- 05 Jun, 2017 40 commits
-
-
Majd Dibbiny authored
commit 95f1ba9a upstream. In the VF driver, module parameter mlx4_log_num_mgm_entry_size was mistakenly overwritten -- and in a manner which overrode the device-managed flow steering option encoded in the parameter. log_num_mgm_entry_size is a global module parameter which affects all ConnectX-3 PFs installed on that host. If a VF changes log_num_mgm_entry_size, this will affect all PFs which are probed subsequent to the change (by disabling DMFS for those PFs). Fixes: 3c439b55 ("mlx4_core: Allow choosing flow steering mode") Signed-off-by:
Majd Dibbiny <majd@mellanox.com> Reviewed-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Eugenia Emantayev authored
commit 745d8ae4 upstream. Spoofcheck can't be enabled if VF MAC is zero. Vice versa, can't zero MAC if spoofcheck is on. Fixes: 8f7ba3ca ('net/mlx4: Add set VF mac address support') Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by:
-
Peter Oberparleiter authored
commit 77759137 upstream. Prevent kernel crashes due to unhandled exceptions raised by the CHSC instruction which may for example be triggered by invalid ioctl data. Fixes: 64150adf ("s390/cio: Introduce generic synchronous CHSC IOCTL") Signed-off-by:
Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Reviewed-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> [bwh: Backported to 3.16: adjust filename] Signed-off-by:
-
Randy Dunlap authored
commit 083fb8ed upstream. Delete stray (second) function description in find_lock_page() kernel-doc notation. Note: scripts/kernel-doc just ignores the second function description. Fixes: 2457aec6 ("mm: non-atomically mark page accessed during page cache allocation where possible") Link: http://lkml.kernel.org/r/b037e9a3-516c-ec02-6c8e-fa5479747ba6@infradead.orgSigned-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
Matthew Wilcox <mawilcox@microsoft.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Raghava Aditya Renukunta authored
commit c421530b upstream. The driver currently checks the SELF_TEST_FAILED first and then KERNEL_PANIC next. Under error conditions(boot code failure) both SELF_TEST_FAILED and KERNEL_PANIC can be set at the same time. The driver has the capability to reset the controller on an KERNEL_PANIC, but not on SELF_TEST_FAILED. Fixed by first checking KERNEL_PANIC and then the others. Fixes: e8b12f0f ([SCSI] aacraid: Add new code for PMC-Sierra's SRC base controller family) Signed-off-by:
Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by:
David Carroll <David.Carroll@microsemi.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Raghava Aditya Renukunta authored
commit 1bff5abc upstream. aac_fib_map_free frees misaligned fib dma memory, additionally it does not free up the whole memory. Fixed by changing the code to free up the correct and full memory allocation. Fixes: e8b12f0f ([SCSI] aacraid: Add new code for PMC-Sierra's SRC based controller family) Signed-off-by:
-
Alexey Kodanev authored
commit eee2faab upstream. We can get SYN with zero tsecr, don't apply offset in this case. Fixes: ee684b6f ("tcp: send packets with a socket timestamp") Signed-off-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Andrey Ryabinin authored
commit ec7cb62d upstream. DCCP doesn't purge timewait sockets on network namespace shutdown. So, after net namespace destroyed we could still have an active timer which will trigger use after free in tw_timer_handler(): BUG: KASAN: use-after-free in tw_timer_handler+0x4a/0xa0 at addr ffff88010e0d1e10 Read of size 8 by task swapper/1/0 Call Trace: __asan_load8+0x54/0x90 tw_timer_handler+0x4a/0xa0 call_timer_fn+0x127/0x480 expire_timers+0x1db/0x2e0 run_timer_softirq+0x12f/0x2a0 __do_softirq+0x105/0x5b4 irq_exit+0xdd/0xf0 smp_apic_timer_interrupt+0x57/0x70 apic_timer_interrupt+0x90/0xa0 Object at ffff88010e0d1bc0, in cache net_namespace size: 6848 Allocated: save_stack_trace+0x1b/0x20 kasan_kmalloc+0xee/0x180 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0x134/0x310 