- 25 Apr, 2013 6 commits
-
-
Jani Nikula authored
v2: Make TRANSCODER_EDP handling more explicit. (Imre) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Jani Nikula authored
With the previous work asle and gse interrupt handlers should now be functionally the same. Drop the duplicated code. v2: Drop intel_opregion_gse_intr() also in the !CONFIG_ACPI path. (Damien) Signed-off-by:
Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
-
Jani Nikula authored
In theory, the BIOS should not even request these from us now that we aren't claiming we support these, but when it does anyway, don't pretend it succeeded. It should be the right thing to do, but might confuse the BIOS. Signed-off-by:
-
Jani Nikula authored
In theory, this should prevent the BIOS from requesting them from us, and this should be the right thing. In practice, this is not always the case, and might surprise the BIOS. Signed-off-by:
-
Jani Nikula authored
Backlight data and registers are fiddled through LVDS/eDP modeset enable/disable hooks, backlight sysfs files, asle interrupts, and register save/restore. Protect the backlight related registers and driver private fields using a spinlock. The locking in register save/restore covers a little more than is strictly necessary, including non-modeset case, for simplicity. v2: Cover register access, save/restore, i915_read_blc_pwm_ctl() and code paths leading there. Signed-off-by: -
Jani Nikula authored
In preparation of adding locking to backlight, make max backlight value (the modulation frequency the PWM duty cycle value must not exceed) internal to intel_panel.c. Have intel_panel_set_backlight() accept a caller defined range for level, and scale input to max backlight value internally. Clean up intel_panel_get_max_backlight() and usage internally. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
- 24 Apr, 2013 6 commits
-
-
Daniel Vetter authored
The LPT PCH only supports 8bpc, so we need to force the pipe bpp to the right value. Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Daniel Vetter authored
Prevents black screens when using 30bpp framebuffers on my HDMI screens here. The DP input on the same screen though reports a 1.4 EDID with the correct 8bpc limit set. v2: Actually check for the right thing! Reviewed-by:
-
Daniel Vetter authored
Our rps code relies on the interrupts being off to prevent re-arming of the work items at inopportune moments. Also drop the redundant cancel_work for the main rps work, disable_gt_powersave already takes care of that. Finally add a WARN_ON to ensure we obey that piece of ordering constraint. Long term I want to lock down the setup/teardown code in a similar way to how we painstakingly check modeset sequence constraints already. v2: Disable polling after hpd handling is shut down - since Egbert's hpd irq storm handling the hotplug work can re-arm the polling handler. Spotted by Jani Nikula. Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
Jesse Barnes authored
We don't want to write reserved regs here, and may want to do other bits in the future, so split it out. Reported-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by:
-
Jesse Barnes authored
Ville noticed this while doing another review; we may as well cancel this work just to make sure we don't try anything fancy after disabling the RPS interfaces. Reported-by:
-
Jesse Barnes authored
On VLV, the Punit doesn't automatically drop the GPU to it's minimum voltage level when entering RC6, so we arm a timer to do it for us from the RPS interrupt handler. It'll generally only fire when we go idle (or if for some reason there's a long delay between RPS interrupts), but won't be re-armed again until the next RPS event, so shouldn't affect power consumption after we go idle and it triggers. v2: use delayed work instead of timer + work queue combo (Ville) v3: fix up delayed work cancel (must be outside lock) (Daniel) fix up delayed work handling func for delayed work (Jesse) v4: cancel delayed work before RPS shutdown (Jani) pass delay not absolute time to mod_delayed_work (Jani) Signed-off-by:
-
- 23 Apr, 2013 9 commits
-
-
Damien Lespiau authored
Signed-off-by:
-
Damien Lespiau authored
Let's introduce one more of those orthogonal feature macros. This should hopefully make the code more readable and make things easier for new platform enabling. This time, HAS_FPGA_DBG_UNCLAIMED() is true for platforms that have bit 31 of FPGA_DBG able to signal unclaimed writes. Signed-off-by:
-
Damien Lespiau authored
Signed-off-by:
-
Damien Lespiau authored
Signed-off-by:
-
Damien Lespiau authored
This way, when adding a device flag we don't have to manually maintain that list. v2: undefine the helper macros (Jani Nikula, Daniel Vetter) Signed-off-by:
-
Damien Lespiau authored
DEV_INFO_FOR_FLAG() now takes 2 parameters: • A function to apply to the flag • A separator This will allow us to use the macro twice in the DRM_DEBUG_DRIVER() call of i915_dump_device_info(). v2: Fix a typo in the subject (Jani Nikula) v3: Undef the helper macros (Jani Nikula, Daniel vetter) Reviewed-by:
-
Egbert Eich authored
Instead of calling into the DRM helper layer to poll all connectors for changes in connected displays probe only those connectors which have received a hotplug event. v2: Resolved conflicts with changes in previous commits. Renamed function and and added a WARN_ON() to warn of intel_hpd_irq_event() from being called without mode_config.mutex held - suggested by Jani Nikula. Signed-off-by:Egbert Eich <eich@suse.de> Reviewed-by:
-
Egbert Eich authored
This way it is possible to limit 're'-detect() of displays to connectors which have received an HPD event. v2: Reordered drm_i915_private: Move hpd_event_bits to hpd state tracking. v3: Fixed merge conflicts with previous patches. Signed-off-by:
-
Jesse Barnes authored
We need to hold the rps lock around punit access. Reported-by:
Kenneth Graunke <kenneth@whitecape.org> Signed-off-by:
-
- 22 Apr, 2013 3 commits
-
-
Kenneth Graunke authored
