Cleanup whitespace and code style. Remove unused #includes and prototypes.
Remove obsolete, redundant or misleading comments. Remove dead code and
redundant initialisers.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

Add the missing mac video modes for the Portrait and 12" RGB displays. The
specs come from the Mac LC III developer note.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

The valkyriefb driver needs the CUDA to work in order to set the video
mode at boot. So initialise the device earlier, and bring the m68k code
closer to the powermac code.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

Valkyriefb and macfb will adopt the same card if they get the chance, so
remove valkyrie support from macfb. Also fix the "valkyriefb: can't do
832x624x8" problem reported by Raylynn Knight some time ago, by adding
vmode 13 support for CONFIG_MAC. Also add vmode 11 since that works too.
Make use of the monitor sense lines on 68k Macs too. Also some cleanups.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

The valkyriefb driver assumes that this logic holds:

mac_vmode_to_var(X, cmode, &var);
mac_var_to_vmode(&var, &vmode, &cmode);
assert(vmode == X);

But it doesn't hold because mac_var_to_vmode() can return a mode with a
slower pixel clock, even when a match is available. So we end up with this
failure:

using video mode 11 and color mode 0.
valkyriefb: vmode 12 not valid.
valkyriefb: can't set default video mode
valkyriefb: vmode 12 not valid.

Rather than have mac_var_to_mode() return the first reasonable mode it
finds, have it return the mode that is closest to the requested one (or
the mode with the closest longer pixel clock period if there is no exact
match).
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

Move platform device code from the drivers to the platform init function.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

Move platform device code from the driver to the platform init function.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

Remove the old 68k Mac serial port code and a lot of related cruft. Add
new SCC platform devices to mac 68k platform.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

Add platform driver support to the pmac-zilog driver, for m68k macs.
Place the powermac-specific code inside #ifdef CONFIG_PPC_PMAC.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

Whitespace cleanups and comment typo fix.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

Adjust the platform device code to conform with the code style used in the
rest of this patch series. No need to name resources nor to register
devices which are not applicable.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

Cleanup whitespace and comments. Remove some dead code.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

After commit e0c09786 ("ataflop: remove
buggy/commented-out IRQ disable from do_fd_request()") the `flags' variable
became unused:

drivers/block/ataflop.c:1473: warning: unused variable 'flags'

Hence remove it.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d
but is perhaps more readable.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@haskernel@
@@

@depends on haskernel@
expression x,__divisor;
@@

- (((x) + ((__divisor) / 2)) / (__divisor))
+ DIV_ROUND_CLOSEST(x,__divisor)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

Trivial patch which adds the __init macro to the module_init
function and all of its helper functions of drivers/char/vme_scc.c
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

Remove the comments referring to a function map_chunk that no longer exists.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

The test in __ioremap to reject memory ranges crossing the 0 boundary
rejects also memory ranges ending at the end of the memory.  Fix that.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

Make asm/swab.h compatible with ColdFire ISA_B CPUs.
Signed-off-by: Maxim Kuvyrkov <maxim@codesourcery.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM / Hibernate: Fix preallocating of memory
  PM / Hibernate: Remove swsusp.c finally
  PM / Hibernate: Remove trailing space in message
  PM: Allow SCSI devices to suspend/resume asynchronously
  PM: Allow USB devices to suspend/resume asynchronously
  USB: implement non-tree resume ordering constraints for PCI host controllers
  PM: Allow PCI devices to suspend/resume asynchronously
  PM / Hibernate: Swap, remove useless check from swsusp_read()
  PM / Hibernate: Really deprecate deprecated user ioctls
  PM: Allow device drivers to use dpm_wait()
  PM: Start asynchronous resume threads upfront
  PM: Add facility for advanced testing of async suspend/resume
  PM: Add a switch for disabling/enabling asynchronous suspend/resume
  PM: Asynchronous suspend and resume of devices
  PM: Add parent information to timing messages
  PM: Document device power attributes in sysfs
  PM / Runtime: Add sysfs switch for disabling device run-time PM

There's currently an open Ubuntu bug[0], with the intent to compile NFS_FSCACHE
(and possibly AFS_FSCACHE, 9P_FSCACHE) into the standard Ubuntu kernel.
However, since *_FSCACHE still depends on EXPERIMENTAL, this won't happen.