copy_net_ns+0x8d/0x280 create_new_namespaces+0x23f/0x340 unshare_nsproxy_namespaces+0x75/0xf0 SyS_unshare+0x299/0x4f0 entry_SYSCALL_64_fastpath+0x18/0xad Freed: save_stack_trace+0x1b/0x20 kasan_slab_free+0xae/0x180 kmem_cache_free+0xb4/0x350 net_drop_ns+0x3f/0x50 cleanup_net+0x3df/0x450 process_one_work+0x419/0xbb0 worker_thread+0x92/0x850 kthread+0x192/0x1e0 ret_from_fork+0x2e/0x40 Add .exit_batch hook to dccp_v4_ops()/dccp_v6_ops() which will purge timewait sockets on net namespace destruction and prevent above issue. Fixes: f2bf415c ("mib: add net to NET_ADD_STATS_BH") Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Ridge Kennedy authored
commit 12d656af upstream. While destroying a network namespace that contains a L2TP tunnel a "BUG: scheduling while atomic" can be observed. Enabling lockdep shows that this is happening because l2tp_exit_net() is calling l2tp_tunnel_closeall() (via l2tp_tunnel_delete()) from within an RCU critical section. l2tp_exit_net() takes rcu_read_lock_bh() << list_for_each_entry_rcu() >> l2tp_tunnel_delete() l2tp_tunnel_closeall() __l2tp_session_unhash() synchronize_rcu() << Illegal inside RCU critical section >> BUG: sleeping function called from invalid context in_atomic(): 1, irqs_disabled(): 0, pid: 86, name: kworker/u16:2 INFO: lockdep is turned off. CPU: 2 PID: 86 Comm: kworker/u16:2 Tainted: G W O 4.4.6-at1 #2 Hardware name: Xen HVM domU, BIOS 4.6.1-xs125300 05/09/2016 Workqueue: netns cleanup_net 0000000000000000 ffff880202417b90 ffffffff812b0013 ffff880202410ac0 ffffffff81870de8 ffff880202417bb8 ffffffff8107aee8 ffffffff81870de8 0000000000000c51 0000000000000000 ffff880202417be0 ffffffff8107b024 Call Trace: [<ffffffff812b0013>] dump_stack+0x85/0xc2 [<ffffffff8107aee8>] ___might_sleep+0x148/0x240 [<ffffffff8107b024>] __might_sleep+0x44/0x80 [<ffffffff810b21bd>] synchronize_sched+0x2d/0xe0 [<ffffffff8109be6d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8105c7bb>] ? __local_bh_enable_ip+0x6b/0xc0 [<ffffffff816a1b00>] ? _raw_spin_unlock_bh+0x30/0x40 [<ffffffff81667482>] __l2tp_session_unhash+0x172/0x220 [<ffffffff81667397>] ? __l2tp_session_unhash+0x87/0x220 [<ffffffff8166888b>] l2tp_tunnel_closeall+0x9b/0x140 [<ffffffff81668c74>] l2tp_tunnel_delete+0x14/0x60 [<ffffffff81668dd0>] l2tp_exit_net+0x110/0x270 [<ffffffff81668d5c>] ? l2tp_exit_net+0x9c/0x270 [<ffffffff815001c3>] ops_exit_list.isra.6+0x33/0x60 [<ffffffff81501166>] cleanup_net+0x1b6/0x280 ... This bug can easily be reproduced with a few steps: $ sudo unshare -n bash # Create a shell in a new namespace # ip link set lo up # ip addr add 127.0.0.1 dev lo # ip l2tp add tunnel remote 127.0.0.1 local 127.0.0.1 tunnel_id 1 \ peer_tunnel_id 1 udp_sport 50000 udp_dport 50000 # ip l2tp add session name foo tunnel_id 1 session_id 1 \ peer_session_id 1 # ip link set foo up # exit # Exit the shell, in turn exiting the namespace $ dmesg ... [942121.089216] BUG: scheduling while atomic: kworker/u16:3/13872/0x00000200 ... To fix this, move the call to l2tp_tunnel_closeall() out of the RCU critical section, and instead call it from l2tp_tunnel_del_work(), which is running from the l2tp_wq workqueue. Fixes: 2b551c6e ("l2tp: close sessions before initiating tunnel delete") Signed-off-by:
Ridge Kennedy <ridge.kennedy@alliedtelesis.co.nz> Acked-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Steve Wise authored
commit f2625f7d upstream. cma_accept_iw() needs to return an error if conn_params is NULL. Since this is coming from user space, we can crash. Reported-by:
Shaobo He <shaobo@cs.utah.edu> Acked-by:
Sean Hefty <sean.hefty@intel.com> Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Miklos Szeredi authored
commit 2e38bea9 upstream. fuse_file_put() was missing the "force" flag for the RELEASE request when sending synchronously (fuseblk). If this flag is not set, then a sync request may be interrupted before it is dequeued by the userspace filesystem. In this case the OPEN won't be balanced with a RELEASE. Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Fixes: 5a18ec17 ("fuse: fix hang of single threaded fuseblk filesystem") [bwh: Backported to 3.16: - "force" flag is a bitfield - Adjust context] Signed-off-by:
