You can't pass demangled name into "perf probe", because of special chars:
./perf probe -f -x /tmp/a.out 'foo(int)'
Semantic error :There is non-digit char in line number.

And you can't even pass without demangling (because it search symbol in
DSO with demangle=true):
./perf probe -f -x /tmp/a.out _Z3fooi
no symbols found in /tmp/a.out, maybe install a debug package?

However:
nm /tmp/a.out | grep foo
000000000040056d T _Z3fooi

After this patch, using the next command:
./perf probe -f --no-demangle -x /tmp/a.out _Z3fooi

probe will be successfully added.
Signed-off-by: Azat Khuzhin <a3at.mail@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1382947464-31266-1-git-send-email-a3at.mail@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

$ perf record ls
$ perf report

Press 'down enter end'

Result:

Program received signal SIGSEGV, Segmentation fault.

The UI browser, used on a argv array would access past the end of the
array on SEEK_END because it wasn't using 'nr_entries - 1', fix it.

Reported-by: v.karpov@samsung.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=59291
Link: http://lkml.kernel.org/n/tip-3g83ipasqi219ktv764xzzjs@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It was affecting only frame-pointer (fp) based callchain processing.

Usage example:

  perf top --call-graph dwarf,1024 --max-stack 2

Works for any tool that does callchain resolving and provides a
--max-stack option.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Link: http://lkml.kernel.org/n/tip-eu45v8s3tq9ruay8tpfyon79@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Just one use so far, on the hists browser, for completeness since there
we use perf_evlist__{first,last} and perf_evsel__next() for handling the
TAB and UNTAB keys.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-d09l4lejp5427enuf3igpckw@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

In a few remaining places where the equivalent open coded variant was
still being used.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4vjnloi5fisilykwxalb5nel@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When introducing the PERF_RECORD_MMAP2 in:

5c5e854b perf tools: Add attr->mmap2 support

A check for the number of entries parsed by sscanf was introduced that
assumed all of the 8 fields needed to be correctly parsed so that
particular /proc/pid/maps line would be considered synthesizable.

That broke anon records synthesizing, as it doesn't have the 'execname'
field.

Fix it by keeping the sscanf return check, changing it to not require
that the 'execname' variable be parsed, so that the preexisting logic
can kick in and set it to '//anon'.

This should get things like JIT profiling working again.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Bill Gray <bgray@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Richard Fowles <rfowles@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/n/tip-bo4akalno7579shpz29u867j@git.kernel.org
[ commit log message is mine, dzickus reported the problem with a patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add missing newline if the 'uid' is invalid:

  hubble:~> perf top --stdio -u help
  Error:
  Invalid User: helphubble:~>

Fixed by this patch:

  comet:~/tip/tools/perf> perf top --stdio -u help
  Error:
  Invalid User: help
  comet:~/tip/tools/perf>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131112232609.GA31474@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Accidentally ran into these, get rid of them.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Link: http://lkml.kernel.org/r/1384323864.2527.8.camel@buesod1.americas.hpqcorp.netSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Tweak the summary output as suggested by Ingo Molnar:

  [penberg@localhost ~]$ perf trace -a --duration 10000 --summary -- sleep 1
  ^C
   Summary of events:

   Xorg (817), 148 events, 0.0%, 0.000 msec

     syscall            calls      min       avg       max      stddev
                                 (msec)    (msec)    (msec)        (%)
     --------------- -------- --------- --------- ---------     ------
     read                   7     0.002     0.004     0.011     32.00%
     rt_sigprocmask        40     0.001     0.001     0.002      1.31%
     ioctl                  6     0.002     0.003     0.005     19.45%
     writev                 7     0.004     0.018     0.059     43.76%
     select                 9     0.000    74.513   507.869     74.61%
     setitimer              4     0.001     0.002     0.002     10.08%
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: http://lkml.kernel.org/r/1384345308-24404-1-git-send-email-penberg@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Set feature-libunwind-debug-frame. We don't want it in
CORE_FEATURE_TESTS because it's not the generic case, but we
need to set it in the !feature-libunwind case.

Also, because x86 distributions typically don't have
dwarf_find_debug_frame() unwinding method:

  test-libunwind-debug-frame.c:(.text+0x31): undefined reference to `_Ux86_64_dwarf_find_debug_frame'

Restrict this new API to ARM for the time being.

With this patch test-all.c works again, so repeat perf builds
are  fast again:

  comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
  [...]

       0,452899660 seconds time elapsed                                          ( +-  0,11% )

While with before it was:

  comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
  [...]

       1,674001829 seconds time elapsed                                          ( +-  0,16% )

[ Includes fix to config/feature-checks/Makefile from Will Deacon. ]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Jean Pihet <jean.pihet@linaro.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-scsoctqzmou3rpkixCHezy9e@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

'feature_timerfd' is checked all the time and calculated explicitly,
in a serial fashion. Add it to CORE_FEATURE_TESTS which causes it to
be built in parallel, using the newfangled parallel build autodetection
code.

This shaves 137 msecs off the perf build time on my system, which
speeds up the common case cached build by 43%:

Before:

  comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
  [...]
         0,453771441 seconds time elapsed                                          ( +-  0,09% )

After:

  comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
  [...]
         0,316290185 seconds time elapsed                                          ( +-  0,24% )

Cc: David Ahern <dsahern@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-bb92CmexihopoSyqnkqepvsy@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Merge dependencies to apply a fix.
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull fbdev changes from Tomi Valkeinen:
 "Nothing particularly stands out in this pull request.  The biggest
  part of the changes are cleanups.

  Maybe one fix to mention is the "fb: reorder the lock sequence to fix
  potential dead lock" which hopefully fixes the fb locking issues
  reported by multiple persons.

