- 07 Sep, 2018 8 commits
-
-
Yonghong Song authored
This patch added a few netlink attribute parsing functions and the netlink API functions to query networking links, tc classes, tc qdiscs and tc filters. For example, the following API is to get networking links: int nl_get_link(int sock, unsigned int nl_pid, dump_nlmsg_t dump_link_nlmsg, void *cookie); Note that when the API is called, the user also provided a callback function with the following signature: int (*dump_nlmsg_t)(void *cookie, void *msg, struct nlattr **tb); The "cookie" is the parameter the user passed to the API and will be available for the callback function. The "msg" is the information about the result, e.g., ifinfomsg or tcmsg. The "tb" is the parsed netlink attributes. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Yonghong Song authored
There are no functionality change for this patch. In the subsequent patches, more netlink related library functions will be added and a separate file is better than cluttering bpf.c. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Yonghong Song authored
Among others, this header will be used later for bpftool net support. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Mauricio Vasquez B authored
The errno man page states: "The value in errno is significant only when the return value of the call indicated an error..." then it is not correct to check it, it could be different than zero even if the function succeeded. It causes some false positives if errno is set by a previous function. Signed-off-by: Mauricio Vasquez B <mauricio.vasquez@polito.it> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Mauricio Vasquez B authored
Signed-off-by: Mauricio Vasquez B <mauricio.vasquez@polito.it> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Jesper Dangaard Brouer authored
The compiler does an efficient job of inlining static C functions. Perf top clearly shows that almost everything gets inlined into the function call xdp_do_redirect. The function xdp_do_redirect end-up containing and interleaving the map and non-map redirect code. This is sub-optimal, as it would be strange for an XDP program to use both types of redirect in the same program. The two use-cases are separate, and interleaving the code just cause more instruction-cache pressure. I would like to stress (again) that the non-map variant bpf_redirect is very slow compared to the bpf_redirect_map variant, approx half the speed. Measured with driver i40e the difference is: - map redirect: 13,250,350 pps - non-map redirect: 7,491,425 pps For this reason, the function name of the non-map variant of redirect have been called xdp_do_redirect_slow. This hopefully gives a hint when using perf, that this is not the optimal XDP redirect operating mode. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Jesper Dangaard Brouer authored
The compiler chooses to not-inline the function __xdp_map_lookup_elem, because it can see that it is used by both Generic-XDP and native-XDP do redirect calls (xdp_do_generic_redirect_map and xdp_do_redirect_map). The compiler cannot know that this is a bad choice, as it cannot know that a net device cannot run both XDP modes (Generic or Native) at the same time. Thus, mark this function inline, even-though we normally leave this up-to the compiler. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Jesper Dangaard Brouer authored
Notice the compiler generated ASM code layout was suboptimal. It assumed map enqueue errors as the likely case, which is shouldn't. It assumed that xdp_do_flush_map() was a likely case, due to maps changing between packets, which should be very unlikely. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
- 06 Sep, 2018 4 commits
-
-
Alexei Starovoitov authored
Edward Cree says: In check_mem_access(), for the PTR_TO_CTX case, after check_ctx_access() has supplied a reg_type, the other members of the register state are set appropriately. Previously reg.range was set to 0, but as it is in a union with reg.map_ptr, which is larger, upper bytes of the latter were left in place. This then caused the memcmp() in regsafe() to fail, preventing some branches from being pruned (and occasionally causing the same program to take a varying number of processed insns on repeated verifier runs). Fix the instability by clearing bpf_reg_state in __mark_reg_[un]known() Fixes: f1174f77 ("bpf/verifier: rework value tracking") Debugged-by: Edward Cree <ecree@solarflare.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Taeung Song authored
After the commit eac7d845 ("tools: libbpf: don't return '.text' as a program for multi-function programs"), bpf_program__next() in bpf_object__for_each_program skips the function storage such as .text, so eliminate the duplicate checking. Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Dmitry Safonov authored