-
Trond Myklebust authored
commit 5a1f6d9e upstream. Account for the "space_limit" field in struct open_write_delegation4. Fixes: 2cebf828 ("NFSv4: Fix the underestimate of NFSv4 open request size") Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Reviewed-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Nicolai Hähnle authored
commit 3089c1df upstream. The vm fault handler relies on the fact that the VMA owns a reference to the BO. However, once mmap_sem is released, other tasks are free to destroy the VMA, which can lead to the BO being freed. Fix two code paths where that can happen, both related to vm fault retries. Found via a lock debugging warning which flagged &bo->wu_mutex as locked while being destroyed. Fixes: cbe12e74 ("drm/ttm: Allow vm fault retries") Signed-off-by:
Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Linus Lüssing authored
commit 51c6b429 upstream. Trying to split and transmit a unicast packet in 16 parts will fail for the final fragment: After having sent the 15th one with a frag_packet.no index of 14, we will increase the the index to 15 - and return with an error code immediately, even though one more fragment is due for transmission and allowed. Fixing this issue by moving the check before incrementing the index. While at it, adding an unlikely(), because the check is actually more of an assertion. Fixes: ee75ed88 ("batman-adv: Fragment and send skbs larger than mtu") Signed-off-by:
Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> [bwh: Backported to 3.16: don't return an error code] Signed-off-by:
-
Sven Eckelmann authored
commit 248e23b5 upstream. The function batadv_frag_skb_buffer was supposed not to consume the skbuff on errors. This was followed in the helper function batadv_frag_insert_packet when the skb would potentially be inserted in the fragment queue. But it could happen that the next helper function batadv_frag_merge_packets would try to merge the fragments and fail. This results in a kfree_skb of all the enqueued fragments (including the just inserted one). batadv_recv_frag_packet would detect the error in batadv_frag_skb_buffer and try to free the skb again. The behavior of batadv_frag_skb_buffer (and its helper batadv_frag_insert_packet) must therefore be changed to always consume the skbuff to have a common behavior and avoid the double kfree_skb. Fixes: 610bfc6b ("batman-adv: Receive fragmented packets and merge") Signed-off-by:
-
Christoph Hellwig authored
commit 783112f7 upstream. Both the NFS protocols and the Linux VFS use a setattr operation with a bitmap of attributes to set to set various file attributes including the file size and the uid/gid. The Linux syscalls never mix size updates with unrelated updates like the uid/gid, and some file systems like XFS and GFS2 rely on the fact that truncates don't update random other attributes, and many other file systems handle the case but do not update the other attributes in the same transaction. NFSD on the other hand passes the attributes it gets on the wire more or less directly through to the VFS, leading to updates the file systems don't expect. XFS at least has an assert on the allowed attributes, which caught an unusual NFS client setting the size and group at the same time. To handle this issue properly this splits the notify_change call in nfsd_setattr into two separate ones. Signed-off-by:
Christoph Hellwig <hch@lst.de> Tested-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Christoph Hellwig authored
commit 758e99fe upstream. Simplify exit paths, size_change use. Signed-off-by:
-
Christoph Hellwig authored
commit f0c63124 upstream. This fixes a failure in xfstests generic/313 because nfs doesn't update mtime on a truncate. The protocol requires this to be done implicity for a size changing setattr. Signed-off-by:
