-Wtype-limits is included in -Wextra which is added at W=1. It warns
(among other things) that 'comparison of an unsigned variable `< 0` is
always false. This causes noisy warnings, especially when used in
macros, hence it is more suitable for W=2.

Link: https://lore.kernel.org/lkml/CAHk-=wiKCXEWKJ9dWUimGbrVRo_N2RosESUw8E7m9AEtyZcu=w@mail.gmail.com/Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'for-5.8/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - A request-based DM fix to not use a waitqueue to wait for blk-mq IO
   completion because doing so is racey.

 - A couple more DM zoned target fixes to address issues introduced
   during the 5.8 cycle.

 - A DM core fix to use proper interface to cleanup DM's static flush
   bio.

 - A DM core fix to prevent mm recursion during memory allocation needed
   by dm_kobject_uevent.

* tag 'for-5.8/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm: use noio when sending kobject event
  dm zoned: Fix zone reclaim trigger
  dm zoned: fix unused but set variable warnings
  dm writecache: reject asynchronous pmem devices
  dm: use bio_uninit instead of bio_disassociate_blkg
  dm: do not use waitqueue for request-based DM

Merge tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull kallsyms fix from Kees Cook:
 "Refactor kallsyms_show_value() users for correct cred.

  I'm not delighted by the timing of getting these changes to you, but
  it does fix a handful of kernel address exposures, and no one has
  screamed yet at the patches.

  Several users of kallsyms_show_value() were performing checks not
  during "open". Refactor everything needed to gain proper checks
  against file->f_cred for modules, kprobes, and bpf"

* tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  selftests: kmod: Add module address visibility test
  bpf: Check correct cred for CAP_SYSLOG in bpf_dump_raw_ok()
  kprobes: Do not expose probe addresses to non-CAP_SYSLOG
  module: Do not expose section addresses to non-CAP_SYSLOG
  module: Refactor section attr into bin attribute
  kallsyms: Refactor kallsyms_show_value() to take cred

Make sure we don't regress the CAP_SYSLOG behavior of the module address
visibility via /proc/modules nor /sys/module/*/sections/*.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>

When evaluating access control over kallsyms visibility, credentials at
open() time need to be used, not the "current" creds (though in BPF's
case, this has likely always been the same). Plumb access to associated
file->f_cred down through bpf_dump_raw_ok() and its callers now that
kallsysm_show_value() has been refactored to take struct cred.

Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: bpf@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 7105e828 ("bpf: allow for correlation of maps and helpers in dump")
Signed-off-by: Kees Cook <keescook@chromium.org>

The kprobe show() functions were using "current"'s creds instead
of the file opener's creds for kallsyms visibility. Fix to use
seq_file->file->f_cred.

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 81365a94 ("kprobes: Show address of kprobes if kallsyms does")
Fixes: ffb9bd68 ("kprobes: Show blacklist addresses as same as kallsyms does")
Signed-off-by: Kees Cook <keescook@chromium.org>

The printing of section addresses in /sys/module/*/sections/* was not
using the correct credentials to evaluate visibility.

Before:

 # cat /sys/module/*/sections/.*text
 0xffffffffc0458000
 ...
 # capsh --drop=CAP_SYSLOG -- -c "cat /sys/module/*/sections/.*text"
 0xffffffffc0458000
 ...

After:

 # cat /sys/module/*/sections/*.text
 0xffffffffc0458000
 ...
 # capsh --drop=CAP_SYSLOG -- -c "cat /sys/module/*/sections/.*text"
 0x0000000000000000
 ...

Additionally replaces the existing (safe) /proc/modules check with
file->f_cred for consistency.
Reported-by: Dominik Czarnota <dominik.czarnota@trailofbits.com>
Fixes: be71eda5 ("module: Fix display of wrong module .text address")
Cc: stable@vger.kernel.org
Tested-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>

In order to gain access to the open file's f_cred for kallsym visibility
permission checks, refactor the module section attributes to use the
bin_attribute instead of attribute interface. Additionally removes the
redundant "name" struct member.

Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>

In order to perform future tests against the cred saved during open(),
switch kallsyms_show_value() to operate on a cred, and have all current
callers pass current_cred(). This makes it very obvious where callers
are checking the wrong credential in their "read" contexts. These will
be fixed in the coming patches.

Additionally switch return value to bool, since it is always used as a
direct permission check, not a 0-on-success, negative-on-error style
function return.

Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>

Update Documentation for the gcc v4.9 upgrade requirement.

Fixes: 5429ef62 ("compiler/gcc: Raise minimum GCC version for kernel builds to 4.8")
Fixes: 6ec4476a ("Raise gcc version requirement to 4.9")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull sound fixes from Takashi Iwai:
 "A collection of small, mostly device-specific fixes.

  The significant one is the regression fix for USB-audio implicit
  feedback devices due to the incorrect frame size calculation, which
  landed in 5.8 and stable trees.

  In addition, a few usual HD-audio and USB-audio quirks, Intel HDMI
  fixes, ASoC fsl and rt5682 fixes, as well as the fix in
  compress-offload partial drain operation"

* tag 'sound-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: compress: fix partial_drain completion state
  ALSA: usb-audio: Add implicit feedback quirk for RTX6001
  ALSA: usb-audio: add quirk for MacroSilicon MS2109
  ALSA: hda/realtek: Enable headset mic of Acer Veriton N4660G with ALC269VC
  ALSA: hda/realtek: Enable headset mic of Acer C20-820 with ALC269VC
  ALSA: hda/realtek - Enable audio jacks of Acer vCopperbox with ALC269VC
  ALSA: hda/realtek - Fix Lenovo Thinkpad X1 Carbon 7th quirk subdevice id
  ALSA: hda/hdmi: improve debug traces for stream lookups
  ALSA: hda/hdmi: fix failures at PCM open on Intel ICL and later
  ALSA: opl3: fix infoleak in opl3
  ALSA: usb-audio: Replace s/frame/packet/ where appropriate
  ALSA: usb-audio: Fix packet size calculation
  AsoC: amd: add missing snd- module prefix to the acp3x-rn driver kernel module
  ALSA: hda - let hs_mic be picked ahead of hp_mic
  ASoC: rt5682: fix the pop noise while OMTP type headset plugin
  ASoC: fsl_mqs: Fix unchecked return value for clk_prepare_enable
  ASoC: fsl_mqs: Don't check clock is NULL before calling clk API

I realize that we fairly recently raised it to 4.8, but the fact is, 4.9
is a much better minimum version to target.

We have a number of workarounds for actual bugs in pre-4.9 gcc versions
(including things like internal compiler errors on ARM), but we also
have some syntactic workarounds for lacking features.

In particular, raising the minimum to 4.9 means that we can now just
assume _Generic() exists, which is likely the much better replacement
for a lot of very convoluted built-time magic with conditionals on
sizeof and/or __builtin_choose_expr() with same_type() etc.

Using _Generic also means that you will need to have a very recent
version of 'sparse', but thats easy to build yourself, and much less of
a hassle than some old gcc version can be.

The latest (in a long string) of reasons for minimum compiler version
upgrades was commit 5435f73d ("efi/x86: Fix build with gcc 4").

Ard points out that RHEL 7 uses gcc-4.8, but the people who stay back on
old RHEL versions persumably also don't build their own kernels anyway.
And maybe they should cross-built or just have a little side affair with
a newer compiler?
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kobject_uevent may allocate memory and it may be called while there are dm
devices suspended. The allocation may recurse into a suspended device,
causing a deadlock. We must set the noio flag when sending a uevent.

