- 09 Oct, 2015 21 commits
-
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: net/dcb/Kconfig:config DCB net/dcb/Kconfig: bool "Data Center Bridging support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We can change to one of the other priority initcalls (subsys?) at any later date, if desired. We also delete the MODULE_LICENSE tag etc. since all that information is (or is now) already contained at the top of the file in the comments. Cc: "David S. Miller" <davem@davemloft.net> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Anish Bhatt <anish@chelsio.com> Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Shani Michaeli <shanim@mellanox.com> Cc: netdev@vger.kernel.org Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paul Gortmaker authored
The Makefile currently controlling compilation of this code lists it under "obj-y" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We can change to one of the other priority initcalls (subsys?) at any later date, if desired. We can't remove module.h since the file uses other module related stuff even though it is not modular itself. We move the information from the MODULE_LICENSE tag to the top of the file, since that information is not captured anywhere else. The MODULE_ALIAS_NET_PF_PROTO becomes a no-op in the non modular case, so it is removed. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Craig Gallek <kraig@google.com> Cc: netdev@vger.kernel.org Signed-off-by:
-
David S. Miller authored
Yaowei Bai says: ==================== net: small improvement This patchset makes several functions in net return bool to improve readability and/or simplicity because these functions only use one or zero as their return value. No functional changes. ==================== Signed-off-by: -
Yaowei Bai authored
This patch makes lockdep_rtnl_is_held return bool due to this particular function only using either one or zero as its return value. In another patch lockdep_is_held is also made return bool. No functional change. Signed-off-by:
Yaowei Bai <bywxiaobai@163.com> Signed-off-by:
-
Yaowei Bai authored
This patch makes bad_mask return bool due to this particular function only using either one or zero as its return value. No functional change. Signed-off-by:
-
Yaowei Bai authored
This patch makes inet_ifa_match return bool due to this particular function only using either one or zero as its return value. No functional change. Signed-off-by:
-
Yaowei Bai authored
This patch makes dccp_bad_service_code return bool due to these particular functions only using either one or zero as their return value. dccp_list_has_service is also been made return bool in this patchset. No functional change. Signed-off-by:
-
Yaowei Bai authored
This patch makes dccp_list_has_service return bool due to this particular function only using either one or zero as its return value. No functional change. Signed-off-by:
-
Yaowei Bai authored
This patch makes can_dropped_invalid_skb return bool due to this particular function only using either one or zero as its return value. No functional change. Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Yaowei Bai authored
This patch makes lockdep_nfnl_is_held return bool to improve readability due to this particular function only using either one or zero as its return value. No functional change. Signed-off-by:
-
Yaowei Bai authored
This patch makes ieee80211_is_* return bool to improve readability due to these particular functions only using either one or zero as their return value. No functional change. Signed-off-by:
-
Yaowei Bai authored
This patch makes lockdep_genl_is_held return bool to improve readability due to this particular function only using either one or zero as its return value. No functional change. Signed-off-by:
-
David S. Miller authored
Or Gerlitz says: ============================== Mellanox driver update for net-next Some small fixes and small enhancements from the team. Series applies over net-next commit acb4a6bf "tcp: ensure prior synack rtx behavior with small backlogs". ============================== Signed-off-by:
-
Saeed Mahameed authored
The 'for' loop when undoing rb-tree insertions and list-adds in the error flow in add_res_range had errors, fix them. Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Jack Morgenstein authored
The procedure mlx4_update_qp leaks mailboxes in its error-flow, fix that. Signed-off-by:
-
Ido Shamay authored
Changed the receive control flow in a way that steering rules are added only when the RSS object is already in RTR/RTS mode. Some optimization features, which are enabled by the device firmware, require this condition in order to be effective. Signed-off-by:
Ido Shamay <idos@mellanox.com> Signed-off-by:
-
Eli Cohen authored
Use a single threaded work queue for each device in the system instead of using one thread for any device. This is required so we can concurrently process system error handling for all the devices that need that. Signed-off-by:
Eli Cohen <eli@mellanox.com> Signed-off-by:
-
Eli Cohen authored
Use ioread function to read health buffer data. In addition, print the firmware version as a string for readability and also use dev_err to have the device string to be printed. Signed-off-by:
-
Eli Cohen authored
In preparation to handling system errors at the mlx5_core level, change the interface of cmd_work_handler to accept a 64 bit argument for the vector. This allows to encode a flag that signifies when the handler is called as a result of a driver logic that wishes to terminate commands that the hardware may not be able to terminate. Such command completions are detected at the handler and proper return status is encoded. To be able to terminate page handler commands, we make sure to set the corresponding bit in the bitmask. Signed-off-by:
-
Eli Cohen authored