As Arjan van de Ven pointed out[1], the EXPERIMENTAL flag doesn't mean that
much any more, I propose the following patch to fs/nfs/Kconfig.  I'd do the
same for fs/9p/Kconfig and fs/afs/Kconfig, but as I did not test 9p or AFS, I
feel it would not be appropriate for me to remove the flag.

[0] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/440522/comments/5
[1] http://lkml.org/lkml/2010/1/23/145Signed-off-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86:
  toshiba_acpi: Add full hotkey support
  hp-wmi: Add support for tablet rotation key
  dell-laptop: Add another Dell laptop to the DMI whitelist
  classmate-laptop: use a single MODULE_DEVICE_TABLE to get correct aliases
  dell-laptop: Pay attention to which devices the hardware switch controls
  dell-laptop: Use buffer with 32-bit physical address
  dell-laptop: Blacklist machines not supporting dell-laptop
  dell-laptop: Block software state changes when rfkill hard blocked
  dell-laptop: Fix small memory leak
  dell-laptop: Fix platform device unregistration
  dell-laptop: Update rfkill state on kill switch
  compal-laptop: Replace sysfs support with rfkill support
  compal-laptop: Add support for known Compal made Dell laptops
  MAINTAINERS: update drivers/platform/x86 information

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: use bastmode in debugfs output
  dlm: Send lockspace name with uevents
  dlm: send reply before bast
  dlm: fix ordering of bast and cast

* 'for-linus' of git://oss.sgi.com/xfs/xfs: (52 commits)
  fs/xfs: Correct NULL test
  xfs: optimize log flushing in xfs_fsync
  xfs: only clear the suid bit once in xfs_write
  xfs: kill xfs_bawrite
  xfs: log changed inodes instead of writing them synchronously
  xfs: remove invalid barrier optimization from xfs_fsync
  xfs: kill the unused XFS_QMOPT_* flush flags V2
  xfs: Use delay write promotion for dquot flushing
  xfs: Sort delayed write buffers before dispatch
  xfs: Don't issue buffer IO direct from AIL push V2
  xfs: Use delayed write for inodes rather than async V2
  xfs: Make inode reclaim states explicit
  xfs: more reserved blocks fixups
  xfs: turn off sign warnings
  xfs: don't hold onto reserved blocks on remount,ro
  xfs: quota limit statvfs available blocks
  xfs: replace KM_LARGE with explicit vmalloc use
  xfs: cleanup up xfs_log_force calling conventions
  xfs: kill XLOG_VEC_SET_TYPE
  xfs: remove duplicate buffer flags
  ...

* 'ibft-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft-2.6:
  ibft: Update MAINTAINERS file.
  drivers/firmware/iscsi_ibft.c: remove NIPQUAD_FMT, use %pI4

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (362 commits)
  V4L-DVB: cx88-dvb: remove extra attribution for core
  V4L/DVB: v4l: soc_camera: fix bound checking of mbus_fmt[] index
  V4L/DVB: Add support for SMT7020 to cx88
  V4L/DVB: radio-si470x: Use UTF-8 encoding on a comment
  V4L/DVB: MAINTAINERS: Telegent tlg2300 section fix
  V4L/DVB: gspca_stv06xx: Add support for camera button
  V4L/DVB: gspca_ov519: add support for the button on ov511 based cams
  V4L/DVB: gspca_ov519: Add support for the button on ov518 based cams
  V4L/DVB: gspca_ov519: add support for the button on ov519 based cams
  V4L/DVB: gspca_main: Fix a compile error when CONFIG_INPUT is not set
  V4L/DVB: gspca_main: some input error handling fixes
  V4L/DVB: gspca_main: Allow use of input device creation code for non int. inputs
  V4L/DVB: gspca_pac7302: much improved exposure control
  V4L/DVB: gspca_sonixb: Make sonixb driver handle pas106 and pas202 cameras
  V4L/DVB: gspca_sonixb: pas106: fixup bright ctrl and add gain and exposure ctrls
  V4L/DVB: Documentation: gspca.txt: update known mr97310a cams
  V4L/DVB: gspca_mr97310a: add support for the Sakar 1638x CyberPix
  V4L/DVB: gscpa_sonixb: limit ov7630 max framerate at 640x480
  V4L/DVB: gspca_sonixb: pas202: fixup brightness ctrl and add gain and exposure ctrls
  V4L/DVB: gscpa_sonixb: Differentiate between sensors with a coarse and fine expo ctrl
  ...