The observed deadlock was reported here:
https://www.redhat.com/archives/dm-devel/2020-March/msg00025.htmlReported-by: Khazhismel Kumykov <khazhy@google.com>
Reported-by: Tahsin Erdogan <tahsin@google.com>
Reported-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Only triggering reclaim based on the percentage of unmapped cache
zones can fail to detect cases where reclaim is needed, e.g. if the
target has only 2 or 3 cache zones and only one unmapped cache zone,
the percentage of free cache zones is higher than
DMZ_RECLAIM_LOW_UNMAP_ZONES (30%) and reclaim does not trigger.

This problem, combined with the fact that dmz_schedule_reclaim() is
called from dmz_handle_bio() without the map lock held, leads to a
race between zone allocation and dmz_should_reclaim() result.
Depending on the workload applied, this race can lead to the write
path waiting forever for a free zone without reclaim being triggered.

Fix this by moving dmz_schedule_reclaim() inside dmz_alloc_zone()
under the map lock. This results in checking the need for zone reclaim
whenever a new data or buffer zone needs to be allocated.

Also fix dmz_reclaim_percentage() to always return 0 if the number of
unmapped cache (or random) zones is less than or equal to 1.
Suggested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Fix unused but set variable warnings:

drivers/md/dm-zoned-reclaim.c:504:42: warning:
 variable nr_rnd set but not used [-Wunused-but-set-variable]
  504 |  unsigned int p_unmap, nr_unmap_rnd = 0, nr_rnd = 0;
      |                                          ^~~~~~
drivers/md/dm-zoned-reclaim.c:504:24: warning:
 variable nr_unmap_rnd set but not used [-Wunused-but-set-variable]
  504 |  unsigned int p_unmap, nr_unmap_rnd = 0, nr_rnd = 0;
      |                        ^~~~~~~~~~~~

Fixes: f97809ae ("dm zoned: per-device reclaim")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

DM writecache does not handle asynchronous pmem. Reject it when
supplied as cache.

Link: https://lore.kernel.org/linux-nvdimm/87lfk5hahc.fsf@linux.ibm.com/
Fixes: 6e84200c ("virtio-pmem: Add virtio pmem driver")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # 5.3+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

bio_uninit is the proper API to clean up a BIO that has been allocated
on stack or inside a structure that doesn't come from the BIO allocator.
Switch dm to use that instead of bio_disassociate_blkg, which really is
an implementation detail.  Note that the bio_uninit calls are also moved
to the two callers of __send_empty_flush, so that they better pair with
the bio_init calls used to initialize them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Pull perf tooling fixes from Arnaldo Carvalho de Melo:

 - Intel PT fixes for PEBS-via-PT with registers

 - Fixes for Intel PT python based GUI

 - Avoid duplicated sideband events with Intel PT in system wide tracing

 - Remove needless 'dummy' event from TUI menu, used when synthesizing
   meta data events for pre-existing processes

 - Fix corner case segfault when pressing enter in a screen without
   entries in the TUI for report/top

 - Fixes for time stamp handling in libtraceevent

 - Explicitly set utf-8 encoding in perf flamegraph

 - Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy',
   silencing perf build warning

* tag 'perf-tools-fixes-2020-07-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf report TUI: Remove needless 'dummy' event from menu
  perf intel-pt: Fix PEBS sample for XMM registers
  perf intel-pt: Fix displaying PEBS-via-PT with registers
  perf intel-pt: Fix recording PEBS-via-PT with registers
  perf report TUI: Fix segmentation fault in perf_evsel__hists_browse()
  tools lib traceevent: Add proper KBUFFER_TYPE_TIME_STAMP handling
  tools lib traceevent: Add API to read time information from kbuffer
  perf scripts python: exported-sql-viewer.py: Fix time chart call tree
  perf scripts python: exported-sql-viewer.py: Fix zero id in call tree 'Find' result
  perf scripts python: exported-sql-viewer.py: Fix zero id in call graph 'Find' result
  perf scripts python: exported-sql-viewer.py: Fix unexpanded 'Find' result
  perf record: Fix duplicated sideband events with Intel PT system wide tracing
  perf scripts python: export-to-postgresql.py: Fix struct.pack() int argument
  tools arch: Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy'
  perf flamegraph: Explicitly set utf-8 encoding