-
Chao Peng authored
commit 96794e4e upstream. Guest segment selector is 16 bit field and guest segment base is natural width field. Fix two incorrect invocations accordingly. Without this patch, build fails when aggressive inlining is used with ICC. Signed-off-by:
Chao Peng <chao.p.peng@linux.intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> [bwh: Backported to 3.16: drop change in kvm_flush_pml_buffers()] Signed-off-by:
-
Eric Dumazet authored
commit 3608b13c upstream. Since mlx4 NIC are used on PowerPC with 64K pages, we need to adapt MLX4_EN_ALLOC_PREFER_ORDER definition. Otherwise, a fragment sitting in an out of order TCP queue can hold 0.5 Mbytes and it is a serious OOM risk. Fixes: 51151a16 ("mlx4: allow order-0 memory allocations in RX path") Signed-off-by:
-
John Keeping authored
commit e84b4a84 upstream. Since commit 2d984ad1 (PM / QoS: Introcuce latency tolerance device PM QoS type) we reassign "c" to point at qos->latency_tolerance before freeing c->notifiers, but the notifiers field of latency_tolerance is never used. Restore the original behaviour of freeing the notifiers pointer on qos->resume_latency, which is used, and fix the following kmemleak warning. unreferenced object 0xed9dba00 (size 64): comm "kworker/0:1", pid 36, jiffies 4294670128 (age 15202.983s) hex dump (first 32 bytes): 00 00 00 00 04 ba 9d ed 04 ba 9d ed 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<c06f6084>] kmemleak_alloc+0x74/0xb8 [<c011c964>] kmem_cache_alloc_trace+0x170/0x25c [<c035f448>] dev_pm_qos_constraints_allocate+0x3c/0xe4 [<c035f574>] __dev_pm_qos_add_request+0x84/0x1a0 [<c035f6cc>] dev_pm_qos_add_request+0x3c/0x54 [<c03c3fc4>] usb_hub_create_port_device+0x110/0x2b8 [<c03b2a60>] hub_probe+0xadc/0xc80 [<c03bb050>] usb_probe_interface+0x1b4/0x260 [<c035773c>] driver_probe_device+0x198/0x40c [<c0357b14>] __device_attach_driver+0x8c/0x98 [<c0355bbc>] bus_for_each_drv+0x8c/0x9c [<c0357494>] __device_attach+0x98/0x138 [<c0357c64>] device_initial_probe+0x14/0x18 [<c03569dc>] bus_probe_device+0x30/0x88 [<c0354c54>] device_add+0x430/0x554 [<c03b92d8>] usb_set_configuration+0x660/0x6fc Fixes: 2d984ad1 (PM / QoS: Introcuce latency tolerance device PM QoS type) Signed-off-by:
John Keeping <john@metanate.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Peter Dunning authored
commit 9c568fd8 upstream. efx_start_all can return without initialising queues as a reset is pending. This means that when netif_device_attach is called, the kernel can start sending traffic without having an initialised TX queue to send to. This patch avoids this by not calling netif_device_attach if there is a pending reset. Fixes: e283546c ("sfc:On MCDI timeout, issue an FLR (and mark MCDI to fail-fast)") Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Mirko Parthey authored
commit bdfdaf1a upstream. The Asus WL-500W buttons are active high, but the software treats them as active low. Fix the inverted logic. Fixes: 3be97255 ("MIPS: BCM47XX: Import buttons database from OpenWrt") Signed-off-by:
Mirko Parthey <mirko.parthey@web.de> Acked-by:
Rafał Miłecki <rafal@milecki.pl> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15295/Signed-off-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
-
Arnd Bergmann authored
commit b6176494 upstream. One of the last remaining failures in kernelci.org is for a gcc bug: drivers/net/ethernet/qlogic/qlge/qlge_main.c:4819:1: error: insn does not satisfy its constraints: drivers/net/ethernet/qlogic/qlge/qlge_main.c:4819:1: internal compiler error: in extract_constrain_insn, at recog.c:2190 This is apparently broken in gcc-6 but fixed in gcc-7, and I cannot reproduce the problem here. However, it is clear that ip27_defconfig does not actually need this driver as the platform has only PCI-X but not PCIe, and the qlge adapter in turn is PCIe-only. The driver was originally enabled in 2010 along with lots of other drivers. Fixes: 59d302b3 ("MIPS: IP27: Make defconfig useful again.") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15197/Signed-off-by:
-
James Cowgill authored
commit 884b4269 upstream. If copy_from_user is called with a large buffer (>= 128 bytes) and the userspace buffer refers partially to unreadable memory, then it is possible for Octeon's copy_from_user to report the wrong number of bytes have been copied. In the case where the buffer size is an exact multiple of 128 and the fault occurs in the last 64 bytes, copy_from_user will report that all the bytes were copied successfully but leave some garbage in the destination buffer. The bug is in the main __copy_user_common loop in octeon-memcpy.S where in the middle of the loop, src and dst are incremented by 128 bytes. The l_exc_copy fault handler is used after this but that assumes that "src < THREAD_BUADDR($28)". This is not the case if src has already been incremented. Fix by adding an extra fault handler which rewinds the src and dst pointers 128 bytes before falling though to l_exc_copy. Thanks to the pwritev test from the strace test suite for originally highlighting this bug! Fixes: 5b3b1688 ("MIPS: Add Cavium OCTEON processor support ...") Signed-off-by:
James Cowgill <James.Cowgill@imgtec.com> Acked-by:
David Daney <david.daney@cavium.com> Reviewed-by:
-
Ralf Baechle authored
commit 66fd848c upstream. For certain arguments such as saddr = 0xc0a8fd60, daddr = 0xc0a8fda1, len = 80, proto = 17, sum = 0x7eae049d there will be a carry when folding the intermediate 64 bit checksum to 32 bit but the code doesn't add the carry back to the one's complement sum, thus an incorrect result will be generated. Reported-by:
Mark Zhang <bomb.zhang@gmail.com> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Reviewed-by:
-
Chris Brandt authored
commit f59de563 upstream. When there is no status bit, it is possible for the clock enable/disable operation to have not completed by the time the driver code resumes execution. This is due to the fact that write operations are sometimes queued and delayed internally. Doing a read ensures the write operations has completed. Fixes: b6face40 ("ARM: shmobile: r7s72100: add essential clock nodes to dtsi") Signed-off-by:
Chris Brandt <chris.brandt@renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> [bwh: Backported to 3.16: - Use barrier() instead of barrier_data() - Adjust filename] Signed-off-by:
-
Joe Thornber authored
commit ca763d0a upstream. A rounding bug due to compiler generated temporary being 32bit was found in remap_to_cache(). A localized cast in remap_to_cache() fixes the corruption but this preferred fix (changing from uint32_t to sector_t) eliminates potential for future rounding errors elsewhere. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Dmitry Tunin authored
commit 441ad62d upstream. T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3018 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by:
Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Thomas Gleixner authored
commit 6cf18e69 upstream. This interrupt handler is broken in several ways: - It loops forever when the op code is not decodeable - It never returns IRQ_HANDLED because the only way to exit the loop returns IRQ_NONE unconditionally. The whole concept of this is broken. Creating devices in an interrupt handler is beyond any point of sanity. Make it at least behave halfways sane so accidental users do not have to deal with a hard to debug lockup. Fixes: e809c22b ("goldfish: add the goldfish virtual bus") Reported-by:
Gabriel C <nix.or.die@gmail.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Thomas Gleixner authored
