Skip to content

L
linux
Switch branch/tag
  1. 01 Sep, 2020 1 commit
  3. 31 Aug, 2020 6 commits
    • Grygorii Strashko's avatar
      net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode · c2f89219
      Grygorii Strashko authored 
      In RMII link mode it's required to set bit 15 IFCTL_A in MAC_SL MAC_CONTROL
register to enable support for 100Mbit link speed.

Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: default avatarGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c2f89219
    • Potnuri Bharat Teja's avatar
      cxgb4: fix thermal zone device registration · 6b6382a8
      Potnuri Bharat Teja authored 
      When multiple adapters are present in the system, pci hot-removing second
adapter leads to the following warning as both the adapters registered
thermal zone device with same thermal zone name/type.
Therefore, use unique thermal zone name during thermal zone device
initialization. Also mark thermal zone dev NULL once unregistered.

[  414.370143] ------------[ cut here ]------------
[  414.370944] sysfs group 'power' not found for kobject 'hwmon0'
[  414.371747] WARNING: CPU: 9 PID: 2661 at fs/sysfs/group.c:281
 sysfs_remove_group+0x76/0x80
[  414.382550] CPU: 9 PID: 2661 Comm: bash Not tainted 5.8.0-rc6+ #33
[  414.383593] Hardware name: Supermicro X10SRA-F/X10SRA-F, BIOS 2.0a 06/23/2016
[  414.384669] RIP: 0010:sysfs_remove_group+0x76/0x80
[  414.385738] Code: 48 89 df 5b 5d 41 5c e9 d8 b5 ff ff 48 89 df e8 60 b0 ff ff
 eb cb 49 8b 14 24 48 8b 75 00 48 c7 c7 90 ae 13 bb e8 6a 27 d0 ff <0f> 0b 5b 5d
 41 5c c3 0f 1f 00 0f 1f 44 00 00 48 85 f6 74 31 41 54
[  414.388404] RSP: 0018:ffffa22bc080fcb0 EFLAGS: 00010286
[  414.389638] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[  414.390829] RDX: 0000000000000001 RSI: ffff8ee2de3e9510 RDI: ffff8ee2de3e9510
[  414.392064] RBP: ffffffffbaef2ee0 R08: 0000000000000000 R09: 0000000000000000
[  414.393224] R10: 0000000000000000 R11: 000000002b30006c R12: ffff8ee260720008
[  414.394388] R13: ffff8ee25e0a40e8 R14: ffffa22bc080ff08 R15: ffff8ee2c3be5020
[  414.395661] FS:  00007fd2a7171740(0000) GS:ffff8ee2de200000(0000)
 knlGS:0000000000000000
[  414.396825] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  414.398011] CR2: 00007f178ffe5020 CR3: 000000084c5cc003 CR4: 00000000003606e0
[  414.399172] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  414.400352] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  414.401473] Call Trace:
[  414.402685]  device_del+0x89/0x400
[  414.403819]  device_unregister+0x16/0x60
[  414.405024]  hwmon_device_unregister+0x44/0xa0
[  414.406112]  thermal_remove_hwmon_sysfs+0x196/0x200
[  414.407256]  thermal_zone_device_unregister+0x1b5/0x1f0
[  414.408415]  cxgb4_thermal_remove+0x3c/0x4f [cxgb4]
[  414.409668]  remove_one+0x212/0x290 [cxgb4]
[  414.410875]  pci_device_remove+0x36/0xb0
[  414.412004]  device_release_driver_internal+0xe2/0x1c0
[  414.413276]  pci_stop_bus_device+0x64/0x90
[  414.414433]  pci_stop_and_remove_bus_device_locked+0x16/0x30
[  414.415609]  remove_store+0x75/0x90
[  414.416790]  kernfs_fop_write+0x114/0x1b0
[  414.417930]  vfs_write+0xcf/0x210
[  414.419059]  ksys_write+0xa7/0xe0
[  414.420120]  do_syscall_64+0x4c/0xa0
[  414.421278]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  414.422335] RIP: 0033:0x7fd2a686afd0
[  414.423396] Code: Bad RIP value.
[  414.424549] RSP: 002b:00007fffc1446148 EFLAGS: 00000246 ORIG_RAX:
 0000000000000001
[  414.425638] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fd2a686afd0
[  414.426830] RDX: 0000000000000002 RSI: 00007fd2a7196000 RDI: 0000000000000001
[  414.427927] RBP: 00007fd2a7196000 R08: 000000000000000a R09: 00007fd2a7171740
[  414.428923] R10: 00007fd2a7171740 R11: 0000000000000246 R12: 00007fd2a6b43400
[  414.430082] R13: 0000000000000002 R14: 0000000000000001 R15: 0000000000000000
[  414.431027] irq event stamp: 76300
[  414.435678] ---[ end trace 13865acb4d5ab00f ]---