Pull MTD fixes from Miquel Raynal:
 "MTD:
   - Set a missing master partition panic write flag

  Raw NAND:
   - Fix build issue in the xway driver
   - Fix a wrong return code"

* tag 'mtd/fixes-for-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: xway: Fix build issue
  mtd: set master partition panic write flag
  nandsim: Fix return code testing of ns_find_operation()

Pull btrfs fixes from David Sterba:

 - regression fix of a leak in global block reserve accounting

 - fix a (hard to hit) race of readahead vs releasepage that could lead
   to crash

 - convert all remaining uses of comment fall through annotations to the
   pseudo keyword

 - fix crash when mounting a fuzzed image with -o recovery

* tag 'for-5.8-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: reset tree root pointer after error in init_tree_roots
  btrfs: fix reclaim_size counter leak after stealing from global reserve
  btrfs: fix fatal extent_buffer readahead vs releasepage race
  btrfs: convert comments to fallthrough annotations

Pull ARC fixes from Vineet Gupta:

 - User build systems to pass -mcpu

 - Fix potential EFA clobber in syscall handler

 - Fix ARCompact 2 levels of interrupts build

 - Detect newer HS CPU releases

 - misc other fixes

* tag 'arc-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARCv2: support loop buffer (LPB) disabling
  ARC: build: remove deprecated toggle for arc700 builds
  ARC: build: allow users to specify -mcpu
  ARCv2: boot log: detect newer/upconing HS3x/HS4x releases
  ARC: elf: use right ELF_ARCH
  ARC: [arcompact] fix bitrot with 2 levels of interrupt
  ARC: entry: fix potential EFA clobber when TIF_SYSCALL_TRACE

Pull tpm fix from Jarkko Sakkinen:
 "Revert commit e918e570 ("tpm_tis: Remove the HID IFX0102").

  Removing IFX0102 from tpm_tis was not a right move because both
  tpm_tis and tpm_infineon use the same device ID.

  A real fix requires quirks added to both drivers. It can probably wait
  until v5.9 as the bug has existed since 2006"

* tag 'tpmdd-next-v5.8-rc5' of git://git.infradead.org/users/jjs/linux-tpmdd:
  Revert commit e918e570 ("tpm_tis: Remove the HID IFX0102")

This MIPS driver does not support COMPILE_TEST yet and failed to build
under my radar.

Replace 'mtd' chich is not defined in the scope of xway_nand_remove()
by nand_to_mtd(chip). The mistake has been added in the long series
dropping nand_release().

Tested with a 7.3.0 MIPS GCC toolchain built with Buildroot.

Fixes: 9fdd78f7 ("mtd: rawnand: xway: Stop using nand_release()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200626065511.16424-1-miquel.raynal@bootlin.com

Given request-based DM now uses blk-mq's blk_mq_queue_inflight() to
determine if outstanding IO has completed (and DM has no control over
the blk-mq state machine used to track outstanding IO) it is unsafe to
wakeup waiter (dm_wait_for_completion) before blk-mq has cleared a
request's state bits (e.g. MQ_RQ_IN_FLIGHT or MQ_RQ_COMPLETE).  As
such dm_wait_for_completion() could be left to wait indefinitely if no
other requests complete.

Fix this by eliminating request-based DM's use of waitqueue to wait
for blk-mq requests to complete in dm_wait_for_completion.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Depends-on: 3c94d83c ("blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight()")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

On partial_drain completion we should be in SNDRV_PCM_STATE_RUNNING
state, so set that for partially draining streams in
snd_compr_drain_notify() and use a flag for partially draining streams

While at it, add locks for stream state change in
snd_compr_drain_notify() as well.

