPI_ALLOCATE_ZEROED in
         acpi_db_display_objects() (void0red)
       * Add os specific support for Zephyr RTOS to ACPICA (Najumon)
       * Update version to 20230331 (Bob Moore)

   - Fix evaluating the _PDC ACPI control method when running as Xen
     dom0 (Roger Pau Monne)

   - Use platform devices to load ACPI PPC and PCC drivers (Petr Pavlu)

   - Check for null return of devm_kzalloc() in fch_misc_setup() (Kang
     Chen)

   - Log a message if enable_irq_wake() fails for the ACPI SCI (Simon
     Gaiser)

   - Initialize the correct IOMMU fwspec while parsing ACPI VIOT
     (Jean-Philippe Brucker)

   - Amend indentation and prefix error messages with FW_BUG in the ACPI
     SPCR parsing code (Andy Shevchenko)

   - Enable ACPI sysfs support for CCEL records (Kuppuswamy
     Sathyanarayanan)

   - Make the APEI error injection code warn on invalid arguments when
     explicitly indicated by platform (Shuai Xue)

   - Add CXL error types to the error injection code in APEI (Tony Luck)

   - Refactor acpi_data_prop_read_single() (Andy Shevchenko)

   - Fix two issues in the ACPI SBS driver (Armin Wolf)

   - Replace ternary operator with min_t() in the generic ACPI thermal
     zone driver (Jiangshan Yi)

   - Ensure that ACPI notify handlers are not running after removal and
     clean up code in acpi_sb_notify() (Rafael Wysocki)

   - Remove register_backlight_delay module option and code and remove
     quirks for false-positive backlight control support advertised on
     desktop boards (Hans de Goede)

   - Replace irqdomain.h include with struct declarations in ACPI
     headers and update several pieces of code previously including of.h
     implicitly through those headers (Rob Herring)

   - Fix acpi_evaluate_dsm_typed() redefinition error (Kiran K)

   - Update the pm_profile sysfs attribute documentation (Rafael
     Wysocki)

   - Add 80862289 ACPI _HID for second PWM controller on Cherry Trail to
     the ACPI driver for Intel SoCs (Hans de Goede)"

* tag 'acpi-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
  ACPI: LPSS: Add 80862289 ACPI _HID for second PWM controller on Cherry Trail
  ACPI: bus: Ensure that notify handlers are not running after removal
  ACPI: bus: Add missing braces to acpi_sb_notify()
  ACPI: video: Remove desktops without backlight DMI quirks
  ACPI: video: Remove register_backlight_delay module option and code
  ACPI: Replace irqdomain.h include with struct declarations
  fpga: lattice-sysconfig-spi: Add explicit include for of.h
  tpm: atmel: Add explicit include for of.h
  virtio-mmio: Add explicit include for of.h
  pata: ixp4xx: Add explicit include for of.h
  ata: pata_macio: Add explicit include of irqdomain.h
  serial: 8250_tegra: Add explicit include for of.h
  net: rfkill-gpio: Add explicit include for of.h
  staging: iio: resolver: ad2s1210: Add explicit include for of.h
  iio: adc: ad7292: Add explicit include for of.h
  ACPICA: Update version to 20230331
  ACPICA: add os specific support for Zephyr RTOS
  ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects
  ACPICA: acpi_resource_irq: Replace 1-element arrays with flexible array
  ACPICA: acpi_madt_oem_data: Fix flexible array member definition
  ...

Pull thermal control updates from Rafael Wysocki:
 "These mostly continue to prepare the thermal control subsystem for
  using unified representation of trip points, which includes cleanups,
  code refactoring and similar and update several drivers (for other
  reasons), which includes new hardware support.

  Specifics:

   - Add a thermal zone 'devdata' accessor and modify several drivers to
     use it (Daniel Lezcano)

   - Prevent drivers from using the 'device' internal thermal zone
     structure field directly (Daniel Lezcano)

   - Clean up the hwmon thermal driver (Daniel Lezcano)

   - Add thermal zone id accessor and thermal zone type accessor and
     prevent drivers from using thermal zone fields directly (Daniel
     Lezcano)

   - Clean up the acerhdf and tegra thermal drivers (Daniel Lezcano)

   - Add lower bound check for sysfs input to the x86_pkg_temp_thermal
     Intel thermal driver (Zhang Rui)

   - Add more thermal zone device encapsulation: prevent setting
     structure field directly, access the sensor device instead the
     thermal zone's device for trace, relocate the traces in
     drivers/thermal (Daniel Lezcano)

   - Use the generic trip point for the i.MX and remove the
     get_trip_temp ops (Daniel Lezcano)

   - Use the devm_platform_ioremap_resource() in the Hisilicon driver
     (Yang Li)

   - Remove R-Car H3 ES1.* handling as public has only access to the ES2
     version and the upstream support for the ES1 has been shutdown
     (Wolfram Sang)

   - Add a delay after initializing the bank in order to let the time to
     the hardware to initialze itself before reading the temperature
     (Amjad Ouled-Ameur)

   - Add MT8365 support (Amjad Ouled-Ameur)

