The hash files were using a naming convention which was inconsistent
(ssi vs. cc), included a useless prefix (ssi_hash) and often used too
long function names producing monster such as
ssi_ahash_get_initial_digest_len_sram_addr() that made the call site
hard to read.

Make the code more readable by switching to a simpler, consistent naming
convention for the file.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove a no longer needed abstraction around ccree hash crypto API
internals that used to allow same ops to be used in synchronous and
asynchronous fashion.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lu_global_init() does not check result of register_shrinker()
which was tagged __must_check recently, reported by sparse.
Patch also fixes missed cleanup of resources allocated prior to
register_shrinker() invocation and not freed after any failure.
Signed-off-by: Aliaksei Karaliou <akaraliou.dev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ldlm_pools_init() does not check result of register_shrinker()
which was tagged __must_check recently, reported by sparse.
Signed-off-by: Aliaksei Karaliou <akaraliou.dev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sptlrpc_enc_pool_init() does not check result of register_shrinker()
which was tagged __must_check recently, reported by sparse.
Signed-off-by: Aliaksei Karaliou <akaraliou.dev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

osc_init() does not check result of register_shrinker()
which was tagged __must_check recently, reported by sparse.
Signed-off-by: Aliaksei Karaliou <akaraliou.dev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro isn't used, and comment is about some earlier version
of the lustre code that never reached the mainline kernel.
Just discard it.
Signed-off-by: NeilBrown <neilb@suse.com>
Acked-by: Luis de Bethencourt <luisbg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This appears to be intended for assertions that only make
sense in the kernel, but as this code is now kernel-only,
it doesn't make sense any more.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is unused.
drivers/staging/lustre/lnet/lnet/nidstrings.c does use the name,
but it includes its own local definition.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is only used for tracing when some strings might
be NULL.  NULL strings are not a problem for tracing,
vnsprintf() will report them as "(null)" which is probably
better (easier to parse) than an empty string.

Also remove a nearby comment that doesn't relate to the
(remaining) code at all.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These are all unused except cfs_size_round().
So discard the others, and use the kernel-standard round_up()
function to implement cfs_size_round().
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1/ Use kvmalloc() instead of kmalloc or vmalloc
2/ Discard the _GFP() interfaces that are never used.
  We only ever do GFP_NOFS and GFP_ATOMIC allocations,
  so support each of those explicitly.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Using the *_entry macro simplifies the code slightly.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Having a stand-alone "list_entry()" call is often a sign
that something like "list_for_each_entry()" would
make the code clearer.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Small clarify improvements, and one local variable avoided.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is only a small simplification, but it makes the code
a little clearer.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Using list_for_each_entry() means we don't need 'tmp'.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Using list_empty() and list_last_entry() makes the code clearer,
and allows a local variable to be discarded.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the visorbus driver out of staging (drivers/staging/unisys/visorbus)
and to drivers/visorbus. Modify the configuration and makefiles so they
now reference the new location. The s-Par header file visorbus.h that is
referenced by all s-Par drivers, is being moved into include/linux.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Checking of modulation in rf69_set_modulation_shaping is done by
if-else and since else part covers OOK and UNDEF values it possible to
set modulation shaping for undefined modulation type.
To fix this validation should be done by switch clause and in case of
undefined modulation error returned.
Signed-off-by: Marcin Ciupak <marcin.s.ciupak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It is possible that rf69_get_modulation() function will return
'undefined' value and this value is missing in enum modulation. Fix this
by adding appropriate entry in enum modulation.
Signed-off-by: Marcin Ciupak <marcin.s.ciupak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

    Removes following warnings found by checkpatch.pl script:
    WARNING: line over 80 characters
Signed-off-by: Rodrigo Zaiden <rodrigoffzz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The call to set_flow_mode() was supposed to be on the next line.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch warning: "spaces preferred around that '&'".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some comments, like "without memcpy would be nice", are removed.
Other comments are just translated to english.
rf69.c is now plain ASCII.
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Aligning the Tx buffers at 64B is a performance optimization
recommendation, not a hard requirement.

Make optional the alignment of Tx FD buffers, without enforcing
a reallocation in case there is not enough headroom for it.

On Rx, we keep allocating buffers with enough headroom to allow
Tx alignment of forwarded frames.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For non-linear skbs we build scatter-gather frames and allocate
a new buffer for the S/G table in which we reserve the required
headroom, so the actual skb headroom size doesn't matter.

Rather than use a one-size-fits-all approach, decide when to
enforce headroom requirements on a frame by frame basis.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For Tx confirmed frames that have an error indication in the frame
descriptor, we look at the Frame Annotation Status field (in the
buffer headroom) for details on the root cause and then print
a debug message with that information.

While useful in initial development stages, it doesn't bring
enough added value to justify reserving 64B of headroom for all
Tx frames (FAS is only 8B long, but we must reserve chunks of 64B
from the hardware annotation area).

If we remove the need for FAS field from egress frames, we can
renounce hardware annotation completely, since FAS is the only
HWA field we currently use.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a counter for the number of egress frames that need to be
realloc'ed due to insufficient headroom space.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 4b2d9fe8 ("staging: fsl-dpaa2/eth: Extra headroom in RX
buffers") tried to avoid the performance penalty of doing skb
reallocations in the network stack for IP forwarded frames between
two DPAA2 Ethernet interfaces. This led to a (too) complicated
formula that relies on the stack's internal implementation.

Instead, it's safer and easier to just not request any guarantee
from the stack. We already double check in the driver the required
headroom size of egress frames and realloc the skb if needed, so
we don't need to add any extra code.

On forwarding between two of our own interfaces, there is no
functional change; for traffic forwarded from a different device or
generated on the core, skb realloc operations are moved from the stack
to our driver, with no visible impact on performance.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 4b2d9fe8 ("staging: fsl-dpaa2/eth: Extra headroom in RX
buffers") removes the software annotation (SWA) area from the RX
buffer layout, as it's not used by anyone, but fails to update the
macros for accessing hardware annotation (HWA) fields, which is
right after the SWA in the buffer headroom.

This may lead to some frame annotation status fields (e.g. indication
if L3/L4 checksum is valid) to be read incorrectly.

Turn the accessor macros into inline functions and add a bool param
to specify if SWA is present or not.

Fixes: 4b2d9fe8 ("staging: fsl-dpaa2/eth: Extra headroom in RX buffers")
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The macro calls its argument -a function- twice, makes the calling
function return prematurely -skipping resource cleanup code- and hurts
understandability.
Signed-off-by: Nguyen Phan Quang Minh <minhnpq16@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added spaces around '+'. Warning found using checkpatch.pl
Signed-off-by: Akash Kumar <bholuakku@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no need to use 'else' if in main branch 'return' is present.
Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no need to use 'else' if in main branch 'goto' is present.
Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If an "if" branch is terminated by a "goto", there's no need to have an
"else" statement and an indented block of code.

Remove the "else" statement to simplify the code flow.
Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SET_CHECKED returns from the function on failure and in pi433_probe it is
necessary to free the GPIOs and the device on failure.
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The enum is now only used for ioctl, so move it pi433_if.h.
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replaces the functions rf69_set_amplifier_1, _2, _3 with two
functions: rf69_enable_amplifier(dev, amp_mask) and
rf69_disable_amplifier(dev, amp_mask).
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Call rf69_set_data_mode with DATAMODUL_MODE value directly.
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>