  There are also a few commits that have changes to arch/arm/mach-at91
  and arch/avr32, which have been acked by the maintainers"

* tag 'fbdev-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (143 commits)
  fb: reorder the lock sequence to fix potential dead lock
  fbdev: shmobile-lcdcfb: Convert to clk_prepare/unprepare
  fbdev: shmobile-hdmi: Convert to clk_prepare/unprepare
  omapdss: Add new panel driver for Topolly td028ttec1 LCD.
  video: exynos_mipi_dsi: Unlock the mutex before returning
  video: da8xx-fb: remove unwanted define
  video: Remove unnecessary semicolons
  simplefb: use write-combined remapping
  simplefb: fix unmapping fb during destruction
  OMAPDSS: connector-dvi: fix releasing i2c_adapter
  OMAPDSS: DSI: fix perf measuring ifdefs
  framebuffer: Use fb_<level>
  framebuffer: Add fb_<level> convenience logging macros
  efifb: prevent null-deref when iterating dmi_list
  fbdev: fix error return code in metronomefb_probe()
  video: xilinxfb: Fix for "Use standard variable name convention"
  OMAPDSS: Fix de_level in videomode_to_omap_video_timings()
  video: xilinxfb: Simplify error path
  video: xilinxfb: Use devm_kzalloc instead of kzalloc
  video: xilinxfb: Use standard variable name convention
  ...

Pull thermal management updates from Zhang Rui:
 "This time we only have a few changes as there are no soc thermal
  changes from Eduardo.  The only big change is the introduction of
  TMON, a tool to help visualize, tune, and test the thermal subsystem.
  The rest is mostly cleanups and fixes all over.

  Specifics:

   - introduce TMON, a tool base on thermal sysfs I/F.  It can be used
     to visualize, tune and test the thermal subsystem.

   - fix a zone/cooling device binding problem, when both thermal zone
     bind parameters and .bind() callback are available"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  tools/thermal: Introduce tmon, a tool for thermal subsystem
  thermal: Fix binding problem when there is thermal zone params
  thermal: cpu_cooling: fix return value check in cpufreq_cooling_register()
  Thermal: Check for validity before doing kfree
  thermal/intel_powerclamp: Add newer CPU models
  Thermal: Tidy up error handling in powerclamp_init
  thermal: Kconfig: cosmetic fixes
  ACPI/thermal : Remove zone disabled warning
  typo in drivers/thermal/Kconfig: lpatform instead of platform

Pull PCI changes from Bjorn Helgaas:
 "Resource management
    - Fix host bridge window coalescing (Alexey Neyman)
    - Pass type, width, and prefetchability for window alignment (Wei Yang)

  PCI device hotplug
    - Convert acpiphp, acpiphp_ibm to dynamic debug (Lan Tianyu)

  Power management
    - Remove pci_pm_complete() (Liu Chuansheng)

  MSI
    - Fail initialization if device is not in PCI_D0 (Yijing Wang)

  MPS (Max Payload Size)
    - Use pcie_get_mps() and pcie_set_mps() to simplify code (Yijing Wang)
    - Use pcie_set_readrq() to simplify code (Yijing Wang)
    - Use cached pci_dev->pcie_mpss to simplify code (Yijing Wang)

  SR-IOV
    - Enable upstream bridges even for VFs on virtual buses (Bjorn Helgaas)
    - Use pci_is_root_bus() to avoid catching virtual buses (Wei Yang)

  Virtualization
    - Add x86 MSI masking ops (Konrad Rzeszutek Wilk)

  Freescale i.MX6
    - Support i.MX6 PCIe controller (Sean Cross)
    - Increase link startup timeout (Marek Vasut)
    - Probe PCIe in fs_initcall() (Marek Vasut)
    - Fix imprecise abort handler (Tim Harvey)
    - Remove redundant of_match_ptr (Sachin Kamat)

  Renesas R-Car
    - Support Gen2 internal PCIe controller (Valentine Barshak)

  Samsung Exynos
    - Add MSI support (Jingoo Han)
    - Turn off power when link fails (Jingoo Han)
    - Add Jingoo Han as maintainer (Jingoo Han)
    - Add clk_disable_unprepare() on error path (Wei Yongjun)
    - Remove redundant of_match_ptr (Sachin Kamat)

  Synopsys DesignWare
    - Add irq_create_mapping() (Pratyush Anand)
    - Add header guards (Seungwon Jeon)

  Miscellaneous
    - Enable native PCIe services by default on non-ACPI (Andrew Murray)
    - Cleanup _OSC usage and messages (Bjorn Helgaas)
    - Remove pcibios_last_bus boot option on non-x86 (Bjorn Helgaas)
    - Convert bus code to use bus_, drv_, and dev_groups (Greg Kroah-Hartman)
    - Remove unused pci_mem_start (Myron Stowe)
    - Make sysfs functions static (Sachin Kamat)
    - Warn on invalid return from driver probe (Stephen M. Cameron)
    - Remove Intel Haswell D3 delays (Todd E Brandt)
    - Call pci_set_master() in core if driver doesn't do it (Yinghai Lu)
    - Use pci_is_pcie() to simplify code (Yijing Wang)
    - Use PCIe capability accessors to simplify code (Yijing Wang)
    - Use cached pci_dev->pcie_cap to simplify code (Yijing Wang)
    - Removed unused "is_pcie" from struct pci_dev (Yijing Wang)
    - Simplify sysfs CPU affinity implementation (Yijing Wang)"

* tag 'pci-v3.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (79 commits)
  PCI: Enable upstream bridges even for VFs on virtual buses
  PCI: Add pci_upstream_bridge()
  PCI: Add x86_msi.msi_mask_irq() and msix_mask_irq()
  PCI: Warn on driver probe return value greater than zero
  PCI: Drop warning about drivers that don't use pci_set_master()
  PCI: Workaround missing pci_set_master in pci drivers
  powerpc/pci: Use pci_is_pcie() to simplify code [fix]
  PCI: Update pcie_ports 'auto' behavior for non-ACPI platforms
  PCI: imx6: Probe the PCIe in fs_initcall()
  PCI: Add R-Car Gen2 internal PCI support
  PCI: imx6: Remove redundant of_match_ptr
  PCI: Report pci_pme_active() kmalloc failure
  mn10300/PCI: Remove useless pcibios_last_bus
  frv/PCI: Remove pcibios_last_bus
  PCI: imx6: Increase link startup timeout
  PCI: exynos: Remove redundant of_match_ptr
  PCI: imx6: Fix imprecise abort handler
  PCI: Fail MSI/MSI-X initialization if device is not in PCI_D0
  PCI: imx6: Remove redundant dev_err() in imx6_pcie_probe()
  x86/PCI: Coalesce multiple overlapping host bridge windows
  ...