Now that we have function pointers, it's cleaner to just create a new per-platform PTE encoding function. This should be identical in behavior to the previous code. v2: Drop accidental inline keyword on hsw_pte_encode. Signed-off-by:
-
Kenneth Graunke authored
On Bay Trail, bit 1 means "writeable by the GPU." Failing to set that means basically anything using the GPU will cause hangs. v2: Drop accidental inline keyword on byt_pte_encode. Signed-off-by:
-
Kenneth Graunke authored
Sandybridge/Ivybridge, Bay Trail, and Haswell all have slightly different page table entry formats. Rather than polluting one function with generation checks, simply use a function pointer and set up the correct PTE encoding function at startup. v2: Move the gen6_gtt_pte_t typedef to i915_drv.h so that the function pointers and implementations have identical signatures. Also remove inline keyword on gen6_pte_encode. Both suggested by Jani Nikula. Signed-off-by:Jani Nikula <jani.nikula@linux.intel.com> Tested-by: Daniel Leung <daniel.leung@linux.intel.com> [v1] Signed-off-by:
-
- 20 Apr, 2013 1 commit
-
-
Ville Syrjälä authored
This allows unifying a bunch of the PLL calculations and whatnot. Signed-off-by:
-
- 19 Apr, 2013 8 commits
-
-
Jesse Barnes authored
Minor cleanup. Would be nice to use an enum for channel in the DPIO macros so we don't mix up pipes and channels, but that's for another patch. Signed-off-by:
-
Damien Lespiau authored
We are trying to have more platform-orthogonal pieces of code. The DDI code shouldn't mention Haswell. v2: Fix the email address Signed-off-by:
-
Ville Syrjälä authored
Shame on me for not putting the bit definitions next to the register definition in the first place. Signed-off-by:
-
Paulo Zanoni authored
... inside haswell_get_pipe_config. Because there's one TRANS_DDI_FUNC_CTL register per CPU transcoder, not per pipe. This solves "unclaimed register" messages when booting with eDP only and using the i915.disable_power_well=1. Also fix a comment and remove an useless empty line. The error messages were caused by: commit 88adfff1 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Mar 28 10:42:01 2013 +0100 drm/i915: hw readout support for ->has_pch_encoders Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
-
Paulo Zanoni authored
This fixes "unclaimed register" messages when booting with eDP only and i915.disable_power_well=1. The error messages were caused by: commit 0e8ffe1b Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Mar 28 10:42:00 2013 +0100 drm/i915: add hw state readout/checking for pipe_config Signed-off-by:
-
Paulo Zanoni authored
This is bad news and shouldn't be happening. V2: Rebase. Signed-off-by:
-
Paulo Zanoni authored
In this commit we enable both CPU and PCH FIFO underrun reporting and start reporting them. We follow a few rules: - after we receive one of these errors, we mask the interrupt, so we won't get an "interrupt storm" and we also won't flood dmesg; - at each mode set we enable the interrupts again, so we'll see each message at most once per mode set; - in the specific places where we need to ignore the errors, we completely mask the interrupts. The downside of this patch is that since we're completely disabling (masking) the interrupts instead of just not printing error messages, we will mask more than just what we want on IVB/HSW CPU interrupts (due to GEN7_ERR_INT) and on CPT/PPT/LPT PCHs (due to SERR_INT). So when we decide to mask PCH FIFO underruns for pipe A on CPT, we'll also be masking PCH FIFO underruns for pipe B, because both are reported by SERR_INT, which has to be either completely enabled or completely disabled (in othe words, there's no way to disable/enable specific bits of GEN7_ERR_INT and SERR_INT). V2: Rename some functions and variables, downgrade messages to DRM_DEBUG_DRIVER and rebase. Signed-off-by: -
Jesse Barnes authored
In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by:Pallavi G <pallavi.g@intel.com> Signed-off-by:
Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by:
Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by:
Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by:
-
- 18 Apr, 2013 7 commits
-
-
Jesse Barnes authored
This is a reset feature we don't actually need. Signed-off-by:
-
Pallavi G authored
Program few Tx buffer Swing control settings through DPIO. v2: fix up codingstyle (Daniel) call from set_signal_levels (Ville, Daniel) use proper port numbers (Jesse) Signed-off-by:Yogesh M <yogesh.mohan.marimuthu@intel.com> Signed-off-by:
-
Daniel Vetter authored
Stolen from a patch with the below impressive sob-section. Signed-off-by:
-
Daniel Vetter authored
Magic updates. v2: use 64 bit types and math (Ville) v3: Trim out all the m/n/p calculation changes since they are still under discussion. Instead squash in a fixup for hdmi limits which slipped into a different patch. Signed-off-by:
-
Jesse Barnes authored
Uses slightly different interfaces than other platforms. v2: track actual set freq, not requested (Rohit) fix debug prints in init code (Jesse) v3: don't write sleep reg (Jesse) re-add RC6 wake limit write (Ben) fixup thresholds to match other platforms (Ben) clean up mem freq calculation (Ben) clean up debug prints (Ben) v4: move defines from punit patch (Ville) v5: remove writes to nonexistent regs (Jesse) put RP and RC regs together (Jesse) fix RC6 enable (Jesse) v6: use correct fuse reads from NC (Jesse) split out min/max funcs for use in sysfs (Jesse) add debugfs & sysfs freq controls (Jesse) v7: update with Ben's hw_max changes (Jesse) Signed-off-by: -
Jesse Barnes authored
When requesting frequency changes or querying status from the Punit, we need to use an opcode that corresponds to the frequency, taking into account the memory frequency. Signed-off-by:
Ben Widawsky <ben@bwidawsk.net> Signed-off-by:
-
Ville Syrjälä authored
Add sprite_name() macro which should be used with the kind of sprites that are fixed to pipes (gen4.5+). Also use dev_priv->num_plane to calculate the sprite index insted assuming two sprites per pipe. This should make it print the right name. Signed-off-by:
-
