- 26 Apr, 2016 40 commits
-
-
Gal Pressman authored
Use ethtool -K <interface> rxvlan <on/off> to enable/disable C-TAG vlan stripping by hardware. Signed-off-by:
Gal Pressman <galp@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Gal Pressman authored
Add query MCIA, PMLP registers infrastructure and commands. Add ethtool support for get_module_info() and get_module_eeprom() callbacks. Signed-off-by:
-
Gal Pressman authored
Add the needed hardware command and mlx5_ifc structs for managing LED control. Add set_phys_id ethtool callback to support ethtool -p flag. Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by:
-
Eran Ben Elisha authored
Introduce new access register named Ports Check Mask Register (PCMR) to control all HW checks on port. With this register, the driver can enable/disable Hardware FCS validation. When RXALL is enabled/disabled using ndo_set_features, enable/disable fcs check at HW. User can change HW configuration using rx-all flag at ethtool. Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
-
Gal Pressman authored
In current mlx5e ndo_set_features implementation, setting some features can success while others can fail. Today, we return one error code which doesn't reflect the current features status of the netdev at the end of the ndo callback. Set netdev->features with features which were successfully set in order to keep the current status in case of failure. For this purpose, define new Macro to set/unset specific feature in netdev->features. This patch introduces a mechanism that uses feature handlers for each feature. Set features will call a generic handler, which will then call a specific handler in his turn and update netdev->features according to it's return value. Each specific handler is responsible to perform driver specific actions, and updating params if needed. Signed-off-by:
-
Gal Pressman authored
Expose link_down_events counter through ethtool -S. This counter is read from PPort statistics, then proccessed and stored as a special handling software counter. This counter is stored along software counters since it is the only PPort counter that it's size is not 64 bits. Signed-off-by:
-
Gal Pressman authored
Expose counters providing information for each priority level (PCP) through ethtool -S option and DCBNL. This includes rx/tx bytes, frames, and pause counters. Signed-off-by:
-
Gal Pressman authored
VPort and software counters names are confusing and may be unclear, all VPort counters now have a prefix of rx/tx_vport_*. Signed-off-by:
-
Gal Pressman authored
Redesign ethtool statistics handling and reporting in the driver: 1. Move counters to a separate file (en_stats.h). 2. Remove unnecessary dependencies between stats and strings. 3. Use counter descriptors which hold a name and offset for each counter, and will be used to decide which counters will be exposed. For example when adding a new software counter to ethtool, instead of: 1. Add to stats struct. 2. Add to strings struct in the same order. 3. Change macro defining number of software counters. The only thing needed is to link the new counter to a counter descriptor. VPort counters are a set of hardware traffic counters created automatically for each virtual port opened. PPort counters are a set of counters describing per physical port performance statistics. These counters are gathered from hardware register and divided to groups according to different protocols. Signed-off-by:
-
Gal Pressman authored
Provide rtnl_link_stats64 with information regarding physical errors to be seen in ifconfig and ip tool. Signed-off-by:
-
David S. Miller authored
Signed-off-by: -
David S. Miller authored
Florian Westphal says: ==================== net: core: remove TX_LOCKED support Not that many users left, lets kill it. TX_LOCKED was meant to be used by LLTX drivers when spin_trylock() failed. Stack then re-queued if collisions happened on different cpus or free'd the skb to prevent deadlocks. Most of the driver removal patches fall into one of three categories: 1. remove the driver-private tx lock (and LLTX flag), or... 2. convert spin_trylock to plain spin_lock, or... 3. convert TX_LOCKED to free+TX_OK Patches are grouped by these categories, last patch is the actual removal. All driver changes were compile tested only with exception of atl1e. ==================== Signed-off-by: -
Florian Westphal authored
No more users in the tree, remove NETDEV_TX_LOCKED support. Adds another hole in softnet_stats struct, but better than keeping the unused collision counter around. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Florian Westphal authored
replace the trylock by a full spin_lock and remove TX_LOCKED return value. Followup patch will remove TX_LOCKED from the kernel. Cc: Jon Mason <jdmason@kudzu.us> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
Florian Westphal authored
These drivers already call netif_stop_queue() so we should not be called unless tx space is available. Just free the skb and return TX_OK. Followup patch will remove NETDEV_TX_LOCKED from the kernel. Cc: linux-parisc@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: Thomas Sailer <t.sailer@alumni.ethz.ch> Signed-off-by:
-
Florian Westphal authored
similar to atl1c: lock is only used in ndo_start_xmit, but we also advertised LLTX, so remove that as well and let core stack handle tx locking. Allows to remove the TX_LOCKED return value from the driver. Cc: Jay Cliburn <jcliburn@gmail.com> Cc: Chris Snook <chris.snook@gmail.com> Signed-off-by:
-
Florian Westphal authored
AFAICS this is safe: the lock is only used in the .ndo_start_xmit function and this driver does not set LLTX. Gets rid of TX_LOCKED return value, followup patches will remove it. Cc: Jay Cliburn <jcliburn@gmail.com> Cc: Chris Snook <chris.snook@gmail.com> Signed-off-by:
-
Florian Westphal authored
ndo_start_xmit never returns it to stack, but nes_nic_send helper used it if skb could not be queued to hardware. Switch to bool instead. Cc: <linux-rdma@vger.kernel.org> Signed-off-by:
-
David S. Miller authored
Sergei Shtylyov says: ==================== Don't return NULL from get_phy_device() anymore Here's the set of 5 patches against DaveM's 'net-next.git' repo. The first patch makes get_phy_device() return only error values on error, the rest of the patches clean up the callers of that function... ==================== Signed-off-by: -
Sergei Shtylyov authored
Now that get_phy_device() no longer returns NULL on error, we don't need to check for it... Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Sergei Shtylyov authored
Now that get_phy_device() no longer returns NULL on error, we don't need to check for it... Signed-off-by:
-
Sergei Shtylyov authored
Now that get_phy_device() no longer returns NULL on error, we don't need to check for it... Signed-off-by:
-
Sergei Shtylyov authored
Now that get_phy_device() no longer returns NULL on error, we don't need to check for it... Signed-off-by:
-
Sergei Shtylyov authored
Arnd Bergmann asked that get_phy_device() returns either NULL or the error value, not both on error. Do as he said, return ERR_PTR(-ENODEV) instead of NULL when the PHY ID registers read as all ones. Suggested-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Sergei Shtylyov authored
sh_eth_dev_init() is now always called with 'true' as the 2nd argument, so that there's no more sense in having 2 parameters to this function... Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Xin Long authored
For sctp assoc, when rcvbuf_policy is set, it will has it's own rmem_alloc, when we dump asoc info in sctp_diag, we should use that value on RMEM_ALLOC as well, just like WMEM_ALLOC. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Francesco Ruggeri authored
macvtap_device_event(NETDEV_UNREGISTER) should check vlan->minor to determine if it is being invoked in the context of a macvtap_newlink that failed, for example in this code sequence: macvtap_newlink macvlan_common_newlink register_netdevice call_netdevice_notifiers(NETDEV_REGISTER, dev) macvtap_device_event(NETDEV_REGISTER) <fail here, vlan->minor = 0> rollback_registered(dev); rollback_registered_many call_netdevice_notifiers(NETDEV_UNREGISTER, dev); macvtap_device_event(NETDEV_UNREGISTER) <nothing to clean up here> Signed-off-by:Francesco Ruggeri <fruggeri@arista.com> Acked-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Francesco Ruggeri authored
If macvlan_common_newlink fails in register_netdevice after macvlan_init then it decrements port->count twice, first in macvlan_uninit (from register_netdevice or rollback_registered) and then again in macvlan_common_newlink. A similar problem may exist in the ipvlan driver. This patch consolidates modifications to port->count into macvlan_init and macvlan_uninit (thanks to Eric Biederman for suggesting this approach). v3: remove macvtap specific bits. Signed-off-by:
-
David S. Miller authored
Manish Chopra says: ==================== qed: Bandwidth configuration support This series adds support in driver for min/max bandwidth configuration for the PF on the link change notification or on explicit request of bandwidth update from the MFW [management firmware]. The same infrastructure would later be used by user based flows [for example, rate shaping for the VFs] Please consider applying this series to "net-next" ==================== Signed-off-by: -
Manish Chopra authored
This patch adds support for PF minimum bandwidth update or configuration notified by management firmware. Signed-off-by:
Manish Chopra <manish.chopra@qlogic.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
-
Manish Chopra authored
This patch adds support for PF maximum bandwidth update or configuration notified by management firmware. Signed-off-by:
-
Manish Chopra authored
This patch adds relevant APIs needed to configure WFQ (Weighted fair queueing) values for the vports. WFQ configuration is used per vport basis when minimum bandwidth update/configuration is notified to the PF by the management firmware. Signed-off-by:
-
David S. Miller authored
Hariprasad Shenai says: ==================== cxgb4: minor fixes, decode msgs and code refactor for few functions This patch series adds new routine to get adapter information and removes some redundant messages logged in dmesg. Fixes race while freeing tx descriptors. Decodes module type and link down reason codes obtained from firmware. Refactor port initialization and FW_PORT_CMD handling. Pass correct port id in DCB message handler to obtain netdev associated. This patch series has been created against net-next tree and includes patches on cxgb4 driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: -
Hariprasad Shenai authored
Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
The firmware can send a set of asynchronous replies through FW_PORT_CMD with DCBX information when that's negotiated with the Link Peer. The old code always assumed that a FW_PORT_CMD reply was always a Get Port Information message. This change conditionalizes the code to only handle the Get Port Information messages and throws a warning if we don't understand what we've been given. Also refactor t4_handle_fw_rpl() so that core functionality performed by t4_handle_get_port_info() for a specified port. Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
Hariprasad Shenai authored
Refactor t4_port_init() so that the core functionality is done by t4_init_portinfo() for a particular port. Also rename variables to sensible ones. Signed-off-by:
-
Hariprasad Shenai authored
Decode and log port module error, unknown modules and unsupported modules. Signed-off-by:
-
Hariprasad Shenai authored
There could be race between t4_eth_xmit() and t4_free_sge_resources() while freeing tx descriptors, take txq lock in t4_free_sge_resources(). We need to stop the xmit frame path which runs in bottom half context while unloading the driver using _bh variant of the lock. This is to prevent the deadlock between xmit and driver unload. Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