Fixes: b1871915 ("cxgb4: Add thermal zone support")
Signed-off-by: default avatarPotnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6b6382a8
    • Xie He's avatar
      drivers/net/wan/hdlc_cisco: Add hard_header_len · 1a545ebe
      Xie He authored 
      This driver didn't set hard_header_len. This patch sets hard_header_len
for it according to its header_ops->create function.

This driver's header_ops->create function (cisco_hard_header) creates
a header of (struct hdlc_header), so hard_header_len should be set to
sizeof(struct hdlc_header).

Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: default avatarXie He <xie.he.0141@gmail.com>
Acked-by: default avatarKrzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1a545ebe
    • Shannon Nelson's avatar
      ionic: fix txrx work accounting · 9dda5110
      Shannon Nelson authored 
      Take the tx accounting out of the work_done calculation to
prevent a possible duplicate napi_schedule call when under
high Tx stress but low Rx traffic.

Fixes: b14e4e95 ("ionic: tx separate servicing")
Signed-off-by: default avatarShannon Nelson <snelson@pensando.io>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9dda5110
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf · e9d572d9
      David S. Miller authored 
      Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Do not delete clash entries on reply, let them expire instead,
   from Florian Westphal.

2) Do not report EAGAIN to nfnetlink, otherwise this enters a busy loop.
   Update nfnetlink_unicast() to translate EAGAIN to ENOBUFS.

3) Remove repeated words in code comments, from Randy Dunlap.

4) Several patches for the flowtable selftests, from Fabian Frederick.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e9d572d9
    • Tuong Lien's avatar
      tipc: fix using smp_processor_id() in preemptible · bb8872a1
      Tuong Lien authored 
      The 'this_cpu_ptr()' is used to obtain the AEAD key' TFM on the current
CPU for encryption, however the execution can be preemptible since it's
actually user-space context, so the 'using smp_processor_id() in
preemptible' has been observed.

We fix the issue by using the 'get/put_cpu_ptr()' API which consists of
a 'preempt_disable()' instead.

Fixes: fc1b6d6d ("tipc: introduce TIPC encryption & authentication")
Acked-by: default avatarJon Maloy <jmaloy@redhat.com>
Signed-off-by: default avatarTuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bb8872a1
  5. 29 Aug, 2020 1 commit
    • Florian Westphal's avatar
      netfilter: conntrack: do not auto-delete clash entries on reply · c4617214
      Florian Westphal authored 
      Its possible that we have more than one packet with the same ct tuple
simultaneously, e.g. when an application emits n packets on same UDP
socket from multiple threads.

NAT rules might be applied to those packets. With the right set of rules,
n packets will be mapped to m destinations, where at least two packets end
up with the same destination.

When this happens, the existing clash resolution may merge the skb that
is processed after the first has been received with the identical tuple
already in hash table.

However, its possible that this identical tuple is a NAT_CLASH tuple.
In that case the second skb will be sent, but no reply can be received
since the reply that is processed first removes the NAT_CLASH tuple.

Do not auto-delete, this gives a 1 second window for replies to be passed
back to originator.

Packets that are coming later (udp stream case) will not be affected:
they match the original ct entry, not a NAT_CLASH one.

Also prevent NAT_CLASH entries from getting offloaded.

