- 03 Jul, 2011 40 commits
-
-
Dan Williams authored
In isci_task_request_complete() we save the response/sense data from the command. Make sure isci_tmf has enough space to hold the full response. [ it does not look like we actually use this data, and response_data_len/sense_data_len should be specifying the byte count, in any event do the simple fix first so we don't corrupt memory ] Reported-by: Adam Gruchala <adam.gruchala@intel.com> Tested-by: Edmund Nadolski <edmund.nadolski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Rather than return an error code and update a pointer that was passed by reference just return the request object directly (or null if allocation failed). Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Every single i/o or event completion incurs a test and branch to see if the cycle bit changed. For power-of-2 queue sizes the cycle bit can be read directly from the rollover of the queue pointer. Likely premature optimization, but the hidden if() and hidden assignments / side-effects in the macros were already asking to be cleaned up. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
A tag is a 16 bit number where the upper four bits is a sequence number and the remainder is the task context index (tci). Sanitize the macro names and shave 256-bytes out of scic_sds_controller by reducing the size of io_request_sequence. scic_sds_io_tag_construct --> ISCI_TAG scic_sds_io_tag_get_sequence --> ISCI_TAG_SEQ scic_sds_io_tag_get_index() --> ISCI_TAG_TCI scic_sds_io_sequence_increment() [delete / open code] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
The circ_buf macros are ~6% faster, as measured by perf, because they take advantage of power-of-two math assumptions i.e. no test and branch for rollover. Their semantics are clearer than the hidden side effects in pool.h (like sci_pool_get() which hides an assignment). Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
Some targets exceed the hang detect timer. Use the OS timeout to catch hung tasks. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
In the case where the hard reset process fails, each link in the port is put through a link reset sequence. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
The remote node context should only signal a device reset condition in a suspended state. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Walk through the list of pending requests being careful to consider that multiple requests can be terminated when the lock is dropped (i.e. invalidating the 'next' reference established by list_for_each_entry_safe). Also noticed that all callers to isci_terminate_pending_requests() specifying terminating, so just drop the parameter. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
In the situation where a termination of an I/O times-out, make sure that the linkage from the request to the task is severed completely. Also make sure that the selection of tasks to terminate occurs under scic_lock. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
Requests that fail at start because of a reset pending condition must be set to complete in order to allow for later cleanup. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
There are situations with slow expanders in which a first attempt to execute an SMP request will fail with a timeout. Immediate subsequent retries will generally succeed. This change makes sure SMP I/O failures are immediately failed to libsas so that retries happen with no discovery process timeout delay. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
When resetting a sata device in the domain we have seen occasions where libsas prematurely marks a device gone in the time it takes for the device to re-establish the link. This plays badly with software raid arrays. Other libsas drivers have non-uniform delays in their reset handlers to try to cover this condition, but not sufficient to close the hole. Given that a sata device can take many seconds to recover we filter bcns and poll for the device reattach state before notifying libsas that the port needs the domain to be rediscovered. Once this has been proven out at the lldd level we can think about uplevelling this feature to a common implementation in libsas. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> [ use kzalloc instead of kmem_cache ] Signed-off-by: Dave Jiang <dave.jiang@intel.com> [ use eventq and time macros ] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
Delay after bringing up the RNC to allow for resumption latency. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
The old 'core' had aspirations of running in severely memory constrained environments like bios option-rom, it's not needed for Linux and gets in the way of other cleanups (like unifying/reducing the number of structure members in scic_sds_controller/isci_host). This also fixes a theoretical bug in that the driver would blindly override the silicon advertised limits for number of ports, task contexts, and remote node contexts. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Adam Gruchala authored
C0 silicon updates the pci revision id and requires new AFE parameters for phy signal integrity. Support for previous silicon revisions is deprecated (it's also broken for the theoretical case of multiple controllers at different silicon revisions, all the more reason to get it removed as soon as possible) Signed-off-by: Adam Gruchala <adam.gruchala@intel.com> [fixed up deprecated silicon support] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Edmund Nadolski authored
