- 31 Mar, 2017 3 commits
-
-
Sinclair Yeh authored
Universal support is prerequisite for atomic mode set. Explicitly create planes for the cursor and the primary FB. With a functional cursor plane, the DRM will no longer use the legacy cursor_set2 and cursor_move entry points. Signed-off-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
-
Sinclair Yeh authored
This field is not being used anymore Signed-off-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
New stuff for 4.12: - Preliminary vega10 support - Support for multi-level page tables - GPU sensor stuff for mesa - job tracing improvements - PRT support for sparse buffers - Additional SR-IOV improvements - ttm improvements - misc bug fixes and code cleanups * 'drm-next-4.12' of git://people.freedesktop.org/~agd5f/linux: (315 commits) drm/amdgpu: Fix 32bit x86 compilation warning drm/amdgpu: just disallow reading untouched registers drm/amdgpu: remove duplicate allowed reg CP_CPF_BUSY_STAT drm/amdgpu/soc15: enable psp block for SRIOV drm/amdgpu/soc15: bypass pp block for vf drm/amdgpu/psp: add check sOS sign drm/amd/amdgpu: Correct ring wptr address in debugfs (v2) drm/amdgpu: Fix multi-level page table bugs for large BOs v3 drm/amdgpu: Fix Vega10 VM initialization drm/amdgpu: Make max_pfn 64-bit drm/amdgpu: drop GB_GPU_ID from the golden settings drm/amdgpu: fix vm pte pde flags to 64-bit for sdma (v3) drm/amd/amdgpu: fix Tonga S3 resume hang on rhel6.8 drm/ttm: decrease ttm bo priority number drm/amd/amdgpu: fix performance drop when VRAM pressure drm/amdgpu: Couple small warning fixes drm/amdgpu: Clean up GFX 9 VM fault messages drm/amdgpu: Register UTCL2 as a source of VM faults drm/amdgpu/soc15: drop support for reading some registers drm/amdgpu/soc15: return cached values for some registers (v2) ...
-
- 30 Mar, 2017 37 commits
-
-
Alex Xie authored
drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c:187:2: warning: right shift count >= width of type [enabled by default] drivers/gpu/drm/amd/amdgpu/gfxhub_v1_0.c:173:2: warning: right shift count >= width of type [enabled by default] drivers/gpu/drm/amd/amdgpu/vega10_ih.c:106:3: warning: right shift count >= width of type [enabled by default] v2: Add a space between "&" and "0xff" Reported by: kbuild-all@01.org Signed-off-by:
Alex Xie <AlexBin.Xie@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Christian König authored
Not sure what the original intention was here, but returning a random piece of kernel memory to userspace because we didn't set the value at all is clearly not a good idea. This patch disallows reading the register and returns a proper error code instead. Signed-off-by:
Tom St Denis <tom.stdenis@amd.com> Signed-off-by:
-
Christian König authored
Remove duplicate mmCP_CPF_BUSY_STAT from the allowed registers. Signed-off-by:
-
Xiangliang Yu authored
SRIOV can support for loading ucode with PSP block, enable it. Signed-off-by:
Xiangliang Yu <Xiangliang.Yu@amd.com> Acked-by:
Huang Rui <ray.huang@amd.com> Acked-by:
-
Xiangliang Yu authored
Disable pp block if device is vf. Signed-off-by:
Monk Liu <Monk.Liu@amd.com> Acked-by:
-
Xiangliang Yu authored
Confirm if sys driver and sOS are already been loaded through sOS sign register, skip loading sys driver and sOS if finding the sign. Signed-off-by:
-
Tom St Denis authored
On gfx9 hardware the value is not wrapped and is a 64-bit value. So we reduce it modulo the ring size. Signed-off-by:
-
Felix Kuehling authored
Fix the start/end address calculation for address ranges that span multiple page directories in amdgpu_vm_alloc_levels. Add error messages if page tables aren't found. Otherwise the page table update would just fail silently. v2: * Change WARN_ON to WARN_ON_ONCE * Move masking of high address bits to caller * Add range-check for "from" and "to" v3: * Replace WARN_ON_ONCE in get_pt with pr_err in caller Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
-
Felix Kuehling authored
adev->family is not initialized yet when amdgpu_get_block_size is called. Use adev->asic_type instead. Minimum VM size is 512GB, not 256GB, for a single page table entry in the root page table. gmc_v9_0_vm_init is called after adev->vm_manager.max_pfn is initialized. Move the minimum VM-size enforcement ahead of max_pfn initializtion. Cast to 64-bit before the left-shift. Signed-off-by:
Chunming Zhou <david1.zhou@amd.com> Reviewed-by:
Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by:
-
Felix Kuehling authored
With 4-level page tables the maximum VM size is 256TB. That's 64G pages, which can't be represented in 32-bit. Signed-off-by:
-
Christian König authored
That register is marked deprecated, reading it results in a bus error. Signed-off-by:
-
Junwei Zhang authored
v2: fix for all sdma engines v3: squash in fix for SI/CI Signed-off-by:
-