Fixes: 6a757c07 ("netfilter: conntrack: allow insertion of clashing entries")
Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      c4617214
  7. 28 Aug, 2020 13 commits
  9. 27 Aug, 2020 12 commits
  11. 26 Aug, 2020 7 commits
    • David S. Miller's avatar
      Merge branch 'net-fix-netpoll-crash-with-bnxt' · 5875568a
      David S. Miller authored 
      Jakub Kicinski says:

====================
net: fix netpoll crash with bnxt

Rob run into crashes when using XDP on bnxt. Upon investigation
it turns out that during driver reconfig irq core produces
a warning message when IRQs are requested. This triggers netpoll,
which in turn accesses uninitialized driver state. Same crash can
also be triggered on this platform by changing the number of rings.

Looks like we have two missing pieces here, netif_napi_add() has
to make sure we start out with netpoll blocked. The driver also
has to be more careful about when napi gets enabled.

Tested XDP and channel count changes, the warning message no longer
causes a crash. Not sure if the memory barriers added in patch 1
are necessary, but it seems we should have them.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5875568a
    • Jakub Kicinski's avatar
      bnxt: don't enable NAPI until rings are ready · 96ecdcc9
      Jakub Kicinski authored 
      Netpoll can try to poll napi as soon as napi_enable() is called.
It crashes trying to access a doorbell which is still NULL:

 BUG: kernel NULL pointer dereference, address: 0000000000000000
 CPU: 59 PID: 6039 Comm: ethtool Kdump: loaded Tainted: G S                5.9.0-rc1-00469-g5fd99b5d-dirty #26
 RIP: 0010:bnxt_poll+0x121/0x1c0
 Code: c4 20 44 89 e0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 41 8b 86 a0 01 00 00 41 23 85 18 01 00 00 49 8b 96 a8 01 00 00 0d 00 00 00 24 <89> 02
41 f6 45 77 02 74 cb 49 8b ae d8 01 00 00 31 c0 c7 44 24 1a
  netpoll_poll_dev+0xbd/0x1a0
  __netpoll_send_skb+0x1b2/0x210
  netpoll_send_udp+0x2c9/0x406
  write_ext_msg+0x1d7/0x1f0
  console_unlock+0x23c/0x520
  vprintk_emit+0xe0/0x1d0
  printk+0x58/0x6f
  x86_vector_activate.cold+0xf/0x46
  __irq_domain_activate_irq+0x50/0x80
  __irq_domain_activate_irq+0x32/0x80
  __irq_domain_activate_irq+0x32/0x80
  irq_domain_activate_irq+0x25/0x40
  __setup_irq+0x2d2/0x700
  request_threaded_irq+0xfb/0x160
  __bnxt_open_nic+0x3b1/0x750
  bnxt_open_nic+0x19/0x30
  ethtool_set_channels+0x1ac/0x220
  dev_ethtool+0x11ba/0x2240
  dev_ioctl+0x1cf/0x390
  sock_do_ioctl+0x95/0x130
Reported-by: default avatarRob Sherwood <rsher@fb.com>
Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
Reviewed-by: default avatarMichael Chan <michael.chan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      96ecdcc9
    • Jakub Kicinski's avatar
      net: disable netpoll on fresh napis · 96e97bc0
      Jakub Kicinski authored 
      napi_disable() makes sure to set the NAPI_STATE_NPSVC bit to prevent
netpoll from accessing rings before init is complete. However, the
same is not done for fresh napi instances in netif_napi_add(),
even though we expect NAPI instances to be added as disabled.

This causes crashes during driver reconfiguration (enabling XDP,
changing the channel count) - if there is any printk() after
netif_napi_add() but before napi_enable().

To ensure memory ordering is correct we need to use RCU accessors.
Reported-by: default avatarRob Sherwood <rsher@fb.com>
Fixes: 2d8bff12 ("netpoll: Close race condition between poll_one_napi and napi_disable")
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      96e97bc0
    • Ido Schimmel's avatar
      ipv4: Silence suspicious RCU usage warning · 7f6f32bb
      Ido Schimmel authored 
      fib_info_notify_update() is always called with RTNL held, but not from
an RCU read-side critical section. This leads to the following warning
[1] when the FIB table list is traversed with
hlist_for_each_entry_rcu(), but without a proper lockdep expression.

Since modification of the list is protected by RTNL, silence the warning
by adding a lockdep expression which verifies RTNL is held.