Fixes: f44f2a54 ("ALSA: compress: fix drain calls blocking other compress functions (v6)")
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200629134737.105993-4-vkoul@kernel.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

USB Audio analyzer RTX6001 uses the same implicit feedback quirk
as other XMOS-based devices.
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Tested-by: Pavel Hofman <pavel.hofman@ivitera.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/822f0f20-1886-6884-a6b2-d11c685cbafa@ivitera.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

These devices claim to be 96kHz mono, but actually are 48kHz stereo with
swapped channels and unaligned transfers.

Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20200702071433.237843-1-marcan@marcan.stSigned-off-by: Takashi Iwai <tiwai@suse.de>

The Acer Veriton N4660G desktop's audio (1025:1248) with ALC269VC cannot
detect the headset microphone until ALC269VC_FIXUP_ACER_MIC_NO_PRESENCE
quirk maps the NID 0x18 as the headset mic pin.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200706071826.39726-3-jian-hong@endlessm.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The Acer Aspire C20-820 AIO's audio (1025:1065) with ALC269VC can't
detect the headset microphone until ALC269VC_FIXUP_ACER_HEADSET_MIC
quirk maps the NID 0x18 as the headset mic pin.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200706071826.39726-2-jian-hong@endlessm.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The Acer desktop vCopperbox with ALC269VC cannot detect the MIC of
headset, the line out and internal speaker until
ALC269VC_FIXUP_ACER_VCOPPERBOX_PINS quirk applied.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200706071826.39726-1-jian-hong@endlessm.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

1)
In snd_hda_pick_fixup(), quirks are first matched by PCI SSID and then, if
there is no match, by codec SSID. The Lenovo "ThinkPad X1 Carbon 7th" has
an audio chip with PCI SSID 0x2292 and codec SSID 0x2293[1]. Therefore, fix
the quirk meant for that device to match on .subdevice == 0x2292.

2)
The "Thinkpad X1 Yoga 7th" does not exist. The companion product to the
Carbon 7th is the Yoga 4th. That device has an audio chip with PCI SSID
0x2292 and codec SSID 0x2292[2]. Given the behavior of
snd_hda_pick_fixup(), it is not possible to have a separate quirk for the
Yoga based on SSID. Therefore, merge the quirks meant for the Carbon and
Yoga. This preserves the current behavior for the Yoga.

[1] This is the case on my own machine and can also be checked here
https://github.com/linuxhw/LsPCI/tree/master/Notebook/Lenovo/ThinkPad
https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3225701
[2]
https://github.com/linuxhw/LsPCI/tree/master/Convertible/Lenovo/ThinkPad
https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3176355

Fixes: d2cd795c ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen")
Fixes: 54a6a7dc ("ALSA: hda/realtek - Add quirk for the bass speaker on Lenovo Yoga X1 7th gen")
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Kailang Yang <kailang@realtek.com>
Tested-by: Vincent Bernat <vincent@bernat.ch>
Tested-by: Even Brenden <evenbrenden@gmail.com>
Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200703080005.8942-2-benjamin.poirier@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The HDMI codec driver has two debug traces printed from different
functions but with identical message content:

"HDMI: hinfo 000000006a6b84d9 not registered"

Fix this duplication and also add a bit more context in addition to raw
object pointer, to help analysis of kernel logs.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200703153818.2808592-2-kai.vehmanen@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

When HDMI PCM devices are opened in a specific order, with at least one
HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the
connected monitor, on recent Intel platforms (ICL/JSL and newer). While
this is not a typical sequence, at least Pulseaudio does this every time
when it is started, to discover the available PCMs.

The rootcause is an invalid assumption in hdmi_add_pin(), where the
total number of converters is assumed to be known at the time the
function is called. On older Intel platforms this held true, but after
ICL/JSL, the order how pins and converters are in the subnode list as
returned by snd_hda_get_sub_nodes(), was changed. As a result,
information for some converters was not stored to per_pin->mux_nids.
And this means some pins cannot be connected to all converters, and
application instead gets -EBUSY instead at open.