   - Preparational cleanup and DT bindings for RK3588 support (Sebastian
     Reichel)

   - Add driver support for RK3588 (Finley Xiao)

   - Use devm_reset_control_array_get_exclusive() for the Rockchip
     driver (Ye Xingchen)

   - Detect power gated thermal zones and return -EAGAIN when reading
     the temperature (Mikko Perttunen)

   - Remove thermal_bind_params structure as it is unused (Zhang Rui)

   - Drop unneeded quotes in DT bindings allowing to run yamllint (Rob
     Herring)

   - Update the power allocator documentation according to the thermal
     trace relocation (Lukas Bulwahn)

   - Fix sensor 1 interrupt status bitmask for the Mediatek LVTS sensor
     (Chen-Yu Tsai)

   - Use the dev_err_probe() helper in the Amlogic driver (Ye Xingchen)

   - Add AP domain support to LVTS thermal controllers for mt8195
     (Balsam CHIHI)

   - Remove buggy call to thermal_of_zone_unregister() (Daniel Lezcano)

   - Make thermal_of_zone_[un]register() private to the thermal OF code
     (Daniel Lezcano)

   - Create a private copy of the thermal zone device parameters
     structure when registering a thermal zone (Daniel Lezcano)

   - Fix a kernel NULL pointer dereference in thermal_hwmon (Zhang Rui)

   - Revert recent message adjustment in thermal_hwmon (Rafael Wysocki)

   - Use of_property_present() for testing DT property presence in
     thermal control code (Rob Herring)

   - Clean up thermal_list_lock locking in the thermal core (Rafael
     Wysocki)

   - Add DLVR support for RFIM control in the int340x Intel thermal
     driver (Srinivas Pandruvada)"

* tag 'thermal-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits)
  thermal: intel: int340x: Add DLVR support for RFIM control
  thermal/core: Alloc-copy-free the thermal zone parameters structure
  thermal/of: Unexport unused OF functions
  thermal/drivers/bcm2835: Remove buggy call to thermal_of_zone_unregister
  thermal/drivers/mediatek/lvts_thermal: Add AP domain for mt8195
  dt-bindings: thermal: mediatek: Add AP domain to LVTS thermal controllers for mt8195
  thermal: amlogic: Use dev_err_probe()
  thermal/drivers/mediatek/lvts_thermal: Fix sensor 1 interrupt status bitmask
  MAINTAINERS: adjust entry in THERMAL/POWER_ALLOCATOR after header movement
  dt-bindings: thermal: Drop unneeded quotes
  thermal/core: Remove thermal_bind_params structure
  thermal/drivers/tegra-bpmp: Handle offline zones
  thermal/drivers/rockchip: use devm_reset_control_array_get_exclusive()
  dt-bindings: rockchip-thermal: Support the RK3588 SoC compatible
  thermal/drivers/rockchip: Support RK3588 SoC in the thermal driver
  thermal/drivers/rockchip: Support dynamic sized sensor array
  thermal/drivers/rockchip: Simplify channel id logic
  thermal/drivers/rockchip: Use dev_err_probe
  thermal/drivers/rockchip: Simplify clock logic
  thermal/drivers/rockchip: Simplify getting match data
  ...

Pull hwmon updates from Guenter Roeck:
 "New drivers

   - Driver for Acbel FSB032 power supply

   - Driver for StarFive JH71x0 temperature sensor

  Added support to existing drivers:

   - aquacomputer_d5next: Support for Aquacomputer Aquastream XT

   - nct6775: Added various ASUS boards to list of boards supporting WMI

   - asus-ec-sensors: ROG STRIX Z390-F GAMING, ProArt B550-Creator,

  Notable improvements:

   - Regulator event and sysfs notification support for PMBus drivers

  Notable cleanup:

   - Constified pointers to hwmon_channel_info

  .. and various other minor bug fixes and improvements"

* tag 'hwmon-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (131 commits)
  hwmon: lochnagar: Remove the unneeded include <linux/i2c.h>
  hwmon: (pmbus/fsp-3y) Fix functionality bitmask in FSP-3Y YM-2151E
  hwmon: (adt7475) Use device_property APIs when configuring polarity
  hwmon: (aquacomputer_d5next) Add support for Aquacomputer Aquastream XT
  hwmon: (it87) Disable/enable SMBus access for IT8622E chipset
  hwmon: (it87) Add calls to smbus_enable/smbus_disable as required
  hwmon: (it87) Test for error in it87_update_device
  hwmon: (it87) Disable SMBus access for environmental controller registers.
  docs: hwmon: Add documentaion for acbel-fsg032 PSU
  hwmon: (pmbus/acbel-fsg032) Add Acbel power supply
  dt-bindings: trivial-devices: Add acbel,fsg032
  dt-bindings: vendor-prefixes: Add prefix for acbel
  hwmon: (sfctemp) Simplify error message
  hwmon: (pmbus/ibm-cffps) Use default debugfs attributes and lock function
  hwmon: (pmbus/core) Add lock and unlock functions
  hwmon: (pmbus/core) Request threaded interrupt with IRQF_ONESHOT
  hwmon: (nct6775) update ASUS WMI monitoring list A620/B760/W790
  hwmon: ina2xx: add optional regulator support
  dt-bindings: hwmon: ina2xx: add supply property
  dt-bindings: hwmon: pwm-fan: Convert to DT schema
  ...

