Skip to content

L
linux
Switch branch/tag
  1. 14 Jun, 2012 6 commits
  3. 13 Jun, 2012 9 commits
    • Andiry Xu's avatar
      xHCI: Increase the timeout for controller save/restore state operation · 622eb783
      Andiry Xu authored 
      When system software decides to power down the xHC with the intent of
resuming operation at a later time, it will ask xHC to save the internal
state and restore it when resume to correctly recover from a power event.
Two bits are used to enable this operation: Save State and Restore State.

xHCI spec 4.23.2 says software should "Set the Controller Save/Restore
State flag in the USBCMD register and wait for the Save/Restore State
Status flag in the USBSTS register to transition to '0'". However, it does
not define how long software should wait for the SSS/RSS bit to transition
to 0.

Currently the timeout is set to 1ms. There is bug report
(https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1002697)
indicates that the timeout is too short for ASMedia ASM1042 host controller
to save/restore the state successfully. Increase the timeout to 10ms helps to
resolve the issue.

This patch should be backported to stable kernels as old as 2.6.37, that
contain the commit 5535b1d5 "USB: xHCI:
PCI power management implementation"
Signed-off-by: default avatarAndiry Xu <andiry.xu@gmail.com>
Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Ming Lei <ming.lei@canonical.com>
Cc: stable@vger.kernel.org
      622eb783
    • Takashi Iwai's avatar
      xhci: Don't free endpoints in xhci_mem_cleanup() · 32f1d2c5
      Takashi Iwai authored 
      This patch fixes a few issues introduced in the recent fix
[f8a9e72d: USB: fix resource leak in xhci power loss path]

- The endpoints listed in bw table are just links and each entry is an
 array member of dev->eps[].  But the commit above adds a kfree() call
 to these instances, and thus it results in memory corruption.

- It clears only the first entry of rh_bw[], but there can be multiple
  ports.

- It'd be safer to clear the list_head of ep as well, not only
  removing from the list, as it's checked in
  xhci_discover_or_reset_device().

This patch should be backported to kernels as old as 3.2, that contain
the commit 839c817c "xhci: Store
information about roothubs and TTs."
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
Reviewed-by: default avatarOliver Neukum <oneukum@suse.de>
Cc: <stable@vger.kernel.org>
      32f1d2c5
    • Takashi Iwai's avatar
      xhci: Fix invalid loop check in xhci_free_tt_info() · 46ed8f00
      Takashi Iwai authored 
      xhci_free_tt_info() may access the invalid memory when it removes the
last entry but the list is not empty.  Then tt_next reaches to the
list head but it still tries to check the tt_info of that entry.

This patch fixes the bug and cleans up the messy code by rewriting
with a simple list_for_each_entry_safe().

This patch should be backported to kernels as old as 3.2, that contain
the commit 839c817c "xhci: Store
information about roothubs and TTs."
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
Reviewed-by: default avatarOliver Neukum <oneukum@suse.de>
Cc: <stable@vger.kernel.org>
      46ed8f00
    • Sarah Sharp's avatar
      xhci: Fix error path return value. · e25e62ae
      Sarah Sharp authored 
      This patch fixes an issue discovered by Dan Carpenter:

The patch 3b3db026: "xhci: Add infrastructure for host-specific
LPM policies." from May 9, 2012, leads to the following warning:
drivers/usb/host/xhci.c:3909 xhci_get_timeout_no_hub_lpm()
         warn: signedness bug returning '-22'

  3906          default:
  3907                  dev_warn(&udev->dev, "%s: Can't get timeout for non-U1 or U2 state.\n",
  3908                                  __func__);
  3909                  return -EINVAL;
                        ^^^^^^^^^^^^^^
This should be a u16 like USB3_LPM_DISABLED or something.