Improve the messages printed by the mlx5 macros to include the device string. In addition, prefix names used by the macros with two underscores to avoid possible name collisions. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-10-08 This series contains updates to i40e and i40evf only (again). Jesse fixes an issue where the driver was issuing a WARN_ON during ring size changes because the code was cloning the rx_ring struct but not zeroing out the pointers before allocating new memory, so simply zero out the pointers. Also reduced the function call overhead by moving the interrupt enable function by moving it to the header file, which it in turn allows us to inline it. Also does a thorough job of code cleanup to fix spaces after declarations, remove unnecessary braces and breaks, remove another __func__ use and general code tidiness. Mitch adds mover verbose error messages when the number of supported VFs is reported in driver init and it different from the number reported in config space. Updated the VF driver to now detect a reset with the VF_ARQLEN register since the enable bit is cleared when the VF is reset and it stays cleared until the VF driver processes the reset and re-enables the admin queue which is more reliable than using the VFGEN_RSTAT as previously. Neerav adds parsing for CEE DCBx TLVs from the LLDP MIB since there is a need to get the CEE DesiredCfg Tx by firmware and DCB configuration Rx from peer for debug and other application purposes. Carolyn fixes a problem where the PF's Flow Director filter table would have an entry that the hardware was unable to add, when this occurs an invalid entry gets replayed and a valid one is lost. Matt fixes an issue where multiple link up messages can be logged resulting from admin queue link status timing when link properties are changed. Shannon adds the ability to control the period link polling through ethtool to be able to switch it off and on for debugging link issues. Serey explicitly assigns the enum index for each VSI type so that the PF and VF always reference to the same VSI type event if the enum lists are different. ==================== Signed-off-by:
-
- 08 Oct, 2015 19 commits
-
-
Jesse Brandeburg authored
To help users and developers know what compile options and hardware features are enabled at compile time, print VxLAN is available. Change-ID: I3162f3b7678dc725a597f964217920eb218b480b Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mitch Williams authored
The VF really doesn't care about the QOS handle but it will in the future. Since the VF only uses TC0, send it that handle. On the VF side, save the handle and use it to populate the QOS params when we call into the client interface. Change-ID: I76f41b070baeaa09b19383e9168bc677837e0761 Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
Mitch Williams authored
Use the capabilities passed to us by the PF driver to control VF driver behavior. In the process, clean up the VLAN add/remove code so it's not a horrible morass of ifdefs. Change-ID: I1050eaf12b658a26fea6813047c9964163c70a73 Signed-off-by:
-
Jesse Brandeburg authored
I found a code indent that was avoidable because a whole function is inside an if block, reverse the if and move the code back a tab. Change-ID: I9989c8750ee61678fbf96a3b0fd7bf7cc7ef300a Signed-off-by:
-
Jesse Brandeburg authored
Add missings spaces after declarations, remove another __func__ use, remove uncessary braces, remove unneeded breaks, and useless returns, and generally fix up some code. Change-ID: Ie715d6b64976c50e1c21531685fe0a2bd38c4244 Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Tested-by:
-
Mitch Williams authored
Using VFGEN_RSTAT to detect a VF reset is an endeavor that is fraught with peril. It's entirely too easy to miss a reset because none of the bits are sticky. By the time the VF driver reads the register, the reset may have been processed and cleaned up by the PF driver, leaving the register in the same state that it was before the reset. Instead, detect a reset with the VF_ARQLEN register. When the VF is reset, the enable bit in this register is cleared, and it stays cleared until the VF driver processes the reset and re-enables the admin queue. Because we now deal with multiple registers in the reset and watchdog tasks, rename the rstat_val variable to reg_val. Change-ID: Id1df17045c0992e607da0162d31807f7fc20d199 Signed-off-by:
-
Greg Bowers authored
Changes parsing of AQ command Get CEE DCBX OPER CFG (0x0A07). Change is required because FW creates the oper_prio_tc nibbles reversed from those in the CEE Priority Group sub-TLV. Change-ID: I7d9d8641bb430d30e286fc3fac909866ef8a0de8 Signed-off-by:
Greg Bowers <gregory.j.bowers@intel.com> Tested-by:
-
Serey Kong authored
Ran into an issue where PF's VSI type list was different from VF's, which was resulted in different enum index. The VSI type list can be different depending on what build flag is used for PF and VF. The change is to explicitly assign enum index for each VSI type so that PF and VF always reference to the same VSI type event if the enum lists are different. Change-ID: I8c0e5fdb515f324f7964df863a458073cf467e57 Signed-off-by:
Serey Kong <serey.kong@intel.com> Tested-by:
-
Shannon Nelson authored
There's been some need for controlling the periodic link polling for debugging link issues. This patch enables switching it off and on through an ethtool private flag. The link poll remains on by default, but can be turned off with ethtool --set-priv-flags p261p1 LinkPolling off and later turned back on with ethtool --set-priv-flags p261p1 LinkPolling on To check the current status, use ethtool --show-priv-flags p261p1 Change-ID: I32e4ab654ff3eec90a06cf144899971b82d71c40 Signed-off-by:
-
Matt Jared authored