Pull remoteproc updates from Bjorn Andersson:

 - Unnecessary type casts from the 'void *' rproc->priv pointer are
   dropped throughout the subsystem.

 - A kernel-doc error is corrected in the Mediatek SCPI IPI
   implementation

 - The firmware loading onto the IMX DSP remote processors is reworked
   to avoid non-32bit memory operations. A module parameter is
   introduced to assist development of firmware without communication
   abilities in place. Error paths in imx_dsp_rproc_mbox_alloc() is
   cleaned up

 - The cluster configuration handling in the TI K3 R5 driver is
   corrected and support for the single-R5 core found in the TI AM62x
   SoC family is introduced

 - The TI PRU driver device- to virtual-address translation is updated
   to avoid compiler warning about the unsigned device-address always
   being larger than 0

 - The ST remoteproc driver is transitioned to use of_property_present()

 - Issues with kicks arriving after the STM32 remote processor has been
   shut down are mitigated by checking the processor's state before
   handling them.

 - Support for mailbox channels for communication with the remote
   processors are added to the Xilinx R5 remoteproc driver. The naming
   of carveouts are corrected and their parsing is reworked. For this a
   couple of fixes targeting the mailbox subsystem are picked up here as
   well.

 - Reference counting of of_nodes are corrected in the ST, STM32, RCAR
   and IMX remoteproc drivers

* tag 'rproc-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (24 commits)
  remoteproc: st: Use of_property_present() for testing DT property presence
  dt-bindings: remoteproc: Drop unneeded quotes
  remoteproc: imx_dsp_rproc: Fix kernel test robot sparse warning
  remoteproc: imx_dsp_rproc: Improve exception handling in imx_dsp_rproc_mbox_alloc()
  remoteproc: pru: Remove always true check positive unsigned value
  dt-bindings: remoteproc: stm32-rproc: Typo fix
  remoteproc: stm32_rproc: Add mutex protection for workqueue
  remoteproc: Remove unnecessary (void*) conversions
  remoteproc: imx_dsp_rproc: Call of_node_put() on iteration error
  remoteproc: imx_rproc: Call of_node_put() on iteration error
  remoteproc: rcar_rproc: Call of_node_put() on iteration error
  remoteproc: st: Call of_node_put() on iteration error
  remoteproc: stm32: Call of_node_put() on iteration error
  remoteproc: k3-r5: Use separate compatible string for TI AM62x SoC family
  dt-bindings: remoteproc: ti: Add new compatible for AM62 SoC family
  remoteproc: k3-r5: Simplify cluster mode setting usage
  remoteproc/mtk_scpi_ipi: Fix one kernel-doc comment
  remoteproc: xilinx: Add mailbox channels for rpmsg
  drivers: remoteproc: xilinx: Fix carveout names
  mailbox: zynqmp: Fix typo in IPI documentation
  ...

Pull rpmsg updates from Bjorn Andersson:
 "The remove functions of the Qualcomm SMD and GLINK RPM platform
  drivers are transitioned to the new void returning prototype. Likewise
  is qcom_smd_unregister_edge() transitioned to void, as it
  unconditionally returned 0.

  An assumption about the ordering of the intent request acknowledgement
  and advertisement of a new intent in the GLINK implementation is
  corrected. Faulty error handling is corrected is improved in the TX
  path, and duplicated code, in the same path, is cleaned up"

* tag 'rpmsg-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  rpmsg: glink: Consolidate TX_DATA and TX_DATA_CONT
  rpmsg: glink: Propagate TX failures in intentless mode as well
  rpmsg: glink: Wait for intent, not just request ack
  rpmsg: glink: Transition intent request signaling to wait queue
  rpmsg: qcom_smd: Convert to platform remove callback returning void
  rpmsg: qcom_glink_rpm: Convert to platform remove callback returning void
  rpmsg: qcom_smd: Make qcom_smd_unregister_edge() return void

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Allow an invalid regulator in mmc_regulator_set_ocr()
   - Log about empty non-removable slots
   - Add helpers to enable/disable the vqmmc regulator

  MMC host:
   - mtk-sd: Add support for the mt8365 variant
   - renesas_sdhi: Remove support for R-Car H3 ES1.* variants
   - sdhci_am654: Add power management support
   - sdhci-cadence: Add support for eMMC hardware reset
   - sdhci-cadence: Add support for AMD Pensando Elba variant
   - sdhci-msm: Add support for the IPQ5018 variant
   - sdhci-msm: Add support for the QCM2290 variant
   - sdhci-of-arasan: Skip setting clock delay for 400KHz
   - sdhci-of-arasan: Add support for the Xilinx Versal Net variant
   - sdhci-of-arasan: Remove Intel Thunder Bay SOC support
   - sdhci-of-arasan: Add support to request the "gate" clock
   - sdhci-of-dwcmshc: Properly determine max clock on Rockchip
   - sdhci-of-esdhc: Fix quirk to ignore command inhibit for data
   - sdhci-pci-o2micro: Fix SDR50 mode timing issue