  3910          }
  3911
  3912          if (sel <= max_sel_pel && pel <= max_sel_pel)
  3913                  return USB3_LPM_DEVICE_INITIATED;
Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      e25e62ae
    • Dan Carpenter's avatar
      USB: Checking the wrong variable in usb_disable_lpm() · 55558c33
      Dan Carpenter authored 
      We check "u1_params" instead of checking "u2_params".
Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
      55558c33
    • Hans de Goede's avatar
      usb-storage: Add 090c:1000 to unusal-devs · afff07e6
      Hans de Goede authored 
      This device gives a bogus answer to get_capacity(16):
[ 8628.278614] scsi 8:0:0:0: Direct-Access     USB 2.0  USB Flash Drive  1100 PQ: 0 ANSI: 4
[ 8628.279452] sd 8:0:0:0: Attached scsi generic sg4 type 0
[ 8628.280338] sd 8:0:0:0: [sdd] 35747322042253313 512-byte logical blocks: (18.3 EB/15.8 EiB)

So set the quirk flag to avoid using get_capacity(16) with it:
[11731.386014] usb-storage 2-1.6:1.0: Quirks match for vid 090c pid 1000: 80000
[11731.386075] scsi9 : usb-storage 2-1.6:1.0
[11731.386172] usbcore: registered new interface driver usb-storage
[11731.386175] USB Mass Storage support registered.
[11732.387394] scsi 9:0:0:0: Direct-Access     USB 2.0  USB Flash Drive  1100 PQ: 0 ANSI: 4
[11732.388462] sd 9:0:0:0: Attached scsi generic sg3 type 0
[11732.389432] sd 9:0:0:0: [sdc] 7975296 512-byte logical blocks: (4.08 GB/3.80 GiB)

Which makes the capacity look a lot more sane :)
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Tested-by: default avatarSimon Raffeiner <sturmflut@lieberbiber.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      afff07e6
    • Alan Stern's avatar
      USB: serial-generic: use a single set of device IDs · 0b84704a
      Alan Stern authored 
      The usb-serial-generic driver uses different device IDs for its USB
matching and its serial matching.  This can lead to problems: The
driver can end up getting bound to a USB interface without being
allowed to bind to the corresponding serial port.

This patch (as1557) fixes the problem by using the same device ID
table (the one that can be altered by the "vendor=" and "product="
module parameters) for both purposes.  The unused table is removed.
Now the driver will bind only to the intended devices.
Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
CC: Bjørn Mork <bjorn@mork.no>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      0b84704a
    • Bjørn Mork's avatar
      USB: serial: Enforce USB driver and USB serial driver match · 954c3f8a
      Bjørn Mork authored 
      We need to make sure that the USB serial driver we find
matches the USB driver whose probe we are currently
executing. Otherwise we will end up with USB serial
devices bound to the correct serial driver but wrong
USB driver.

An example of such cross-probing, where the usbserial_generic
USB driver has found the sierra serial driver:

May 29 18:26:15 nemi kernel: [ 4442.559246] usbserial_generic 4-4:1.0: Sierra USB modem converter detected
May 29 18:26:20 nemi kernel: [ 4447.556747] usbserial_generic 4-4:1.2: Sierra USB modem converter detected
May 29 18:26:25 nemi kernel: [ 4452.557288] usbserial_generic 4-4:1.3: Sierra USB modem converter detected

sysfs view of the same problem:

bjorn@nemi:~$ ls -l /sys/bus/usb/drivers/sierra/
total 0
--w------- 1 root root 4096 May 29 18:23 bind
lrwxrwxrwx 1 root root    0 May 29 18:23 module -> ../../../../module/usbserial
--w------- 1 root root 4096 May 29 18:23 uevent
--w------- 1 root root 4096 May 29 18:23 unbind
bjorn@nemi:~$ ls -l /sys/bus/usb-serial/drivers/sierra/
total 0
--w------- 1 root root 4096 May 29 18:23 bind
lrwxrwxrwx 1 root root    0 May 29 18:23 module -> ../../../../module/sierra
-rw-r--r-- 1 root root 4096 May 29 18:23 new_id
lrwxrwxrwx 1 root root    0 May 29 18:32 ttyUSB0 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/ttyUSB0
lrwxrwxrwx 1 root root    0 May 29 18:32 ttyUSB1 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.2/ttyUSB1
lrwxrwxrwx 1 root root    0 May 29 18:32 ttyUSB2 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.3/ttyUSB2
--w------- 1 root root 4096 May 29 18:23 uevent
--w------- 1 root root 4096 May 29 18:23 unbind