commit 47512cfd upstream. The goldfish platform code registers the platform device unconditionally which causes havoc in several ways if the goldfish_pdev_bus driver is enabled: - Access to the hardcoded physical memory region, which is either not available or contains stuff which is completely unrelated. - Prevents that the interrupt of the serial port can be requested - In case of a spurious interrupt it goes into a infinite loop in the interrupt handler of the pdev_bus driver (which needs to be fixed seperately). Add a 'goldfish' command line option to make the registration opt-in when the platform is compiled in. I'm seriously grumpy about this engineering trainwreck, which has seven SOBs from Intel developers for 50 lines of code. And none of them figured out that this is broken. Impressive fail! Fixes: ddd70cf9 ("goldfish: platform device for x86") Reported-by:
-
Christian Lamparter authored
commit c9f1e326 upstream. This patch fixes the OTP register definitions for the AR934x and AR9550 WMAC SoC. Previously, the ath9k driver was unable to initialize the integrated WMAC on an Aerohive AP121: | ath: phy0: timeout (1000 us) on reg 0x30018: 0xbadc0ffe & 0x00000007 != 0x00000004 | ath: phy0: timeout (1000 us) on reg 0x30018: 0xbadc0ffe & 0x00000007 != 0x00000004 | ath: phy0: Unable to initialize hardware; initialization status: -5 | ath9k ar934x_wmac: failed to initialize device | ath9k: probe of ar934x_wmac failed with error -5 It turns out that the AR9300_OTP_STATUS and AR9300_OTP_DATA definitions contain a typo. Cc: Gabor Juhos <juhosg@openwrt.org> Fixes: add295a4 "ath9k: use correct OTP register offsets for AR9550" Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
Chris Blake <chrisrblake93@gmail.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Ravi Bangoria authored
commit c21a493a upstream. Currently xmon data-breakpoint feature is broken. Whenever there is a watchpoint match occurs, hw_breakpoint_handler will be called by do_break via notifier chains mechanism. If watchpoint is registered by xmon, hw_breakpoint_handler won't find any associated perf_event and returns immediately with NOTIFY_STOP. Similarly, do_break also returns without notifying to xmon. Solve this by returning NOTIFY_DONE when hw_breakpoint_handler does not find any perf_event associated with matched watchpoint, rather than NOTIFY_STOP, which tells the core code to continue calling the other breakpoint handlers including the xmon one. Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Theodore Ts'o authored
commit 2ba3e6e8 upstream. It is OK for s_first_meta_bg to be equal to the number of block group descriptor blocks. (It rarely happens, but it shouldn't cause any problems.) https://bugzilla.kernel.org/show_bug.cgi?id=194567 Fixes: 3a4b77cdSigned-off-by:
Theodore Ts'o <tytso@mit.edu> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Leon Romanovsky authored
commit 12bbf1ea upstream. In case of unsupported singature, we returned positive value, while the better approach is to return -EINVAL. In addition, in this change, the error print is enriched to provide an actual supplied signature type. Fixes: e6631814 ("IB/mlx5: Support IB_WR_REG_SIG_MR") Cc: Sagi Grimberg <sagi@grimberg.me> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
-
Leon Romanovsky authored
commit 0fd27a88 upstream. When we initialize buffer to create SRQ in kernel, the number of pages was less than actually used in following mlx5_fill_page_array(). Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by:
Eli Cohen <eli@mellanox.com> Signed-off-by:
-
Trond Myklebust authored
commit 251af29c upstream. It is not sufficient to just check that the lock pids match when granting a callback, we also need to ensure that we're granting the callback on the right file. Reported-by:
Pankaj Singh <psingh.ait@gmail.com> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
NeilBrown authored
commit 9356863c upstream. Commit: cbd19983 ("md: Fix unfortunate interaction with evms") change mddev_put() so that it would not destroy an md device while ->ctime was non-zero. Unfortunately, we didn't make sure to clear ->ctime when unloading the module, so it is possible for an md device to remain after module unload. An attempt to open such a device will trigger an invalid memory reference in: get_gendisk -> kobj_lookup -> exact_lock -> get_disk when tring to access disk->fops, which was in the module that has been removed. So ensure we clear ->ctime in md_exit(), and explain how that is useful, as it isn't immediately obvious when looking at the code. Fixes: cbd19983 ("md: Fix unfortunate interaction with evms") Tested-by:
Guoqing Jiang <gqjiang@suse.com> Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
colyli@suse.de authored
commit 03a9e24e upstream. Recently I receive a bug report that on Linux v3.0 based kerenl, hot add disk to a md linear device causes kernel crash at linear_congested(). From the crash image analysis, I find in linear_congested(), mddev->raid_disks contains value N, but conf->disks[] only has N-1 pointers available. Then a NULL pointer deference crashes the kernel. There is a race between linear_add() and linear_congested(), RCU stuffs used in these two functions cannot avoid the race. Since Linuv v4.0 RCU code is replaced by introducing mddev_suspend(). After checking the upstream code, it seems linear_congested() is not called in generic_make_request() code patch, so mddev_suspend() cannot provent it from being called. The possible race still exists. Here I explain how the race still exists in current code. For a machine has many CPUs, on one CPU, linear_add() is called to add a hard disk to a md linear device; at the same time on other CPU, linear_congested() is called to detect whether this md linear device is congested before issuing an I/O request onto it. Now I use a possible code execution time sequence to demo how the possible race happens, seq linear_add() linear_congested() 0 conf=mddev->private 1 oldconf=mddev->private 2 mddev->raid_disks++ 3 for (i=0; i<mddev->raid_disks;i++) 4 bdev_get_queue(conf->disks[i].rdev->bdev) 5 mddev->private=newconf In linear_add() mddev->raid_disks is increased in time seq 2, and on another CPU in linear_congested() the for-loop iterates conf->disks[i] by the increased mddev->raid_disks in time seq 3,4. But conf with one more element (which is a pointer to struct dev_info type) to conf->disks[] is not updated yet, accessing its structure member in time seq 4 will cause a NULL pointer deference fault. To fix this race, there are 2 parts of modification in the patch, 1) Add 'int raid_disks' in struct linear_conf, as a copy of mddev->raid_disks. It is initialized in linear_conf(), always being consistent with pointers number of 'struct dev_info disks[]'. When iterating conf->disks[] in linear_congested(), use conf->raid_disks to replace mddev->raid_disks in the for-loop, then NULL pointer deference will not happen again. 2) RCU stuffs are back again, and use kfree_rcu() in linear_add() to free oldconf memory. Because oldconf may be referenced as mddev->private in linear_congested(), kfree_rcu() makes sure that its memory will not be released until no one uses it any more. Also some code comments are added in this patch, to make this modification to be easier understandable. This patch can be applied for kernels since v4.0 after commit: 3be260cc ("md/linear: remove rcu protections in favour of suspend/resume"). But this bug is reported on Linux v3.0 based kernel, for people who maintain kernels before Linux v4.0, they need to do some back back port to this patch. Changelog: - V3: add 'int raid_disks' in struct linear_conf, and use kfree_rcu() to replace rcu_call() in linear_add(). - v2: add RCU stuffs by suggestion from Shaohua and Neil. - v1: initial effort. Signed-off-by:
Coly Li <colyli@suse.de> Cc: Shaohua Li <shli@fb.com> Cc: Neil Brown <neilb@suse.com> Signed-off-by:
-
Ravikumar Kattekola authored
commit a53210f5 upstream. Fixes: a45c6cb8 ("[ARM] 5369/1: omap mmc: Add new omap hsmmc controller for 2430 and 34xx, v3") when using really large timeout (up to 4*60*1000 ms for bkops) there is a possibility of data overflow using unsigned int so use 64 bit unsigned long long. Signed-off-by:
Ravikumar Kattekola <rk@ti.com> Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> [bwh: Backported to 3.16: drop change in omap_hsmmc_prepare_data()] Signed-off-by:
-
