- 22 Apr, 2014 29 commits
-
-
Stephen Warren authored
When an attempt is made to configure an unsupported option on a pin, print the DT property name of that option, so it's easier to debug what the problem is. Signed-off-by:
Stephen Warren <swarren@nvidia.com> Acked-by:
Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Stephen Warren authored
The range of npins and function ID values is small enough to fit into a u8. Use this type rather than unsigned to shrink the pinmux data tables. Signed-off-by:
-
Stephen Warren authored
The fsafe value in the pingroup data tables is only used to implement tegra_pinctrl_disable(). The only reason this function is called is when dynamically switching between pinmux states, i.e. when disabling the old state before programming the new state. It's simpler to have the new target state define the expected value of each pin (and all current DTs do that). This also gives more flexibility, since it allows individual boards explicit control over the "inactive" mux function for each pin, rather than requiring it to be an SoC-specific value. Assuming this, we can get rid of the fsafe value from the driver completely, thus saving some more space in the driver tables. While re-writing the content of tegra124_pingroups[], fix the indentation to use a TAB instead of spaces. Signed-off-by:
-
Stephen Warren authored
Any SoC which supports the einput, odrain, lock, ioreset, or rcv_sel options has the relevant HW register fields in the same register as the mux function selection. Similarly, the drvtype option is always in the drive register, if it is supported at all. Hence, we don't need to have struct *_reg fields in the pin group table to define which register and bank to use for those options. Delete this to save space in the driver's data tables. However, many of those options are not supported on all SoCs, or not supported on some pingroups. We need a way to detect when they are supported. Previously, this was indicated by setting the struct *_reg field to -1. With the struct *_reg fields removed, we use the struct *_bit fields for this purpose instead. The struct *_bit fields need to be expanded from 5 to 6 bits in order to store a value outside the valid HW bit range of 0..31. Even without removing the struct *_reg fields, we still need to add code to validate the struct *_bit fields, since some struct *_bit fields were already being set to -1, without an option-specific struct *_reg field to "guard" them. In other words, before this change, the pinmux driver might allow some unsupported options to be written to HW. Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
Wolfram Sang <wsa@sang-engineering.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Wolfram Sang authored
Add the muxing for the last missing i2c rcar core. Fix the sorting for SH_PFC_PIN_NAMED while we are here. Signed-off-by:
-
Fabio Estevam authored
With debug enabled we get better readability dumps of the mux_mode register if we use hexadecimal format instead: imx6sl-pinctrl 20e0000.iomuxc: MX6SL_PAD_FEC_REF_CLK: 0x10 0x0001b0a8 Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Acked-by:
Shawn Guo <shawn.guo@freescale.com> Signed-off-by:
-
Kuninori Morimoto authored
Reviewed-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
-
Kuninori Morimoto authored
Reviewed-by:
-
Antoine Ténart authored
According to the MODULE_AUTHOR() comments, the author name should be "Name <email>" or just "Name". Add the missing '>'. Signed-off-by: Antoine TÃ
© nart <antoine.tenart@free-electrons.com> Acked-by:Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Antoine Ténart authored
When using a group only pinctrl driver, which does not have any information on the pins it is useless to define a get_group_pins always returning an empty list of pins. When not using get_group_pin[1], a driver must implement it so pins = NULL and num_pins = 0. This patch makes it the default behaviour if not defined in the pinctrl driver when used in pinmux enable and disable funtions and in pinctrl_groups_show. It also adds a check in pinctrl_get_group_pins and return -EINVAL if not defined. This function is called in the gpiolib when adding when pingroup range. It cannot be used if no group is defined, so this seams reasonable. [1] get_group_pin(struct pinctrl_dev *pctldev, unsigned selector, const unsigned **pins, unsigned *num_pins); Signed-off-by: Antoine TÃ
© nart <antoine.tenart@free-electrons.com> Signed-off-by: -
Boris BREZILLON authored
The A31 SoC has PL and PM banks and thus increase the default ARCH_NR_GPIO. Signed-off-by:
Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by:
-
Boris BREZILLON authored
The A31 SoC define a reset line for the R_PIO block which needs to be deasserted. Try to retrieve a reset control and deassert if one was found. Signed-off-by:
-
Boris BREZILLON authored
The A31 SoC provides both PL and PM pio bank through the R_PIO block. These pins all support gpio function and can bbe assigned to system peripherals (like TWI, P2WI, JTAG, ...) Signed-off-by:
-
Boris BREZILLON authored
Add support for multiple pin controller instances. First remove the static definition of the sunxi gpio chip struct and fill the dynamically struct instead. Then define a new pin_base field in the sunxi_pinctrl_desc which will be used to specify the gpiochip base pin. Signed-off-by:
-
Boris BREZILLON authored
Define PL and PM pin macros. Signed-off-by:
-
Boris BREZILLON authored
Disable the clk when failing to probe the pin controller device. Signed-off-by:
-
Boris BREZILLON authored
Check the clk_prepare_enable return value to avoid false positive probe. Signed-off-by:
-
Maxime COQUELIN authored
This patch completes the one that used ARRAY_SIZE for STiH407 and STiH416 for setting ninput_delays and noutput_delays fields. Signed-off-by:
Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by:
-
Maxime COQUELIN authored
This patch adds const qualifier where applicable. Reported-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Axel Lin authored
Define __PINCTRL_LANTIQ_H to prevent multiple inclusion. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
-
Axel Lin authored
It's only referenced in this file, make it static. Signed-off-by:
-
Laurent Pinchart authored
The DU parallel interface ODDF signal is optional, move it out of the HSYNC/VSYNC group into a group of its down. The CDE and DISP signals are independent, split them to two different groups. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Uwe Kleine-König authored
This driver is only useful on MSM8x74, so let the driver depend on ARCH_QCOM but allow compile coverage testing. The main benefit is that the driver isn't available to be selected for machines that don't have the matching hardware. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Bjorn Andersson authored
This adds pinctrl definitions for the GPIO pins of the TLMM v2 block in the Qualcomm APQ8064 platform. Signed-off-by:
Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by:
-
Bjorn Andersson authored
DT bindingdocumentation for qcom,apq8064-pinctrl driver. Signed-off-by:
-
Bjorn Andersson authored
The various pins may have different number of functions defined, so make this number definable per pin instead of just increasing it to the largest one for all of the platforms. Signed-off-by:
-
Linus Walleij authored
This lets the gpiolib core handle the irqchip set-up and chained IRQ on the primary (behind the mux) IRQ chip in the st pinctrl driver. Default irq type is set to level low at irqchip add time. The v1 was sent by Linus (https://lkml.org/lkml/2014/4/4/287). Two changes were necessary to make it to work properly on STiH416: 1 - dev reference was not passed to the gpio_chip struct, causing a panic. 2 - gpiochip_irqchip_add passed IRQ_TYPE_NONE as default type, which caused lot of warnings at init time. I choose IRQ_TYPE_LEVEL_LOW as default. Cc: Srinivas Kandagatla <srinivas.kandagatla@gmail.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
-
Linus Walleij authored
In the mass-conversion to the new irqchip callbacks, this in-transit IRQ support was missed. Fix it. Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com> Cc: Maxime COQUELIN <maxime.coquelin@st.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
-
- 20 Apr, 2014 5 commits
-
-
Linus Torvalds authored
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull slave-dmaengine fixes from Vinod Koul: "Back from long weekend here in India and now the time to send fixes for slave dmaengine. - Dan's fix of sirf xlate code - Jean's fix for timberland - edma fixes by Sekhar for SG handling and Yuan for changing init call" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: fix eDMA driver as a subsys_initcall dmaengine: sirf: off by one in of_dma_sirfsoc_xlate() platform: Fix timberdale dependencies dma: edma: fix incorrect SG list handling -
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull iommu fixes from Joerg Roedel: "Fixes for regressions: - fix wrong IOMMU enumeration causing some SCSI device drivers initialization failures - ARM-SMMU fixes for a panic condition and a wrong return value" * tag 'iommu-fixes-v3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/arm-smmu: fix panic in arm_smmu_alloc_init_pte iommu/arm-smmu: Return 0 on unmap failure iommu/vt-d: fix bug in matching PCI devices with DRHD/RMRR descriptors iommu/vt-d: Fix get_domain_for_dev() handling of upstream PCIe bridges iommu/vt-d: fix memory leakage caused by commit ea8ea460 -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf tooling fixes from Ingo Molnar: "Three small tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Improve error reporting perf tools: Adjust symbols in VDSO perf kvm: Fix 'Min time' counting in report command
-
Ingo Molnar authored
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/urgent Pull perf/urgent fixes from Jiri Olsa: User visible changes: * Adjust symbols in VDSO to properly resolve its function names (Vladimir Nikulichev) * Improve error reporting for record session failure (Adrien BAK) * Fix 'Min time' counting in report command (Alexander Yarygin) Signed-off-by:
Jiri Olsa <jolsa@redhat.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
- 19 Apr, 2014 6 commits
-
-
Adrien BAK authored
In the current version, when using perf record, if something goes wrong in tools/perf/builtin-record.c:375 session = perf_session__new(file, false, NULL); The error message: "Not enough memory for reading per file header" is issued. This error message seems to be outdated and is not very helpful. This patch proposes to replace this error message by "Perf session creation failed" I believe this issue has been brought to lkml: https://lkml.org/lkml/2014/2/24/458 although this patch only tackles a (small) part of the issue. Additionnaly, this patch improves error reporting in tools/perf/util/data.c open_file_write. Currently, if the call to open fails, the user is unaware of it. This patch logs the error, before returning the error code to the caller. Reported-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Adrien BAK <adrien.bak@metascale.org> Link: http://lkml.kernel.org/r/1397786443.3093.4.camel@beast [ Reorganize the changelog into paragraphs ] [ Added empty line after fd declaration in open_file_write ] Signed-off-by:
-
Vladimir Nikulichev authored
pert-report doesn't resolve function names in VDSO: $ perf report --stdio -g flat,0.0,15,callee --sort pid ... 8.76% 0x7fff6b1fe861 __gettimeofday ACE_OS::gettimeofday() ... In this case symbol values should be adjusted the same way as for executables, relocatable objects and prelinked libraries. After fix: $ perf report --stdio -g flat,0.0,15,callee --sort pid ... 8.76% __vdso_gettimeofday __gettimeofday ACE_OS::gettimeofday() Signed-off-by:Vladimir Nikulichev <nvs@tbricks.com> Tested-by:
Namhyung Kim <namhyung@kernel.org> Reviewed-by:
Adrian Hunter <adrian.hunter@intel.com> Link: http://lkml.kernel.org/r/969812.163009436-sendEmail@nvsSigned-off-by:
-
Alexander Yarygin authored
Every event in the perf-kvm has a 'stats' structure, which contains max/min/average/etc times of handling this event. The problem is that the 'perf-kvm stat report' command always shows that 'min time' is 0us for every event. Example: # perf kvm stat report Analyze events for all VCPUs: VM-EXIT Samples Samples% Time% Min Time Max Time Avg time [..] 0xB2 MSCH 12 0.07% 0.00% 0us 8us 7.31us ( +- 2.11% ) 0xB2 CHSC 12 0.07% 0.00% 0us 18us 9.39us ( +- 9.49% ) 0xB2 STPX 8 0.05% 0.00% 0us 2us 1.88us ( +- 7.18% ) 0xB2 STSI 7 0.04% 0.00% 0us 44us 16.49us ( +- 38.20% ) [..] This happens because the 'stats' structure is not initialized and stats->min equals to 0. Lets initialize the structure for every event after its allocation using init_stats() function. This initializes stats->min to -1 and makes 'Min time' statistics counting work: # perf kvm stat report Analyze events for all VCPUs: VM-EXIT Samples Samples% Time% Min Time Max Time Avg time [..] 0xB2 MSCH 12 0.07% 0.00% 6us 8us 7.31us ( +- 2.11% ) 0xB2 CHSC 12 0.07% 0.00% 7us 18us 9.39us ( +- 9.49% ) 0xB2 STPX 8 0.05% 0.00% 1us 2us 1.88us ( +- 7.18% ) 0xB2 STSI 7 0.04% 0.00% 1us 44us 16.49us ( +- 38.20% ) [..] Signed-off-by:Alexander Yarygin <yarygin@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/1397053319-2130-3-git-send-email-borntraeger@de.ibm.com [ Fixing the perf examples changelog output ] Signed-off-by:
-
Eric Dumazet authored
A va_list needs to be copied in case it needs to be used twice. Thanks to Hugh for debugging this issue, leading to various panics. Tested: lpq84:~# echo "|/foobar12345 %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h" >/proc/sys/kernel/core_pattern 'produce_core' is simply : main() { *(int *)0 = 1;} lpq84:~# ./produce_core Segmentation fault (core dumped) lpq84:~# dmesg | tail -1 [ 614.352947] Core dump to |/foobar12345 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 (null) pipe failed Notice the last argument was replaced by a NULL (we were lucky enough to not crash, but do not try this on your production machine !) After fix : lpq83:~# echo "|/foobar12345 %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h" >/proc/sys/kernel/core_pattern lpq83:~# ./produce_core Segmentation fault lpq83:~# dmesg | tail -1 [ 740.800441] Core dump to |/foobar12345 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 pipe failed Fixes: 5fe9d8ca ("coredump: cn_vprintf() has no reason to call vsnprintf() twice") Signed-off-by:Eric Dumazet <edumazet@google.com> Diagnosed-by:
Hugh Dickins <hughd@google.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org # 3.11+ Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Ingo Molnar: "This fixes the preemption-count imbalance crash reported by Owen Kibel" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Fix CMCI preemption bugs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Two fixes: - a SCHED_DEADLINE task selection fix - a sched/numa related lockdep splat fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Check for stop task appearance when balancing happens sched/numa: Fix task_numa_free() lockdep splat
-