[1]
 =============================
 WARNING: suspicious RCU usage
 5.9.0-rc1-custom-14233-g2f26e122d62f #129 Not tainted
 -----------------------------
 net/ipv4/fib_trie.c:2124 RCU-list traversed in non-reader section!!

 other info that might help us debug this:

 rcu_scheduler_active = 2, debug_locks = 1
 1 lock held by ip/834:
  #0: ffffffff85a3b6b0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0

 stack backtrace:
 CPU: 0 PID: 834 Comm: ip Not tainted 5.9.0-rc1-custom-14233-g2f26e122d62f #129
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014
 Call Trace:
  dump_stack+0x100/0x184
  lockdep_rcu_suspicious+0x143/0x14d
  fib_info_notify_update+0x8d1/0xa60
  __nexthop_replace_notify+0xd2/0x290
  rtm_new_nexthop+0x35e2/0x5946
  rtnetlink_rcv_msg+0x4f7/0xbd0
  netlink_rcv_skb+0x17a/0x480
  rtnetlink_rcv+0x22/0x30
  netlink_unicast+0x5ae/0x890
  netlink_sendmsg+0x98a/0xf40
  ____sys_sendmsg+0x879/0xa00
  ___sys_sendmsg+0x122/0x190
  __sys_sendmsg+0x103/0x1d0
  __x64_sys_sendmsg+0x7d/0xb0
  do_syscall_64+0x32/0x50
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7fde28c3be57
 Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51
c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
RSP: 002b:00007ffc09330028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fde28c3be57
RDX: 0000000000000000 RSI: 00007ffc09330090 RDI: 0000000000000003
RBP: 000000005f45f911 R08: 0000000000000001 R09: 00007ffc0933012c
R10: 0000000000000076 R11: 0000000000000246 R12: 0000000000000001
R13: 00007ffc09330290 R14: 00007ffc09330eee R15: 00005610e48ed020

Fixes: 1bff1a0c ("ipv4: Add function to send route updates")
Signed-off-by: default avatarIdo Schimmel <idosch@nvidia.com>
Reviewed-by: default avatarDavid Ahern <dsahern@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7f6f32bb
    • Xie He's avatar
      drivers/net/wan/lapbether: Set network_header before transmitting · 91244d10
      Xie He authored 
      Set the skb's network_header before it is passed to the underlying
Ethernet device for transmission.

This patch fixes the following issue:

When we use this driver with AF_PACKET sockets, there would be error
messages of:
   protocol 0805 is buggy, dev (Ethernet interface name)
printed in the system "dmesg" log.

This is because skbs passed down to the Ethernet device for transmission
don't have their network_header properly set, and the dev_queue_xmit_nit
function in net/core/dev.c complains about this.

Reason of setting the network_header to this place (at the end of the
Ethernet header, and at the beginning of the Ethernet payload):

Because when this driver receives an skb from the Ethernet device, the
network_header is also set at this place.

Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: default avatarXie He <xie.he.0141@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      91244d10
    • Florian Westphal's avatar
      mptcp: free acked data before waiting for more memory · 1cec170d
      Florian Westphal authored 
      After subflow lock is dropped, more wmem might have been made available.

This fixes a deadlock in mptcp_connect.sh 'mmap' mode: wmem is exhausted.
But as the mptcp socket holds on to already-acked data (for retransmit)
no wakeup will occur.

Using 'goto restart' calls mptcp_clean_una(sk) which will free pages
that have been acked completely in the mean time.

Fixes: fb529e62 ("mptcp: break and restart in case mptcp sndbuf is full")
Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1cec170d
    • Vinicius Costa Gomes's avatar
      taprio: Fix using wrong queues in gate mask · 09e31cf0
      Vinicius Costa Gomes authored 
      Since commit 9c66d156 ("taprio: Add support for hardware
offloading") there's a bit of inconsistency when offloading schedules
to the hardware:

In software mode, the gate masks are specified in terms of traffic
classes, so if say "sched-entry S 03 20000", it means that the traffic
classes 0 and 1 are open for 20us; when taprio is offloaded to
hardware, the gate masks are specified in terms of hardware queues.

The idea here is to fix hardware offloading, so schedules in hardware
and software mode have the same behavior. What's needed to do is to
map traffic classes to queues when applying the offload to the driver.

Fixes: 9c66d156 ("taprio: Add support for hardware offloading")
Signed-off-by: default avatarVinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      09e31cf0
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7