- 25 Nov, 2009 1 commit
-
-
Philipp Reisner authored
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
- 24 Nov, 2009 4 commits
-
-
Philipp Reisner authored
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Philipp Reisner authored
Since 8.3.3 we fail to do the resync when a partial resynch is not possible, but a full synch is necessary. This regression was introduced with 7101539930c0a89146959e7a39c09ad9c3516434 Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
Otherwise the 'state fixup' in the receiver will change to Unconnected, but the receiver will terminate itself, and any attempt at 'down'ing that drbd later will block forever. see also Bugz. #259 Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
this is uncritical, as we still also serialize in userland, but to correctly serialize on the CONFIG_PENDING bit, it must be wait_event(state_wait, \!test_and_set_bit) Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
- 23 Nov, 2009 4 commits
-
-
Alex Chiang authored
A recent commit broke the ia64 build: Author: Don Brace <brace@beardog.cce.hp.com> Date: Thu Nov 12 12:50:01 2009 -0600 cciss: Add enhanced scatter-gather support. because of this hunk: --- a/drivers/block/cciss.h +++ b/drivers/block/cciss.h +struct Cmd_sg_list { + SGDescriptor_struct *sgchain; + dma64_addr_t sg_chain_dma; + int chain_block_size; +}; The issue is that dma64_addr_t isn't #define'd on ia64. The way that we're using Cmd_sg_list.sg_chain_dma is to hold an address returned from pci_map_single(). + temp64.val = pci_map_single(h->pdev, + h->cmd_sg_list[c->cmdindex]->sgchain, + len, dir); + + h->cmd_sg_list[c->cmdindex]->sg_chain_dma = temp64.val; pci_map_single() returns a dma_addr_t too. This code will still work even on a 32-bit x86 build, where dma_addr_t is defined to be a u32 because it will simply be promoted to the __u64 that temp64.val is defined as. Thus, declaring Cmd_sg_list.sg_chain_dma as dma_addr_t is safe. Cc: Don Brace <brace@beardog.cce.hp.com> Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Stephen M. Cameron authored
On driver unload, only free up the extra scatter gather data if they were allocated in the first place (the controller supports it) and don't forget to free up the sg_cmd_list array of pointers. Signed-off-by: Don Brace <brace@beardog.cce.hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Karel Zak authored
The size of EFI GPT header is not static, but whole sector is allocated for the header. The HeaderSize field must be greater than 92 (= sizeof(struct gpt_header) and must be less than or equal to the logical block size. It means we have to read whole sector with the header, because the header crc32 checksum is calculated according to HeaderSize. For more details see UEFI standard (version 2.3, May 2009): - 5.3.1 GUID Format overview, page 93 - Table 13. GUID Partition Table Header, page 96 Signed-off-by: Karel Zak <kzak@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Karel Zak authored
Currently, kernel uses strictly 512-byte sectors for EFI GPT parsing. That's wrong. UEFI standard (version 2.3, May 2009, 5.3.1 GUID Format overview, page 95) defines that LBA is always based on the logical block size. It means bdev_logical_block_size() (aka BLKSSZGET) for Linux. This patch removes static sector size from EFI GPT parser. The problem is reproducible with the latest GNU Parted: # modprobe scsi_debug dev_size_mb=50 sector_size=4096 # ./parted /dev/sdb print Model: Linux scsi_debug (scsi) Disk /dev/sdb: 52.4MB Sector size (logical/physical): 4096B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 24.6kB 3002kB 2978kB primary 2 3002kB 6001kB 2998kB primary 3 6001kB 9003kB 3002kB primary # blockdev --rereadpt /dev/sdb # dmesg | tail -1 sdb: unknown partition table <---- !!! with this patch: # blockdev --rereadpt /dev/sdb # dmesg | tail -1 sdb: sdb1 sdb2 sdb3 Signed-off-by: Karel Zak <kzak@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
- 13 Nov, 2009 11 commits
-
-
Stephen M. Cameron authored
cciss: Fix weird usage of ENXIO in cciss_scsi.c Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Don Brace authored
cciss: Add enhanced scatter-gather support. For controllers which supported, more than 512 scatter-gather elements per command may be used, and the max transfer size can be increased to 8192 blocks. Signed-off-by: Don Brace <brace@beardog.cce.hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Stephen M. Cameron authored
cciss: Do not automatically rescan on UNIT ATTENTION/LUN DATA CHANGED There are problems with doing this. If, say, several logical drives are deleted at once, several such UNIT ATTENTIONS will be encountered, often during the rescan triggered by the first such UNIT ATTENTION. The block layer may be in the midst of trying to add logical drives which were just deleted (resulting in the subsequent UNIT ATTENTION(s).) Making the rescan code robust enough to tolerate this kind of thing is too complicated for the moment. So, for now, we just don't do it. Note: This UNIT ATTENTION/LUN DATA CHANGED situation only occurs on the MSA2012. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Stephen M. Cameron authored
cciss: Remove unnecessary check in scan_thread Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Stephen M. Cameron authored
cciss: fix typo that causes scsi status to be lost. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Stephen M. Cameron authored
cciss: remove sendcmd() as it is no longer used. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Stephen M. Cameron authored
cciss: clean up code in cciss_shutdown. Send the flush cache command down with interrupts still enabled, and do not do DMA from the stack. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Stephen M. Cameron authored
cciss: Remove the "withirq" parameter from various functions where possible Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Stephen M. Cameron authored
cciss: Retry driver initiated cmds with unit attention condition Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Stephen M. Cameron authored
cciss: Fix problem with remove_from_scan_list that on driver unload it doesn't remove the controller from the scan list correctly if the controller is currently being scanned for new devices. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Alex Chiang authored