  MEMSTICK:
   - r592: Fix use-after-free bug in r592_remove due to race condition"

* tag 'mmc-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (40 commits)
  dt-bindings: mmc: sdhci-msm: Document the IPQ5018 compatible
  mmc: vub300: remove unreachable code
  mmc: sdhci-cadence: Support mmc hardware reset
  mmc: sdhci-cadence: Add AMD Pensando Elba SoC support
  mmc: sdhci-cadence: Support device specific init during probe
  mmc: sdhci-cadence: Enable device specific override of writel()
  dt-bindings: mmc: cdns: Add AMD Pensando Elba SoC
  mmc: core: Remove unused macro mmc_req_rel_wr
  mmc: sdhci-of-arasan: Skip setting clock delay for 400KHz
  mmc: sdhci-of-arasan: Add support for eMMC5.1 on Xilinx Versal Net platform
  dt-bindings: mmc: arasan,sdci: Add Xilinx Versal Net compatible
  mmc: sdhci_am654: Add support for PM suspend/resume
  mmc: core: remove unnecessary (void*) conversions
  dt-bindings: mmc: fsl-imx-esdhc: ref sdhci-common.yaml
  mmc: sdhci-of-esdhc: fix quirk to ignore command inhibit for data
  mmc: core: Log about empty non-removable slots
  dt-bindings: mmc: fujitsu: Add Socionext Synquacer
  mmc: sdricoh_cs: remove unused sdricoh_readw function
  dt-bindings: mmc: Remove bindings for Intel Thunder Bay SoC"
  mmc: sdhci-of-arasan: Remove Intel Thunder Bay SOC support
  ...

Pull mtd updates from Miquel Raynal:
 "Core MTD changes:
   - dt-bindings: Drop unneeded quotes
   - mtdblock: Tolerate corrected bit-flips
   - Use of_property_read_bool() for boolean properties
   - Avoid magic values
   - Avoid printing error messages on probe deferrals
   - Prepare mtd_otp_nvmem_add() to handle -EPROBE_DEFER
   - Fix error path for nvmem provider
   - Fix nvmem error reporting
   - Provide unique name for nvmem device

  MTD device changes:
   - lpddr_cmds: Remove unused words variable
   - bcm63xxpart: Remove MODULE_LICENSE in non-modules

  SPI NOR core changes:
   - Introduce Read While Write support for flashes featuring several
     banks
   - Set the 4-Byte Address Mode method based on SFDP data
   - Allow post_sfdp hook to return errors
   - Parse SCCR MC table and introduce support for multi-chip devices

  SPI NOR manufacturer drivers changes:
   - macronix: Add support for mx25uw51245g with RWW
   - spansion:
      - Determine current address mode at runtime as it can be changed
        in a non-volatile way and differ from factory defaults or from
        what SFDP advertises.
      - Enable JFFS2 write buffer mode for few ECC'd NOR flashes:
        S25FS256T, s25hx and s28hx
      - Add support for s25hl02gt and s25hs02gt

  Raw NAND core changes:
   - Convert to platform remove callback returning void
   - Fix spelling mistake waifunc() -> waitfunc()

  Raw NAND controller driver changes:
   - imx: Remove unused is_imx51_nfc and imx53_nfc functions
   - omap2: Drop obsolete dependency on COMPILE_TEST
   - orion: Use devm_platform_ioremap_resource()
   - qcom:
      - Use of_property_present() for testing DT property presence
      - Use devm_platform_get_and_ioremap_resource()
   - stm32_fmc2: Depends on ARCH_STM32 instead of MACH_STM32MP157
   - tmio: Remove reference to config MTD_NAND_TMIO in the parsers

  Raw NAND manufacturer driver changes:
   - hynix: Fix up bit 0 of sdr_timing_mode

  SPI-NAND changes:
   - Add support for ESMT F50x1G41LB"

* tag 'mtd/for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (55 commits)
  mtd: nand: Convert to platform remove callback returning void
  mtd: onenand: omap2: Drop obsolete dependency on COMPILE_TEST
  mtd: spi-nor: spansion: Add support for s25hl02gt and s25hs02gt
  mtd: spi-nor: spansion: Add a new ->ready() hook for multi-chip device
  mtd: spi-nor: spansion: Rework cypress_nor_quad_enable_volatile() for multi-chip device support
  mtd: spi-nor: spansion: Rework cypress_nor_get_page_size() for multi-chip device support
  mtd: spi-nor: sfdp: Add support for SCCR map for multi-chip device
  mtd: spi-nor: Extract volatile register offset from SCCR map
  mtd: spi-nor: Allow post_sfdp hook to return errors
  mtd: spi-nor: spansion: Rename method to cypress_nor_get_page_size
  mtd: spi-nor: spansion: Enable JFFS2 write buffer for S25FS256T
  mtd: spi-nor: spansion: Enable JFFS2 write buffer for Infineon s25hx SEMPER flash
  mtd: spi-nor: spansion: Enable JFFS2 write buffer for Infineon s28hx SEMPER flash
  mtd: spi-nor: spansion: Determine current address mode
  mtd: spi-nor: core: Introduce spi_nor_set_4byte_addr_mode()
  mtd: spi-nor: core: Update flash's current address mode when changing address mode
  mtd: spi-nor: Stop exporting spi_nor_restore()
  mtd: spi-nor: Set the 4-Byte Address Mode method based on SFDP data
  mtd: spi-nor: core: Make spi_nor_set_4byte_addr_mode_brwr public
  mtd: spi-nor: core: Update name and description of spi_nor_set_4byte_addr_mode
  ...