ULE (Unidirectional Lightweight Encapsulation RFC 4326) decapsulation
has a bug that causes endless loop when Payload Pointer of MPEG2-TS
frame is 182 or 183.  Anyone who sends malicious MPEG2-TS frame will
cause the receiver of ULE SNDU to go into endless loop.

This patch was generated and tested against linux-2.6.32.9 and should
apply cleanly to linux-2.6.33 as well because there was only one typo
fix to dvb_net.c since v2.6.32.

This bug was brought to you by modern day Santa Claus who decided to
shower the satellite dish at Keio University with heavy snow causing
huge burst of errors.  We, receiver end, received Santa Claus's gift in
the form of kernel bug.

Care has been taken not to introduce more bug by fixing this bug, but
please scrutinize the code for I always produces buggy code.
Signed-off-by: Ang Way Chuang <wcang79@gmail.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'kmemcheck-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6

* 'kmemcheck-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  kmemcheck: Test the full object in kmemcheck_is_obj_initialized()

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/xfs-vipt:
  xfs: fix xfs to work with Virtually Indexed architectures
  sh: add mm API for DMA to vmalloc/vmap areas
  arm: add mm API for DMA to vmalloc/vmap areas
  parisc: add mm API for DMA to vmalloc/vmap areas
  mm: add coherence API for DMA to vmalloc/vmap areas

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (158 commits)
  [SCSI] Fix printing of failed 32-byte commands
  [SCSI] Fix printing of variable length commands
  [SCSI] libsrp: fix bug in ADDITIONAL CDB LENGTH interpretation
  [SCSI] scsi_dh_alua: Add IBM Power Virtual SCSI ALUA device to dev list
  [SCSI] scsi_dh_alua: add netapp to dev list
  [SCSI] qla2xxx: Update version number to 8.03.02-k1.
  [SCSI] qla2xxx: EEH: Restore PCI saved state during pci slot reset.
  [SCSI] qla2xxx: Add firmware ETS burst support.
  [SCSI] qla2xxx: Correct loop-resync issues during SNS scans.
  [SCSI] qla2xxx: Correct use-after-free issue in terminate_rport_io callback.
  [SCSI] qla2xxx: Correct EH bus-reset handling.
  [SCSI] qla2xxx: Proper clean-up of BSG requests when request times out.
  [SCSI] qla2xxx: Initialize payload receive length in failure path of vendor commands
  [SCSI] fix duplicate removal on error path in scsi_sysfs_add_sdev
  [SCSI] fix refcounting bug in scsi_get_host_dev
  [SCSI] fix memory leak in scsi_report_lun_scan
  [SCSI] lpfc: correct PPC build failure
  [SCSI] raid_class: add raid1e
  [SCSI] mpt2sas: Do not call sas_is_tlr_enabled for RAID volumes.
  [SCSI] zfcp: Introduce header file for qdio structs and inline functions
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (187 commits)
  sh: remove dead LED code for migo-r and ms7724se
  sh: ecovec build fix for CONFIG_I2C=n
  sh: ecovec r-standby support
  sh: ms7724se r-standby support
  sh: SH-Mobile R-standby register save/restore
  clocksource: Fix up a registration/IRQ race in the sh drivers.
  sh: ms7724: modify scan_timing for KEYSC
  sh: ms7724: Add sh_sir support
  sh: mach-ecovec24: Add sh_sir support
  sh: wire up SET/GET_UNALIGN_CTL.
  sh: allow alignment fault mode to be configured at kernel boot.
  sh: sh7724: Update FSI/SPU2 clock
  sh: always enable sh7724 vpu_clk and set to 166MHz on Ecovec
  sh: add sh7724 kick callback to clk_div4_table
  sh: introduce struct clk_div4_table
  sh: clock-cpg div4 set_rate() shift fix
  sh: Turn on speculative return for SH7785 and SH7786
  sh: Merge legacy and dynamic PMB modes.
  sh: Use uncached I/O helpers in PMB setup.
  sh: Provide uncached I/O helpers.
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (31 commits)
  crypto: aes_generic - Fix checkpatch errors
  crypto: fcrypt - Fix checkpatch errors
  crypto: ecb - Fix checkpatch errors
  crypto: des_generic - Fix checkpatch errors
  crypto: deflate - Fix checkpatch errors
  crypto: crypto_null - Fix checkpatch errors
  crypto: cipher - Fix checkpatch errors
  crypto: crc32 - Fix checkpatch errors
  crypto: compress - Fix checkpatch errors
  crypto: cast6 - Fix checkpatch errors
  crypto: cast5 - Fix checkpatch errors
  crypto: camellia - Fix checkpatch errors
  crypto: authenc - Fix checkpatch errors
  crypto: api - Fix checkpatch errors
  crypto: anubis - Fix checkpatch errors
  crypto: algapi - Fix checkpatch errors
  crypto: blowfish - Fix checkpatch errors
  crypto: aead - Fix checkpatch errors
  crypto: ablkcipher - Fix checkpatch errors
  crypto: pcrypt - call the complete function on error
  ...