As Linus noted, the test for 0 is needless, groups type can follow the usual kernel style and 8*sizeof(unsigned long) is BITS_PER_LONG: > The code [..] isn't technically incorrect... > But it is stupid. > Why stupid? Because the test for 0 is pointless. > > Just doing > if (nlk->ngroups < 8*sizeof(groups)) > groups &= (1UL << nlk->ngroups) - 1; > > would have been fine and more understandable, since the "mask by shift > count" already does the right thing for a ngroups value of 0. Now that > test for zero makes me go "what's special about zero?". It turns out > that the answer to that is "nothing". [..] > The type of "groups" is kind of silly too. > > Yeah, "long unsigned int" isn't _technically_ wrong. But we normally > call that type "unsigned long". Cleanup my piece of pointlessness. Cc: "David S. Miller" <davem@davemloft.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: netdev@vger.kernel.org Fairly-blamed-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vincent Whitchurch authored
Currently, the only way to ignore outgoing packets on a packet socket is via the BPF filter. With MSG_ZEROCOPY, packets that are looped into AF_PACKET are copied in dev_queue_xmit_nit(), and this copy happens even if the filter run from packet_rcv() would reject them. So the presence of a packet socket on the interface takes away the benefits of MSG_ZEROCOPY, even if the packet socket is not interested in outgoing packets. (Even when MSG_ZEROCOPY is not used, the skb is unnecessarily cloned, but the cost for that is much lower.) Add a socket option to allow AF_PACKET sockets to ignore outgoing packets to solve this. Note that the *BSDs already have something similar: BIOCSSEESENT/BIOCSDIRECTION and BIOCSDIRFILT. The first intended user is lldpd. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 05 Sep, 2018 27 commits
-
-
YueHaibing authored
Fixes the following sparse warning: drivers/net/ethernet/microchip/lan743x_ptp.c:980:6: warning: symbol 'lan743x_ptp_set_sync_ts_insert' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
Fixes the following sparse warning: drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c:119:6: warning: symbol 'mlx5i_grp_sw_update_stats' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-next-for-davem-2018-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== This time, we have some pretty impactful work. Among the changes: * changes to make PTK rekeying work better, or actually better/safely if drivers get updated * VHT extended NSS support - some APs had capabilities that didn't fit into the VHT (11ac) spec, so the spec was updated and we follow that now * some TXQ and A-MSDU building work - will allow iwlwifi to use this soon * more HE work, including aligning to 802.11ax Draft 3.0 * L-SIG and 0-length-PSDU support in radiotap ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stanislaw Gruszka authored
Add validation check for wmm rule when copy rules from fwdb and print error when rule is invalid. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Gustavo A. R. Silva authored
Both old and new cannot be NULL at the same time, hence checking new when old is not NULL is unnecessary. Also, notice that new is being dereferenced before it is checked: idx = new->conf.keyidx; The above triggers a static code analysis warning. Address this by removing the NULL check on new and adding a code comment based on the following piece of code: 387 /* caller must provide at least one old/new */ 388 if (WARN_ON(!new && !old)) 389 return 0; Addresses-Coverity-ID: 1473176 ("Dereference before null check") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Sara Sharon authored
Some hardwares have limitations on the packets' type in AMSDU. Add an optional driver callback to determine if two skbs can be used in the same AMSDU or not. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Sara Sharon authored
Some drivers may have AMSDU size limitation per TID, due to HW constrains. Add an option to set this limit. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Sara Sharon authored
We have a TXQ abstraction for non-data packets that need powersave buffering. Since the AP cannot sleep, in case of station we can use this TXQ for all management frames, regardless if they are bufferable. Add HW flag to allow that. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Shaul Triebitz authored
Align to new 11ax draft D3.0. Change/add new MAC and PHY capabilities and update drivers' 11ax capabilities and mac80211's debugfs accordingly. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Naftali Goldstein authored
After masking the he_oper_params, to get the requested values as integers one must rshift and not lshift. Fix that by using the le32_get_bits() macro. Fixes: 41cbb0f5 ("mac80211: add support for HE") Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> [converted to use le32_get_bits()] Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Shaul Triebitz authored
For certain sounding frames, it may be useful to report them to userspace even though they don't have a PSDU in order to determine the PHY parameters (e.g. VHT rate/stream config.) Add support for this to mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Alexander Wetzel authored