Pull gpio updates from Bartosz Golaszewski:
 "We have some new drivers, significant refactoring of existing intel
  platforms, lots of improvements all around, mass conversion to using
  immutable irqchips by drivers that had not been converted individually
  yet and some changes in the core library code.

  Summary:

  New drivers:
   - add a driver for the Loongson GPIO controller
   - add a driver for the fxl6408 I2C GPIO expander
   - add a GPIO module containing code common for Intel Elkhart Lake and
     Merrifield platforms
   - add a driver for the Intel Elkhart Lake platform reusing the code
     from the intel tangier library

  GPIOLIB core:
   - GPIO ACPI improvements
   - simplify gpiochip_add_data_with_keys() fwnode handling
   - cleanup header inclusions (remove unneeded ones, order the rest
     alphabetically)
   - remove duplicate code (reuse krealloc() instead of open-coding it,
     drop a duplicated check in gpiod_find_and_request())
   - reshuffle the code to remove unnecessary forward declarations
   - coding style cleanups and improvements
   - add a helper for accessing device fwnodes
   - small updates in docs

  Driver improvements:
   - convert all remaining GPIO irqchip drivers to using immutable
     irqchips
   - drop unnecessary of_match_ptr() macro expansions
   - shrink the code in gpio-merrifield significantly by reusing the
     code from gpio-tangier + minor tweaks to the driver code
   - remove MODULE_LICENSE() from drivers that can only be built-in
   - add device-tree support to gpio-loongson1
   - use new regmap features in gpio-104-dio-48e and gpio-pcie-idio-24
   - minor tweaks and fixes to gpio-xra1403, gpio-sim, gpio-tegra194,
     gpio-omap, gpio-aspeed, gpio-raspberrypi-exp
   - shrink code in gpio-ich and gpio-pxa
   - Kconfig tweak for gpio-pmic-eic-sprd"

* tag 'gpio-updates-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (99 commits)
  gpio: gpiolib: Simplify gpiochip_add_data_with_key() fwnode
  gpiolib: Add gpiochip_set_data() helper
  gpiolib: Move gpiochip_get_data() higher in the code
  gpiolib: Check array_info for NULL only once in gpiod_get_array()
  gpiolib: Replace open coded krealloc()
  gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xNU
  gpiolib: acpi: Move ACPI device NULL check to acpi_get_driver_gpio_data()
  gpiolib: acpi: use the fwnode in acpi_gpiochip_find()
  gpio: mm-lantiq: Fix typo in the newly added header filename
  sh: mach-x3proto: Add missing #include <linux/gpio/driver.h>
  powerpc/40x: Add missing select OF_GPIO_MM_GPIOCHIP
  gpio: xlp: Convert to immutable irq_chip
  gpio: xilinx: Convert to immutable irq_chip
  gpio: xgs-iproc: Convert to immutable irq_chip
  gpio: visconti: Convert to immutable irq_chip
  gpio: tqmx86: Convert to immutable irq_chip
  gpio: thunderx: Convert to immutable irq_chip
  gpio: stmpe: Convert to immutable irq_chip
  gpio: siox: Convert to immutable irq_chip
  gpio: rda: Convert to immutable irq_chip
  ...

Pull regulator updates from Mark Brown:
 "A fairly quiet release, there were some cleanup and a couple of new
  devices but the biggest change was converting most of the drivers to
  use asynchronous probe. This allows us to ramp up multiple regulators
  in parallel during boot which can have a noticable impact on modern
  systems.

  Summary:

   - Update of drivers to PROBE_PREFER_ASYNCHRONOUS to mitigate issues
     with ramp times slowing down boots.

   - Convert to void remove callbacks.

