- 29 Sep, 2015 40 commits
-
-
Hante Meuleman authored
Some devices with older firmwares are reporting new p2p device interface with the wrong type. Accept this type to get p2p working for these devices. Reviewed-by:
Arend Van Spriel <arend@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by:
Hante Meuleman <meuleman@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Hante Meuleman authored
In some situations it is possible that vif has been removed while cfg80211 invokes the p2p_stop_device handler. This will result in crash. Reviewed-by:
-
Hante Meuleman authored
When a p2p device gets deleted, the memory for the vif is not being released. This is solved by reorganizing the cleanup path and properly freeing the memory. Reviewed-by:
-
Hante Meuleman authored
Different wpa_supplicants have different behavior and expectations regarding the change_virtual_intf behavior. This patch implements a workaround for the different versions and possible brcmfmac configuration. Reviewed-by:
-
Hante Meuleman authored
p2pon module param is currently under define BRCMDBG. Though it is a needed option for older versions of the wpa_supplicant which do not support the P2P_DEVICE interface. Reviewed-by:
-
Hante Meuleman authored
The hash index stored in the flowrings is of type u16 but gets stored in u8. This can result in incorrect indexing and possibly result in crashes. This patch fixes the type. Reviewed-by:
-
Hante Meuleman authored
When the p2pon module param is used then p2p attach will initialize p2p device iface in the firmware, but it is doing that by checking data. It is cleaner to pass the p2pon information to p2p by API. This information is also needed for other patch. Reviewed-by:
-
Hante Meuleman authored
The if2bss allows for translation of ifidx to bssidx which has a 1:n relation. Therefor only the first (primary) netdev should be assigned in this array. This fixes the p2pon=1 module param usage. Reviewed-by:
-
Hante Meuleman authored
Implementation of tx-power (get and set) related functions are still assuming mW interface. This is wrong as functions use dbm (or mbm) nowadays. As a result a tx power configuration could result in wrong power configuration. Reviewed-by:
Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by:
-
Hante Meuleman authored
This patch adds support fo the BRCM4350 2x2 11ac PCIE device. Reviewed-by:
-
Hante Meuleman authored
In some exception situations the ifp->vif was not properly assigned which could result in crash. Reviewed-by:
-
Zhaoyang Liu authored
This patch do the work to TX data with specific USB endpoint. At the same time, update data_sent flag according to multi port status. And is_port_ready API is added for BSS interface to check if current used usb data endpoint is available or not. Signed-off-by:
Zhaoyang Liu <liuzy@marvell.com> Signed-off-by:
Cathy Luo <cluo@marvell.com> Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
-
Zhaoyang Liu authored
This patch add support for usb multi endpoints resync. Once multi channel event is received from firmware, update usb_mc_setp flag to block TX data until setup is over. And available data endpoint will be attached to BSS interface. Signed-off-by:
-
Zhaoyang Liu authored
This patch add support for USB interface to TX data with different endpoint. And previous TX information are saved in new designed structure. Signed-off-by:
-
Zhaoyang Liu authored
This patch add multi channel event process for USB multi tx data endpoints. Driver receives firmware multi channel event only in case that new connection is setup or interface is disconnect. Different BSS interface need update used usb endpoint. Signed-off-by:
-
Zhaoyang Liu authored
This patch move data_sent flag update to usb.c file. >From now all data_sent update cases only happened in specific file: sdio.c, usb.c, pcie.c. Outside ot these files, it is only allowed to check the value of data_ent. Signed-off-by:
-
Zhaoyang Liu authored
This patch fix missing tx data_sent flag update for usb interface. Except USB interface, data_sent flag has been updated in specific file such as sdio.c and pcie.c. So only USB interface type need check when TX data completed. Signed-off-by:
-
Amitkumar Karwar authored
We have preallocated buffer pool for Tx data. During high data traffic, all buffers are submitted to USB and driver needs to wait until one of the buffers get available for next Tx packet. "data: -ENOSR is returned" errors is expected in this case. Let's lower the priority of this message. Signed-off-by:
-
Zhaoyang Liu authored
This patch fixes observed issues while updating counter for number of paused data packets in wmm queue when trying to delete packet or delete station entry. Signed-off-by:
-
Amitkumar Karwar authored
Preallocated PCIe buffer is being reused for all PCIe interface events. Physical address of the buffer is shared with firmware so that it can perform DMA on it. As event length is specified in the header, there should not be a problem if the buffer gets overwritten. We will save some cycles by avoiding memset everytime while submitting the buffer to firmware. Fixes: 2728cecd(mwifiex: corrections in PCIe event skb) Signed-off-by:
-
Aniket Nagarnaik authored
This NULL pointer dereference is observed during suspend resume stress test. All pending commands are cancelled when system goes into suspend state. There a corner case in which host may receive response for last scan command after this and try to trigger extra active scan for hidden SSIDs. The issue is fixed by adding a NULL check to skip that extra scan. Fixes: 2375fa2b (mwifiex: fix unable to connect hidden SSID..) Cc: <stable@vger.kernel.org> [v4.2+] Signed-off-by:
Aniket Nagarnaik <aniketn@marvell.com> Signed-off-by:
-
Aniket Nagarnaik authored
Current TDLS implementation always includes ht/vht information in tdls setup confirm frame which causes teardown by legacy peer station after TDLS handshake. We will inclue ht/vht capabilities in tdls setup confirm frame only if peer station supports it to fix this problem. Signed-off-by:
-
Xinming Hu authored
cfg80211_inform_bss would return null in some cases, such as memory allocation failure. This patch adds sanity check for this case, to avoid possible issues when above corner case is hit. Signed-off-by:
Xinming Hu <huxm@marvell.com> Signed-off-by:
-
Xinming Hu authored
64k Tx and Rx buffers are allocated during driver initialization for SDIO level data aggregations. When host is under memory pressure situation, kzalloc() request for 64k may fail. We will try allocating 32k buffers and disable our rx single port aggreagation feature in this situation. If the allocation still fails, we will disable our sdio multport aggregation feature as well. In this way, we will transmit and receive packets one by one, thus reduce the demand for big memory. Signed-off-by:
-
Xinming Hu authored
This patch includes below changes 1) Check if multiport aggregation feature flag while doing rx length validation check. 2) Reset buffer size variables when buffers are freed. Signed-off-by:
-
Zhaoyang Liu authored
This patch fixes the issue of delay time in A-MSDU tx packet. In generated new A-MSDU packet, the time stamp is initialized to zero. Choose the time of first MSDU packet as aggregated packet's time. Signed-off-by:
-
Xinming Hu authored
Interface counters should be incremented in add_virtual_intf() and decremented in del_virtual_intf() function. This patch corrects it. Signed-off-by:
-
Guodong Xu authored
Align fields reg_ch_conf_last and reg_ch_conf_pending of struct wl1271{} to 64bit. Without this, on 64bit ARM, wlcore_set_pending_regdomain_ch() fails at the point it calls set_bit(ch_bit_idx, (long*)wl->reg_ch_conf_pending); Here is the error message while doing iw wlan0 scan or connect: [ 10.666857] wlcore: IRQ work [ 10.670046] wlcore: intr: 0x40 (fw_rx_counter = 1, drv_rx_counter = 0, tx_results_counter = 0) [ 10.678697] wlcore: WL1271_ACX_INTR_DATA [ 10.682810] Unhandled fault: alignment fault (0x96000021) at 0xffffffc037a817f4 [ 10.690139] Internal error: : 96000021 [#1] PREEMPT SMP [ 10.695366] Modules linked in: [ 10.698437] CPU: 3 PID: 894 Comm: irq/60-wl18xx Tainted: G W 4.2.0-rc6-linaro-hikey #2 [ 10.707501] Hardware name: HiKey Development Board (DT) [ 10.712733] task: ffffffc03a9d1680 ti: ffffffc039e18000 task.ti: ffffffc039e18000 [ 10.720239] PC is at set_bit+0x14/0x30 [ 10.724002] LR is at wlcore_set_pending_regdomain_ch+0x40/0x4c Signed-off-by:Guodong Xu <guodong.xu@linaro.org> Signed-off-by:
-
Jan Kaisrlik authored
The patch adds support for "outside the context of a BSS"(OCB) mode to ath9k driver and extends debugfs files by OCB ralated information. This patch was tested on AR9380-AL1A cards. Signed-off-by:
Jan Kaisrlik <kaisrja1@fel.cvut.cz> Cc: Michal Sojka <sojkam1@fel.cvut.cz> Signed-off-by:
-
Hiroaki KAWAI authored
Fix rssi calculation error which was introduced in otus to ar9170 porting. Signed-off-by:
Hiroaki KAWAI <hiroaki.kawai@gmail.com> Acked-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Geoff Levand authored
Fixes the output of 'modinfo --field firmware'. Signed-off-by:
Geoff Levand <geoff@infradead.org> Signed-off-by:
-
Miaoqing Pan authored
This patch fix https://lists.openwrt.org/pipermail/openwrt-devel/ 2015-August/034979.html. As the peak detect calibration is set incorrectly. Signed-off-by:
Miaoqing Pan <miaoqing@qca.qualcomm.com> Signed-off-by:
-
Joe Perches authored
The mwifiex_dbg macro has two tests that could be consolidated into a function reducing overall object size ~10KB (~4%). So convert the macro into a function. $ size drivers/net/wireless/mwifiex/built-in.o* (x86-64 defconfig) text data bss dec hex filename 233102 8628 4809 246539 3c30b drivers/net/wireless/mwifiex/built-in.o.new 243949 8628 4809 257386 3ed6a drivers/net/wireless/mwifiex/built-in.o.old Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Hante Meuleman authored
When PCIE type devices are being FW reloaded without being properly reset then the device ends up in a locked state, requiring the device to be completely powered down. This patch adds a reset through watchdog at the moment the device (cores) has been recognized. This will solve warm reboot issues. Cc: Rafal Milecki <zajec5@gmail.com> Reviewed-by:
-
Arend van Spriel authored
In case of error during brcmf_bus_start() the network interfaces were freed using free_netdev(). However, the interfaces may have additional memory allocated which is not freed. The netdev has destructor set to brcmf_cfg80211_free_netdev() which frees the additional memory if allocated and call free_netdev(). The brcmf_net_detach() either calls brcmf_cfg80211_free_netdev() directly or uses unregister_netdev() when struct net_device::reg_state indicates the netdev was registered. Reported-by:
Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by:
-
Arend van Spriel authored
Instead of passing ifidx and drvr just pass struct brcmf_if pointer which holds both parameters. Reviewed-by:
-
Arend van Spriel authored
The brcmf_fws_txstatus_suppressed() function prototype specifies an ifidx parameter which is not used within the function implementation. Reviewed-by:
-
Arend van Spriel authored
Both PCIe and SDIO devices have the possibility to log the firmware console output in kernel log. For PCIe it is logged when PCIE debug level is enabled. For SDIO it is logged when user specifies a non-zero console interval through debugfs. This patch tries to make it a bit more consistent. The firmware console output is only logged when FWCON debug level is enabled. Reviewed-by:
Pontus Fuchs <pontusf@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
Because the P2P Device interface in firmware uses the same interface index as the primary interface we use the bsscfg index as index in the struct brcmf_pub::iflist. However, in the data path we get the interface index and not the bsscfg index. So we need a mapping of interface index to bsscfg index, which can be determined upon handle adding the interface. Reviewed-by:
-
Arend van Spriel authored
Most call sites of brcmf_txfinalize already have struct brcmf_if instance so pass that to brcmf_txfinalize() as the function needs it anyway. Reviewed-by:
-