This patch addresses an issue where multiple link up messages can be logged resulting from aq link status timing when link properties are changed (fc, speed, etc.); solved by using a single function to handle status printing and adding a mechanism to track whether link state (up or down) has actually changed. Change-ID: Ied6ed6e49dc397c77d992adc0bc9ed3767152b9d Signed-off-by:
Matt Jared <matthew.a.jared@intel.com> Tested-by:
-
Carolyn Wyborny authored
This patch fixes a problem where the PF's fdir filter table would have an entry that the hw was unable to add. This notification happens in the hot path, so instead of trying to fix it then, we note the location in the failure case and delete it during regular fdir subtask callback. Without this patch, a case can occur where an invalid entry gets replayed and a valid one is not. Change-ID: I67831c183b5d0309876de807cc434809b74c9cb7 Signed-off-by:
Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by:
-
Neerav Parikh authored
This patch adds capability to query and store the CEE DCBX DesiredCfg and RemoteCfg data from the LLDP MIB. Added new member "desired_dcbx_config" in the i40e_hw data structure to hold CEE only DesiredCfg data. Change-ID: I19c550369594384eaff4cc63e690ca740231195d Signed-off-by:
Neerav Parikh <neerav.parikh@intel.com> Tested-by:
-
Neerav Parikh authored
This patch adds parsing for CEE DCBX TLVs from the LLDP MIB. While the driver gets the DCB CEE operational configuration from Firmware using the "Get CEE DCBX Oper Config" AQ command there is a need to get the CEE DesiredCfg Tx by firmware and DCB configuration Rx from peer; for debug and other application purposes. Change-ID: I9140edf1a25a2852c7eff805d81e5eff6266178d Signed-off-by:
-
Mitch Williams authored
Under certain circumstances, the device may not have enough resources to enable all of the VFs that it advertises in config space. Although the number of supported VFs is reported upon driver init, it is not obvious when this is different from the number reported in config space. To eliminate this confusion, add an error message explaining the problem. Additionally, move the 'Allocating VFs' message down below the error checks so as to prevent further confusion. Change-ID: I45b7efca53a7aebf7777be33a8bc9d615ae48ea1 Signed-off-by:
-
Jesse Brandeburg authored
The interrupt enable function can be inlined by moving it to the header file, which decreases the function call overhead for a frequently called function. Change-ID: I3214cc99593725768642680e7b8ce7e9bba7e44d Signed-off-by:
-
Jesse Brandeburg authored
The driver was issuing a WARN_ON during ring size changes because the code was cloning the rx_ring struct but not zeroing out the pointers before allocating new memory. Zero out the pointers in the cloned copy before allocating new memory for them. In this case the code was correctly avoiding memory leaks but still triggering the warning. Change-ID: I186dd493948e9b7254ab0593d4aad8b68808918d Signed-off-by:
-
David S. Miller authored
Daniel Borkmann says: ==================== BPF/random32 updates BPF update to split the prandom state apart, and to move the *once helpers to the core. For details, please see individual patches. Given the changes and since it's in the tree for quite some time, net-next is a better choice in our opinion. v1 -> v2: - Make DO_ONCE() type-safe, remove the kvec helper. Credits go to Alexei Starovoitov for the __VA_ARGS__ hint, thanks! - Add a comment to the DO_ONCE() helper as suggested by Alexei. - Rework prandom_init_once() helper to the new API. - Keep Alexei's Acked-by on the last patch. ==================== Signed-off-by: -
Daniel Borkmann authored
While recently arguing on a seccomp discussion that raw prandom_u32() access shouldn't be exposed to unpriviledged user space, I forgot the fact that SKF_AD_RANDOM extension actually already does it for some time in cBPF via commit 4cd3675e ("filter: added BPF random opcode"). Since prandom_u32() is being used in a lot of critical networking code, lets be more conservative and split their states. Furthermore, consolidate eBPF and cBPF prandom handlers to use the new internal PRNG. For eBPF, bpf_get_prandom_u32() was only accessible for priviledged users, but should that change one day, we also don't want to leak raw sequences through things like eBPF maps. One thought was also to have own per bpf_prog states, but due to ABI reasons this is not easily possible, i.e. the program code currently cannot access bpf_prog itself, and copying the rnd_state to/from the stack scratch space whenever a program uses the prng seems not really worth the trouble and seems too hacky. If needed, taus113 could in such cases be implemented within eBPF using a map entry to keep the state space, or get_random_bytes() could become a second helper in cases where performance would not be critical. Both sides can trigger a one-time late init via prandom_init_once() on the shared state. Performance-wise, there should even be a tiny gain as bpf_user_rnd_u32() saves one function call. The PRNG needs to live inside the BPF core since kernels could have a NET-less config as well. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Cc: Chema Gonzalez <chema@google.com> Signed-off-by:
-
Daniel Borkmann authored
Add a prandom_init_once() facility that works on the rnd_state, so that users that are keeping their own state independent from prandom_u32() can initialize their taus113 per cpu states. The motivation here is similar to net_get_random_once(): initialize the state as late as possible in the hope that enough entropy has been collected for the seeding. prandom_init_once() makes use of the recently introduced prandom_seed_full_state() helper and is generic enough so that it could also be used on fast-paths due to the DO_ONCE(). Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