   - Support for voltage monitoring on DA9063

   - Support for Qualcomm PMC8180 and PMM8654au, Richtek RT4803 and
     RT5739, Rockchip RK860x"

* tag 'regulator-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (46 commits)
  regulator: dt-bindings: qcom,rpmh: Combine PM6150L and PM8150L if-then
  regulator: core: Make regulator_lock_two() logic easier to follow
  regulator: dt-bindings: qcom,rpmh: Correct PM8550 family supplies
  regulator: stm32-pwr: fix of_iomap leak
  dt-bindings: mfd: dlg,da9063: document voltage monitoring
  regulator: da9063: implement setter for voltage monitoring
  regulator: da9063: add voltage monitoring registers
  regulator: fan53555: Add support for RK860X
  regulator: fan53555: Use dev_err_probe
  regulator: fan53555: Improve vsel_mask computation
  regulator: fan53555: Make use of the bit macros
  regulator: fan53555: Remove unused *_SLEW_SHIFT definitions
  regulator: dt-bindings: fcs,fan53555: Add support for RK860X
  regulator: qcom_smd: Add MP5496 S1 regulator
  regulator: qcom_smd: Add s1 sub-node to mp5496 regulator
  regulator: qcom,rpmh: add compatible for pmm8654au RPMH
  regulator: qcom-rpmh: add support for pmm8654au regulators
  regulator: core: Avoid lockdep reports when resolving supplies
  regulator: core: Consistently set mutex_owner when using ww_mutex_lock_slow()
  regulator: dt-bindings: qcom,rpmh: Add compatible for PMC8180
  ...

Pull regmap updates from Mark Brown:
 "This is a much bigger change for regmap than is normal, the main
  things being the addition of some KUnit coverage and a maple tree
  based register cache which longer term is likely to replace the rbtree
  cache except possibly for very small register maps.

  While it's complete overkill for most applications the code for maple
  trees is there and there are some larger, sparser devices where the
  data structure is a better fit.

  The maple tree support is still a work in progress but already useful,
  there's some conversions of drivers ready to go after the merge
  window.

  Summary:

   - Support for shifting register addresses up as well as down, there's
     a use cases with memory mapped MDIO.

   - Refactoring of the type configuration in regmap-irq to allow access
     to driver data in the handler, needed by some GPIO devices.

   - Some initial KUnit coverage, the bulk of the driver facing API is
     covered but there's holes and things like the data marshalling for
     bytestream buses are just not covered in the slightest.

   - Removal of the compressed cache type, it had zero users and was
     getting in the way of KUnit.

   - Addition of a maple tree based register cache, there's more work to
     do but it's already useful for some devices with a flatter data
     structure than rbtree and getting to use all the optimisation work
     Liam is doing"

* tag 'regmap-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: allow upshifting register addresses before performing operations
  regmap: Pass irq_drv_data as a parameter for set_type_config()
  regmap: Use mas_walk() instead of mas_find()
  regmap: Fix double unlock in the maple cache
  regmap: Add maple tree based register cache
  regmap: Factor out single value register syncing
  regmap: Add some basic kunit tests
  regmap: Add RAM backed register map
  regmap: Removed compressed cache support
  regmap: Support paging for buses with reg_read()/reg_write()
  regmap: Clarify error for unknown cache types
  regmap: Handle sparse caches in the default sync
  regmap: add a helper to translate the register address
  regmap: cache: Silence checkpatch warning
  regmap: cache: Return error in cache sync operations for REGCACHE_NONE
  regmap-irq: Place kernel doc of struct regmap_irq_chip in order
  regmap-irq: Add no_status support
  regmap: sdw: Remove 8-bit value size restriction
  regmap: sdw: Update misleading comment

Merge tag 'platform-drivers-x86-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates from Hans de Goede:

 -  AMD PMC and PMF drivers:
    - Numerous bugfixes

 -  Intel Speed Select Technology (ISST):
    - TPMI (Topology Aware Register and PM Capsule Interface) support
      for ISST support on upcoming processor models
    - Various other improvements / new hw support
    - tools/intel-speed-select: TPMI support + other improvements

 -  Intel In Field Scan (IFS):
    - Add Array Bist test support

 -  New drivers:
    - intel_bytcrc_pwrsrc Crystal Cove PMIC pwrsrc / reset-reason driver
    - lenovo-ymc Yoga Mode Control driver for reporting SW_TABLET_MODE
    - msi-ec Driver for MSI laptop EC features like battery charging limits

 -  apple-gmux:
    - Support for new MMIO based models (T2 Macs)
    - Honor acpi_backlight= auto-detect-code + kernel cmdline option
      to switch between gmux and apple_bl backlight drivers and remove
      own custom handling for this

 -  x86-android-tablets: Refactor / cleanup + new hw support

 -  Miscellaneous other cleanups / fixes

* tag 'platform-drivers-x86-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (178 commits)
  platform/x86: x86-android-tablets: Add accelerometer support for Yoga Tablet 2 1050/830 series
  platform/x86: x86-android-tablets: Add "yogabook-touch-kbd-digitizer-switch" pdev for Lenovo Yoga Book
  platform/x86: x86-android-tablets: Add Wacom digitizer info for Lenovo Yoga Book
  platform/x86: x86-android-tablets: Update Yoga Book HiDeep touchscreen comment
  platform/x86: thinkpad_acpi: Fix Embedded Controller access on X380 Yoga
  platform/x86/intel/sdsi: Change mailbox timeout
  platform/x86/intel/pmt: Ignore uninitialized entries
  platform/x86: amd: pmc: provide user message where s0ix is not supported
  platform/x86/amd: pmc: Fix memory leak in amd_pmc_stb_debugfs_open_v2()
  mlxbf-bootctl: Add sysfs file for BlueField boot fifo
  platform/x86: amd: pmc: Remove __maybe_unused from amd_pmc_suspend_handler()
  platform/x86/intel/pmc/mtl: Put GNA/IPU/VPU devices in D3
  platform/x86/amd: pmc: Move out of BIOS SMN pair for STB init
  platform/x86/amd: pmc: Utilize SMN index 0 for driver probe
  platform/x86/amd: pmc: Move idlemask check into `amd_pmc_idlemask_read`
  platform/x86/amd: pmc: Don't dump data after resume from s0i3 on picasso
  platform/x86/amd: pmc: Hide SMU version and program attributes for Picasso
  platform/x86/amd: pmc: Don't try to read SMU version on Picasso
  platform/x86/amd/pmf: Move out of BIOS SMN pair for driver probe
  platform/x86: intel-uncore-freq: Add client processors
  ...