Pull ACPI and power management updates from Rafael J Wysocki:

 - New power capping framework and the the Intel Running Average Power
   Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.

 - Addition of the in-kernel switching feature to the arm_big_little
   cpufreq driver from Viresh Kumar and Nicolas Pitre.

 - cpufreq support for iMac G5 from Aaro Koskinen.

 - Baytrail processors support for intel_pstate from Dirk Brandewie.

 - cpufreq support for Midway/ECX-2000 from Mark Langsdorf.

 - ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.

 - ACPI power management support for the I2C and SPI bus types from Mika
   Westerberg and Lv Zheng.

 - cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
   Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.

 - cpufreq drivers updates (mostly fixes and cleanups) from Viresh
   Kumar, Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz
   Majewski, Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.

 - intel_pstate updates from Dirk Brandewie and Adrian Huang.

 - ACPICA update to version 20130927 includig fixes and cleanups and
   some reduction of divergences between the ACPICA code in the kernel
   and ACPICA upstream in order to improve the automatic ACPICA patch
   generation process.  From Bob Moore, Lv Zheng, Tomasz Nowicki, Naresh
   Bhat, Bjorn Helgaas, David E Box.

 - ACPI IPMI driver fixes and cleanups from Lv Zheng.

 - ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani, Zhang
   Yanfei, Rafael J Wysocki.

 - Conversion of the ACPI AC driver to the platform bus type and
   multiple driver fixes and cleanups related to ACPI from Zhang Rui.

 - ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
   Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.

 - Fixes and cleanups and new blacklist entries related to the ACPI
   video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
   Kirill Tkhai.

 - cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.

 - cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
   Bartlomiej Zolnierkiewicz, Prarit Bhargava.

 - devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.

 - Operation Performance Points (OPP) core updates from Nishanth Menon.

 - Runtime power management core fix from Rafael J Wysocki and update
   from Ulf Hansson.

 - Hibernation fixes from Aaron Lu and Rafael J Wysocki.

 - Device suspend/resume lockup detection mechanism from Benoit Goby.

 - Removal of unused proc directories created for various ACPI drivers
   from Lan Tianyu.

 - ACPI LPSS driver fix and new device IDs for the ACPI platform scan
   handler from Heikki Krogerus and Jarkko Nikula.

 - New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.

 - Assorted fixes and cleanups related to ACPI from Andy Shevchenko, Al
   Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
   Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
   Liu Chuansheng.

 - Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
   Jean-Christophe Plagniol-Villard.

* tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (386 commits)
  cpufreq: conservative: fix requested_freq reduction issue
  ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines
  PM / runtime: Use pm_runtime_put_sync() in __device_release_driver()
  ACPI / event: remove unneeded NULL pointer check
  Revert "ACPI / video: Ignore BIOS initial backlight value for HP 250 G1"
  ACPI / video: Quirk initial backlight level 0
  ACPI / video: Fix initial level validity test
  intel_pstate: skip the driver if ACPI has power mgmt option
  PM / hibernate: Avoid overflow in hibernate_preallocate_memory()
  ACPI / hotplug: Do not execute "insert in progress" _OST
  ACPI / hotplug: Carry out PCI root eject directly
  ACPI / hotplug: Merge device hot-removal routines
  ACPI / hotplug: Make acpi_bus_hot_remove_device() internal
  ACPI / hotplug: Simplify device ejection routines
  ACPI / hotplug: Fix handle_root_bridge_removal()
  ACPI / hotplug: Refuse to hot-remove all objects with disabled hotplug
  ACPI / scan: Start matching drivers after trying scan handlers
  ACPI: Remove acpi_pci_slot_init() headers from internal.h
  ACPI / blacklist: fix name of ThinkPad Edge E530
  PowerCap: Fix build error with option -Werror=format-security
  ...

Conflicts:
	arch/arm/mach-omap2/opp.c
	drivers/Kconfig
	drivers/spi/spi.c

Pull device mapper changes from Mike Snitzer:
 "A set of device-mapper changes for 3.13.

  Improve reliability of buffer allocations for dm messages with a small
  number of arguments, a couple path group initialization fixes for dm
  multipath, a fix for resizing a dm array, various fixes and
  optimizations for dm cache, a fix for device mapper's Kconfig menu
  indentation.

  Features added include:
   - dm crypt support for activating legacy CBC TrueCrypt containers
     (useful for forensics of these old TCRYPT containers)
   - reduced dm-cache memory requirements for each block in the cache
   - basic support for shrinking a dm-cache's cache (fast) device
   - most notably, dm-cache support for managing cache coherency when
     deploying dm-cache with sophisticated origin volumes (that support
     hardware snapshots and/or clustering): these changes come in the
     form of a new passthrough operation mode and a cache block
     invalidation interface"

* tag 'dm-3.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (32 commits)
  dm cache: resolve small nits and improve Documentation
  dm cache: add cache block invalidation support
  dm cache: add remove_cblock method to policy interface
  dm cache policy mq: reduce memory requirements
  dm cache metadata: check the metadata version when reading the superblock
  dm cache: add passthrough mode
  dm cache: cache shrinking support
  dm cache: promotion optimisation for writes
  dm cache: be much more aggressive about promoting writes to discarded blocks
  dm cache policy mq: implement writeback_work() and mq_{set,clear}_dirty()
  dm cache: optimize commit_if_needed
  dm space map disk: optimise sm_disk_dec_block
  MAINTAINERS: add reference to device-mapper's linux-dm.git tree
  dm: fix Kconfig menu indentation
  dm: allow remove to be deferred
  dm table: print error on preresume failure
  dm crypt: add TCW IV mode for old CBC TCRYPT containers
  dm crypt: properly handle extra key string in initialization
  dm cache: log error message if dm_kcopyd_copy() fails
  dm cache: use cell_defer() boolean argument consistently
  ...