Rekeying PTK keys without "Extended Key ID for Individually Addressed Frames" did use a procedure not suitable to replace in-use keys and could caused the following issues: 1) Freeze caused by incoming frames: If the local STA installed the key prior to the remote STA we still had the old key active in the hardware when mac80211 switched over to the new key. Therefore there was a window where the card could hand over frames decoded with the old key to mac80211 and bump the new PN (IV) value to an incorrect high number. When it happened the local replay detection silently started to drop all frames sent with the new key. 2) Freeze caused by outgoing frames: If mac80211 was providing the PN (IV) and handed over a clear text frame for encryption to the hardware prior to a key change the driver/card could have processed the queued frame after switching to the new key. This bumped the PN value on the remote STA to an incorrect high number, tricking the remote STA to discard all frames we sent later. 3) Freeze caused by RX aggregation reorder buffer: An aggregation session started with the old key and ending after the switch to the new key also bumped the PN to an incorrect high number, freezing the connection quite similar to 1). 4) Freeze caused by repeating lost frames in an aggregation session: A driver could repeat a lost frame and encrypt it with the new key while in a TX aggregation session without updating the PN for the new key. This also could freeze connections similar to 2). 5) Clear text leak: Removing encryption offload from the card cleared the encryption offload flag only after the card had deleted the key and we did not stop TX during the rekey. The driver/card could therefore get unencrypted frames from mac80211 while no longer be instructed to encrypt them. To prevent those issues the key install logic has been changed: - Mac80211 divers known to be able to rekey PTK0 keys have to set @NL80211_EXT_FEATURE_CAN_REPLACE_PTK0, - mac80211 stops queuing frames depending on the key during the replace - the key is first replaced in the hardware and after that in mac80211 - and mac80211 stops/blocks new aggregation sessions during the rekey. For drivers not setting @NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 the user space must avoid PTK rekeys if "Extended Key ID for Individually Addressed Frames" is not being used. Rekeys for mac80211 drivers without this flag will generate a warning and use an extra call to ieee80211_flush_queues() to both highlight and try to prevent the issues with not updated drivers. The core of the fix changes the key install procedure from: - atomic switch over to the new key in mac80211 - remove the old key in the hardware (stops encryption offloading, fall back to software encryption with a potential clear text packet leak in between) - delete the inactive old key in mac80211 - enable hardware encryption offloading for the new key to: - if it's a PTK mark the old key as tainted to drop TX frames with the outgoing key - replace the key in hardware with the new one - atomic switch over to the new (not marked as tainted) key in mac80211 (which also resumes TX) - delete the inactive old key in mac80211 With the new sequence the hardware will be unable to decrypt frames encrypted with the old key prior to switching to the new key in mac80211 and thus prevent PNs from packets decrypted with the old key to be accounted against the new key. For that to work the drivers have to provide a clear boundary. Mac80211 drivers setting @NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 confirm to provide it and mac80211 will then be able to correctly rekey in-use PTK keys with those drivers. The mac80211 requirements for drivers to set the flag have been added to the "Hardware crypto acceleration" documentation section. It drills down to: The drivers must not hand over frames decrypted with the old key to mac80211 once the call to set_key() with %DISABLE_KEY has been completed. It's allowed to either drop or continue to use the old key for any outgoing frames which are already in the queues, but it must not send out any of them unencrypted or encrypted with the new key. Even with the new boundary in place aggregation sessions with the reorder buffer are problematic: RX aggregation session started prior and completed after the rekey could still dump frames received with the old key at mac80211 after it switched over to the new key. This is side stepped by stopping all (RX and TX) aggregation sessions when replacing a PTK key and hardware key offloading. Stopping TX aggregation sessions avoids the need to get the PNs (IVs) updated in frames prepared for the old key and (re)transmitted after the switch to the new key. As a bonus it improves the compatibility when the remote STA is not handling rekeys as it should. When using software crypto aggregation sessions are not stopped. Mac80211 won't be able to decode the dangerous frames and discard them without special handling. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> [trim overly long rekey warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Alexander Wetzel authored
Drivers able to correctly replace a in-use key should set @NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 to allow the user space (e.g. hostapd or wpa_supplicant) to rekey PTK keys. The user space must detect a PTK rekey attempt and only go ahead with it when the driver has set this flag. If the driver is not supporting the feature the user space either must not replace the PTK key or perform a full re-association instead. Ignoring this flag and continuing to rekey the connection can still work but has to be considered insecure and broken. Depending on the driver it can leak clear text packets or freeze the connection and is only supported to allow the user space to be updated. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Reviewed-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Shaul Triebitz authored