Merge tag 'tag-chrome-platform-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Tzung-Bi Shih:
 "Improvements:

   - Replace fake flexible arrays with flexible-array member

  Misc:

   - Minor cleanups and fixes"

* tag 'tag-chrome-platform-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: wilco_ec: remove return value check of debugfs_create_dir()
  platform/chrome: cros_ec_debugfs: fix kernel-doc warning
  platform/chrome: cros_ec: Separate logic for getting panic info
  platform/chrome: cros_typec_switch: Add missing fwnode_handle_put()
  platform/chrome: cros_ec: remove unneeded label and if-condition
  platform/chrome: Replace fake flexible arrays with flexible-array member

Pull media updates from Mauro Carvalho Chehab:

 - Removal of some old unused sensor drivers: ad9389b, m5mols, mt9m032,
   mt9t001, noon010pc30, s5k6aa, sr030pc30 and vs6624

 - New i.MX8 image sensor interface driver

 - Some new RC keymaps

 - lots of cleanups at atomisp driver to make it support standard
   features present on other webcam drivers

 - the cx18 and saa7146 now uses VB2

 - lots of cleanups and driver improvements

* tag 'media/v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (460 commits)
  media: ov5670: Fix probe on ACPI
  media: nxp: imx8-isi: Remove 300ms sleep after enabling channel
  media: nxp: imx8-isi: Replace udelay() with fsleep()
  media: nxp: imx8-isi: Drop partial support for i.MX8QM and i.MX8QXP
  media: nxp: Add i.MX8 ISI driver
  media: dt-bindings: media: Add i.MX8 ISI DT bindings
  media: atomisp: gmin_platform: Add Lenovo Ideapad Miix 310 gmin_vars
  media: atomisp: gmin_platform: Make DMI quirks take precedence over the _DSM table
  media: atomisp: Remove struct atomisp_sub_device index field
  media: atomisp: Drop support for streaming from 2 sensors at once
  media: atomisp: Remove atomisp_try_fmt() call from atomisp_set_fmt()
  media: atomisp: Remove unused ATOM_ISP_MAX_WIDTH_TMP and ATOM_ISP_MAX_HEIGHT_TMP
  media: atomisp: Remove snr_mbus_fmt local var from atomisp_try_fmt()
  media: atomisp: Remove custom V4L2_CID_FMT_AUTO control
  media: atomisp: Remove continuous mode related code from atomisp_set_fmt()
  media: atomisp: Remove duplicate atomisp_[start|stop]_streaming() prototypes
  media: atomisp: gc0310: Switch over to ACPI powermanagement
  media: atomisp: gc0310: Use devm_kzalloc() for data struct
  media: atomisp: gc0310: Add runtime-pm support
  media: atomisp: gc0310: Delay power-on till streaming is started
  ...

Pull drm updates from Dave Airlie:
 "There is a new Qualcomm accel driver for their QAIC, dma-fence got a
  deadline feature added, lots of refactoring around fbdev emulation,
  and the usual pre-release hw enablements from AMD and Intel and fixes
  everywhere.

  New drivers:
   - add QAIC acceleration driver

  dma-buf:
   - constify kobj_type structs
   - Reject prime DMA-Buf attachment if get_sg_table is missing.

  fbdev:
   - cmdline parser fixes
   - implement fbdev emulation for GEM DMA drivers
   - always use shadow buffer in fbdev emulation helpers

  dma-fence:
   - add deadline hint to fences
   - signal private stub fence

  core:
   - improve DisplayID 2.0 and EDID parsing
   - add gem eviction function + callback
   - prep to convert shmem helper to GEM resv lock
   - move suballocator from radeon/amdgpu to core for Xe
   - HPD polling fixes
   - Documentation improvements
   - Add atomic enable_plane callback
   - use tgid instead of pid for client tracking
   - DP: Add SDP Error Detection Configuration Register
   - Add prime import/export to vram-helper
   - use pci aperture helpers in more drivers

  panel:
   - Radxa 8/10HD support
   - Samsung AMD495QA01 support
   - Elida KD50T048A
   - Sony TD4353
   - Novatek NT36523
   - STARRY 2081101QFH032011-53G
   - B133UAN01.0
   - AUO NE135FBM-N41