Pull MTD changes from Brian Norris:
 - Unify some compile-time differences so that we have fewer uses of
   #ifdef CONFIG_OF in atmel_nand
 - Other general cleanups (removing unused functions, options,
   variables, fields; use correct interfaces)
 - Fix BUG() for new odd-sized NAND, which report non-power-of-2
   dimensions via ONFI
 - Miscellaneous driver fixes (SPI NOR flash; BCM47xx NAND flash; etc.)
 - Improve differentiation between SLC and MLC NAND -- this clarifies an
   ABI issue regarding the MTD "type" (in sysfs and in the MEMGETINFO
   ioctl), where the MTD_MLCNANDFLASH type was present but
   inconsistently used
 - Extend GPMI NAND to support multi-chip-select NAND for some platforms
 - Many improvements to the OMAP2/3 NAND driver, including an expanded
   DT binding to bring us closer to mainline support for some OMAP
   systems
 - Fix a deadlock in the error path of the Atmel NAND driver probe
 - Correct the error codes from MTD mmap() to conform to POSIX and the
   Linux Programmer's Manual.  This is an acknowledged change in the MTD
   ABI, but I can't imagine somebody relying on the non-standard -ENOSYS
   error code specifically.  Am I just being unimaginative? :)
 - Fix a few important GPMI NAND bugs (one regression from 3.12 and one
   long-standing race condition)
 - More? Read the log!

* tag 'for-linus-20131112' of git://git.infradead.org/linux-mtd: (98 commits)
  mtd: gpmi: fix the NULL pointer
  mtd: gpmi: fix kernel BUG due to racing DMA operations
  mtd: mtdchar: return expected errors on mmap() call
  mtd: gpmi: only scan two chips for imx6
  mtd: gpmi: Use devm_kzalloc()
  mtd: atmel_nand: fix bug driver will in a dead lock if no nand detected
  mtd: nand: use a local variable to simplify the nand_scan_tail
  mtd: nand: remove deprecated IRQF_DISABLED
  mtd: dataflash: Say if we find a device we don't support
  mtd: nand: omap: fix error return code in omap_nand_probe()
  mtd: nand_bbt: kill NAND_BBT_SCANALLPAGES
  mtd: m25p80: fixup device removal failure path
  mtd: mxc_nand: Include linux/of.h header
  mtd: remove duplicated include from mtdcore.c
  mtd: m25p80: add support for Macronix mx25l3255e
  mtd: nand: omap: remove selection of BCH ecc-scheme via KConfig
  mtd: nand: omap: updated devm_xx for all resource allocation and free calls
  mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC instead of lib/bch.c
  mtd: nand: omap: clean-up ecc layout for BCH ecc schemes
  mtd: nand: omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe
  ...

Pull first round of SCSI updates from James Bottomley:
 "This patch set is driver updates for qla4xxx, scsi_debug, pm80xx,
  fcoe/libfc, eas2r, lpfc, be2iscsi and megaraid_sas plus some assorted
  bug fixes and cleanups"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (106 commits)
  [SCSI] scsi_error: Escalate to LUN reset if abort fails
  [SCSI] Add 'eh_deadline' to limit SCSI EH runtime
  [SCSI] remove check for 'resetting'
  [SCSI] dc395: Move 'last_reset' into internal host structure
  [SCSI] tmscsim: Move 'last_reset' into host structure
  [SCSI] advansys: Remove 'last_reset' references
  [SCSI] dpt_i2o: return SCSI_MLQUEUE_HOST_BUSY when in reset
  [SCSI] dpt_i2o: Remove DPTI_STATE_IOCTL
  [SCSI] megaraid_sas: Fix synchronization problem between sysPD IO path and AEN path
  [SCSI] lpfc: Fix typo on NULL assignment
  [SCSI] scsi_dh_alua: ALUA handler attach should succeed while TPG is transitioning
  [SCSI] scsi_dh_alua: ALUA check sense should retry device internal reset unit attention
  [SCSI] esas2r: Cleanup snprinf formatting of firmware version
  [SCSI] esas2r: Remove superfluous mask of pcie_cap_reg
  [SCSI] esas2r: Fixes for big-endian platforms
  [SCSI] esas2r: Directly call kernel functions for atomic bit operations
  [SCSI] lpfc 8.3.43: Update lpfc version to driver version 8.3.43
  [SCSI] lpfc 8.3.43: Fixed not processing task management IOCB response status
  [SCSI] lpfc 8.3.43: Fixed spinlock hang.
  [SCSI] lpfc 8.3.43: Fixed invalid Total_Data_Placed value received for els and ct command responses
  ...

Pull block driver updates from Jens Axboe:
 "This is the block driver pull request for 3.13.  As with the core pull
  request just sent out, this was rebased on top of the core branch
  again after the immutable series was pulled.  This also means that
  bcache gets to sit the initial pull over.  I will send a second driver
  pull request in the merge window to get those fixes in, once they have
  been rebased and tested on top of the non-immutable stack.

  This pull request contains:

   - Add support for the sTec Kronos pci-e flash card from sTec.  Also
     has various cleanups for this driver, from myself, Bart, Mike
     Snizter, and Wei Yongjun.

   - Add surprise removal support for the micron mtip32xx driver from
     Micron.

   - Floppy documentation fix from Ben Harris.

   - debugfs bug fix for pktcdvd from Dan Carpenter.

   - Fix for the mtip32xx driver stack usage in the debugfs path,
     dynamically allocating those buffers instead.  From David Milburn.

   - Disable cpqarray in Kconfig.  The plan is to remove it on request
     of HP, but lets disable it for a few revisions just to see if
     anyone yells.

   - drbd fixes from Lars Ellenberg and Philipp Reisner.

   - Elevator switch fix for the s390 block driver from Heiko Carstens.

   - loop crash fix on IO to unassigned device from Mikulas Patocka.

   - A series of bug fixes for the IBM rsxx pci-e flash driver from
     Philip J Kelleher.

   - cciss probe fix from Stephen Cameron.