bjorn@nemi:~$ ls -l /sys/bus/usb/drivers/usbserial_generic/
total 0
lrwxrwxrwx 1 root root    0 May 29 18:33 4-4:1.0 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0
lrwxrwxrwx 1 root root    0 May 29 18:33 4-4:1.2 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.2
lrwxrwxrwx 1 root root    0 May 29 18:33 4-4:1.3 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.3
--w------- 1 root root 4096 May 29 18:33 bind
lrwxrwxrwx 1 root root    0 May 29 18:33 module -> ../../../../module/usbserial
--w------- 1 root root 4096 May 29 18:22 uevent
--w------- 1 root root 4096 May 29 18:33 unbind
bjorn@nemi:~$ ls -l /sys/bus/usb-serial/drivers/generic/
total 0
--w------- 1 root root 4096 May 29 18:33 bind
lrwxrwxrwx 1 root root    0 May 29 18:33 module -> ../../../../module/usbserial
-rw-r--r-- 1 root root 4096 May 29 18:33 new_id
--w------- 1 root root 4096 May 29 18:22 uevent
--w------- 1 root root 4096 May 29 18:33 unbind

So we end up with a mismatch between the USB driver and the
USB serial driver.  The reason for the above is simple: The
USB driver probe will succeed if *any* registered serial
driver matches, and will use that serial driver for all
serial driver functions.

This makes ref counting go wrong. We count the USB driver
as used, but not the USB serial driver.  This may result
in Oops'es as demonstrated by Johan Hovold <jhovold@gmail.com>:

[11811.646396] drivers/usb/serial/usb-serial.c: get_free_serial 1
[11811.646443] drivers/usb/serial/usb-serial.c: get_free_serial - minor base = 0
[11811.646460] drivers/usb/serial/usb-serial.c: usb_serial_probe - registering ttyUSB0
[11811.646766] usb 6-1: pl2303 converter now attached to ttyUSB0
[11812.264197] USB Serial deregistering driver FTDI USB Serial Device
[11812.264865] usbcore: deregistering interface driver ftdi_sio
[11812.282180] USB Serial deregistering driver pl2303
[11812.283141] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
[11812.283272] usbcore: deregistering interface driver pl2303
[11812.301056] USB Serial deregistering driver generic
[11812.301186] usbcore: deregistering interface driver usbserial_generic
[11812.301259] drivers/usb/serial/usb-serial.c: usb_serial_disconnect
[11812.301823] BUG: unable to handle kernel paging request at f8e7438c
[11812.301845] IP: [<f8e38445>] usb_serial_disconnect+0xb5/0x100 [usbserial]
[11812.301871] *pde = 357ef067 *pte = 00000000
[11812.301957] Oops: 0000 [#1] PREEMPT SMP
[11812.301983] Modules linked in: usbserial(-) [last unloaded: pl2303]
[11812.302008]
[11812.302019] Pid: 1323, comm: modprobe Tainted: G        W    3.4.0-rc7+ #101 Dell Inc. Vostro 1520/0T816J
[11812.302115] EIP: 0060:[<f8e38445>] EFLAGS: 00010246 CPU: 1
[11812.302130] EIP is at usb_serial_disconnect+0xb5/0x100 [usbserial]
[11812.302141] EAX: f508a180 EBX: f508a180 ECX: 00000000 EDX: f8e74300
[11812.302151] ESI: f5050800 EDI: 00000001 EBP: f5141e78 ESP: f5141e58
[11812.302160]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[11812.302170] CR0: 8005003b CR2: f8e7438c CR3: 34848000 CR4: 000007d0
[11812.302180] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[11812.302189] DR6: ffff0ff0 DR7: 00000400
[11812.302199] Process modprobe (pid: 1323, ti=f5140000 task=f61e2bc0 task.ti=f5140000)
[11812.302209] Stack:
[11812.302216]  f8e3be0f f8e3b29c f8e3ae00 00000000 f513641c f5136400 f513641c f507a540
[11812.302325]  f5141e98 c133d2c1 00000000 00000000 f509c400 f513641c f507a590 f5136450
[11812.302372]  f5141ea8 c12f0344 f513641c f507a590 f5141ebc c12f0c67 00000000 f507a590
[11812.302419] Call Trace:
[11812.302439]  [<c133d2c1>] usb_unbind_interface+0x51/0x190
[11812.302456]  [<c12f0344>] __device_release_driver+0x64/0xb0
[11812.302469]  [<c12f0c67>] driver_detach+0x97/0xa0
[11812.302483]  [<c12f001c>] bus_remove_driver+0x6c/0xe0
[11812.302500]  [<c145938d>] ? __mutex_unlock_slowpath+0xcd/0x140
[11812.302514]  [<c12f0ff9>] driver_unregister+0x49/0x80
[11812.302528]  [<c1457df6>] ? printk+0x1d/0x1f
[11812.302540]  [<c133c50d>] usb_deregister+0x5d/0xb0
[11812.302557]  [<f8e37c55>] ? usb_serial_deregister+0x45/0x50 [usbserial]
[11812.302575]  [<f8e37c8d>] usb_serial_deregister_drivers+0x2d/0x40 [usbserial]
[11812.302593]  [<f8e3a6e2>] usb_serial_generic_deregister+0x12/0x20 [usbserial]
[11812.302611]  [<f8e3acf0>] usb_serial_exit+0x8/0x32 [usbserial]
[11812.302716]  [<c1080b48>] sys_delete_module+0x158/0x260
[11812.302730]  [<c110594e>] ? mntput+0x1e/0x30
[11812.302746]  [<c145c3c3>] ? sysenter_exit+0xf/0x18
[11812.302746]  [<c107777c>] ? trace_hardirqs_on_caller+0xec/0x170
[11812.302746]  [<c145c390>] sysenter_do_call+0x12/0x36
[11812.302746] Code: 24 02 00 00 e8 dd f3 20 c8 f6 86 74 02 00 00 02 74 b4 8d 86 4c 02 00 00 47 e8 78 55 4b c8 0f b6 43 0e 39 f8 7f a9 8b 53 04 89 d8 <ff> 92 8c 00 00 00 89 d8 e8 0e ff ff ff 8b 45 f0 c7 44 24 04 2f
[11812.302746] EIP: [<f8e38445>] usb_serial_disconnect+0xb5/0x100 [usbserial] SS:ESP 0068:f5141e58
[11812.302746] CR2: 00000000f8e7438c