Additional state machine cleanups: o Remove static functions sci_state_machine_exit_state() and sci_state_machine_enter_state() o Combines sci_base_state_machine_construct() and sci_base_state_machine_start() into a single function, sci_init_sm() o Remove sci_base_state_machine_stop() which is unused. o Kill state_machine.[ch] Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com> [fixed too large to inline functions] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Edmund Nadolski authored
This cleans up several areas of the state machine mechanism: o Rename sci_base_state_machine_change_state to sci_change_state o Remove sci_base_state_machine_get_state function o Rename 'state_machine' struct member to 'sm' in client structs o Shorten the name of request states o Shorten state machine state names as follows: SCI_BASE_CONTROLLER_STATE_xxx to SCIC_xxx SCI_BASE_PHY_STATE_xxx to SCI_PHY_xxx SCIC_SDS_PHY_STARTING_SUBSTATE_xxx to SCI_PHY_SUB_xxx SCI_BASE_PORT_STATE_xxx to SCI_PORT_xxx and SCIC_SDS_PORT_READY_SUBSTATE_xxx to SCI_PORT_SUB_xxx SCI_BASE_REMOTE_DEVICE_STATE_xxx to SCI_DEV_xxx SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_xxx to SCI_STP_DEV_xxx SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_xxx to SCI_SMP_DEV_xxx SCIC_SDS_REMOTE_NODE_CONTEXT_xxx_STATE to SCI_RNC_xxx Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dave Jiang authored
Newer gcc's are better at identifying "set, but not used" variables. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dave Jiang authored
We can call the EFI get_variable service routine directly to retrieve the EFI variable that holds the OEM parameters table. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dave Jiang authored
It doesn't look like there is any reason to do a kmalloc. We can do the byte swap in place and avoid the allocation. This allow us to remove a kmalloc and a memcpy. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Edmund Nadolski authored
Delete code which is no longer used. Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Edmund Nadolski authored
Replace the timeout_timer in the isci_tmf with a call to wait_for_completion_timeout Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Edmund Nadolski authored
Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Edmund Nadolski authored
Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Edmund Nadolski authored
Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Edmund Nadolski authored
Convert the sata_timeout_timer in the scic_sds_phy struct to use a struct sci_timer Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Edmund Nadolski authored
Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com> [squashed collateral cleanups] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Edmund Nadolski authored
Rather than preallocating a list of timers and doling them out at runtime, embed a struct timerlist in each object that needs one. A struct sci_timer interface is introduced to manage the timer cancellation semantics which currently need to guarantee the timer is cancelled while holding spin_lock(ihost->scic_lock). Since the timeout functions also need to acquire the lock it currently prevents the driver from using del_timer_sync() for runtime cancellations. del_timer_sync() is used however before the objects go out of scope. Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Now that any given object type only has one state_machine we can use container_of() to get back to the given state machine owner. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Unify rnc start{io|task} handlers and delete the state handler infrastructure. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Unify rnc suspend/resume handlers and delete the state handlers. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Unify rnc destruct handlers and delete the state handler. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Unify rnc event handlers and delete the state handler. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Unify the handlers and kill the state handler infrastructure. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Piotr Sawicki authored
Unify the handlers and kill the state handler implementations. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Piotr Sawicki <piotr.sawicki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Piotr Sawicki authored
Unused infrastructure. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Piotr Sawicki <piotr.sawicki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Piotr Sawicki authored
Unify the implementations and remove the state handlers. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Piotr Sawicki <piotr.sawicki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Piotr Sawicki authored
The handler was never used. Signed-off-by: Piotr Sawicki <piotr.sawicki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Piotr Sawicki authored
Implement the stop handlers directly in scic_sds_port_stop() Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Piotr Sawicki <piotr.sawicki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-