- 22 Mar, 2021 19 commits
-
-
Ezequiel Garcia authored
Until now, the VP8 V4L2 API was not exported as a public API, and only defined in a private media header (media/vp8-ctrls.h). The reason for this was a concern about the API not complete and ready to support VP8 decoding hardware accelerators. After reviewing the VP8 specification in detail, and now that the API is able to support Cedrus and Hantro G1, we can consider this ready. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Ezequiel Garcia authored
Before we move the VP8 controls to a stable public header, rename this macro so it's clearly V4L2-specific. Signed-off-by:
-
Ezequiel Garcia authored
Simply print the type of the control. Signed-off-by:
-
Ezequiel Garcia authored
Move the VP8 stateless control types out of staging, and re-number it to avoid any confusion. Signed-off-by:
-
Ezequiel Garcia authored
Since we are ready to stabilize the VP8 stateless API, move the parsed VP8 pixel format. Signed-off-by:
-
Ezequiel Garcia authored
In preparation for making the interface public, document all the structures. Signed-off-by:
-
Ezequiel Garcia authored
Rename to struct v4l2_vp8_loop_filter, which is closer to the VP8 syntax. This change is only cosmetics, but since this API is exposed to userspace, it's worth the trouble to get it consistent. Signed-off-by:
-
Ezequiel Garcia authored
It doesn't seem to add any clarity to have a "header" suffix in controls, struct names and flags. Since this just makes names too long without any benefit, just drop it. Signed-off-by:
-
Stanimir Varbanov authored
On production devices the firmware could be located on different places, this path could be provided by special firmware-name DT property. Here we check for existence of such DT property and if it exist take the firmware path from there. Otherwise, if the property is missing we fallback to the predefined path from driver resource structure. Signed-off-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Stephen Boyd authored
This file uses memremap() now, so we should include io.h instead of relying on any sort of implicit include elsewhere. Cc: Dikshita Agarwal <dikshita@codeaurora.org> Fixes: 0ca0ca98 ("media: venus: core: add support to dump FW region") Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Fritz Koenig <frkoenig@chromium.org> Signed-off-by:
-
Bryan O'Donoghue authored
Commit aaaa93ed ("media] media: venus: venc: add video encoder files") is the last in a series of three commits to add core.c vdec.c and venc.c adding core, encoder and decoder. The encoder and decoder check for core drvdata as set and return -EPROBE_DEFER if it has not been set, however both the encoder and decoder rely on core.v4l2_dev as valid. core.v4l2_dev will not be valid until v4l2_device_register() has completed in core.c's probe(). Normally this is never seen however, Dmitry reported the following backtrace when compiling drivers and firmware directly into a kernel image. [ 5.259968] Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) [ 5.269850] sd 0:0:0:3: [sdd] Optimal transfer size 524288 bytes [ 5.275505] Workqueue: events deferred_probe_work_func [ 5.275513] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 5.441211] usb 2-1: new SuperSpeedPlus Gen 2 USB device number 2 using xhci-hcd [ 5.442486] pc : refcount_warn_saturate+0x140/0x148 [ 5.493756] hub 2-1:1.0: USB hub found [ 5.496266] lr : refcount_warn_saturate+0x140/0x148 [ 5.500982] hub 2-1:1.0: 4 ports detected [ 5.503440] sp : ffff80001067b730 [ 5.503442] x29: ffff80001067b730 [ 5.592660] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 5.598478] x28: ffff6c6bc1c379b8 [ 5.598480] x27: ffffa5c673852960 x26: ffffa5c673852000 [ 5.598484] x25: ffff6c6bc1c37800 x24: 0000000000000001 [ 5.810652] x23: 0000000000000000 x22: ffffa5c673bc7118 [ 5.813777] hub 1-1:1.0: USB hub found [ 5.816108] x21: ffffa5c674440000 x20: 0000000000000001 [ 5.820846] hub 1-1:1.0: 4 ports detected [ 5.825415] x19: ffffa5c6744f4000 x18: ffffffffffffffff [ 5.825418] x17: 0000000000000000 x16: 0000000000000000 [ 5.825421] x15: 00000a4810c193ba x14: 0000000000000000 [ 5.825424] x13: 00000000000002b8 x12: 000000000000f20a [ 5.825427] x11: 000000000000f20a x10: 0000000000000038 [ 5.845447] usb 2-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd [ 5.845904] [ 5.845905] x9 : 0000000000000000 x8 : ffff6c6d36fae780 [ 5.871208] x7 : ffff6c6d36faf240 x6 : 0000000000000000 [ 5.876664] x5 : 0000000000000004 x4 : 0000000000000085 [ 5.882121] x3 : 0000000000000119 x2 : ffffa5c6741ef478 [ 5.887578] x1 : 3acbb3926faf5f00 x0 : 0000000000000000 [ 5.893036] Call trace: [ 5.895551] refcount_warn_saturate+0x140/0x148 [ 5.900202] __video_register_device+0x64c/0xd10 [ 5.904944] venc_probe+0xc4/0x148 [ 5.908444] platform_probe+0x68/0xe0 [ 5.912210] really_probe+0x118/0x3e0 [ 5.915977] driver_probe_device+0x5c/0xc0 [ 5.920187] __device_attach_driver+0x98/0xb8 [ 5.924661] bus_for_each_drv+0x68/0xd0 [ 5.928604] __device_attach+0xec/0x148 [ 5.932547] device_initial_probe+0x14/0x20 [ 5.936845] bus_probe_device+0x9c/0xa8 [ 5.940788] device_add+0x3e8/0x7c8 [ 5.944376] of_device_add+0x4c/0x60 [ 5.948056] of_platform_device_create_pdata+0xbc/0x140 [ 5.953425] of_platform_bus_create+0x17c/0x3c0 [ 5.958078] of_platform_populate+0x80/0x110 [ 5.962463] venus_probe+0x2ec/0x4d8 [ 5.966143] platform_probe+0x68/0xe0 [ 5.969907] really_probe+0x118/0x3e0 [ 5.973674] driver_probe_device+0x5c/0xc0 [ 5.977882] __device_attach_driver+0x98/0xb8 [ 5.982356] bus_for_each_drv+0x68/0xd0 [ 5.986298] __device_attach+0xec/0x148 [ 5.990242] device_initial_probe+0x14/0x20 [ 5.994539] bus_probe_device+0x9c/0xa8 [ 5.998481] deferred_probe_work_func+0x74/0xb0 [ 6.003132] process_one_work+0x1e8/0x360 [ 6.007254] worker_thread+0x208/0x478 [ 6.011106] kthread+0x150/0x158 [ 6.014431] ret_from_fork+0x10/0x30 [ 6.018111] ---[ end trace f074246b1ecdb466 ]--- This patch fixes by - Only setting drvdata after v4l2_device_register() completes - Moving v4l2_device_register() so that suspend/reume in core::probe() stays as-is - Changes pm_ops->core_function() to take struct venus_core not struct device - Minimal rework of v4l2_device_*register in probe/remove Reported-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by:
-
Christophe JAILLET authored
If an error occurs after a successful 'of_icc_get()' call, it must be undone. Use 'devm_of_icc_get()' instead of 'of_icc_get()' to avoid the leak. Update the remove function accordingly and axe the now unneeded 'icc_put()' calls. Fixes: 32f0a6dd ("media: venus: Use on-chip interconnect API") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Stanimir Varbanov authored
Add support for Access Unit Delimiter control into encoder. Signed-off-by:
-
Stanimir Varbanov authored
Add a control to enable inserting of AUD NALU into encoded bitstream. Reviewed-by:
-
Stanimir Varbanov authored
Deprecate mfc private display delay and display enable controls for new clients and use the standard controls instead. Acked-by:
-
Stanimir Varbanov authored
Use the standard display_delay and display_delay_enable controls, the legacy private MFC controls are kept for backward compatibility. Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Stanimir Varbanov authored
Add support for display delay and display delay enable std controls. With this we implement decoder decode output order (decode vs display). Once firmware implement few new features the controls will be used for other use-cases. Signed-off-by:
-
Stanimir Varbanov authored
Make display delay and display delay enable MFC controls standard v4l controls. This will allow reuse of the controls for other decoder drivers. Also the new proposed controls are now codec agnostic because they could be used for any codec. Acked-by:
-
Mauro Carvalho Chehab authored
Document the basic policies of the media subsystem profile. Signed-off-by:
-
- 12 Mar, 2021 1 commit
-
-
Mauro Carvalho Chehab authored
In practice, IA_CSS_PIPE_ID_NUM should never be used when calling atomisp_q_video_buffers_to_css(), as the driver should discover the right pipe before calling it. Yet, if some pipe parsing issue happens, it could end using it. So, add a WARN_ON() to prevent such case. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 11 Mar, 2021 20 commits
-
-
Laurent Pinchart authored
Print the value of the ISP shadow registers in mipi_csis_dump_regs() as this can help debugging. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by:
-
Laurent Pinchart authored
Replace hardcoded register addresses in the MIPI_CSIS_DBG_CTRL() function with macros. While at it, update the printed name of the registers to match the datasheet, and short them by address. Signed-off-by:
-
Laurent Pinchart authored