   - Xen block front/back fixes from Roger Pau Monne and Vegard Nossum"

* 'for-3.13/drivers' of git://git.kernel.dk/linux-block: (41 commits)
  floppy: Correct documentation of driver options when used as a module.
  pktcdvd: debugfs functions return NULL on error
  xen-blkfront: restore the non-persistent data path
  skd: fix formatting in skd_s1120.h
  skd: reorder construct/destruct code
  skd: cleanup skd_do_inq_page_da()
  skd: remove SKD_OMIT_FROM_SRC_DIST ifdefs
  skd: remove redundant skdev->pdev assignment from skd_pci_probe()
  skd: use <asm/unaligned.h>
  skd: remove SCSI subsystem specific includes
  skd: register block device only if some devices are present
  skd: fix error messages in skd_init()
  skd: fix error paths in skd_init()
  skd: fix unregister_blkdev() placement
  skd: more removal of bio-based code
  skd: cleanup the skd_*() function block wrapping
  skd: rip out bio path
  skd: fix error return code in skd_pci_probe()
  s390/dasd: hold request queue sysfs lock when calling elevator_init()
  cciss: return 0 from driver probe function on success, not 1
  ...

Pull block IO core updates from Jens Axboe:
 "This is the pull request for the core changes in the block layer for
  3.13.  It contains:

   - The new blk-mq request interface.

     This is a new and more scalable queueing model that marries the
     best part of the request based interface we currently have (which
     is fully featured, but scales poorly) and the bio based "interface"
     which the new drivers for high IOPS devices end up using because
     it's much faster than the request based one.

     The bio interface has no block layer support, since it taps into
     the stack much earlier.  This means that drivers end up having to
     implement a lot of functionality on their own, like tagging,
     timeout handling, requeue, etc.  The blk-mq interface provides all
     these.  Some drivers even provide a switch to select bio or rq and
     has code to handle both, since things like merging only works in
     the rq model and hence is faster for some workloads.  This is a
     huge mess.  Conversion of these drivers nets us a substantial code
     reduction.  Initial results on converting SCSI to this model even
     shows an 8x improvement on single queue devices.  So while the
     model was intended to work on the newer multiqueue devices, it has
     substantial improvements for "classic" hardware as well.  This code
     has gone through extensive testing and development, it's now ready
     to go.  A pull request is coming to convert virtio-blk to this
     model will be will be coming as well, with more drivers scheduled
     for 3.14 conversion.

   - Two blktrace fixes from Jan and Chen Gang.

   - A plug merge fix from Alireza Haghdoost.

   - Conversion of __get_cpu_var() from Christoph Lameter.

   - Fix for sector_div() with 64-bit divider from Geert Uytterhoeven.

   - A fix for a race between request completion and the timeout
     handling from Jeff Moyer.  This is what caused the merge conflict
     with blk-mq/core, in case you are looking at that.

   - A dm stacking fix from Mike Snitzer.

   - A code consolidation fix and duplicated code removal from Kent
     Overstreet.

   - A handful of block bug fixes from Mikulas Patocka, fixing a loop
     crash and memory corruption on blk cg.

   - Elevator switch bug fix from Tomoki Sekiyama.

  A heads-up that I had to rebase this branch.  Initially the immutable
  bio_vecs had been queued up for inclusion, but a week later, it became
  clear that it wasn't fully cooked yet.  So the decision was made to
  pull this out and postpone it until 3.14.  It was a straight forward
  rebase, just pruning out the immutable series and the later fixes of
  problems with it.  The rest of the patches applied directly and no
  further changes were made"

* 'for-3.13/core' of git://git.kernel.dk/linux-block: (31 commits)
  block: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
  block: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
  block: Do not call sector_div() with a 64-bit divisor
  kernel: trace: blktrace: remove redundent memcpy() in compat_blk_trace_setup()
  block: Consolidate duplicated bio_trim() implementations
  block: Use rw_copy_check_uvector()
  block: Enable sysfs nomerge control for I/O requests in the plug list
  block: properly stack underlying max_segment_size to DM device
  elevator: acquire q->sysfs_lock in elevator_change()
  elevator: Fix a race in elevator switching and md device initialization
  block: Replace __get_cpu_var uses
  bdi: test bdi_init failure
  block: fix a probe argument to blk_register_region
  loop: fix crash if blk_alloc_queue fails
  blk-core: Fix memory corruption if blkcg_init_queue fails
  block: fix race between request completion and timeout handling
  blktrace: Send BLK_TN_PROCESS events to all running traces
  blk-mq: don't disallow request merges for req->special being set
  blk-mq: mq plug list breakage
  blk-mq: fix for flush deadlock
  ...

Pull VFS fixes from Al Viro:
 "Several fixes, mostly for regressions in the last pile.  Howeover,
  prepend_path() forgetting to reininitalize dentry/vfsmount is in 3.12
  as well and qib_fs had been leaking all along..."

The unpaired RCU lock issue was also independently reported by Dave
Jones with his fuzzer tool..

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  qib_fs: fix (some) dcache abuses
  prepend_path() needs to reinitialize dentry/vfsmount/mnt on restarts
  fix unpaired rcu lock in prepend_path()
  locks: missing unlock on error in generic_add_lease()
  aio: checking for NULL instead of IS_ERR

Pull ARM updates from Russell King:
 "Included in this series are:

   1. BE8 (modern big endian) changes for ARM from Ben Dooks
   2. big.Little support from Nicolas Pitre and Dave Martin
   3. support for LPAE systems with all system memory above 4GB
   4. Perf updates from Will Deacon
   5. Additional prefetching and other performance improvements from Will.
   6. Neon-optimised AES implementation fro Ard.
   7. A number of smaller fixes scattered around the place.

  There is a rather horrid merge conflict in tools/perf - I was never
  notified of the conflict because it originally occurred between Will's
  tree and other stuff.  Consequently I have a resolution which Will
  forwarded me, which I'll forward on immediately after sending this
  mail.

  The other notable thing is I'm expecting some build breakage in the
  crypto stuff on ARM only with Ard's AES patches.  These were merged
  into a stable git branch which others had already pulled, so there's
  little I can do about this.  The problem is caused because these
  patches have a dependency on some code in the crypto git tree - I
  tried requesting a branch I can pull to resolve these, and all I got
  each time from the crypto people was "we'll revert our patches then"
  which would only make things worse since I still don't have the
  dependent patches.  I've no idea what's going on there or how to
  resolve that, and since I can't split these patches from the rest of
  this pull request, I'm rather stuck with pushing this as-is or
  reverting Ard's patches.

  Since it should "come out in the wash" I've left them in - the only
  build problems they seem to cause at the moment are with randconfigs,
  and since it's a new feature anyway.  However, if by -rc1 the
  dependencies aren't in, I think it'd be best to revert Ard's patches"

I resolved the perf conflict roughly as per the patch sent by Russell,
but there may be some differences.  Any errors are likely mine.  Let's
see how the crypto issues work out..