cciss: Make device attributes static Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Alex Chiang <achiang@hp.com> Acked-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
- 11 Nov, 2009 1 commit
-
-
Randy Dunlap authored
Use HZ-independent calculation of milliseconds. Add jiffies.h where it was missing since functions or macros from it are used. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
- 10 Nov, 2009 1 commit
-
-
Martin K. Petersen authored
While SSDs track block usage on a per-sector basis, RAID arrays often have allocation blocks that are bigger. Allow the discard granularity and alignment to be set and teach the topology stacking logic how to handle them. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
- 08 Nov, 2009 1 commit
-
-
Corrado Zoccolo authored
Cfq has a bug in computation of next_rq, that affects transition between multiple sequential request streams in a single queue (e.g.: two sequential buffered writers of the same priority), causing the alternation between the two streams for a transient period. 8,0 1 18737 0.260400660 5312 D W 141653311 + 256 8,0 1 20839 0.273239461 5400 D W 141653567 + 256 8,0 1 20841 0.276343885 5394 D W 142803919 + 256 8,0 1 20843 0.279490878 5394 D W 141668927 + 256 8,0 1 20845 0.292459993 5400 D W 142804175 + 256 8,0 1 20847 0.295537247 5400 D W 141668671 + 256 8,0 1 20849 0.298656337 5400 D W 142804431 + 256 8,0 1 20851 0.311481148 5394 D W 141668415 + 256 8,0 1 20853 0.314421305 5394 D W 142804687 + 256 8,0 1 20855 0.318960112 5400 D W 142804943 + 256 The fix makes sure that the next_rq is computed from the last dispatched request, and not affected by merging. 8,0 1 37776 4.305161306 0 D W 141738087 + 256 8,0 1 37778 4.308298091 0 D W 141738343 + 256 8,0 1 37780 4.312885190 0 D W 141738599 + 256 8,0 1 37782 4.315933291 0 D W 141738855 + 256 8,0 1 37784 4.319064459 0 D W 141739111 + 256 8,0 1 37786 4.331918431 5672 D W 142803007 + 256 8,0 1 37788 4.334930332 5672 D W 142803263 + 256 8,0 1 37790 4.337902723 5672 D W 142803519 + 256 8,0 1 37792 4.342359774 5672 D W 142803775 + 256 8,0 1 37794 4.345318286 0 D W 142804031 + 256 Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
- 04 Nov, 2009 12 commits
-
-
-
Philipp Reisner authored
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Philipp Reisner authored
When there are many blocks on the fly (ua), and the AL gets into "starving" mode (random IO, scattered all over the device), and the connections gets interrupted, the receiver thread deadlocks in the drbd_disconnect() code path. Affected are only nodes in Primary role. The bug triggers most likely on system that mirror over "long distances" Regression introduced shortly before 8.3.3 with git commit 31e0f1250f174ac1ee317f360943a0159e19edc8 Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Philipp Reisner authored
When IO gets frozen due to a broken fence-peer script, the user should be able to thaw IO by the resume-io command. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
To check wether we are truncating a very large device due to limited meta data space, we need to check the ll_dev size. Also improve the printk to suggest "flexible" or "internal". Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
H Hartley Sweeten authored
Quiet sparse noise about symbol's not being declared. Symbol blk_default_cmd_filter is only used locally and should be static. The function blk_scsi_ioctl_init() is a fs_initcall and should also be static. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Changli Gao authored
sendfile(2) was reworked with the splice infrastructure, but it still checks f_op.sendpage() instead of f_op.splice_write() wrongly. Although if f_op.sendpage() exists, f_op.splice_write() always exists at the same time currently, the assumption will be broken in future silently. This patch also brings a side effect: sendfile(2) can work with any output file. Some security checks related to f_op are added too. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Hideyuki Sasaki authored
The current PS3 VRAM driver uses msleep() to wait for completion of RSX DMA transfers between system memory and VRAM. Depending on the system timing, the processing delay and overhead of this msleep() call can significantly impact VRAM driver IO. To avoid the condition, add a short duration (200 usec max) udelay() polling loop before entering the msleep() polling loop. Signed-off-by: Hideyuki Sasaki <xhide@rd.scei.sony.co.jp> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: Jim Paris <jim@jtan.com> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Jens Axboe authored
We need to rework this logic post the cooperating cfq_queue merging, for now just get rid of it and Jeff Moyer will fix the fall out. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
- 03 Nov, 2009 5 commits
-
-
Jens Axboe authored
We ended up with testing the same condition twice, pretty pointless. Remove that first if. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Jens Axboe authored
Conflicts: block/cfq-iosched.c Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Jens Axboe authored
-
Shaohua Li authored
CFQ has an optimization for cooperated applications. if several io-context have close requests, they will get boost. But the optimization get abused. Considering thread a, b, which work on one file. a reads sectors s, s+2, s+4, ...; b reads sectors s+1, s+3, s +5, ... Both a and b are sequential read, so they can open idle window. a reads a sector s and goes to idle window and wakeup b. b reads sector s+1, since in current implementation, cfq_should_preempt() thinks a and b are cooperators, b will preempt a. b then reads sector s+1 and goes to idle window and wakeup a. for the same reason, a will preempt b and reads s+2. a and b will continue the circle. The circle will be very long, and a and b will occupy whole disk queue. Other applications will nearly have no chance to run. Fix this limiting coop preempt until a queue is scheduled normally again. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Jens Axboe authored
Commit a6151c3a inadvertently reversed a preempt condition check, potentially causing a performance regression. Make the meta check correct again. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-