  i915:
   - More MTL enabling
   - fix s/r problems with MEI/PXP
   - Implement fb_dirty for PSR,FBC,DRRS fixes
   - Fix eDP+DSI dual panel systems
   - Fix issue #6333: "list_add corruption" and full system lockup from
     performance monitoring
   - Don't use stolen memory or BAR for ring buffers on LLC platforms
   - Make sure DSM size has correct 1MiB granularity on Gen12+
   - Whitelist COMMON_SLICE_CHICKEN3 for UMD access on Gen12+
   - Add engine TLB invalidation for Meteorlake
   - Fix GSC races on driver load/unload on Meteorlake+
   - Make kobj_type structures constant
   - Move fd_install after last use of fence
   - wm/vblank refactoring
   - display code refactoring
   - Create GSC submission targeting HDCP and PXP usages on MTL+
   - Enable HDCP2.x via GSC CS
   - Fix context runtime accounting on sysfs fdinfo for heavy workloads
   - Use i915 instead of dev_priv insied the file_priv structure
   - Replace fake flex-array with flexible-array member

  amdgpu:
   - Make kobj structures const
   - Generalize dmabuf import to work with KFD
   - Add capped/uncapped workload handling for supported APUs
   - Expose additional memory stats via fdinfo
   - Register vga_switcheroo for apple-gmux
   - Initial NBIO7.9, GC 9.4.3, GFXHUB 1.2, MMHUB 1.8 support
   - Initial DC FAM infrastructure
   - Link DC backlight to connector device rather than PCI device
   - Add sysfs nodes for secondary VCN clocks

  amdkfd:
   - Make kobj structures const
   - Support for exporting buffers via dmabuf
   - Multi-VMA page migration fixes
   - initial GC 9.4.3 support

  radeon:
   - iMac fix
   - convert to client based fbdev emulation

  habanalabs:
   - Add opcodes to the CS ioctl to allow user to stall/resume specific
     engines inside Gaudi2.
   - INFO ioctl the amount of device memory that the driver and f/w
     reserve for themselves.
   - INFO ioctl a bit-mask of the available rotator engines
   - INFO ioctl the register's address of the f/w that should be used to
     trigger interrupts
   - INFO ioctl two new opcodes to fetch information on h/w and f/w
     events
   - Enable graceful reset mechanism for compute-reset.
   - Align to the latest firmware specs.
   - Enforce the release order of the compute device and dma-buf.

  msm:
   - UBWC decoder programming rework
   - SM8550, SM8450 bindings update
   - uapi C++ fix
   - a3xx and a4xx devfreq support
   - GPU and GEM updates to avoid allocations which could trigger
     reclaim (shrinker) in fence signaling path
   - dma-fence deadline hint support and wait-boost
   - a640/650 speed bin support

  cirrus:
   - convert to regular atomic helpers
   - add damage clipping

  mediatek:
   - 10-bit overlay support
   - mt8195 support
   - Only trigger DRM HPD events if bridge is attached
   - Change the aux retries times when receiving AUX_DEFER

  rockchip:
   - add 4K support

  vc4:
   - use drm_gem_objects

  virtio:
   - allow KMS support to be disabled
   - add damage clipping

  vmwgfx:
   - buffer object lifetime fixes

  exynos:
   - move MIPI DSI driver to drm bridge for iMX sharing
   - use kernel fbdev emulation

  panfrost:
   - add support for mali MT81xx devices
   - add speed binning support

  lima:
   - add usage stats

  tegra:
   - fbdev client conversion

  vkms:
   - Add primary plane positioning support"

* tag 'drm-next-2023-04-24' of git://anongit.freedesktop.org/drm/drm: (1495 commits)
  drm/i915/dp_mst: Fix active port PLL selection for secondary MST streams
  drm/exynos: Implement fbdev emulation as in-kernel client
  drm/exynos: Initialize fbdev DRM client
  drm/exynos: Remove fb_helper from struct exynos_drm_private
  drm/exynos: Remove struct exynos_drm_fbdev
  drm/exynos: Remove exynos_gem from struct exynos_drm_fbdev
  drm/i915: Fix memory leaks in i915 selftests
  drm/i915: Make intel_get_crtc_new_encoder() less oopsy
  drm/i915/gt: Avoid out-of-bounds access when loading HuC
  drm/amdgpu: add some basic elements for multiple XCD case
  drm/amdgpu: move vmhub out of amdgpu_ring_funcs (v4)
  Revert "drm/amdgpu: enable ras for mp0 v13_0_10 on SRIOV"
  drm/amdgpu: add common ip block for GC 9.4.3
  drm/amd/display: Add logging when DP link training Clock recovery is Successful
  drm/amdgpu: add common early init support for GC 9.4.3
  drm/amdgpu: switch to v9_4_3 gfx_funcs callbacks for GC 9.4.3
  drm/amd/display: Add logging when setting DP sink power state fails
  drm/amdkfd: Add gfx_target_version for GC 9.4.3
  drm/amdkfd: Enable HW_UPDATE_RPTR on GC 9.4.3
  drm/amdgpu: reserve the old gc_11_0_*_mes.bin
  ...