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits)
  ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h"
  ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg().
  ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h
  ARM: 7871/1: amba: Extend number of IRQS
  ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise()
  ARM: 7872/1: Support arch_irq_work_raise() via self IPIs
  ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode
  ARM: 7878/1: nommu: Implement dummy early_paging_init()
  ARM: 7876/1: clear Thumb-2 IT state on exception handling
  ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}()
  ARM: footbridge: fix build warnings for netwinder
  ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu
  ARM: fix misplaced arch_virt_to_idmap()
  ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown
  ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation
  ARM: 7869/1: remove unused XSCALE_PMU Kconfig param
  ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t
  ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments
  ARM: 7862/1: pcpu: replace __get_cpu_var_uses
  ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code
  ...

Pull DMA mask updates from Russell King:
 "This series cleans up the handling of DMA masks in a lot of drivers,
  fixing some bugs as we go.

  Some of the more serious errors include:
   - drivers which only set their coherent DMA mask if the attempt to
     set the streaming mask fails.
   - drivers which test for a NULL dma mask pointer, and then set the
     dma mask pointer to a location in their module .data section -
     which will cause problems if the module is reloaded.

  To counter these, I have introduced two helper functions:
   - dma_set_mask_and_coherent() takes care of setting both the
     streaming and coherent masks at the same time, with the correct
     error handling as specified by the API.
   - dma_coerce_mask_and_coherent() which resolves the problem of
     drivers forcefully setting DMA masks.  This is more a marker for
     future work to further clean these locations up - the code which
     creates the devices really should be initialising these, but to fix
     that in one go along with this change could potentially be very
     disruptive.

  The last thing this series does is prise away some of Linux's addition
  to "DMA addresses are physical addresses and RAM always starts at
  zero".  We have ARM LPAE systems where all system memory is above 4GB
  physical, hence having DMA masks interpreted by (eg) the block layers
  as describing physical addresses in the range 0..DMAMASK fails on
  these platforms.  Santosh Shilimkar addresses this in this series; the
  patches were copied to the appropriate people multiple times but were
  ignored.

  Fixing this also gets rid of some ARM weirdness in the setup of the
  max*pfn variables, and brings ARM into line with every other Linux
  architecture as far as those go"

* 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-arm: (52 commits)
  ARM: 7805/1: mm: change max*pfn to include the physical offset of memory
  ARM: 7797/1: mmc: Use dma_max_pfn(dev) helper for bounce_limit calculations
  ARM: 7796/1: scsi: Use dma_max_pfn(dev) helper for bounce_limit calculations
  ARM: 7795/1: mm: dma-mapping: Add dma_max_pfn(dev) helper function
  ARM: 7794/1: block: Rename parameter dma_mask to max_addr for blk_queue_bounce_limit()
  ARM: DMA-API: better handing of DMA masks for coherent allocations
  ARM: 7857/1: dma: imx-sdma: setup dma mask
  DMA-API: firmware/google/gsmi.c: avoid direct access to DMA masks
  DMA-API: dcdbas: update DMA mask handing
  DMA-API: dma: edma.c: no need to explicitly initialize DMA masks
  DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks
  DMA-API: crypto: remove last references to 'static struct device *dev'
  DMA-API: crypto: fix ixp4xx crypto platform device support
  DMA-API: others: use dma_set_coherent_mask()
  DMA-API: staging: use dma_set_coherent_mask()
  DMA-API: usb: use new dma_coerce_mask_and_coherent()
  DMA-API: usb: use dma_set_coherent_mask()
  DMA-API: parport: parport_pc.c: use dma_coerce_mask_and_coherent()
  DMA-API: net: octeon: use dma_coerce_mask_and_coherent()
  DMA-API: net: nxp/lpc_eth: use dma_coerce_mask_and_coherent()
  ...

* lookup_one_len() really wants i_mutex held on directory.
* leaks galore - just mount ipathfs, then
cd /sys/bus/pci/drivers/qib_ib; echo *:*:*.* >unbind
on a box with that card present and try to umount ipathfs...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

... and equivalent is needed in 3.12; it's broken there as well
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

We should unlock here before returning.

Fixes: df4e8d2c ('locks: implement delegations')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

alloc_anon_inode() returns an ERR_PTR(), it doesn't return NULL.

Fixes: 71ad7490 ('rework aio migrate pages to use aio fs')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull networking updates from David Miller:

 1) The addition of nftables.  No longer will we need protocol aware
    firewall filtering modules, it can all live in userspace.

    At the core of nftables is a, for lack of a better term, virtual
    machine that executes byte codes to inspect packet or metadata
    (arriving interface index, etc.) and make verdict decisions.

    Besides support for loading packet contents and comparing them, the
    interpreter supports lookups in various datastructures as
    fundamental operations.  For example sets are supports, and
    therefore one could create a set of whitelist IP address entries
    which have ACCEPT verdicts attached to them, and use the appropriate
    byte codes to do such lookups.

    Since the interpreted code is composed in userspace, userspace can
    do things like optimize things before giving it to the kernel.

    Another major improvement is the capability of atomically updating
    portions of the ruleset.  In the existing netfilter implementation,
    one has to update the entire rule set in order to make a change and
    this is very expensive.

    Userspace tools exist to create nftables rules using existing
    netfilter rule sets, but both kernel implementations will need to
    co-exist for quite some time as we transition from the old to the
    new stuff.

    Kudos to Patrick McHardy, Pablo Neira Ayuso, and others who have
    worked so hard on this.

 2) Daniel Borkmann and Hannes Frederic Sowa made several improvements
    to our pseudo-random number generator, mostly used for things like
    UDP port randomization and netfitler, amongst other things.

    In particular the taus88 generater is updated to taus113, and test
    cases are added.

 3) Support 64-bit rates in HTB and TBF schedulers, from Eric Dumazet
    and Yang Yingliang.

 4) Add support for new 577xx tigon3 chips to tg3 driver, from Nithin
    Sujir.

 5) Fix two fatal flaws in TCP dynamic right sizing, from Eric Dumazet,
    Neal Cardwell, and Yuchung Cheng.

