- 21 Jul, 2011 40 commits
-
-
Giuseppe CAVALLARO authored
Prior to this change, most PHY configuration parameters were passed into the STMMAC device as a separate PHY device. As well as being unusual, this made it difficult to make changes to the MAC/PHY relationship. This patch moves all the PHY parameters into the MAC configuration structure, mainly as a separate structure. This allows us to completely ignore the MDIO bus attached to a stmmac if desired, and not create the PHY bus. It also allows the stmmac driver to use a different PHY from the one it is connected to, for example a fixed PHY or bit banging PHY. Also derive the stmmac/PHY connection type (MII/RMII etc) from the mode can be passed into <platf>_configure_ethernet. STLinux kernel at git://git.stlinux.com/stm/linux-sh4-2.6.32.y.git provides several examples how to use this new infrastructure (that actually is easier to maintain and clearer). Signed-off-by:
Stuart Menefy <stuart.menefy@st.com> Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Giuseppe CAVALLARO authored
The patch removes the following serie of warnings when the driver is compiled as built-in: drivers/net/stmmac/stmmac_main.c: In function stmmac_cmdline_opt: drivers/net/stmmac/stmmac_main.c:1855:12: warning: ignoring return value of kstrtoul, declared with attribute warn_unused_result [snip] Signed-off-by:
-
Giuseppe CAVALLARO authored
Signed-off-by:
-
Ben Hutchings authored
Some drivers (ab)use the ethtool_ops::get_regs operation to expose only a hardware revision ID. Commit a77f5db3 ('ethtool: Allocate register dump buffer with vmalloc()') had the side-effect of breaking these, as vmalloc() returns a null pointer for size=0 whereas kmalloc() did not. For backward-compatibility, allow zero-length dumps again. Reported-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Cc: stable@kernel.org [2.6.37+] Signed-off-by:
-
Dan Carpenter authored
There are two problems: 1) "n" was allocated with alloc_skb() so we should free it with kfree_skb() instead of regular kfree(). 2) We return the freed pointer instead of NULL. Signed-off-by:
Dan Carpenter <error27@gmail.com> Reviewed-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Jiri Pirko authored
there are no users outside vlan code Signed-off-by:
Jiri Pirko <jpirko@redhat.com> Signed-off-by:
-
Jiri Pirko authored
has no users so remove it Signed-off-by:
-
Jiri Pirko authored
ndo_vlan_rx_register is no longer in use in any driver so remove it. Signed-off-by:
-
Jiri Pirko authored
Now when all devices are cleaned up, bond can be cleaned up as well - remove bond->vlgrp - remove bond_vlan_rx_register - substitute necessary occurences of vlan_group_get_device Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
Jiri Pirko authored
- kill priv->vlgrp and stmmac_vlan_rx_register (used for nothing :)) Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill card->vlangrp and qeth_l3_vlan_rx_register Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill vdev->vlgrp and vxge_vlan_rx_register Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill adapter->vlgrp and igb_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill np->vlangrp and nv_vlan_rx_register - allow to turn on/off rx vlan accel via ethtool (set_features) Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill adapter->vlgrp and e1000_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill pi->vlan_grp and vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill adapter->vlgrp and atl2_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill adapter->vlgrp and atlx_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill dev->vlgrp and ns83820_vlan_rx_register Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill np->vlgrp and netdev_vlan_rx_register Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill vptr->vlgrp and velocity_vlan_rx_register Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill ap->vlgrp and ace_vlan_rx_register - enable vlan hw accel always (kill vlan ifdefs) Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill adapter->vlgrp and ixgbevf_vlan_rx_register Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill priv->vlgrp and bdx_vlan_rx_register Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill sp->vlgrp and s2io_vlan_rx_register and s2io_vlan_rx_kill_vid (which does nothing and is never called :)) Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan path - kill qdev->vlgrp and qlge_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan path - kill priv->vlgrp and mlx4_en_vlan_rx_register Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill jme->vlgrp and jme_vlan_rx_register Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill adapter->vlgrp and igbvf_vlan_rx_register Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill priv->vlgrp and gfar_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill enic->vlan_group and enic_vlan_rx_register Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill pi->vlan_grp and cxgb4vf_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill adapter->vlan_grp and t1_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by:
-