The assumption that converters are always before pins in the subnode
list, is not really a valid one. Fix the problem in hdmi_parse_codec()
by introducing separate loops for discovering converters and pins.

BugLink: https://github.com/thesofproject/linux/issues/1978
BugLink: https://github.com/thesofproject/linux/issues/2216
BugLink: https://github.com/thesofproject/linux/issues/2217Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The stack object “info” in snd_opl3_ioctl() has a leaking problem.
It has 2 padding bytes which are not initialized and leaked via
“copy_to_user”.
Signed-off-by: xidongwang <wangxidong_97@163.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1594006058-30362-1-git-send-email-wangxidong_97@163.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Removing IFX0102 from tpm_tis was not a right move because both tpm_tis
and tpm_infineon use the same device ID. Revert the commit and add a
remark about a bug caused by commit 93e1b7d4 ("[PATCH] tpm: add HID
module parameter").

Fixes: e918e570 ("tpm_tis: Remove the HID IFX0102")
Reported-by: Peter Huewe <peterhuewe@gmx.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

Pull kvm fixes from Paolo Bonzini:
 "Bugfixes and a one-liner patch to silence a sparse warning"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: arm64: Stop clobbering x0 for HVC_SOFT_RESTART
  KVM: arm64: PMU: Fix per-CPU access in preemptible context
  KVM: VMX: Use KVM_POSSIBLE_CR*_GUEST_BITS to initialize guest/host masks
  KVM: x86: Mark CR4.TSD as being possibly owned by the guest
  KVM: x86: Inject #GP if guest attempts to toggle CR4.LA57 in 64-bit mode
  kvm: use more precise cast and do not drop __user
  KVM: x86: bit 8 of non-leaf PDPEs is not reserved
  KVM: X86: Fix async pf caused null-ptr-deref
  KVM: arm64: vgic-v4: Plug race between non-residency and v4.1 doorbell
  KVM: arm64: pvtime: Ensure task delay accounting is enabled
  KVM: arm64: Fix kvm_reset_vcpu() return code being incorrect with SVE
  KVM: arm64: Annotate hyp NMI-related functions as __always_inline
  KVM: s390: reduce number of IO pins to 1

Pull s390 fixes from Heiko Carstens:

 - Initialize jump labels before early command line parsing in order to
   make init_on_alloc and init_on_free options work

 - Fix vfio-ccw build error due to missing include

 - Prevent callchain data collection with hardware sampling, since the
   callchains simply do not exist

 - Prevent multiple registrations of the same zPCI function

 - Update defconfigs

* tag 's390-5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  vfio-ccw: Fix a build error due to missing include of linux/slab.h
  s390: update defconfigs
  s390/cpum_sf: prohibit callchain data collection
  s390/setup: init jump labels before command line parsing
  s390/maccess: add no DAT mode to kernel_write
  s390/pci: fix enabling a reserved PCI function

Merge tag 'kvmarm-fixes-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master

KVM/arm fixes for 5.8, take #3

- Disable preemption on context-switching PMU EL0 state happening
  on system register trap
- Don't clobber X0 when tearing down KVM via a soft reset (kexec)

Fixing the common case of:

  perf record
  perf report

And getting just the cycles events.

We now have a 'dummy' event to get perf metadata events that take place
while we synthesize metadata records for pre-existing processes by
traversing procfs, so we always have this extra 'dummy' evsel, but we
don't have to offer it as there will be no samples on it, remove this
distraction.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20200706115452.GA2772@redhat.com/Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The condition to add XMM registers was missing, the regs array needed to
be in the outer scope, and the size of the regs array was too small.

Fixes: 143d34a6 ("perf intel-pt: Add XMM registers to synthesized PEBS sample")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Luwei Kang <luwei.kang@intel.com>
Link: http://lore.kernel.org/lkml/20200630133935.11150-4-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>