Jim Qu authored
1. security firmware loading has moved to sw init, so this code is useless. 2. it seems that driver could not call request_firmware on kernel 2.6, when S3 resume. for request firmware depends on userspace, at this time, userspace is freeze. Signed-off-by:
Jim Qu <Jim.Qu@amd.com> Acked-by:
-
Roger.He authored
decrease and also reserve priority number for KFD using Signed-off-by:
Roger.He <Hongbo.He@amd.com> Reviewed-by:
-
Roger.He authored
When VRAM pressue and trigger huge evictions there is performance drop, this patch fix it. Signed-off-by:
-
Harry Wentland authored
Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Reviewed-by:
-
Felix Kuehling authored
Clean up the VM fault message format and use rate-limiting similar to other ASICs. Signed-off-by:
-
Felix Kuehling authored
Signed-off-by:
-
Alex Deucher authored
The RB harvest registers are not necessary, the driver already exposes this info via the info ioctl. GB_BACKEND_MAP has been deprecated since SI and is not relevant to the RB mapping. Reviewed-by:
-
Alex Deucher authored
Required for SR-IOV and saves MMIO transactions. v2: drop cached RB harvest registers Reviewed-by:
-
Alex Deucher authored
Match what we do for other asics. Reviewed-by:
-
Alex Deucher authored
We check the mem config register to make sure it's been programmed by the vbios to determine if we need to post so we check for a non-0 value. However, when the asic comes out of reset, we may see all ones here, so check for that too. Reviewed-by:
-
Andrey Grodzovsky authored
This used by DAL ISR logic for VBLANK handling. Signed-off-by:
Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Reviewed-by:
-
Monk Liu authored
1) Adapt to vulkan: Now use double SWITCH BUFFER to replace the 128 nops w/a, because when vulkan introduced, umd can insert 7 ~ 16 IBs per submit which makes 256 DW size cannot hold the whole DMAframe (if we still insert those 128 nops), CP team suggests use double SWITCH_BUFFERs, instead of tricky 128 NOPs w/a. 2) To fix the CE VM fault issue when MCBP introduced: Need one more COND_EXEC wrapping IB part (original one us for VM switch part). this change can fix vm fault issue caused by below scenario without this change: >CE passed original COND_EXEC (no MCBP issued this moment), proceed as normal. >DE catch up to this COND_EXEC, but this time MCBP issued, thus DE treats all following packages as NOP. The following VM switch packages now looks just as NOP to DE, so DE dosen't do VM flush at all. >Now CE proceeds to the first IBc, and triggers VM fault, because DE didn't do VM flush for this DMAframe. 3) change estimated alloc size for gfx9. with new DMAframe scheme, we need modify emit_frame_size for gfx9 4) No need to insert 128 nops after gfx8 vm flush anymore because there was double SWITCH_BUFFER append to vm flush, and for gfx7 we already use double SWITCH_BUFFER following after vm_flush so no change needed for it. 5) Change emit_frame_size for gfx8 v2: squash in BUG removal from Monk Signed-off-by:
-
Monk Liu authored
those MC_VM registers won't be programed by VBIOS in VF so driver is responsible to programe them. Signed-off-by:
-
Monk Liu authored
ring_write_multiple should use buf_mask instead of ptr_mask Signed-off-by:
-
Monk Liu authored
for SRIOV we cannot use access register when in IRQ routine with regular KIQ method Signed-off-by:
-
Monk Liu authored
no CG for SRIOV on SOC15 Signed-off-by:
-
Monk Liu authored
no hw_fini for SRIOV, otherwise other VF will be affected no CG for SRIOV Signed-off-by:
-
Monk Liu authored
must set minor_update.enable before write smaller value to wptr/doorbell, so for sriov we need set that register bit in hw_init period. this could fix the SDMA ring test fail after guest reboot Signed-off-by:
-
Monk Liu authored
ring->buf_mask need be set prior to ring_clear_ring invoke and fix ring_clear_ring as well which should use buf_mask instead of ptr_mask Signed-off-by:
-
Monk Liu authored
this must be invoked during early init Signed-off-by:
-
Monk Liu authored
when MCBP supported, we will set pre_enb bit for those IBs with PREEMPT flag tagged Signed-off-by:
-
Monk Liu authored
Preamble in linux doesn't mean it is CE PREAMBLE IB, instead it means this IB could be dropped if no ctx switch happens. Signed-off-by:
-
Monk Liu authored
Apply the new IB during IB emit for SRIOV with MCBP v2: agd: use define instead of magic number Signed-off-by:
-
Monk Liu authored
set bit 21 of IB.control filed to actually enable MCBP for SRIOV v2: add flag for preemption enable bit for soc15 and use this flag instead of hardcode. Signed-off-by:
-
Monk Liu authored
when MCBP enabled for gfx8, the cond_exec must also be implemented, otherwise there will be odds to meet cross engine (ce and me) deadlock when world switch happens. Signed-off-by:
-
