- 23 Jul, 2024 36 commits
-
-
Sven Schnelle authored
In preparation of having lowcore at different address than zero, add the base register to all lowcore accesses in system_call(). Reviewed-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Sven Schnelle <svens@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com>
-
Sven Schnelle authored
In preparation of having lowcore at different address than zero, add the base register to all lowcore accesses in ret_from_fork(). Reviewed-by:
-
Sven Schnelle authored
In preparation of having lowcore at different address than zero, add the base register to all lowcore accesses in __switch_to(). Reviewed-by:
-
Sven Schnelle authored
In preparation of having lowcore at different address than zero, add the base register to all lowcore accesses in restart_int_handler(). Reviewed-by:
-
Sven Schnelle authored
In preparation of having lowcore at different address than zero, add the base register to all lowcore accesses in mcck_int_handler(). Reviewed-by:
-
Sven Schnelle authored
In preparation of having lowcore at different address than zero, add the base register to all lowcore accesses in the ext/io interrupt handlers. Reviewed-by:
-
Sven Schnelle authored
In preparation of having lowcore at different address than zero, add the base register to all lowcore accesses in pgm_check_handler(). Reviewed-by:
-
Sven Schnelle authored
In preparation of having lowcore at different address than zero, add the base register to CHECK_VMAP_STACK and CHECK_STACK. No functional change, because %r0 is passed to the macro. Signed-off-by:
-
Sven Schnelle authored
In preparation of having lowcore at different address than zero, add the base register to SIEEXIT. No functional change, because %r0 is passed to the macro. Reviewed-by:
-
Sven Schnelle authored
In preparation of having lowcore at different address than zero, add the base register to MBEAR. No functional change, because %r0 is passed to the macro. Reviewed-by:
-
Sven Schnelle authored
In preparation of having lowcore at different address than zero, add the base register to all lowcore accesses in __sie64a(). Reviewed-by:
-
Sven Schnelle authored
In preparation of having lowcore at different address than zero, add the base register to all lowcore accesses in startup_continue(). Reviewed-by:
-
Sven Schnelle authored
The s390 architecture defines two special per-CPU data pages called the "prefix area". In s390-linux terminology this is usually called "lowcore". This memory area contains system configuration data like old/new PSW's for system call/interrupt/machine check handlers and lots of other data. It is normally mapped to logical address 0. This area can only be accessed when in supervisor mode. This means that kernel code can dereference NULL pointers, because accesses to address 0 are allowed. Parts of lowcore can be write protected, but read accesses and write accesses outside of the write protected areas are not caught. To remove this limitation for debugging and testing, remap lowcore to another address and define a function get_lowcore() which simply returns the address where lowcore is mapped at. This would normally introduce a pointer dereference (=memory read). As lowcore is used for several very often used variables, add code to patch this function during runtime, so we avoid the memory reads. For C code get_lowcore() has to be used, for assembly code it is the GET_LC macro. When using this macro/function a reference is added to alternative patching. All these locations will be patched to the actual lowcore location when the kernel is booted or a module is loaded. To make debugging/bisecting problems easier, this patch adds all the infrastructure but the lowcore address is still hardwired to 0. This way the code can be converted on a per function basis, and the functionality is enabled in a patch after all the functions have been converted. Note that this requires at least z16 because the old lpsw instruction only allowed a 12 bit displacement. z16 introduced lpswey which allows 20 bits (signed), so the lowcore can effectively be mapped from address 0 - 0x7e000. To use 0x7e000 as address, a 6 byte lgfi instruction would have to be used in the alternative. To save two bytes, llilh can be used, but this only allows to set bits 16-31 of the address. In order to use the llilh instruction, use 0x70000 as alternative lowcore address. This is still large enough to catch NULL pointer dereferences into large arrays. Reviewed-by:
-
Heiko Carstens authored
GCC may die with an ICE if the flag outputs constraint is used in combination with other inline assemblies. This will be fixed with GCC 14.2.0. Therefore disable the use of the constraint for now. Link: https://gcc.gnu.org/git?p=gcc.git;a=commit;h=cd11413ff7c4353a3e336db415304f788d23a393Signed-off-by:
-
Heiko Carstens authored
CIF_SIE indicates if a thread is running in SIE context. This is the state of a thread and not the CPU. Therefore move this indicator to thread info. Signed-off-by:
-
Heiko Carstens authored
The low level machine check handler code fills the ptregs structure partially with the register contents present at machine check handler entry and partially with contents from the machine check save area. In case of a machine check the contents of all general purpose registers are saved by the CPU to the machine check save area. Therefore simplify the code and fill the ptregs structure by only using the machine check save area as source. Signed-off-by:
-
Heiko Carstens authored
The alternative and the normal facility list are always identical. Remove the alternative facility list, which allows to simplify the alternatives code. Acked-by:
Alexander Gordeev <agordeev@linux.ibm.com> Tested-by:
-
Heiko Carstens authored
The nospec implementation is deeply integrated into the alternatives code: only for nospec an alternative facility list is implemented and used by the alternative code, while it is modified by nospec specific needs. Push down the nospec alternative handling into the nospec by introducing a new alternative type and a specific nospec callback to decide if alternatives should be applied. Also introduce a new global nobp variable which together with facility 82 can be used to decide if nobp is enabled or not. Acked-by:
-
Sven Schnelle authored
Add the required code to patch alternatives early in the decompressor. This is required for the upcoming lowcore relocation changes, where alternatives for facility 193 need to get patched before lowcore alternatives. Reviewed-by:
-
Heiko Carstens authored
Rework alternatives to allow for callbacks. With this every alternative entry has additional data encoded: - When (aka context) an alternative is supposed to be applied - The type of an alternative, which allows for type specific handling and callbacks - Extra type specific payload (patch information), which can be passed to callbacks in order to decide if an alternative should be applied or not With this only the "late" context is implemented, which means there is no change to the previous behaviour. All code is just converted to the more generic new infrastructure. Reviewed-by:
-
Heiko Carstens authored
To avoid lots of ifdefs in C code make s390_kernel_write() usable for the decompressor: simply use memcpy() for this case since there is no write protection enabled that early. Reviewed-by:
-
Heiko Carstens authored
Move all text sync functions from alternative.c to processor.c. This way there is only minimal code left in alternative.c left, which is a prerequisite to use the C file within boot code as well. Reviewed-by:
-
Heiko Carstens authored
The two alternative header files must stay in sync. This is easier to achieve within one header file. Therefore merge both of them and have only one file, like most other architectures. Reviewed-by:
-
Heiko Carstens authored
The alternative code is using the words facility and feature for the same. Rename facility to more generic feature everywhere to have consistent naming. Reviewed-by:
-
Sven Schnelle authored
The current Kernel doesn't boot without alternative patching on z16 machines. To avoid such bugs in the future, remove the option disable alternative patching. Signed-off-by:
-
Sven Schnelle authored
To allow testing flags for offline CPUs, move the CIF flags to struct pcpu. To avoid having to calculate the array index for each access, add a pointer to the pcpu member for the current cpu to lowcore. Reviewed-by:
-
Sven Schnelle authored
In preparation of moving the CIF flags from lowcore to pcpu_devices, convert the pcpu_devices array to use the percpu infrastructure. This is required because using the pcpu_devices array as it is would introduce a performance penalty due to the fact that CPU flags for multiple CPUs would end up in the same cacheline. Note that a pointer to the pcpu struct of the IPL CPU is still required. This is because a restart interrupt can be triggered on an offline CPU. s390 stores the percpu offset in lowcore, but offline CPUs have no lowcore area allocated. So percpu data cannot be used from an offline CPU and we need to get the pcpu pointer for the IPL cpu from somewhere else. Reviewed-by:
-
Sven Schnelle authored
The current smp code allows to trigger a restart interrupt on CPUs offline in linux. To allow using the percpu infrastructure instead of the pcpu_devices array, switch to the ipl cpu which is always online before calling do_restart(). Reviewed-by:
-
Alexander Gordeev authored
When allocating a random memory range for .amode31 sections the minimal randomization address is 0. That does not lead to a possible overlap with the decompressor image (which also starts from 0) since by that time the image range is already reserved. Do not assume the decompressor range is reserved and always provide the minimal randomization address for .amode31 sections beyond the decompressor. That is a prerequisite for moving the lowcore memory address from NULL elsewhere. Signed-off-by:
-
Thomas Richter authored
Event CF_DIAG reads out complete counter sets using stcctm instruction. This is done at event start time when the process starts execution and at event stop time when the process is removed from the CPU. During removal the difference of each counter in the counter sets is calculated and saved as raw data in the ring buffer. This works fine unless the number of counters in a counter set is zero. This may happen for the extended counter set. This set is machine specific and the size of the counter set can be zero even when extended counter set is authorized for read access. This case is not handled. cfdiag_diffctr() checks authorization of the extended counter set. If true the functions assumes the extended counter set has been saved in a data buffer. However this is not the case, cfdiag_getctrset() does not save a counter set with counter set size of zero. This mismatch causes an endless loop in the counter set readout during event stop handling. The calculation of the difference of the counters in each counter now verifies the size of the counter set is non-zero. A counter set with size zero is skipped. Fixes: a029a4ea ("s390/cpumf: Allow concurrent access for CPU Measurement Counter Facility") Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Acked-by:
Sumanth Korikkar <sumanthk@linux.ibm.com> Acked-by:
-
Ilya Leoshkevich authored
Add KMSAN vmalloc metadata areas to /sys/kernel/debug/kernel_page_tables. Example output: 0x000003a95fff9000-0x000003a960000000 28K PTE I ---[ vmalloc Area End ]--- ---[ Kmsan vmalloc Shadow Start ]--- 0x000003a960000000-0x000003a960010000 64K PTE RW NX [...] 0x000003d3dfff9000-0x000003d3e0000000 28K PTE I ---[ Kmsan vmalloc Shadow End ]--- ---[ Kmsan vmalloc Origins Start ]--- 0x000003d3e0000000-0x000003d3e0010000 64K PTE RW NX [...] 0x000003fe5fff9000-0x000003fe60000000 28K PTE I ---[ Kmsan vmalloc Origins End ]--- ---[ Kmsan Modules Shadow Start ]--- 0x000003fe60000000-0x000003fe60001000 4K PTE RW NX [...] 0x000003fe60100000-0x000003fee0000000 2047M PMD I ---[ Kmsan Modules Shadow End ]--- ---[ Kmsan Modules Origins Start ]--- 0x000003fee0000000-0x000003fee0001000 4K PTE RW NX [...] 0x000003fee0100000-0x000003ff60000000 2047M PMD I ---[ Kmsan Modules Origins End ]--- ---[ Modules Area Start ]--- 0x000003ff60000000-0x000003ff60001000 4K PTE RO X Signed-off-by:Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by:
-
Ilya Leoshkevich authored
Resolve the conflict between commit 2a48c8c9 ("s390/kmsan: implement the architecture-specific functions") and commit 39976f12 ("s390: Remove S390_lowcore"). Fixes: 2a48c8c9 ("s390/kmsan: implement the architecture-specific functions") Signed-off-by:
-
Vasily Gorbik authored
The struct vm_layout contains fields used in __pa/__va calculations. Such fundamental things have to be exported with EXPORT_SYMBOL to avoid breakages of out-of-tree modules under non-GPL licenses. Fixes: 7de0446f ("s390/boot: Make identity mapping base address explicit") Acked-by:
-
Gerd Bayer authored
On a PCI adapter that provides up to 8 MSI interrupt sources the s390 implementation of PCI interrupts rejected to accommodate them, although the underlying hardware is able to support that. For MSI-X it is sufficient to allocate a single irq_desc per msi_desc, but for MSI multiple irq descriptors are attached to and controlled by a single msi descriptor. Add the appropriate loops to maintain multiple irq descriptors and tie/untie them to/from the appropriate AIBV bit, if a device driver allocates more than 1 MSI interrupt. Common PCI code passes on requests to allocate a number of interrupt vectors based on the device drivers' demand and the PCI functions' capabilities. However, the root-complex of s390 systems support just a limited number of interrupt vectors per PCI function. Produce a kernel log message to inform about any architecture-specific capping that might be done. With this change, we had a PCI adapter successfully raising interrupts to its device driver via all 8 sources. Fixes: a384c892 ("s390/PCI: Fix single MSI only check") Signed-off-by:
Gerd Bayer <gbayer@linux.ibm.com> Reviewed-by:
Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by:
-
Gerd Bayer authored
Factor out adapter interrupt allocation from arch_setup_msi_irqs() in preparation for enabling registration of multiple MSIs. Code movement only, no change of functionality intended. Signed-off-by:
-
Heiko Carstens authored
Implement the runtime constant infrastructure for s390, allowing the dcache d_hash() function to be generated using as a constant for hash table address followed by shift by a constant of the hash index. This is the s390 variant of commit 94a2bc0f ("arm64: add 'runtime constant' support") and commit e3c92e81 ("runtime constants: add x86 architecture support"). Signed-off-by:
-
- 22 Jul, 2024 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull MSI interrupt updates from Thomas Gleixner: "Switch ARM/ARM64 over to the modern per device MSI domains. This simplifies the handling of platform MSI and wire to MSI controllers and removes about 500 lines of legacy code. Aside of that it paves the way for ARM/ARM64 to utilize the dynamic allocation of PCI/MSI interrupts and to support the upcoming non standard IMS (Interrupt Message Store) mechanism on PCIe devices" * tag 'irq-msi-2024-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) irqchip/gic-v3-its: Correctly fish out the DID for platform MSI irqchip/gic-v3-its: Correctly honor the RID remapping genirq/msi: Move msi_device_data to core genirq/msi: Remove platform MSI leftovers irqchip/irq-mvebu-icu: Remove platform MSI leftovers irqchip/irq-mvebu-sei: Switch to MSI parent irqchip/mvebu-odmi: Switch to parent MSI irqchip/mvebu-gicp: Switch to MSI parent irqchip/irq-mvebu-icu: Prepare for real per device MSI irqchip/imx-mu-msi: Switch to MSI parent irqchip/gic-v2m: Switch to device MSI irqchip/gic_v3_mbi: Switch over to parent domain genirq/msi: Remove platform_msi_create_device_domain() irqchip/mbigen: Remove platform_msi_create_device_domain() fallback irqchip/gic-v3-its: Switch platform MSI to MSI parent irqchip/irq-msi-lib: Prepare for DOMAIN_BUS_WIRED_TO_MSI irqchip/mbigen: Prepare for real per device MSI irqchip/irq-msi-lib: Prepare for DEVICE MSI to replace platform MSI irqchip/gic-v3-its: Provide MSI parent for PCI/MSI[-X] irqchip/irq-msi-lib: Prepare for PCI MSI/MSIX ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull interrupt subsystem updates from Thomas Gleixner: "Core: - Provide a new mechanism to create interrupt domains. The existing interfaces have already too many parameters and it's a pain to expand any of this for new required functionality. The new function takes a pointer to a data structure as argument. The data structure combines all existing parameters and allows for