Provide the right e-mail and names for me and Peter.
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>

Convert netmask to __be32 and format it with %pI4
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Konrad Rzeszutek <ketuzsezr@darnok.org>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: Peter Jones <pjones@redhat.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The hibernate memory preallocation code allocates memory to push some
user space data out of physical RAM, so that the hibernation image is
not too large.  It allocates more memory than necessary for creating
the image, so it has to release some pages to make room for
allocations made while suspending devices and disabling nonboot CPUs,
or the system will hang due to the lack of free pages to allocate
from.  Unfortunately, the function used for freeing these pages,
free_unnecessary_pages(), contains a bug that prevents it from doing
the job on all systems without highmem.

Fix this problem, which is a regression from the 2.6.30 kernel, by
using the right condition for the termination of the loop in
free_unnecessary_pages().
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Alan Jenkins <sourcejedi.lkml@googlemail.com>
Cc: stable@kernel.org

Its contents and entry in Makefile were already removed in
8e60c6a1
(Shift remaining code from swsusp.c to hibernate.c)
but somehow it remained in-place (rjw: which most likely was my
mistake).
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Nigel Cunningham <nigel@tuxonice.net>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

Remove a trailing space from a message in swsusp_save().
Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

Set power.async_suspend for all SCSI devices, targets and hosts, so
that they can be suspended and resumed in parallel with the main
suspend/resume thread and possibly with other devices they don't
depend on in a known way (i.e. devices which are not their parents or
children).

The power.async_suspend flag is also set for devices that don't have
suspend or resume callbacks, because otherwise they would make the
main suspend/resume thread wait for their "asynchronous" children
(during suspend) or parents (during resume), effectively negating the
possible gains from executing these devices' suspend and resume
callbacks asynchronously.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

Set power.async_suspend for USB devices, endpoints and interfaces,
allowing them to be suspended and resumed asynchronously during
system sleep transitions.

The power.async_suspend flag is also set for devices that don't have
suspend or resume callbacks, because otherwise they would make the
main suspend/resume thread wait for their "asynchronous" children
(during suspend) or parents (during resume), effectively negating the
possible gains from executing these devices' suspend and resume
callbacks asynchronously.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

This patch (as1331) adds non-tree ordering constraints needed for
proper resume of PCI USB host controllers from hibernation.  The main
issue is that non-high-speed devices must not be resumed before the
high-speed root hub, because it is the ehci_bus_resume() routine which
takes care of handing the device connection over to the companion
controller.  If the device resume is attempted before the handover
then the device won't be found and it will be treated as though it had
disconnected.

The patch adds a new field to the usb_bus structure; for each
full/low-speed bus this field will contain a pointer to the companion
high-speed bus (if one exists).  It is used during normal device
resume; if the hs_companion pointer isn't NULL then we wait for the
root-hub device on the hs_companion bus.

A secondary issue is that an EHCI controlller shouldn't be resumed
before any of its companions.  On some machines I have observed
handovers failing if the companion controller is reinitialized after
the handover.  Thus, the EHCI resume routine must wait for the
companion controllers to be resumed.

The patch also fixes a small bug in usb_hcd_pci_probe(); an error path
jumps to the wrong label, causing a memory leak.

[rjw: Fixed compilation for CONFIG_PM_SLEEP unset.]
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>