Fix by only evaluating serial drivers pointing back to the
USB driver we are currently probing.  This still allows two
or more drivers to match the same device, running their
serial driver probes to sort out which one to use.

Cc: stable@vger.kernel.org # 3.0, 3.2, 3.3, 3.4
Signed-off-by: default avatarBjørn Mork <bjorn@mork.no>
Reviewed-by: default avatarFelipe Balbi <balbi@ti.com>
Tested-by: default avatarJohan Hovold <jhovold@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      954c3f8a
    • Alan Stern's avatar
      USB: add NO_D3_DURING_SLEEP flag and revert 151b6128 · c2fb8a3f
      Alan Stern authored 
      This patch (as1558) fixes a problem affecting several ASUS computers:
The machine crashes or corrupts memory when going into suspend if the
ehci-hcd driver is bound to any controllers.  Users have been forced
to unbind or unload ehci-hcd before putting their systems to sleep.

After extensive testing, it was determined that the machines don't
like going into suspend when any EHCI controllers are in the PCI D3
power state.  Presumably this is a firmware bug, but there's nothing
we can do about it except to avoid putting the controllers in D3
during system sleep.

The patch adds a new flag to indicate whether the problem is present,
and avoids changing the controller's power state if the flag is set.
Runtime suspend is unaffected; this matters only for system suspend.
However as a side effect, the controller will not respond to remote
wakeup requests while the system is asleep.  Hence USB wakeup is not
functional -- but of course, this is already true in the current state
of affairs.

A similar patch has already been applied as commit
151b6128 (USB: EHCI: fix crash during
suspend on ASUS computers).  The patch supersedes that one and reverts
it.  There are two differences:

	The old patch added the flag at the USB level; this patch
	adds it at the PCI level.

	The old patch applied to all chipsets with the same vendor,
	subsystem vendor, and product IDs; this patch makes an
	exception for a known-good system (based on DMI information).
Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Tested-by: default avatarDâniel Fraga <fragabr@gmail.com>
Tested-by: default avatarAndrey Rahmatullin <wrar@wrar.name>
Tested-by: default avatarSteven Rostedt <rostedt@goodmis.org>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c2fb8a3f
  5. 12 Jun, 2012 12 commits
  7. 05 Jun, 2012 1 commit
  9. 04 Jun, 2012 12 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7