As before with HE, the data needs to be provided by the driver in the skb head, since there's not enough space in the skb CB. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Wen Gong authored
Make it possibly for drivers to adjust the default skb_pacing_shift by storing it in the hardware struct. Signed-off-by: Wen Gong <wgong@codeaurora.org> [adjust commit log, move & adjust comment] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
When taking VHT capabilities for a station, copy the new fields if we support them as a transmitter. Also adjust the maximum bandwidth the station supports appropriately. Also, since it was missing, copy tx_highest and rx_highest. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
With newer VHT implementations, it's necessary to look at the HT operation's CCFS2 field to identify the actual bandwidth used. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
Depending on whether or not rate control supports selecting rates depending on the bandwidth, we can use VHT extended NSS support. In essence, this is dot11VHTExtendedNSSBWCapable from the spec, since depending on that we'll need to parse the bandwidth. If needed, also set/clear the VHT Capability Element bit for this capability so that we don't advertise it erroneously or don't advertise it when we actually use it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
IEEE 802.11-2016 extended the VHT capability fields to allow indicating the number of spatial streams depending on the actually used bandwidth, add support for decoding this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Shaul Triebitz authored
In AP mode, If AP advertises HE capabilities, set to true bss_conf::he_supported so that the Driver knows about it. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Shaul Triebitz authored
Same as for HT and VHT. This helps the lower level to know whether the AP supports HE. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Sara Sharon authored
The defines of IEEE80211_HE_OPERATION_VHT_OPER_INFO and IEEE80211_HE_OPERATION_MULTI_BSSID_AP have leading zeroes that makes the number look like it is bigger than 32 bit. This is misleading, remove it. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
Some drivers may want to also use the TXQ abstraction with non-data packets that need powersave buffering, so add a hardware flag to allow this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
Instead of open-coding the equivalent of le16_encode_bits(), just use that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
These checks aren't necessary, cfg80211 never passes NULL. Some static checkers complain about the missing checks on the next line, but really the NULL checks are unnecessary. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Ido Yariv authored
Export HE capabilities information via debugfs, similar to HT & VHT. Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
-
- 04 Sep, 2018 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Must perform TXQ teardown before unregistering interfaces in mac80211, from Toke Høiland-Jørgensen. 2) Don't allow creating mac80211_hwsim with less than one channel, from Johannes Berg. 3) Division by zero in cfg80211, fix from Johannes Berg. 4) Fix endian issue in tipc, from Haiqing Bai. 5) BPF sockmap use-after-free fixes from Daniel Borkmann. 6) Spectre-v1 in mac80211_hwsim, from Jinbum Park. 7) Missing rhashtable_walk_exit() in tipc, from Cong Wang. 8) Revert kvzalloc() conversion of AF_PACKET, it breaks mmap() when kvzalloc() tries to use kmalloc() pages. From Eric Dumazet. 9) Fix deadlock in hv_netvsc, from Dexuan Cui. 10) Do not restart timewait timer on RST, from Florian Westphal. 11) Fix double lwstate refcount grab in ipv6, from Alexey Kodanev. 12) Unsolicit report count handling is off-by-one, fix from Hangbin Liu. 13) Sleep-in-atomic in cadence driver, from Jia-Ju Bai. 14) Respect ttl-inherit in ip6 tunnel driver, from Hangbin Liu. 15) Use-after-free in act_ife, fix from Cong Wang. 16) Missing hold to meta module in act_ife, from Vlad Buslov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (91 commits) net: phy: sfp: Handle unimplemented hwmon limits and alarms net: sched: action_ife: take reference to meta module act_ife: fix a potential use-after-free net/mlx5: Fix SQ offset in QPs with small RQ tipc: correct spelling errors for tipc_topsrv_queue_evt() comments tipc: correct spelling errors for struct tipc_bc_base's comment bnxt_en: Do not adjust max_cp_rings by the ones used by RDMA. bnxt_en: Clean up unused functions. bnxt_en: Fix firmware signaled resource change logic in open. sctp: not traverse asoc trans list if non-ipv6 trans exists for ipv6_flowlabel sctp: fix invalid reference to the index variable of the iterator net/ibm/emac: wrong emac_calc_base call was used by typo net: sched: null actions array pointer before releasing action vhost: fix VHOST_GET_BACKEND_FEATURES ioctl request definition r8169: add support for NCube 8168 network card ip6_tunnel: respect ttl inherit for ip6tnl mac80211: shorten the IBSS debug messages mac80211: don't Tx a deauth frame if the AP forbade Tx mac80211: Fix station bandwidth setting after channel switch mac80211: fix a race between restart and CSA flows ...
-