Rename several register macros to match the names from the documentation. Signed-off-by:
-
Laurent Pinchart authored
Replace the per-channel ISP registers macros with a single one that take the channel as a parameter. Only channel 0 is supported for now, but this will make support for multiple channels easier. Signed-off-by:
-
Laurent Pinchart authored
Define macros for the fields of the MIPI_CSIS_DPHY_BCTRL_L register, based on the i.MX8MM datasheet. The numerical value written to the register, taken from the i.MX7D code, is unchanged, and corresponds to a 20.0MHz Tx escape clock frequency according to the documentation of the register from the i.MX8MM. Whether the other fields are applicable to the i.MX7D is unknown. While at it, rename the DPHY[BS]CTRL register names to DPHY_[BS]CTRL to match the datasheet. Signed-off-by:
-
Laurent Pinchart authored
When setting the CSIS parameters, write the MIPI_CSIS_DPHYCTRL register fully instead of modifying selected fields, as the register doesn't contain any reserved fields that need to be preserved. This simplifies initialization slightly, and ensures that the register value doesn't depend on its previous state (before a warm reboot for instance). Signed-off-by:
-
Laurent Pinchart authored
Make it easier to instrument register access (for instance with printk-based logging) by turning the macros into inline functions. Signed-off-by:
-
Laurent Pinchart authored
The Ths_settle timing parameter depends solely on the lane data rate of the source. Calculate it at runtime instead of requiring it to be specified in the device tree. Signed-off-by:
-
Laurent Pinchart authored
Checking if the link setup operation is called for the sink or source pad doesn't require any locking. Move it out of the section protected by the mutex. Signed-off-by:
-
Laurent Pinchart authored
The mipi_csis_set_hsync_settle() is small, called from a single place, and misnamed (HS stands for high speed, not horizontal sync). Inline it in its only caller, and refactor the HSSETTLE register field macros while at it. Signed-off-by:
-
Laurent Pinchart authored
CSI-2 uses, as a convention, 1Xn media bus formats. Replace MEDIA_BUS_FMT_UYVY8_2X8 with MEDIA_BUS_FMT_UYVY8_1X16, and set the width value accordingly. Signed-off-by:
-
Laurent Pinchart authored
The data type specified for 10-bit YUV is the same as 8-bit YUV. This is wrong, and has thus clearly not been tested. Instead of fixing data type without being able to test it, drop it. It can be added back later when someone will have access to a 10-bit YUV source to this it. Signed-off-by:
-
Laurent Pinchart authored
The wrap clock is retrieved with the other clocks using devm_clk_bulk_get(), and retrieved independently with a specific devm_clk_get() call. The latter isn't needed, replace it with usage of the wrap clock from the bulk array. As the wrap clock is mandatory, simplify its usage further by removing conditionals. Signed-off-by:
-
Laurent Pinchart authored
The .s_power() subdev operation is optional, don't error out when the source doesn't implement it. Signed-off-by:
-
Laurent Pinchart authored
The alignments given to the v4l_bound_align_image() are expressed in bytes, while the function expects them to be expressed as a power of two. Fix it. Signed-off-by:
-
Laurent Pinchart authored
The device has a single reset line, there's thus no need to name it explicitly when calling devm_reset_control_get_exclusive(). Drop the name in preparation for the removal of the reset-names property in the DT binding. Signed-off-by:
-
Laurent Pinchart authored
The CSI subdev has a single source, the input video mux. There's thus a single link between the source and the CSI, which can be made immutable and enabled to simplify configuration. Signed-off-by:
-
Laurent Pinchart authored
Add a flags argument to the v4l2_create_fwnode_links_to_pad() function to specify the link flags. This allows drivers to create immutable links for instance. Signed-off-by:
-
Laurent Pinchart authored
The CSI driver only supports the BGGR Bayer patterns currently. The hardware supports all patterns (the only pattern-dependent hardware operation is statistics calculation, as de-bayering isn't supported), enable them in the driver too. Signed-off-by:
-
Laurent Pinchart authored
The SOF and EOF interrupts are not used. Don't enable them. Signed-off-by:
-