 6) Allow IP_TOS and IP_TTL to be specified in sendmsg() ancillary
    control message data, much like other socket option attributes.
    From Francesco Fusco.

 7) Allow applications to specify a cap on the rate computed
    automatically by the kernel for pacing flows, via a new
    SO_MAX_PACING_RATE socket option.  From Eric Dumazet.

 8) Make the initial autotuned send buffer sizing in TCP more closely
    reflect actual needs, from Eric Dumazet.

 9) Currently early socket demux only happens for TCP sockets, but we
    can do it for connected UDP sockets too.  Implementation from Shawn
    Bohrer.

10) Refactor inet socket demux with the goal of improving hash demux
    performance for listening sockets.  With the main goals being able
    to use RCU lookups on even request sockets, and eliminating the
    listening lock contention.  From Eric Dumazet.

11) The bonding layer has many demuxes in it's fast path, and an RCU
    conversion was started back in 3.11, several changes here extend the
    RCU usage to even more locations.  From Ding Tianhong and Wang
    Yufen, based upon suggestions by Nikolay Aleksandrov and Veaceslav
    Falico.

12) Allow stackability of segmentation offloads to, in particular, allow
    segmentation offloading over tunnels.  From Eric Dumazet.

13) Significantly improve the handling of secret keys we input into the
    various hash functions in the inet hashtables, TCP fast open, as
    well as syncookies.  From Hannes Frederic Sowa.  The key fundamental
    operation is "net_get_random_once()" which uses static keys.

    Hannes even extended this to ipv4/ipv6 fragmentation handling and
    our generic flow dissector.

14) The generic driver layer takes care now to set the driver data to
    NULL on device removal, so it's no longer necessary for drivers to
    explicitly set it to NULL any more.  Many drivers have been cleaned
    up in this way, from Jingoo Han.

15) Add a BPF based packet scheduler classifier, from Daniel Borkmann.

16) Improve CRC32 interfaces and generic SKB checksum iterators so that
    SCTP's checksumming can more cleanly be handled.  Also from Daniel
    Borkmann.

17) Add a new PMTU discovery mode, IP_PMTUDISC_INTERFACE, which forces
    using the interface MTU value.  This helps avoid PMTU attacks,
    particularly on DNS servers.  From Hannes Frederic Sowa.

18) Use generic XPS for transmit queue steering rather than internal
    (re-)implementation in virtio-net.  From Jason Wang.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits)
  random32: add test cases for taus113 implementation
  random32: upgrade taus88 generator to taus113 from errata paper
  random32: move rnd_state to linux/random.h
  random32: add prandom_reseed_late() and call when nonblocking pool becomes initialized
  random32: add periodic reseeding
  random32: fix off-by-one in seeding requirement
  PHY: Add RTL8201CP phy_driver to realtek
  xtsonic: add missing platform_set_drvdata() in xtsonic_probe()
  macmace: add missing platform_set_drvdata() in mace_probe()
  ethernet/arc/arc_emac: add missing platform_set_drvdata() in arc_emac_probe()
  ipv6: protect for_each_sk_fl_rcu in mem_check with rcu_read_lock_bh
  vlan: Implement vlan_dev_get_egress_qos_mask as an inline.
  ixgbe: add warning when max_vfs is out of range.
  igb: Update link modes display in ethtool
  netfilter: push reasm skb through instead of original frag skbs
  ip6_output: fragment outgoing reassembled skb properly
  MAINTAINERS: mv643xx_eth: take over maintainership from Lennart
  net_sched: tbf: support of 64bit rates
  ixgbe: deleting dfwd stations out of order can cause null ptr deref
  ixgbe: fix build err, num_rx_queues is only available with CONFIG_RPS
  ...

Merge first patch-bomb from Andrew Morton:
 "Quite a lot of other stuff is banked up awaiting further
  next->mainline merging, but this batch contains:

   - Lots of random misc patches
   - OCFS2
   - Most of MM
   - backlight updates
   - lib/ updates
   - printk updates
   - checkpatch updates
   - epoll tweaking
   - rtc updates
   - hfs
   - hfsplus
   - documentation
   - procfs
   - update gcov to gcc-4.7 format
   - IPC"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (269 commits)
  ipc, msg: fix message length check for negative values
  ipc/util.c: remove unnecessary work pending test
  devpts: plug the memory leak in kill_sb
  ./Makefile: export initial ramdisk compression config option
  init/Kconfig: add option to disable kernel compression
  drivers: w1: make w1_slave::flags long to avoid memory corruption
  drivers/w1/masters/ds1wm.cuse dev_get_platdata()
  drivers/memstick/core/ms_block.c: fix unreachable state in h_msb_read_page()
  drivers/memstick/core/mspro_block.c: fix attributes array allocation
  drivers/pps/clients/pps-gpio.c: remove redundant of_match_ptr
  kernel/panic.c: reduce 1 byte usage for print tainted buffer
  gcov: reuse kbasename helper
  kernel/gcov/fs.c: use pr_warn()
  kernel/module.c: use pr_foo()
  gcov: compile specific gcov implementation based on gcc version
  gcov: add support for gcc 4.7 gcov format
  gcov: move gcov structs definitions to a gcc version specific file
  kernel/taskstats.c: return -ENOMEM when alloc memory fails in add_del_listener()
  kernel/taskstats.c: add nla_nest_cancel() for failure processing between nla_nest_start() and nla_nest_end()
  kernel/sysctl_binary.c: use scnprintf() instead of snprintf()
  ...

Pull vfs updates from Al Viro:
 "All kinds of stuff this time around; some more notable parts:

   - RCU'd vfsmounts handling
   - new primitives for coredump handling
   - files_lock is gone
   - Bruce's delegations handling series
   - exportfs fixes

  plus misc stuff all over the place"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (101 commits)
  ecryptfs: ->f_op is never NULL
  locks: break delegations on any attribute modification
  locks: break delegations on link
  locks: break delegations on rename
  locks: helper functions for delegation breaking
  locks: break delegations on unlink
  namei: minor vfs_unlink cleanup
  locks: implement delegations
  locks: introduce new FL_DELEG lock flag
  vfs: take i_mutex on renamed file
  vfs: rename I_MUTEX_QUOTA now that it's not used for quotas
  vfs: don't use PARENT/CHILD lock classes for non-directories
  vfs: pull ext4's double-i_mutex-locking into common code
  exportfs: fix quadratic behavior in filehandle lookup
  exportfs: better variable name
  exportfs: move most of reconnect_path to helper function
  exportfs: eliminate unused "noprogress" counter
  exportfs: stop retrying once we race with rename/remove
  exportfs: clear DISCONNECTED on all parents sooner
  exportfs: more detailed comment for path_reconnect
  ...