easy extension. The first extension for this is to handle the instantiation of generic interrupt chips at the core level and to allow drivers to provide extra init/exit callbacks. This is necessary to do the full interrupt chip initialization before the new domain is published, so that concurrent usage sites won't see a half initialized interrupt domain. Similar problems exist on teardown. This has turned out to be a real problem due to the deferred and parallel probing which was added in recent years. Handling this at the core level allows to remove quite some accrued boilerplate code in existing drivers and avoids horrible workarounds at the driver level. - The usual small improvements all over the place Drivers: - Add support for LAN966x OIC and RZ/Five SoC - Split the STM ExtI driver into a microcontroller and a SMP version to allow building the latter as a module for multi-platform kernels - Enable MSI support for Armada 370XP on platforms which do not support IPIs - The usual small fixes and enhancements all over the place" * tag 'irq-core-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits) irqdomain: Fix the kernel-doc and plug it into Documentation genirq: Set IRQF_COND_ONESHOT in request_irq() irqchip/imx-irqsteer: Handle runtime power management correctly irqchip/gic-v3: Pass #redistributor-regions to gic_of_setup_kvm_info() irqchip/bcm2835: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND irqchip/gic-v4: Make sure a VPE is locked when VMAPP is issued irqchip/gic-v4: Substitute vmovp_lock for a per-VM lock irqchip/gic-v4: Always configure affinity on VPE activation Revert "irqchip/dw-apb-ictl: Support building as module" Revert "Loongarch: Support loongarch avec" arm64: Kconfig: Allow build irq-stm32mp-exti driver as module ARM: stm32: Allow build irq-stm32mp-exti driver as module irqchip/stm32mp-exti: Allow building as module irqchip/stm32mp-exti: Rename internal symbols irqchip/stm32-exti: Split MCU and MPU code arm64: Kconfig: Select STM32MP_EXTI on STM32 platforms ARM: stm32: Use different EXTI driver on ARMv7m and ARMv7a irqchip/stm32-exti: Add CONFIG_STM32MP_EXTI irqchip/dw-apb-ictl: Support building as module irqchip/riscv-aplic: Simplify the initialization code ... -
Linus Torvalds authored
Merge tag 'loongarch-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Define __ARCH_WANT_NEW_STAT in unistd.h - Always enumerate MADT and setup logical-physical CPU mapping - Add irq_work support via self IPIs - Add RANDOMIZE_KSTACK_OFFSET support - Add ARCH_HAS_PTE_DEVMAP support - Add ARCH_HAS_DEBUG_VM_PGTABLE support - Add writecombine support for DMW-based ioremap() - Add architectural preparation for CPUFreq - Add ACPI standard hardware register based S3 support - Add support for relocating the kernel with RELR relocation - Some bug fixes and other small changes * tag 'loongarch-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: Make the users of larch_insn_gen_break() constant LoongArch: Check TIF_LOAD_WATCH to enable user space watchpoint LoongArch: Use rustc option -Zdirect-access-external-data LoongArch: Add support for relocating the kernel with RELR relocation LoongArch: Remove a redundant checking in relocator LoongArch: Use correct API to map cmdline in relocate_kernel() LoongArch: Automatically disable KASLR for hibernation LoongArch: Add ACPI standard hardware register based S3 support LoongArch: Add architectural preparation for CPUFreq LoongArch: Add writecombine support for DMW-based ioremap() LoongArch: Add ARCH_HAS_DEBUG_VM_PGTABLE support LoongArch: Add ARCH_HAS_PTE_DEVMAP support LoongArch: Add RANDOMIZE_KSTACK_OFFSET support LoongArch: Add irq_work support via self IPIs LoongArch: Always enumerate MADT and setup logical-physical CPU mapping LoongArch: Define __ARCH_WANT_NEW_STAT in unistd.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull thermal control fix from Rafael Wysocki: "Fix a flood of kernel messages coming from the thermal core on systems where iwlwifi is loaded, but the network interfaces controlled by it are down (Rafael Wysocki)" * tag 'thermal-6.11-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: core: Allow thermal zones to tell the core to ignore them
-