Pull dlm fix from David Teigland:
 "This set includes a single fix to resolve to a race that could cause
  lockspace shutdown to incorrectly return -EBUSY"

* tag 'dlm-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: Avoid that dlm_release_lockspace() incorrectly returns -EBUSY

Pull UBI changes from Artem Bityutskiy:
 "A bunch of fixes for the fastmap feature, which is still new and
  rather experimental.  It looks like it starts getting more users.

  No significant changes for the "classical" non-fastmap UBI"

* tag 'upstream-3.13-rc1' of git://git.infradead.org/linux-ubi:
  UBI: Add some asserts to ubi_attach_fastmap()
  UBI: Fix memory leak in ubi_attach_fastmap() error path
  UBI: simplify image sequence test
  UBI: fastmap: fix backward compatibility with image_seq
  UBI: Call scan_all() with correct offset in error case
  UBI: Fix error path in scan_pool()
  UBI: fix refill_wl_user_pool()

Pull ubifs changes from Artem Bityutskiy:
 "Mostly fixes for the power cut emulation UBIFS mode, and only one
  functional change which fixes a return error code"

* tag 'upstream-3.13-rc1' of git://git.infradead.org/linux-ubifs:
  UBIFS: correct data corruption range
  UBIFS: fix return code
  UBIFS: remove unnecessary code in ubifs_garbage_collect

Pull fuse updates from Miklos Szeredi:
 "This adds a ->writepage() implementation to fuse, improving mmaped
  writeout and paving the way for buffered writeback.

  And there's a patch to add a fix minor number for /dev/cuse, similarly
  to /dev/fuse"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: writepages: protect secondary requests from fuse file release
  fuse: writepages: update bdi writeout when deleting secondary request
  fuse: writepages: crop secondary requests
  fuse: writepages: roll back changes if request not found
  cuse: add fix minor number to /dev/cuse
  fuse: writepage: skip already in flight
  fuse: writepages: handle same page rewrites
  fuse: writepages: fix aggregation
  fuse: fix race in fuse_writepages()
  fuse: Implement writepages callback
  fuse: don't BUG on no write file
  fuse: lock page in mkwrite
  fuse: Prepare to handle multiple pages in writeback
  fuse: Getting file for writeback helper

Pull ext[23], udf and quota fixes from Jan Kara:
 "Assorted fixes in quota, ext2, ext3 & udf.

  Probably the most important is a fix of fs corruption issue in ext2
  XIP support (OTOH xip is rarely used)"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  ext2: Fix fs corruption in ext2_get_xip_mem()
  quota: info leak in quota_getquota()
  jbd: Revert "jbd: remove dependency on __GFP_NOFAIL"
  udf: fix for pathetic mount times in case of invalid file system
  ext3: Count journal as bsddf overhead in ext3_statfs

Pull f2fs updates from Jaegeuk Kim:
 "This patch-set includes the following major enhancement patches.
   - add a sysfs to control reclaiming free segments
   - enhance the f2fs global lock procedures
   - enhance the victim selection flow
   - wait for selected node blocks during fsync
   - add some tracepoints
   - add a config to remove abundant BUG_ONs

  The other bug fixes are as follows.
   - fix deadlock on acl operations
   - fix some bugs with respect to orphan inodes

  And, there are a bunch of cleanups"

* tag 'for-f2fs-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (42 commits)
  f2fs: issue more large discard command
  f2fs: fix memory leak after kobject init failed in fill_super
  f2fs: cleanup waiting routine for writeback pages in cp
  f2fs: avoid to use a NULL point in destroy_segment_manager
  f2fs: remove unnecessary TestClearPageError when wait pages writeback
  f2fs: update f2fs document
  f2fs: avoid to wait all the node blocks during fsync
  f2fs: check all ones or zeros bitmap with bitops for better mount performance
  f2fs: change the method of calculating the number summary blocks
  f2fs: fix calculating incorrect free size when update xattr in __f2fs_setxattr
  f2fs: add an option to avoid unnecessary BUG_ONs
  f2fs: introduce CONFIG_F2FS_CHECK_FS for BUG_ON control
  f2fs: fix a deadlock during init_acl procedure
  f2fs: clean up acl flow for better readability
  f2fs: remove unnecessary segment bitmap updates
  f2fs: add tracepoint for vm_page_mkwrite
  f2fs: add tracepoint for set_page_dirty
  f2fs: remove redundant set_page_dirty from write_compacted_summaries
  f2fs: add reclaiming control by sysfs
  f2fs: introduce f2fs_balance_fs_bg for some background jobs
  ...

Pull cgroup changes from Tejun Heo:
 "Not too much activity this time around.  css_id is finally killed and
  a minor update to device_cgroup"

* 'for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  device_cgroup: remove can_attach
  cgroup: kill css_id
  memcg: stop using css id
  memcg: fail to create cgroup if the cgroup id is too big
  memcg: convert to use cgroup id
  memcg: convert to use cgroup_is_descendant()

Pull libata changes from Tejun Heo:
 "Nothing too interesting.  Only two minor fixes in libata core.  Most
  changes are specific to hardware which isn't too common"

* 'for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: Add Device IDs for Intel Wildcat Point-LP
  sata_rcar: Convert to clk_prepare/unprepare
  drivers/libata: Set max sector to 65535 for Slimtype DVD A DS8A9SH drive
  libata: Add some missing command descriptions
  sata_highbank: clear whole array in highbank_initialize_phys()
  ahci: disabled FBS prior to issuing software reset
  libata: Fix display of sata speed
  ahci: imx: setup power saving methods
  ata_piix: minor typo and a printk fix
  ahci: Changing two module params with static and __read_mostly